HT5622 How to find my App email for finishly create my Apple id?

Thank you!

Hi Juspet,
If you are having issues verifying the email address associated with your Apple ID, you may find the following article helpful:
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/he68
Regards,
- Brenden

Similar Messages

How to find my app purchases for iTunes, I mean the receipt not the apps.

I have tried for months to find how to see my app purchases for my iPad2. Under support I can see a receipt so presume it's possible but when I follow the directions I am not finding, keep ending up on the screen for everything including purchased but that is all the apps. Also while I have you is there a way to delete useless apps. . The ones you try and don't like?

Try this ....Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

How can i make a email for my printer

how can i make a email for my printer to send the things to the email and get it printed if i was out of the house my printer model is 3525

Hi alhashmi_sy,
Welcome to the HP Support Forums. I see that you would like to learn how to setup the ePrint feature of your Deskjet Ink Advantage 3525 printer.
The first step is to connect your printer to your wireless network. Please follow the steps in the Installing the Printer Software for a Wireless Network Connection document for your operating system. If you have already setup your printer with a USB cable, each operating system section has the steps to switch from the USB connection to a wireless connection.
After connecting the printer to your wireless network please follow the steps for Getting the Printer Claim Code. Once you have the web services information sheet with your claim code please Set Up a Custom Email Address for ePrint.
You should now have a customized ePrint email address for your printer. If you run into any issues please let me know at what step things went awry and the contents of any error messages. Please also let me know what operating system you are using on your computer (whatsmyos.com). Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to find the workflow admins for all costcenters ?

Dear SRM gurus
We are using Classic scenario with N th step workflow with BADI.
we have a requirement.
How to find the workflow admins for the particular costcenters.
we used HRV1222A where ATTRIB EQ <Z attribute>(This is our own attribute to group all the costcenters)
used table HRP1001 to find the Admins but results are not correct because it is not showing my user id(I have all authorisations).
Is there anyway to find all the admins for a cost center(users are more than 7000+)
can anybody send work flow related presentations or cookbook
Thanks in Advance.
srinu

hi
I have not received any thing.Please send again
[email protected]
[email protected]

HOW TO FIND WF_ITEM_TYPE AND WF_ITEM_KEY FOR PO

제품 : MFG_PO
작성날짜 : 2003-05-14
HOW TO FIND WF_ITEM_TYPE AND WF_ITEM_KEY FOR PO
===============================================
PURPOSE
This solution is for Oracle Purchasing 11 and higher
Explanation
1. Start a SQL*Plus session using the APPS schema.
2. Run the following script and enter the Purchase Order number that is stuck
in process when prompted for the PO_NUMBER:
     SELECT WF_ITEM_TYPE, SUBSTR(WF_ITEM_KEY,1,25) "WF_ITEM_KEY"
     FROM PO_HEADERS_ALL
     WHERE AUTHORIZATION_STATUS='IN PROCESS'
     AND SEGMENT1='&PO_NUMBER';
3. If more than one row is returned, then run the following script and only
refer to the row that contains the OPERATING_UNIT_NAME that equals the
operating unit name tied to the responsibility used when the Purchase Order was
discovered as being stuck in process.
     SELECT SUBSTR(WF_ITEM_TYPE,1,12) "WF_ITEM_TYPE",
     SUBSTR(WF_ITEM_KEY,1,15) "WF_ITEM_KEY",
     SUBSTR(NAME,1,35) "OPERATING_UNIT_NAME"
     FROM PO_HEADERS_ALL PA, HR_ORGANIZATION_UNITS OU
     WHERE PA.ORG_ID=OU.ORGANIZATION_ID
     AND AUTHORIZATION_STATUS='IN PROCESS'
     AND SEGMENT1='&PO_NUMBER';
Example
Reference Documents
-------------------

Hi Kishore,
Welcome to SCN!
to find the sales order from Purchase order , go to SE16, Enter the table name as VBAK and press Enter.
In BSTNK field of VBAK, Enter the Purchase order number. System will return you corresponding sales order.
Hope this will help you.
Regards,
Nikhil

How to find next number range for project definition in tcode CJ20N

Hai Experts,
Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
Note: I searched in forum before posting, but couldn't find the solution.
Thanks
Regards,
Prabu S.

Hi,
For project defination internal number is assigned by system.
When you saves's project then system allocate one number to project defination, you can view it,
SE11 >>> table PROJ >> Click on contents >>> execute,
here you will get your project defination & number is assigned to project defination.
kapil

How to find classtype and class for a material.

Hi,
How to find classtype and class for a material.
which table contains this data.
Thanks
Kiran

Hi Kiran,
Check below sample code. Use this BAPI which will give all info about the class for the material.
DATA:      l_objectkey_imp    TYPE bapi1003_key-object
                                     VALUE IS INITIAL.
CONSTANTS: lc_objecttable_imp TYPE bapi1003_key-objecttable
                                     VALUE 'MARA',
             lc_classtype_imp   TYPE bapi1003_key-classtype
                                     VALUE '001',
             lc_freight_class   TYPE bapi1003_alloc_list-classnum
                                     VALUE 'FREIGHT_CLASS',
             lc_e               TYPE bapiret2-type VALUE 'E',
             lc_p(1)            TYPE c             VALUE 'P',
             lc_m(1)            TYPE c             VALUE 'M'.
SORT i_deliverydata BY vbeln posnr matnr.
CLEAR wa_deliverydata.
LOOP AT i_deliverydata INTO wa_deliverydata.
    REFRESH: i_alloclist[],
             i_return[].
    CLEAR:   l_objectkey_imp.
    l_objectkey_imp = wa_deliverydata-matnr.
*Get classes and characteristics
    CALL FUNCTION 'BAPI_OBJCL_GETCLASSES'
      EXPORTING
        objectkey_imp         = l_objectkey_imp
        objecttable_imp       = lc_objecttable_imp
        classtype_imp         = lc_classtype_imp
*   READ_VALUATIONS       =
        keydate               = sy-datum
        language              = sy-langu
      TABLES
        alloclist             = i_alloclist
*   ALLOCVALUESCHAR       =
*   ALLOCVALUESCURR       =
*   ALLOCVALUESNUM        =
        return                = i_return
Thanks,
Vinod.

HT1349 how can I change an email for authorization, the email address we used years back, is no longer a valid email address

how can I change an email for authorization, the email address we used years back, is no longer a valid email address

SfromW wrote: ... how can I change an email for authorization, the email address we used years back, is no longer a valid email address
How to change account here: http://support.apple.com/kb/PH1641
If you need more help, start here: http://www.apple.com/support/itunes/
SfromW wrote: ... we can't remember the password from the old email address (for authorization)...
Help Retrieving and changing passwords here: http://support.apple.com/kb/HT1911
If you need more help, from iTunes for Windows, click iTunes > iTunes Store > Support
SfromW wrote: ... apple should make it easier to transfer authorization authority....I would think anyways.
You might want to rethink your thoughts about making transferring authority easier. Making it too easy would certainly degrade your account's security. If you still believe it should be easier, you can send feedback directly to Apple via http://www.apple.com/feedback/itunesapp.html
You will not get a response, but you can be certain that the responsible Apple people will see your input for consideration in FaceTime product development.
As a new user, please understand that you are NOT directly addressing Apple here. For more info about Apple discussions, start here: http://discussions.apple.com/static/apple/tutorial/etiquette.html
Message was edited by: EZ Jim
Mac OSX 10.7.4

How to find out the Tcodes for the exits

Hi All,
how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
Customer Exits: EXIT_RFEBBU10_001
                          EXIT_RFEKA400_001
                          EXIT_RFFOEXIT_100
User-Exits: USEREXIT_DELETE_DOCUMENT
                   USEREXIT_FIELD_MODIFICATION
                   USEREXIT_MOVE_FIELD_TO_VBAK
                   USEREXIT_PRICING_PREPARE_TKOMP
BADI: CUSTOMER_ADD_DATA_CS
          HISTORICAL_VALUES
          MD_ADD_ELEMENTS
          MD_CHANGE_MRP_DATA
          MD_PIR_FLEX_CONS
          MD_PLDORD_POST
          ME_REQ_POSTED
          NOTIF_EVENT_SAVE
Can anyone help on this <urgency factor removed>.
Regards
Ksihore
Edited by: Suhas Saha on Feb 20, 2012 12:58 PM

i have just started reading about all these-user exits ,customer exits etc.
i have read somewhere that:call to customer exits are triggered by function modules exits.
the structure of function modules are like this:
EXIT_RFEBBU10_001
MEANS
Keyword EXIT followed by program name fllowed by three digits.
and the call is like this:
call customer function 0001.
From above we can conclude that this customer exit must be used in program RFEBBU10.
GOTO SE38 andenter prog name RFEBBU10.check for above function module.
for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
using Where used lists.
please Tell me if i m wrong!

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

How to find out the description for the given field?

Hi All,
How to find out the description for the given field?
I mean ETTYP Desription is VTEXT. This we can find in TVEPT Table. So, How canwe find this?
Thanks in Advance
Sri...

Hi Avi,
If i want to disply the fields like AUART and 'Description of AUART',
Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
my question is if i have given T184-AUART and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
Thanks in Advance
Sri...

URGENT: How to find out the Tables for Routines in BW.

Hi BW Gurus,
How to find out the Tables for Routines in BW.
I have this routine id <b>45XFAEI7LKIFIRDUKQG127YWW</b> and it is in inactive state and i want to activate it.
thanks in advance,
points will be rewarded.
Regards,
Maruthi.

Hi Maruthi,
Check table RSUPDROUT using the routine id as input for the field CODEID. You will get the technical name of the update rule.
Cheers,
Praveen.

How to find out the link for the tables for sub contract PO

Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.

Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK.

How to find the text id for the text in the sales order

Hi all,
How to find the text id for the item-text in the sales order?
There are different Text available in the sales order under item like Warehouse instruction, CSR instruction...
I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
Table TTXID contains the validation of the Text id.
Please help me in knowing the way to identify the text-id from the text list..
Thanks foryour help
Suresh Kumar

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

How do I schedule an email for future delivery on Mac mail client?

How do I schedule an email for delivery at a future date/time on my Mac mail client?

Hello DeeDubb11,
Unfortunately, you cannot do that with the officially Mac Mail client.
Best regards.

HT5622 How to find my App email for finishly create my Apple id?

Similar Messages

Maybe you are looking for