HT5622 In system preferences i cannot see I cloud on my I mac

I cannot see I cloud icon on system prefrences on my i mac

Should be in System Preferences as iCloud. Perhaps you need to try a reinstall. iPhoto is not part of OS X. Upgrades or purchases of iPhoto take place on the App Store.
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Similar Messages

I don't see iCloud on my system preferences I only see MobileMe

I don't see iCloud on my system preferences I only see MobileMe

If you're using a Mac, you have to update to OS X 10.7.5 or later in order to have iCloud in System Preferences.

Security & Privacy System Preferences pane cannot open!

my env:
- Max OS X 10.7.3
- 2.2 Ghz Intel Core i7
this month , i can not enter Security & Privacy pane from System Preferences
- when i click
- pop alert windows, tell some error
what can i do now?!

that magic is:
- my MacBookPro set up two user
- in my user, Security & Privacy System Preferences pane cannot open!
- but switch another user ,
open Security & Privacy System Preferences pane is OK?!
What make this happened?!

HT204053 my icloud is under "other" in my system preference i cannot open it

my icloud is under "other" in my system preference i cannot open it

Post a screenshot, and tell us what version of OSX you are using.

Cannot see messages in mailboxes 'on my mac' following restore

I had to restore my files from Time Machine following reinstallation of corrupted system files. The dealer who reformatted my disk created a new user account those name is different from the principal account that I used before the restore. But I restored all accounts from my Time Machine backup using the Migration Assistant, but now *I cannot see any of the messages that were stored in mailboxes "On My Mac"*. When I look at those mboxes in Time Machine, the messages are there, but I can't open them, even though I restored that account and logged in to that account; and that account is an administrator.
How can I access those messages?

If I open mail in the new acct that was created, I don't even see the boxes.
that's how it should be. Mail is set separately for different user accounts. I just wanted to check that you are accessing it from the appropriate account.
You can delete the account that the dealer set up for you. you don't need it.
Log into the restored account and go to the folder homedirectory/library/mail/mailboxes. Thre should be folders corresponding to thjose local mailboxes. open one and go to Messages. do you see the .emlx files with the messages? if no, they didn't restore properly. if the files are there you need to reindex mail.
quit Mail and delete the file homedirectory/library/mail/envelope index. start Mail and let it import (that means reindex). see if the mailboxes show up with the messages.

Is it possible to save System preference settings for every user that logins to a Mac OS X?

I work at a school and we have iMacs running Mavericks 10.9 in our environment. We have them binded to our Windows domain so that way students can use their own login to access the Macs. I have a number of System preference settings that I would like to take a effect, but I only see that these settings take effect for every user. So even if I login as the Main administrator account and set settings in System Preferences, such as not allowing the Wifi symbol to show, the next user that logins will still see the wifi symbol because the setting isn't taking effect for their System preferences. Does anyone know a way to get System Preference settings to take affect for every user that logins? Maybe a script?

Modifying the user template is not supported. You can Google for people who have done it in the past. I would recommend going to official route, if possible. Here are a couple of training documents. I'm sure there is more available though more official channels.
http://training.apple.com/pdf/wp_osx_configuration_profiles_ml.pdf
https://www.apple.com/education/docs/l521219b_osx_deployment_guide_030513.pdf
http://training.apple.com/pdf/wp_integrating_active_directory_mav.pdf

Why does most of the "system preferences" not load due to having an intel based mac?

I used to be able to access ALL of the items in "system preferences". Since the upgrade to Mavericks, which the Apple Store did for me, I cannot use most of them. It won't load my printer information. I cannot access security and privacy, users and accouts, parental controls, etc. Sometimes a window pops up and says "Preference Error" could not load.....pane. Or it will say "Preference Error" (and something like) cannot load ....... because it's an intel based mac. What the heck does that mean and why does it say that when I used to be able to access everything in the "System Preferences"? Please help! I'm sooooo frustrated and confused right now.

Since the upgrade to Mavericks
In order to get the correct troubleshooting suggestions, please, please pretty please, correct/update your system profile. Thank you
iOS is for mobile devices.

Trouble viewing new music on Itune11: i bought new songs and i cannot see them on iTunes on my mac but i can see on my iPhone. WHY????

I bought new songs with new I tunes 11 and i cannot see them on my library. Strange!! Because i can see them on my Iphone (on playlist recently added). Can someone help me?
Thank to everybody.

problem solved removing the authorisation of the computer and re-authorizing. but now i cannot add to an existing playlist because it say to me that this songs are not icloud playlisted? Why.....Maybe this new version need a lot of fix!!

Bought a new Mac Pro, purchased a Firewire to Thunderbolt adapter, then hooked up Epson Stylus Photo R2400 printer but the system preferences does not see the printer. Started, restarted, hit the " " to add a printer but no go.

How to connect via Firewire/Thunderbolt adapter an Epson Stylus Photo R2400 printer to a new Mac Pro

When you switch from USB to FireWire, you have essentially installed a new (i.e., different) Printer.
In the Add-a-Printer dialog, delete[-] the existing Printer queue which is set up for USB. Then, with the Printer connected via FireWire, Add [+] a new Printer queue and it should set it up correctly this time.
To go back to USB, you would have to delete and re-add in a similar fashion later.

HT4906 i have icloud on my mac and iPad. I took pictures, downloaded them to my ipad and backed them up on the iPad. I want to get them from the cloud to my mac. I go to system preferences, iCloud and see that photo stream is greyed out. it says I n

I have photos on my ipad and backed up to the icloud. I go to try to get them from the icloud to my mac pro and it says I need iphoto updatte, but when I go to update iphote it says no update available. what do I do to get my photos onto my computer from icloud

this article explains how to set it up and describes the requirements for different features
http://www.apple.com/icloud/setup/
LN

Cannot see my PC Vista from my Mac with OS-X Leopard but can the other way

I just upgraded to OS-X Leopard from Tiger. I had a good networking and file sharing going on with my PC running Vista before that. Now I am able to fully get to my Mac files from my PC but my Mac cannot even see the PC at all (nothing shows up when I click on "Network" in Finder). I have a wireless connection with Linksys. I can get to the internet and to my printer wirelessly from my Mac, but not to my PC.
Can someone help?
Thanks.

I set up both machines identically. When I go to see my shared drives the MacBook is there I just cant log in to see the shared files. From the Mini it doesn't event give me the option to sign in under a specific user it just tries to connect and I get the message.

My Daughters Dell PC cannot see my Airport Extreme whilst my Mac's can

Hi
I used to have an old Airport extreme and had all the household computers running great with good internet speed. I have just bought a new Airport extreme(after old one broke) and it works fine with the Mac's. However my daughters PC cannot even see it. Other networks are appearing in the available networks window on the PC and I have full strength on my Powerbook sat next to her PC. Please Help
Tony L
iMAc G3/4/5, Powerbook G4 Mac OS X (10.4.3)

Yes,
I have tried this, going through all the channels with no success. I am sure it must be small problem - just can't seem to track it down. Cheers TL

Im trying to export a video to AVI but cannot see the option, Im on a mac. Is this option a windows only option?

The company I work for use AVI videos for Nuendo and I have recently installed my Adobe CC to test efficiency in creating video files for our clients. making QT is a piece of cake but cannot seem to find an option to create AVI anywhere. Would this option be available if I were to install Adobe CC on a Windows machine or is there no longer any support for AVI?

AVI is windows only.

Window Active Directory users cannot see home drive when logon to Macs

This problem just occurred, so that tells me either 10.4.9 has done it or a security update to Windows 2003 Server.
Looking for any tech saavy network guru to help.
Windows 2003 Server houses active directory. Users in the past were able to log on to a Macintosh computer and their home drive would appear on the desktop.
Now 'all of a sudden' any user that logs onto a Macintosh computer with an AD account does not see their home drive on the desktop.
Has anyone else had this problem? Any suggestions on how to resolve it? I haven't unbound the Mac from AD yet will try that tomorrow.
JTS

Fixed this...a corrupted keychain item that contained the users prior used network password was the culprit.
Once I delted the corrupted keychain, active directory users can log on a Mac and see their home directory on the desktop.
JTS

Cannot see html pages LOCALLY STORED on Mac drive, using Parallels Desktop?

Using Parallels Desktop running Windows XP, I cannot use Safari 3 to view HTML files stored on my Mac - no matter how I try!
If I locate the file within Windows Explorer and I right-click and choose "Open With > Safari Web Browser" Safari will open, but it will only open a blank window and nothing loads (the Status Bar remains blank).
If I open Safari and choose "Open File..." and navigate to the file on my Mac and click "Open" I get an error message which states:
Safari can’t open the page “file://.PSF/Macintosh%20HD/..."
etc.
Note that the URL it is trying to open begins with:
“file://.PSF/"
whereas doing the same thing from within Internet Explorer shows the URL to begin with:
"\\.PSF\"
without the "file" part. Also notice the BACKslashes, rather than FORWARDslashes.
Lastly, trying to open a blank Safari window and drag-and-drop the HTML file from Windows Explorer directly into the Safari window results in exactly the same problem.
Note that ALL 3 of the above-mentioned methods DO work in Internet Explorer.
Finally, even copying-and-pasting the local URL that DOES work in IE into Safari's Address Bar doesn't work either. The problem this time is that not only does Safari turn all the backslashes into forwardslashes, but it also adds "http:" to the beginning of the URL, when it was not in the originally-copied link, which began with "\\.PSF\".

Again, thanks for taking the time to reply - but you're really really not paying attention to what I'm saying...
I AM giving Safari the full pathname, but when using Parallels Desktop, this full pathname begins with "\\.PSF\". That's how it starts. Nothing else before the two backslashes, OK. That's how it works in Internet Explorer when using Parallels Desktop. That's how it works in Windows Explorer when using Parallels Desktop.
I have given Safari the full pathname in FOUR different ways, as I mentioned in my original post: right-click, open with / file>open / drag-and-drop / copy-paste-URL.
With regards to my particular issue, I'm not concerned about how it works when using Windows running natively on a "proper" Windows PC. I am concerned about how it works when using Parallels Desktop.
If you really want to know the full URL (not that it matters one jot) of an example file that I can open with Internet Explorer, but not with Safari, here's the URL of the file I was originally trying to test:
\\.PSF\Macintosh%20HD\Work\Downie\Website\HTML\index.html
That's it. Everything is there. I have not left off anything at the beginning of that URL.
That's how it works in Internet Explorer when using Parallels Desktop. OK, re-read that. It works in Internet Explorer when using Parallels Desktop.
When I copy that URL exactly as it is, and paste it into Safari and hit return, Safari automatically converts it to:
http://.psf/Macintosh%20HD/Work/Downie/Website/HTML/index.html
Note how it has altered it in several respects:
- It has added "http:" to the beginning of the URL.
- It has turned the original "PSF" into a lower-case "psf".
- It has turned all the backslashes into forwardslashes.
I try manually deleting and altering the relevant parts and hitting return again, but Safari just goes back to the "wrong URL".
When you say "the only prefix for local files is file://" you are obviously not familiar with how Parallels Desktop works with and reads "local files".
Remember what I said earlier about how you're not REALLY looking at LOCAL files, because TRUE local files would be on the Windows section of the drive, and I am trying to look at files on the Mac part of the drive.
I'll repeat what I said earlier:
If you are not testing this from within Parallels Desktop like I am, and where I am having the problems, then your words here are not of much use, because you cannot experience what I am experiencing. You cannot comment on the experience on how this works from within Parallels Desktop if you do not have Parallels Desktop and have not experienced it yourself.

HT5622 In system preferences i cannot see I cloud on my I mac

Similar Messages

Maybe you are looking for