HT5622 What is the purpose of having two emails one for iCloud one for Apple ID

Why would I use two different emails and passwords? What is the benefits if I use one email for iCloud and one for my Apple ID .

From where I have seen this most helpful is when you have multiple people (family memebers) sharing one Apple ID/iCloud account and you run out of the free 5GB iCloud back up space since there are many devices backing up to the same account.
We've seen students using his/her parents or family Apple ID/iCloud account and when they go to back up their device or apps with data connected to iCloud (like iMovie/Notability), it won't back up b/c they are out of space. Mom's iPhone with 4GB of photos on it is hogging up all the iCloud back up storage so when Sally needs to back up her school iPad to iCloud, there's not enough space so her device/data doesn't back up completely. If Sally creates her own iCloud account, then she's got the full 5GB to use and doesn't have to worry about the other devices.
Also, if you had a work issued device and a personal device but use the same Apple ID- you could create different iCloud accounts for each device for back up. I myself use the same account- I don't seperate out mainly b/c I don't want to keep up with another apple account and I don't use a lot of apps that need to retain data.

Similar Messages

What is the purpose of having 'oracle' user with umask 022?

Hello,
What is the purpose with having the 'oracle' profile with a umask of 022? Isn't that a security risk having files created by 'oracle' with 755 permission? I mean why let others have the capability to read and execute on files that 'oracle' writes. Thank you.
Paul

Hi;
You can set it as you wish. But from note:
The umask utility sets the file mode creation mask of the current shell execution environment to the value specified by the mask operand. This mask affects the initial value of the file permission bits of subsequently created files. If umask is called in a subshell or separate utility execution environment, such as one of the following:
+(umask 002)+
nohup umask ...
find . -exec umask ...
it does not affect the file mode creation mask of the caller's environment. For this reason, the /usr/bin/umask utility cannot be used to change the umask in an ongoing session. Its usefulness is limited to checking the caller's umask. To change the umask of an ongoing session you must use one of the shell builtins.
If the mask operand is not specified, the umask utility writes the value of the invoking process's file mode creation mask to standard output.
The most common umask values are 022, 027, and 077. A umask value of 022 lets the owner both read and write all newly created files, but everybody else can
only read them:
Oracle recommended(also its a prereq for installation) to set umask 022 due to do upper explanation.
http://docs.oracle.com/cd/E19253-01/816-5165/umask-1/index.html
Regard
Helios
Source:
+0666 Default file creation mode+
+022 resultant mode+
+0644 resultant mode+
On many UNIX systems, the default umask is 022. This is inherited from the init process, as all processes are descendants of init.

HT201342 What is the difference between an @me email and an @icloud email address?

What is the difference between using an @me email address for iCloud and the new option of an @icloud email address offered?

The @icloud address operates like an alias to your @me address. Any email sent to either your @me or @icloud address is routed to your current @me inbox. It's just another address that you can use as an alternative to your @me address if you want.

What are the benefits of having two video cards?

I currently have a PNY Nvidio quadro FX 3800 video card installed. I have another card that is not installed. It is an EVGA E-GEforce 8800GT. I only want to run two monitors. I am thinking with two video cards I will have live preview on screen during HD video capture. Is this correct? What if any other benefits will I get from running two video cards?

Hello
I am using CS5 with a quadro 4000 card. I have two Eizo's attached to the quadro 4000 via the display port. Everything is working fine. I need to connect a plasma screen to my pc (3 monitors total) for viewing red files. I could use the red rocket to export video to the plasma screen but it would be nice if I didn't have to install another driver other than the quadro 4000 nvideo driver. My question is, will having 2 video cards installed in my pc cause any problems? If it will, I will have to use the red rocket for the third monitor. Thanks
Bill Martz

What't the purpose of having a hidden column in the report

Hello experts,
So, since I am still fresh to the business I encountering things worth exploring... I have seen many times where a report will have a certain column in the criteria but its hidden from the analysis results. Does anybody why
eg.. the criteria will have: time, project name, project task. then the results will show: time and project task, then project name will be hidden... why?
thanks as always

Project tasks might be common for different projects, to make more specific they might have added project name and set hidden to see tasks specific to project name by date.
To understand it more just delete project name from report and compare with original report output.
If make sense mark

What is the difference between these two reports MC.1 and MB5L

Hi
what is the difference between these two reports MC.1 and MB5L?
what is the Purpose of each report?
Material ledger is activated for this plant, we found some amount difference between these two reports, my client accounting department used to compare these two reports while year end/month end closing
Thanks
Raju

MC.1 will give you the report for plant analysis as per plant .
MB5L report will give you list of stock value as per G/L account wise.

Having Two different Servlet applications on one EJB applciation

Hi,
I am running two web applications on tomcat servlet engine
and one on orion servlet Engine both Access EJBs deployed on Orion application server which has the web app also.
what are the consequences of having two different webapps
accessing same EJB app in Real Time
Thanks
Jay

It's one of the expected usage models. You often see people doing wireless this way, as a separate webapp pointing to the same set of EJBs.

What's the purpose for the two Wireless Antennas on a WAP?

I have a very simple question, that I'm a little confused about. Here it goes.
Most Access Points have two antennas. One is labeled as LEFT/PRIMARY and the other is RIGHT.
What is the purpose for the two antennas? When I have one antenna connected it works without any issues. Can I just use the LEFT/PRIMARY antenna for wireless connectivity? What are the purpose for the two?
And we are talking about a single band, 802.11b/g NOT 802.11a.
Thank you!

Hi Rashida,
The use of two Antennas on these AP's is used for "Diversity Mode. In many cases, 1 single Antenna will work nicely. Here is an explanation for the use of two Antennas :)
This describes the use of 2 **Identical Antennas in "Diversity" Mode;
The purpose of diversity is to overcome multipath reflections. Diversity antennas that share the same physical housing are placed at an optimum distance apart. The maker of the particular antenna determines that distance based on the characteristics of the antenna. When you use a pair of antennas with matching characteristics to provide diversity for cell coverage in your facility, the guideline is to put those matched antennas at a distance apart from each other that is equal to a multiple of the wavelength of the frequency that is being transmitted. The 2.4 GHz wavelength is approximately 4.92 inches. Therefore, to support diversity on a 2.4 GHz radio with two separate antennas, the antennas should be spaced approximately 5 inches apart. The antenna pair could also be spaced at multiples of 5 inches, but the distance between should not exceed 4 multiples: reflected waves farther apart than that are likely to be so distorted and different in delay spread that the radio could not work with them.Because each antenna is selected by itself, both antennas must have the same radiation characteristics and be positioned to provide similar cell coverage.
**** Two antennas connected to the same access point must not be used to cover two different cells.****
From this good doc;
Multipath and Diversity
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008019f646.shtml
A diversity antenna system can be compared to a switch that selects one antenna or another, never both at the same time. The radio in receive mode will continually switch between antennas listening for a valid radio packet. After the beginning sync of a valid packet is heard, the radio will evaluate the sync signal of the packet on one antenna, then switch to the other antenna and evaluate. Then the radio will select the best antenna and use only that antenna for the remaining portion of that packet.
On transmit, the radio will select the same antenna it used the last time it communicated to that given radio. If a packet fails, it will switch to the other antenna and retry the packet.
One caution with diversity, it is not designed for using two antennas covering two different coverage cells. The problem in using it this way is that, if antenna no. 1 is communicating to device no. 1 while device no. 2 (which is in the antenna no. 2 cell) tries to communicate, antenna no. 2 is not connected (due to the position of the switch), and the communication fails. Diversity antennas should cover the same area from only a slightly different location."
Diversity Antenna Systems
Diversity antenna systems are used to overcome a phenomenon known as multipath distortion of multipath fading. It uses two **identical antennas, located a small distance apart, to provide coverage to the same physical area.
From this Antenna reference guide;
http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008008883b.html
Hope this helps!
Rob

What is the purpose of TABLE MAINTENANCE GENERATOR IN ABAP DDIC

CAN ANY EXPLAIN ME
1.what is the purpose of TABLE MAINTENANCE GENERATOR IN ABAP DDIC?
2. AND THE CONTENTS IN ITS TABS.
KINDLY LET ME KNOW.IT IS URGENT
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 28, 2008 11:42 AM

Go to SE11, give the table name and click on change. Then Go to utilities--> Table maintenance generator.
In the table maintenance generator screen, we should give Authorization Group, Function Group name (Function Group name can be same as table name), Maintenance type can be one step or two step, usually we will create with one step. we should give maintenance screen number. After clicking on create button, a table maintenance generator will be created.
To check it go to SM30 . In SM30, we find display, Maintain options.
We can view the table contents by choosing Display and we can create table entries by choosing Maintain.
Why we have to go for Table maintenance generator, when we can edit the table by SE16 or SE11, utilities->create entries?
In the production system, end-users will not be having access to transaction codes like SE11 and SE16. Developers will not be having access to many transaction codes including the above two.
To view the contents of the database table, we will use SE16n in Production system. Please find out the difference between SE16 and SE16n.All these authorizations will be maintained by BASIS team, by creating access profiles.
So in order to edit or create the contents of a database table, we should go for table maintenance generator. In real time, authorizations will be maintained in production system. (even in development and Test systems to some extent).
There is an audit like Sarbanes-Oxley Act for American clients, where every thing will be audited by government agency. To know more about SOX, use the links on the right hand side of this page.
The second reason is, we can edit or create multiple entries at a time, using table maintenance generator.
Apart from that we have options like 'Enter conditions' in table maintenance screen SM30. Please try to find out the use of those, by creating an example.Table Maintenance generator: Difference between one step and two steps.
While creating table maintenance generator, we find below options:
1. When we choose one step, we have to give the screen number in Overview Screen field.
2. When we choose two step, we have to give both overview screen number and single screen number.
You can give any number for screen. Dont give 1000 screen number. As this number is reserved for selection screen.
When we choose two step, two screens will be created for table maintenance. For single step only one screen will be created.
When we choose two step, table maintenance will work as follows:
Go to SM30, give the table name for which you have created table maintenance-
Overview screen will be displayed. To create entries, when you click on new entries.
Another screen will be displayed, where you give input and save.
You can enter one record at a time.
We use single step generally, as it is user friendly.
To completely understand the difference and above points please do exercise by creating table maintenance generator in both ways (using single step and two step).
<REMOVED BY MODERATOR>
regards,
Balaji
Edited by: Alvaro Tejada Galindo on Feb 28, 2008 11:42 AM

HT204476 is there anyway to get rid of the old iPhoto Library? It defeats the purpose of having a new software if I have to keep the remnants of the older one.

is there anyway to get rid of the old iPhoto Library? It defeats the purpose of having a new software if I have to keep the remnants of the older one.

dubthedankest wrote:
Where are the masters actually stored upon conversion from Aperture to Photos? Photos?
The master files are stored on your drive, but they are not actually stored "in" any folder. Folders are really just special files that store various bits of information about the files associated with that folder, including links to where they actually are stored. That's why you can "move" a file from one folder to another very quickly: all that you really are doing is moving the link & other info from one folder to the other folder, while the file itself stays where it was.
Because of this, it is possible for more than one folder to link to the same file -- in the Finder it looks just like there are two copies of the file, one in each folder, but there really is just the one copy. From the description in the Photos saves disk space by sharing images with your iPhoto or Aperture libraries doc, it looks like that's what happens when you import your iPhoto library into Photos -- both the old iPhoto Library "file" (which actually is a set of folders & subfolders of files) & the Photos Library (also consisting of folders & files) contain links to the master files, but like the Apple doc says, there really is just one set of master files being stored.
This is very similar to the way Time Machine backups look like they have multiple copies of the same unique file, one in each time-stamped backup folder, but there really is only one copy on the Time Machine drive. My guess is Apple is using hard links for this, which means the actual master files will not be deleted from the file system as long as at least one link remains to each of them.
So you should be safe in deleting the old iPhotos Library once you are absolutely sure you don't need it, but to be sure, if it was me I would make a backup just in case, or better yet just leave it alone.

While defining a columnar table, what is the purpose of column store type

Hi folks
I have two questions related to columnar table definition.
1. What is the purpose of column store type.
While defining a columnar table, what is the purpose of column store type (STRING ,CS_FIXEDSTRING,CS_INT etc) , when I define a table using the UI I see that the column is showing STRING but when I goto EXPORT SQL it does not show. Is this mandatory or optional ?
2.VARCHAR Vs. CHAR - In the UI when I create the table I do not see the CHAR option , but I do see lot of discussion where people are using CHAR for defining the columnar table. Not sure why UI dropdown does not show it. I also read that we should avoid using VARCHAR as those columns are not compressed, is that true, I thought the column store gives compression for all the columns. Are there certain columns which cannot be compressed .
Please let me know where I can find more information about these two questions.
Poonam

Hi Poonam
the CS_-data types are the data types that are used internally in the column store. They can be supplied but it is not at all required or recommended to do so.
SAP HANA will automatically use the correct CS_-data type for every SQL data type in your table definitions.
To be very clear about this: don't use the CS_-data types directly. Just stick to the SQL data types.
Concerning VARCHAR vs CHAR: fixed character data types are not supported anymore and don't show up anymore in the documentation.
I have no idea why you believe that VARCHAR columns are not compressed but this is just a myth.
create column table charcompr (fchar char(20), vchar varchar(20));
insert into charcompr (
    select lpad ('x', to_int (rand()*20), 'y'), null from objects cross join objects);
-- same data into both columns
update charcompr set vchar = fchar;
-- perform the delta merge and force a compression optimization
merge delta of charcompr;
update charcompr with parameters ('OPTIMIZE_COMPRESSION' ='FORCE');
-- check the memory requirements
select COLUMN_NAME, MEMORY_SIZE_IN_TOTAL, UNCOMPRESSED_SIZE, COUNT, DISTINCT_COUNT, COMPRESSION_TYPE
from m_cs_columns where table_name ='CHARCOMPR'
COLUMN_NAME    MEMORY_SIZE_IN_TOTAL    UNCOMPRESSED_SIZE   COUNT   DISTINCT_COUNT COMPRESSION_TYPE
FCHAR       3661                    70285738            6692569 20              RLE
VCHAR       3661                    70285738            6692569 20              RLE
We see: compression and memory requirements are the same for both fixed and variable character sizes.
- Lars

What is the significance of having Ver 1 and Ver 2 in a Bal Sheet?

Hi,
1. What is the significance of having Version 1 and Version 2 in a Balance Sheet(Income Statement)?
Any real life significance of these versions?
2. I had a previous question which was not answered, can verify if having version 1 and version 2 in a query addresses that problem:
u201C Is there a way to compare two different income statements (or two Bal Sheets) for say, Year 2005, if Income statement 1 is from R3 but Income statement 2 is from a non-sap system. i.e. to create a variance for them as a means of reconciliation? u201C
If Version 1 and Version 2 in a balance sheet does not deal with this, can you help with it?
Thanks

Hi,
thanks for the response.
Does this versioning process also takes place in Balance Sheet or it is something done only for Income Statements?
Is this the reason why some queries have varaibles to enter Version 1 and Version 2?
If Version 1 and Version 2 are from the same datasource, and you bring all into a DSO, what will be the advantage to separate the Version 1 and Version 2 data different cubes?
To help me get your response well, is the Versioning concept used in addressing the other part of my question:
i.e. if having version 1 and version 2 in a query addresses that problem:
u201C Is there a way to compare two different income statements (or two Bal Sheets) for say, Year 2005, if Income statement 1 is from R3 but Income statement 2 is from a non-sap system. i.e. to create a variance for them as a means of reconciliation? u201C
If Version 1 and Version 2 in a balance sheet does not deal with this, how do you address this?
Thanks

What is the purpose of the 1394 and USB jacks on the 30" Cinema?

I have a 30" Cinema display connect to my (current-model) Mini via the Thunderbolt port and an Apple Dual-DVI adapter.
The back of the display has a pair of USB jacks and a pair of Firewire jacks, and the adapter has cable connections to match. What is the purpose of all these connections? I can tell you right now, it seems that nothing is coming or going through any of these paths. The Cinema display is working just fine but these miscellaneous connections aren't live as far as I can tell.
What would be great is if the FW tail on the adapter could be used as a second FW port for the Mini. Can that be made to work? Is there some way to route a FW signal to the Displayport?
TIA for any thoughts on this matter.

If I have to connect one Cinema FW port to the sole FW port on the Mac Mini, that doesn't gain me any additional ports--it consumes one of two ports and leaves me a net of one open port--the same quantity I started with.
The display's FireWire cable (not one of the ports on the back of the display) connects to the computer's FireWire port (via a FW400 to FW800 adapter). This uses up one computer FireWire port, but the display has two FireWire ports, so you gain one port.
It's the same for USB. You lose one port of the computer but get two on the display.
BTW, your response implied that the Thunderbolt port "contains" both USB and FW connectivity. Can I simply tap off the FW and feed my external FW hard drive directly from the Thunderbolt port?
Thunderbolt doesn't include USB and FireWire directly. Instead it includes a version of PCI. Apple is making some simple Thunderbolt to FireWire or Internet adapters, but they have only one Thunderbolt connection, so if you used one, there would be no place to connect your 30" display. (The HDMI port is limited to 1920 x 1200, so cannot drive a 30" display at full resolution.)
Belkin is coming out with an adapter that you could use, but it is not cheap.
<http://www.belkin.com/pressRoom/releases/uploads/ThunderboltCableDock_060512.htm l>

Help required understanding the purpose of having instance Init blocks

I want to know exactly what the purpose of having instance initialization blocks in Java. As in static init blocks, we can execute some commands before creating an instance of a class.
And also in instance init blocks, we are executing some commands which we can do in a constructor. So Im little bit confused of the purpose of having this concept instance init blocks without writing it in the constructor itself.
Really appreciate if anyone can explain this ASAP as I am still a beginner who is studying for SCJP exam.
Thanks in advance.

The instance initialization blocks are always executed before the constructor code is executed. This may be used for some activity which is common to all constructors (in case constructors are overloaded).

What is the purpose of Date From and Date To In Oracle HRMS ?

hi
I have doubt on
What is the purpose of Date From and Date To In Oracle HRMS?
Thanks

Where do you see these fields? Please give full details (eg, the navigation path).
If you're referring to Effective Start Date and Effective End Date (effective_start_date, effective_end_date) these are two fields that appear on many HRMS entities. They're used to store dated history over time. For example:
14-Jan-2009 to 19-Apr-2009 - Pam Stephens
20-Apr-2009 to date - Pam Erickson
In this example Pam got married on the 20th April 2009 and changed her surname from Stephens to Erickson. Here the history of changes are kept so that if we date-track to any time prior to the 20th April 2009 we'll see Pam Stephens and if we date-track on or after the 20th April 2009 we'll see Pam Erickson.
Check out the following Oracle Support article for more information:
How Date Track Works [ID 177733.1]

HT5622 What is the purpose of having two emails one for iCloud one for Apple ID

Similar Messages

Maybe you are looking for