HT5622 my files are just disappearing I'm so mad right now.
I was working with page yesterday and it just disappeared. And I was working on keynote and saved it in iCloud. Guess what happened, it just vanished. It fling vanishied. What's wrong with this ****
I was working with page yesterday and it just disappeared. And I was working on keynote and saved it in iCloud. Guess what happened, it just vanished. It fling vanishied. What's wrong with this ****
Similar Messages
-
Desktop files are sometimes disappearing.
When I start my computer my desktop files are sometimes disappearing and when I tell the computer to organize the desktop they will return. I have been using Mac's for 15 years and never have I had this problem until I updated to OS X Mountain Lion. Can anyone tell me how to fix this. Is it possible this problem is because I use two monitors?
Thank you for any help.
MarkPlease read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
hav ipad 2 and it is deactivated and now i m trying to it reactivated but it is not done error comes "we are not able to activate your ipad right now"..can anybody suggest what can i do for activation my ipad 2?
Have you tried plugging your iPad to iTunes?
-
.mp4 and .mov files are just LARGE
Sorry, without posting all the encoding details, is there an obvious reason why my .mp4 and .mov files are ~10x the size that they should be after AME? I'm talking about files that are 30mb .mp4's before and 300mb.mov afterwards. If you need details I'll post. Thanks.
File size is determined primarily by only two factors - duration and bitrate. The codec used, resolution, frame rate, etc. all have little or no effect on file size.
Duration, and bitrate. If you want a smaller file, one or the other of those has to be reduced. -
Files are just popping up for no reason.
Everytime I open a file, all files from that application pops up as well. Is there a bug somewhere or have I messed the options up
You're describing the Resume 'feature' of lion, where windows of apps you had open at the time of shut down are re-opened either when you boot up, or, when you next launch that particular App.
Frustrating, isn't it?
You can go sys pref> general and uncheck the box ''restore windows when reopening apps'' and also when you shut down, uncheck the box saying ''Reopen windows when logging back in''. This box defaults to checked, and is a nuisance. -
Applications and files are all disappearing
After initially having trouble with opening a file in Adobe Lightroom, I have now discovered that everything on my computer is slowing disappearing or erasing itself. For example, I went to go look at my pictures and found that all the folders existed, but there was nothing in them. I also have nothing in my documents. Most of my applications in my dock had a question mark over it, except for those that were open, but when I closed it and tried to reopen, the question mark appeared so now basically I have a dock full of question marks. I then decided to try and open the applications through Finder, only to find them all zero kilobytes in size. While this is the case, when I click on Macintosh HD in Finder and look at the info, it says 500gb have been used despite the fact everything seems to be zero kilobytes. I am at a loss at what to do and would appreciate any help.
WOW!!!
http://support.apple.com/kb/HT2963 - scroll to the *"Application installers, Applications folder"* section.
Disconnect all peripherals from your computer. Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select *Disk Utility.*
Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
Click _*Repair Disk.*_
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
HTH -
can anyone tell me ??
Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select ▹ Restart from the menu bar. -
How can I perform the conversion of .pdf files in Cyrillic script to Word files in Cyrillic script. The .pdf file is too small for me to read without a magnifying glass, and the document is more than one thousand pages.
This answer was not helpful. First of all, I could not find "tech specs"
anywhere on the Acrobat 11 homepage. And secondly I purchased this software
for the specific purpose of converting .pdf files to Word. It was only
after I had completed the purchase that I learnt that Acrobat does not
permit the conversion of .pdf files in Cyrillic to Word files in Cyrillic.
I feel that Acrobat should have provided this crucial information before I
allowed my credit card to be debited. That is why I am now asking for my
money back. But thanks for your attempt to solve my problem, even if it was
not successful.
Julyan Watts -
So I live with 3 others who already had a router running. So for ease Id like to use this device as purely an external hard drive and occasionally back-up my files and store photos/video etc. Is it possible to use this device strictly for that or do I need to constantly give it an internet connection and back-up over wifi that way...?
Suggest that you consider the option to configure the Time Capsule to "join" the existing wireless network there and backup over the wireless. The Time Capsule functions simply as a wireless hard drive in this type of configuration.
Open AirPort Utility and click Continue to to follow the guided setup to configure the Time Capsule. Select the "Join a current network" option when it appears and then choose the option to have the Time Capsule "wirelessly join the network" on the next configuration page.
Continue to follow the prompts to complete the configuration. -
At one point I had a DVD burner on my machine. However, after I would burn the DVD and go back to test the files (paranoid), filenames and files would randomly start to disappear. I've since purchased another DVD burner think the last was faulty and found that it was not the case.
Does anyone have any ideas?
Sample: http://www.typegirl.com/temp/disappearing.pngI have had the same problem with different discs on different Superdrives (in Powerbooks, Macbook, eMac), but which work fine in PCs or my Xbox. On the Mac, files can just disappear from the DVD if I click on them or copy them. Sometimes I can get at them if I eject and reinsert, but not always. It's very annoying!
The discs are high quality DVD-R burned and verified in Toast 6 UDF format at 4x.
Help -
Trying to consolidate 261K+ of images within LR4 between two drives. Someone who was "helping" me with my Library in LR4 for some reason took some but not all of the file folders from my main backup drive (M) and duplicated them onto a partitioned hard drive (E) directly on the computer. The duplication is huge, so I am trying to condense them all back onto the original backup drive M, particularly since I believe there are also folders on the partitioned backup drive E that do not appear on the main one M, and there are many more file folders on M that are not on E, so that is the destination drive.
CONSOLIDATION: When I try to drag either the file folders or the individual files from the duplicate drive E to the original drive M to combine the two drives since the folders in many cases for some reason are not identical, sometimes LR4 says the files already exist when they clearly don't. Other times it allows me to drag and drop all files, even if the exact duplicates are already on the destination drive, thereby doubling the number of files per image and creating more duplicates. Right now I am opening each file folder on the duplicate drive E, looking at what extensions and file names are there, scrolling to the original drive, making sure they appear to be identical, then going back to the duplicate drive E, deleting the images in the folder, removing the folder, and moving to the next folder on the duplicate drive E. *There has got to be a simpler way.*
CONSOLIDATION APPROACH: I did start to create file folders names A, B, C and group file folders under them to reduce clutter, since those header folders can be closed down when not in use, but now I am wondering if I should have done that alphabetization to the main backup drive rather than to the partitioned backup drive.
My goal is to consolidate the two drives down to one, delete as many images along the way that I know I will never miss, then backup the catalog and export it to an external drive and then copy that to yet another drive for offside storage. Does this sound like the proper plan? Last time it took almost 24 hours and over a terabyte to export the catalog.
DUPLICATION: I also have many file folders that have the exact same image in them. One portfolio image may actually be in eight different folders, with the exact file, file name, file size, and date, even though I always have checked "no duplicates on import," How can this be? What is the best way to sort through duplicates? Why are the files in some of the duplicate folders not in numerical order? If I do a search and call up a file # and find 15 duplicates, the only way I can find where those duplicates reside is to take each duplicate, right click to Locate Folder in Library, then once I find it, I have to go back to All Photographs>Text.search for file #, go to the second duplicate, right click to Locate Folder in Library, then once I find it, I have to do it all again. Is there a simpler way to see all the occurrences in their respective folder locations at once?
SEARCH BY FILE FOLDER NAME ONLY: I also find I can't search for a file using a folder name (for example, "John_Doe"). I can only search by file #, keywords, or camera/lens/date, etc. Why will it not work to use All Photographs>Text>search for Doe? In other words, if I didn't keyword the individual files as John Doe, I can't search for them by that moniker.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
FOLDER LIST PRINTOUT: Is there a way to print out the Folder list (other than a screen shot)? I have so many file folders on each drive since I sort not by Year/Month/Date but by subject. It makes trying to compare duplicate folders quite unwieldy.
SLOW RESPONSE: And finally, as though that weren't enough, why does LR4 continually blink to a white screen after each keystroke? Takes forever just to be able to click through images, view info after hovering, etc. All other programs are closed down and the operating system shows very little memory being used.A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really -
OK my notes are disappearing and have been for the last week or so now and I was just wondering why it's doing that and if I can do something about it to stop? Cause it's really annoying that it's out of nowhere that they are just disappearing on their own. I have tried pretty much everyone to make it stop cause I have one other note that does not disappear but my other notes have been disappearing with me doing anything to it.
CAN THIS POST BE DELETED PLEASE?????????
-
Can't login as an admin, log files are going nuts,HELP!
The heart of the matter:
1) About a year ago I realized my ASL log files were growing out of control (about 30gb right now)
2) I d/led Omni DiskSweeper and Yasu
3) I started using Yasu regularly and it seemed to keep things a lot cleaner
4) Suddenly, out of nowwhere I started getting warnings again that my hd was full but
I couldn't log in as an admin, it rejected the passwords I'd set years ago and I was unable to reset
to a new password with the startup disk (the new password is never recognized when I reboot)
5) Yasu completely stopped working, now every time I try to launch it it says
"error dscl_cmd DS Error -1436 (eDSRecordNotFound (56)"
I'm not that comfortable getting under the hood or using console. Is a complete reinstall the easiest/only fix? One more wrinkle I d/led MacKeeper recently but found it useless and irritating cause of my login issue so dumped it.
Thanks so much!Regarding MacKeeper, make sure you remove all associated files ...
To Completely Uninstall and Remove Zeobit's MacKeeper
Download and Install AppCleaner
Download and Install Find Any File
Run AppCleaner
Click on Applications
Select MacKeeper
Click on Search
Select all results
Click on Delete
Run Find Any File
Search for zeobit
Select and Delete all results (except for those already in the Trash)
Search for mackeeper
Select and Delete all results (except for those already in the Trash)
Open Up Keychain Access
Search for zeobit
Select and Delete all results
Search for mackeeper
Select and Delete all results
Secure Empty Trash
Reboot
Unless you perform all of these steps, you'll have remnants of Zeobit's MacKeeper app. I had installed MacKeeper several weeks ago, when I had accidentally deleted some files on my Mac -- hoping to use their "undelete" feature. This was when my nightmare began. Even after using AppCleaner to remove it, there were still some background processes that were running every 10 seconds. While probably harmless, this adds unnnecessary strain on the Mac.
The key was also using Find Any File and delete any entries in the Keychain Access.
Download Links
AppCleaner - http://appcleaner.en.softonic.com/mac
Find Any File - http://www.macupdate.com/app/mac/30079/find-any-file
I hope this helps!
Frank -
iPhone 5 (64GB)
iTunes 11.4.0.18 (64-bit Win7)
Just updated my iPhone 5 to iOS8 and most of my music disappeared. Attempted to sync with iTunes to get it back but iTunes now says I am 26GB over capacity and "Other" files are taking up just over 29GB! What is going on and how do I fix this?I had restored my iPhone 5 to factory settings and that cleared the problematic "Other" problem. Flash forward a couple weeks and the problem has once again resurfaced.
I tried updating iTunes and iOS to the newest versions and the problem still persists.
I'm officially ready to switch to Windows Phone or Android now...
*edit*
A Google search with results restricted to the last month shows that this problem seems to be becoming more and more common.
https://www.google.com/webhp?sourceid=chrome-instant&rlz=1C1CHFX_enUS506US506&io n=1&espv=2&ie=UTF-8#q=itunes+other+space+iphone+site:discussions.apple.com&tbs=q dr:m -
I have just downloaded itunes 10.6 and in the process my "podcast" option under library has disappeared! THe files are still on my laptop. I can also see some of my recorded music in the itunes library but can't play them - there is an exclamation mark next to each track. Basically I can't use itunes - is the only option remove and replace? Thanks in advance
Visibility of the Podcasts section is controlled from within the Edit > Preferences dialog.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
Missing tracks
Typically this can happen because a file or folder is accidentally shunted to the wrong location. iTunes can also get confused if it expects to be talking to an external drive which isn't there. If will often reset the default media folder location and may have trouble finding files in the old folders.
Select one of your tracks that is missing in action. Press CTRL-I to Get Info. Cancel when asked to try to locate the file, then look at the location given on the summary tab. This where iTunes thinks the file ought to be? Now find out where it actually is. Post back the two locations for comparison. I should be able to give you some steps to reconnect everything once I can determine which of the things that might have gone wrong is most likely in your case.
When you get it all working make a backup!
tt2
Maybe you are looking for
-
I have set up a new external hard drive and Im trying redirect LR to the new hard drive. I have over 30,000 photos and Im trying to see to see if there is a way to all photos located without having to go thru each folder at a time
-
I have an IPod, an IPhone and an IPad. ITunes previously opened my device when I connected it to my computer, listing the device in the left column. Now the devices do not appear and I cannot manage my playlists. What has happened?
-
How to trace sales order number from delivery number, when batch is split
Hi All, I have created a Sales Order and a Outbound Delivery against the sales order. While creating the Outbound delivery, I have split the qty in two batches. Now when I go in table LIPS, and search on the basis of the Delivery number, I get two ro
-
Accessibility and Pdf Portfolios
Everything we put on the Internet must be ADA compliant. There was some discussion with previous versions of LiveCycle forms inside a PDF portfolio possibly not being compliant because of the navigation issues inside the portfolio itself. Does anyone
-
Configure Solaris 10 with ath wireless card
So I'm in over my head on this one. I got a new laptop to tinker with, put OpenSolaris on it - integrated Broadcom wireless card didn't work, but my old DLink wireless card did. Yay. But I didn't like OpenSolaris. Too linux-y. So I went to something