HT5622 I cant send messages to multiple recipient
I can't send itext or imsm multiples recipients
Settings > Messages > MMS Messaging and Group Messaging > make sure switch is ON (green side showing)
Similar Messages
-
I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered
Hi waqaskhan91,
Thank you for visiting Apple Support Communities.
If you're not able to send text or iMessages to certain contacts after updating your iPhone, start with the troubleshooting tips in this article:
iOS: Troubleshooting Messages - Apple Support
If you only see this behavior with a few contacts, you may want to try these steps first:
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Best Regards,
Jeremy -
Upgraded to ios6 on ipad2 now I cant send messages from imessage.
Upgraded to ios6 on ipad2 now I cant send messages from imessage. Any fix? I've rebooted/powered down and on again and in Settings turned messages off and on again. Still won't work...
I did speak a bit too soon it seems - while I can now send messages again from my iPad 2, it still doesn't show me messages that were sent to me via my telephone number. Which is weird, because in the "You can be reached by iMessage at:" setting I do have my telephone number checked.
At this moment I have set my iPad 2 and iPhone 4's "Start new conversations from:" setting to my Apple ID e-mail address. This way at least I can send messages *and* receive messages if people don't use my telephone number to send me messages...
So yes, you should probably wait a while before restoring your iPad 2 - it doesn't fix things completely. -
Bought an iphone 3gs. everthing was ok now cant send messages and screen not as sentative as it should be. HELP!!!!!!!!! please.
Hello masum007,
Thank you for the quick reply!
Based on the information provided in your post, I recommend performing a backup and recovery of your notebook's system. This can be done by following this document on Back Up Your Files (Windows 7), as well as Performing an HP System Recovery (Windows 7). This should help restore your system back to factory defaults.
If the issue persists, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Please help my phone says no service I cant send messages or make calls
You will need to contact your phone carrier to resolve your problem.
-
Cant Send Messages from Nokia N8
Hey All I Cant Send Messages From Nokia N8-00 The Error Which I M Facing Is Whenever I Type A Msg And Send It It Goes Directly To The Outbox When I M Resending it it is not being sent Please Help!
When a message failed, it always goes to the outbox or if you aborted it. Download the configuration for sms, gprs & packet data for your phone from you provider. Sometimes the wizard does not configure it properly.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR.. -
I cant send messages from my ipad?
i cant send messages from my ipad
More information would be important. No idea if you're talking about email messages or iMessage or something else entirely. If you're referring to iMessage, note that you cannot use that to text any non-iOS device... Only other iPads, iPods or iPhones.
-
I am connected to my Gmail account and my hostgator.com webmail account. Gmail works fine for sending/receiving, but hostgator cant send messages. I am using the default SMTP ports, and have even tried port 26 and still no luck. I was able to send mail using this configuration for months and have had no problems at all until yesterday. I do not know what changed, as Entourage works just fine.
Typically, Road Runner is a cable connection, and as is the case with several cable providers of broadband, the SMTP does not require separate Authentication -- they actually authenticate on the basis of the IP address stored in the modem they provide. In Mail Preferences/Accounts/Account Information click on the arrows beside the name of the Outgoing Server (as I think you have already mentioned finding), choose Edit Server List, and then choose the Advanced Tab. There you should check to use the Custom port, set to Port 25, and choose None as the method of Authentication. Remove any Username and Password entered there, and Save these settings. You should now be able to send with the RR SMTP. If you have a third party SMTP, then you may need different settings, so more info if that is the case.
Ernie
Message was edited by: Ernie Stamper -
Hello apple o cant send messages from my iphone what shold i do !!???
This is a problem with your carrier. You can contact them and ask why you cannot send text messages. Have you tried restarting your phone or restoring it yet?
-
Send message to multiple contacts from iphone
send message to multiple contacts from iphone
Open.a.new.text.message.and.add.one.contact.but.then.press.the.plus.button.that. is.on.the.right.side.of.the.name.to.add.others.
-
My iphone 3g has been reformat and i cant send messages..
pls help how can i downgrade my band pass??because my iphone 3g has been reformated and now i cant send messages because im using the sim card here in the phillippines...pls help??thanks
Restore it from a back up. But I understand your last one is may 19 th...
-
TS2755 cant send message when the 3G is on ?!
cant send message when the 3G is on ?!
unless i turn off the 3G the message wont be sent ,i called my service company for assitance , they sent to me an activation message for the SMS and asked me to reset the network settings , the problem still exits , i need you help please .(red exclamation mark ! ) not delivered , but i can recive sms and make calls normally , i just can't send sms unless i turn the 3G off , everything was fine till 3 days ago this problem started to happen .
-
Conditionally sending messages to multiple consumers
How would I best accomplish this requirement?
I have one system which produces messages
Multiple systems may want to consume those messages
I want the producer to be able to send messages conditionally
In one instance perhaps I send same message to each consumer
However in another case maybe I only want to send a message to consumers A and B
It would be OK if I could flag certain messages to be for certain consumers, and then those consumers only retrieve those messages designated to them. However I dont think this is possible as any such flag the consumer would have to read once it actually consumes the message and reads it, I dont think there is any way for the queue to make that decision for them.
So it sounds like what I need is a hybrid of point-to-point and publish-subscribe
I want a universal way to conditionally send messages to one or more consumers, and the conditions are dynamic.
Any suggestions?
Must it be a PTP with separate queue for every application?lozina wrote:
Interesting... message filters. I like it.
So with this approach, I can send some messages to everyone, and other messages I can have tailored to specific subscribers?pretty much.
But the subscriber does not actually have to "fetch" each message to determine if the message is meant for him or not, right? When using message filters this act at the queue, not at the client? Basically I want to avoid a client downloading 1,000 messages only to find out none of them are for him. unfortunately, that's probably up to the implementation. the implementation may choose to work that way (download every message and check it), or it may have a way of applying the filter at the server. however, the filters work only on the message properties, so the impl may be able to just get message headers and filter w/out getting the entire message. you'll have to test with the jms impl you are planning on using and see how that works.
Thanks!
[Edit] these are called Message Selectors right? yes.
And looks like they are specified at the time the client looks up the queue in JNDI?yes, these are provided at subscription time.
Now is this limited to publish-subscribe?no you can use selectors when subscribing to a queue as well. but, queues won't scale very well to lots of consumers (and are hard to manage with dynamic numbers of consumers). -
Mail: Cant Send Messages SMTP Error
When trying to send messages I get a SMTP connection error. I have found that the connection fails because the server name is incorrectly spelled. Mail seems to add my account name as an additional line in the server name. Example:
[email protected]:macmail
When I go to Mail>Preferences>Accounts>Edit Server List, the server is spelled correctly without the additional (:macmail) added on. Connection Doctor fails because of this misspelling and I cant seem to be able to stop mail from changing the server name. Any suggestions? Im stumped. Thanks in advanceTypically, Road Runner is a cable connection, and as is the case with several cable providers of broadband, the SMTP does not require separate Authentication -- they actually authenticate on the basis of the IP address stored in the modem they provide. In Mail Preferences/Accounts/Account Information click on the arrows beside the name of the Outgoing Server (as I think you have already mentioned finding), choose Edit Server List, and then choose the Advanced Tab. There you should check to use the Custom port, set to Port 25, and choose None as the method of Authentication. Remove any Username and Password entered there, and Save these settings. You should now be able to send with the RR SMTP. If you have a third party SMTP, then you may need different settings, so more info if that is the case.
Ernie
Message was edited by: Ernie Stamper -
Cant send message to other carriers
why i cant send pictures to other phone and without using imessage
Hello
Try this snippet:
REPORT ZTEST NO STANDARD PAGE HEADING.
TABLES: RFCDES.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-001.
PARAMETERS:
DEST LIKE RFCDES-RFCDEST OBLIGATORY,
MANDT LIKE SY-MANDT MATCHCODE OBJECT DDSEF4CLNT,
USER LIKE SY-UNAME MATCHCODE OBJECT USER_ADDR OBLIGATORY,
MESSAGE(255) TYPE C.
SELECTION-SCREEN END OF BLOCK BL1.
INITIALIZATION.
AT SELECTION-SCREEN ON DEST.
IF DEST IS INITIAL.
CONCATENATE SYST-SYSID MANDT INTO DEST.
ELSE.
ENDIF.
START-OF-SELECTION.
CALL FUNCTION 'TH_POPUP'
DESTINATION DEST
EXPORTING
CLIENT = MANDT
USER = USER
MESSAGE = MESSAGE
CUT_BLANKS = SY-LANGU
EXCEPTIONS
USER_NOT_FOUND = 1
OTHERS = 2.
CASE SY-SUBRC.
WHEN 0.
CALL FUNCTION 'POPUP_CONTINUE_YES_NO'
EXPORTING
TEXTLINE1 = 'Message was sent'
TITEL = 'Information'.
WHEN 1.
CALL FUNCTION 'POPUP_CONTINUE_YES_NO'
EXPORTING
TEXTLINE1 = USER
TEXTLINE2 = 'User not found !'
TITEL = 'Error'.
WHEN OTHERS.
ENDCASE.
END-OF-SELECTION.
Maybe you are looking for
-
In Mail on iMac, successfully running OS X Lion, one mailbox on My Mac for "Recovered Messages (from AOL)" keeps showing 1 very large message (more than 20 Mb) that I just cannot seem to delete. Each time I go into my In Box, the "loading" symbol spi
-
Hi there, I'm using Labview 7.1 and Windows 7. I built a VI and it ran perfectly yesterday. Today when I tried to run it, the following message appeared: Fehler 1 ist bei Open File+.vipen File aufgetreten Mögliche Gründe: LabVIEW: Ein Ausgabeparame
-
Installing 11gR1 CRS and receive error when executing root.sh on 2nd node of 2 node cluster
This is the error from the execution of root.sh on 2nd node of 2 node RAC cluster: dhzusbx98: /u01/app/crs # ./root.sh WARNING: directory '/u01/app' is not owned by root Checking to see if Oracle CRS stack is already configured /etc/oracle does not e
-
How to control the dynamic selections in FBL3N?
When I execute the Selection screen of the logical Database SDF, it shows me all the 4 segments - GL Master Record, Compnay Code, Document, Custom (I added this descritption). SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE SKA1. SELECTION-SCREEN DYNAM
-
Data Source Disappearing randomly
Hi, I am having a peculiar problem with Creator. Please go through steps Step 1: Created a datasource with following attributes <dataSources majVer="1" minVer="0"> <dataSource name="sardb" driverClassName="com.sun.sql.jdbc.oracle.OracleDriver" url="j