HT5622 I have set up my ipad but cant remember the 4 digit code I put in . I cloud does not seem to have any record of me and the ipad mini keeps locking me out as i try different codes - help please

Help please I have just got my Ipad Mini and set it up but cant remember the code I put in. I cant access settings or anything else as it has locked me out. Ive treid Icloud but it doesnt recognise tht I have registered. Can anyone give me straightforward instructions on how to start again please

This is the guidance from Apple:
http://support.apple.com/kb/HT1212
Barry

Similar Messages

  • HT4623 I tried to update my iPad to latest ios and it is now asking me for a password...4 digits.  I never had a password on it and it is too short to be my apple password.  Help anyone?  It keeps locking me out as I try different passwords.

    I tried to update my iPad to latest ios and it is now asking me for a password...4 digits.  I never had a password on it and it is too short to be my apple password.  Help anyone?  It keeps locking me out as I try different passwords.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • Just upgraded to an iPhone 4s but can't get it to sync with my Outlook Calender I have downloaded iCloud but that does not seem to have helped/

    Can anyone help I have just taken an iPhone4s but can't get it to sync with my Outlook calender I have downloaded to my PC the iCloud software but that does not seem to have helped at all?
    Thanks Bazzer50

    Do you see your Outlook calendar on the iCloud website?
    Do you see your iCloud calendar on your iPhone?
    This Apple article is a good place to start -> iCloud: Troubleshooting iCloud Calendar

  • How do I delete documents from my iPad that were added when it ran regular Acrobat, now that it has switched to DC?  The docs are not on the cloud, and DC does not seem to have a delete function for non-cloud docs.

    I use an iPad.  It automatically switched me from old-fashioned Acrobat to DC.  How do I delete docs that were put on my iPad with the old Acrobat?  They are not in the cloud, and DC does not seem to have a delete function for them.

    Hi,
    By default, Acrobat DC for iOS displays recently viewed files.  You need to switch to other file location (such as Local, Document Cloud, Creative Cloud) to delete, rename, move, or duplicate files.
    You can switch to Local, if you would like to see the files and folders that are locally stored on your iPad.
    Would you take a look at the following document to see how you can switch to other file location and delete files?
    How to manage files in Acrobat DC for iOS
    Please let us know if you have additional questions.  Thank you.

  • I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?

    I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?

    It depends upon how the other machines are connecting to your MBA:
    If the the other machines are also using wi-fi, they can connect directly to the wireless access point (router) without going through your MBA
    If the other machines are connecting to the MBA using ethernet you can share your wi-fi connection to them

  • TS4009 i have deleted items that seem to have filled my storage but it does not seem to have emptied/cleared it out.

    i have deleted items that seem to have filled my storage but it does not seem to have emptied/cleared it out. What step have I missed to clear out my icloud storage?  Thank you.

    How long was it in storage & what battery percentage was it originally stored with? You can kill Lithium batteries if they are not stored properly is why I ask.

  • I have down loaded a track which was initially missing 1min 30 seconds. iTunes enabled my to reload the rack which is complete on the PC. However, syncing with my Ipad2 does not seem to replace the incomplete version with the full version. Thanks S

    I have down loaded a track which was initially missing 1min 30 seconds. iTunes enabled me to reload the rack which is now complete on the PC. However, syncing with my Ipad2 does not seem to replace the incomplete version with the full version.  Can anyone out there help?
    Thanks S

    Thanks for the response. Unfortunately, I've un-checked the track and re-synced the Ipad as suggested, but then re-checking and re-syncing han no effect. The track is still missing the final minute and a half or so. I've tried it twice, but the effect is the same.
    Any other ideas? Would un-checking the entire music collection and staring again work, or is that a road to disaster?

  • After installing "Maverick" update m Epson V300 scanner software does to work anymore. Epson does not seem to have a compatible driver

    After installing "Maverick" update my Epson V300 scanner software does not work anymore. Epson does not seem to have a compatible driver (yet?).

    It's not just scanners, my WACOM graphic tablet no longer works, am told by WACOM support that Maverick will not recognise it as it is too old!!! Worked perfectly with X 10.8 but not any longer - am well cheesed off as its going to cost me a few bob for a new WACOM!!! Thanks Apple

  • Iphoto 9.6 does not seem to have the option of customizing the background of a picture with a mat text etc it did in the prior version for printing. It there a way to have that option?

    I updated from Snow leopard to Yosemite
    I needed to update iPhoto 8 to the newest version iPhoto 9.6
    the old version allowed me to customize my photo adding a mat  background colour text before printing
    The new version 9.6 does not seem to have that option (that I used often)
    Is it available and I just cannot seem to find it?
    I would appreciate help
    RJ

    For printing, you may want to download and install the BorderFX plug-in. It can add borders to a photo and watermarks and annotations when exporting from iPhoto.
    You can download it here:  BorderFX - iBorderFX iPhoto

  • I have just bought a iphone 4s of someone and it does not seem to have siri can anyone help me

    i have just bought an iphone 4s off someone and it does not seem to have siri can anyone help me

    If you are using English as your language, then Siri should be available.
    Have you registered your iPhone with Apple? If not, please do to confirm that you in FACT have an iPhone 4S.
    You can do so here:
    https://register.apple.com/cgi-bin/WebObjects/GlobaliReg.woa
    Or check your device without registering it here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • How do I adjust double click speed in Mountain Lion. The mouse system preferences does not seem to have a speed slider for double clicking. Only the tracking speed slider is visible.

    Double clicking is no longer opening my folders.
    How can I adjust the double click speed in Mountain Lion to reduce the double clicking speed. The mouse system preferences does not seem to have a speed slider for double clicking. Only the tracking speed slider is visible.

    For 10.8.3,  it's in System Preferences > Accessiblity > highlight Mouse & trackpad on the left.  The Double click speed slider shows on the right.  Moving it to the left gives you more time between clicks.  Moving it right gives you less time.

  • I just purchased a new to me ibook g4 I have all the disks but the cd does not seem to read them properly. I wanted to re install everythMost everything works anyway except my address book application , help how do I reinstall

    I just purchased a new to me ibook g4. I have all the disks but they do not seem to work properly. When I restart holding the C key they just spit out of the drive. I wanted to reset everything back to factory and start over but no go. Most everything works anyway except my address book application. It seems to be missing. How can I download and reinstall a new address book App. Thanks, John

    iBook G4/1.33 12-Inch (Mid-2005 - Op)
    1.33 GHz PowerPC 7447a (G4)
    Intro Date:
    July 26, 2005
    Disc Date:
    May 16, 2006
    Order No:
    M9846LL/A
    Model No:
    A1133 (EMC N/A)
    Subfamily:
    iBook G4 - Mid-2005
    Model ID:
    PowerBook6,7
    Std. RAM:
    512 MB
    Std. VRAM:
    32 MB
    Std. HD:
    40 GB (4200 RPM)
    Std. Optical:
    8X "Combo Drive"
    Complete iBook G4/1.33 12-Inch (Mid-2005 - Op) Specs
    The problem with accessing the content of the disks is the CD Drive does not seem to access them. It also has a heck of a time ejecting them. Other disks seem to read. The unit came with imovie disks and I can use them. The disks look perfectly good no scratches but they just don't work, I was hoping I could just get a online copy of the address book to replace the one that seems to be missing. Or find it somewhere on my drive. Have no clue where to look though. 

  • I have a Mac G4 (version=3.3)  How can I connect it to my BT Broadband.  It does not seem to have an AirPort card - do I need one and if so how do I get one?  Many thanks

    I bought a Power Mac G4 (version=3.3) second hand from my company.  It is running Mac OS 10.2.8 and Microsoft Office X.  I wish to connect it to my BT broadband hub.  However, it does not appear to have an AirPort card and even if it did I was told that the BT hub mainly works with microsoft rather than apple products.  Can anyone advise me how I can connect and what products I need to buy?
    Many thanks

    John Galt wrote:
    These are readily available on eBay etc. and are not expensive.
    See http://www.airportcardsdirect.com/ these cards are cheap and not sold via DOA-Bay.
    John Galt wrote:
    The PowerMac3,3 uses the original AirPort 802.11b card. It may also need a card adapter to enable it to mate with the internal connections - I'd have to check on that.
    Not true. Those adaptors were intended for the iMac G3 (long outdated) and only the iMac G3. All G4 machines just take AP Cards the way they are.
    John Galt wrote:
    You should also look into upgrading it to OS X "Tiger" but make sure you get the original retail install CD. It will be black with a large "X". Grey discs are machine specific and will not work.
    Actually I HIGHLY recommend upgrading to OS X Leopard. Tiger is no longer supported by hardly anybody (Apple, Adobe, etc) and Leopard is still the minimum for most things nowadays. If you want more life out of this Mac, then I would highly recommend installing Leopard. And as mentioned above you NEED a Retail DVD. (The Leopard DVD has a little Purple in the Center of the DVD and a BLACK X in the center.

  • In large PDF files my cursor moves around the page at warp speed. It does not seem to make any difference if I slow it down with Sys Prefs. This is not only in preview but also other programs to open PDFs.

    In large PDF files the cursor moves at warp speed with a mind of it's own, I've tried slowing it down in Sys Pref with no luck. On small files cursor action is normal. This happens in Safari, Preview and other programs that use PDF files. Sorry to say this does not seem to be a new problem with 7.# I've had it with prvevious versions of operating system Right now I'm using a Apple wireless mouse and key board. Using the USB keyboard and mouse the same problem does not go away.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • I complete and ordered a hardcover photo book.  Now, I would like to order the same photo book as a soft cover or wire bound.  IPhoto does not seem to have directions for this process.

    I completed and ordered a hardcover photo book,  Now I would like to order the same book but with a soft cover or wire bound cover.  IPhoto doesn't seem to have a feature which just lets me change the completed book to another type of cover.

    see my answer to your previous duplicate post
    duplicate the book in case of issues and use the change \theme button - select the same theme and the new format - preview (in case anything has changed) and order
    LN

Maybe you are looking for

  • Is it possible to sync an iPhone to one mac for music only and another mac for everything else? What about shared iPhoto?

    I'm trying to figure out the best way to manage my iphone and that of my wife. Our set up is that we share music that is on my imac under my apple store id.  We also like to have all of our photos in iphoto on that imac.  She has her own macbook and

  • Printer Setup

    Hello, I have installed Solaris 8 onto an Intel box. Now I would like to set up printing. In my case, the printer (HP LaserJet 4 Plus) is connected to a LAN based HP print server. How do I set up the Solaris box to print to this printer. If there is

  • Can you tell an image not to move despite page scrolling?

    Can I place an image (either in a div or not) that will remain where I placed it despite page scrolling? Say I want it at 0,0 but the page scrolls up and I want it to remain in that top left corner like a fixed background. Except it has to be without

  • Is oracle can do this

    Hi, i have a view that is doing uinion all with 3 tables. this view is big and results are about 80 milions rows. i'm selecting from this view and filtering base on another very small table (only 5 rows) oracle is not able to filter the rows in the v

  • Mail Contact Info changed - now no sync anymore

    Hi, i just changed the senders name in the Apple Mail application on my mac. Now my iPhone won't sync anymore aborting with the error: 'iTunes could not sync mail accounts to the iPhone "MY iPhone" because the iPhone canceled the sync.' Any ideas how