HT5624 How I Know My imei no.

How i know my imei no.

Settings-->General-->About. You'll see the IMEI listed towards the bottom.

Similar Messages

My iphone was stolen and called police. Now the ditective needs to know my IMEI number. I need to know the number of the stolen one. How can I get the IMEI number?

My iphone was stolen and called police. Now the ditective needs to know my IMEI number.I need to know the number of the stolen one. How can I get the IMEI number?

Quickest place to look is in the label attached to the box the phone came in.
Not around anymore? Maybe the carrier you used the phone with can facilitate the information. Also, when under contract, the IMEI is listed in the paperwork. Apple, alas, is quite unhelpful with that information.

How apple support my iphone who ever my serial is replaced and how i know my iphone is refurbished ??

Hi everyone! I have iphone 4s, which was my friends bought it from canada appstore about 1 month before and has serial number DQ*******TDD and IMEI ****. When i try to check warranty on the page https://selfsolve.apple.com/wcResults.do i see
We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us.
And if i try to enter IMEI here i see
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.
Does it means, that I was bought a non exist iPhone? Or it was refurbished? I need an official answer to take them to seller because I was bought iPhone as a new.
How I know my iphone is refurbished?
Thank you.
answers that i folow up and find are :
- Did you purchase the device from Apple or an authorized reseller? If not, then you were scammed.
- It means you bought a gray market phone that was replaced, reported lost, or reported stolen, then re-sold illegally. It has no warranty and Apple will not service it with an out of warranty replacement.
- If your phone was replaced, it was most likely refurbished.
- You cannot tell the difference between a refurbished phone and a new one.
- check your serial number if its starts with 5K then its refurbished model
Not true. All it does is identify it as 'service stock'. It may be refurbised, or it may be new. There is no way for you, or even someone at an Apple Store, to tell the difference.
6 - You bought a phone that was stolen, lost, or taken in for repair and then re-sold illegally. get your money back if you can.
If there is ever a hardware problem that requires service, you will most likely not be able to get it serviced or replaced by Apple.
7- During the refurbishment process the devices are assigned a new serial number.
8- This means that your iPhone was replaced by Apple and you entered the serial number for your old iPhone which was replaced.
9- That means that particular phone has been replaced under warranty. Where did you get the phone from? If it was used, the previous owner may have had it replaced and not returned it to Apple as they were supposed to and sold it.
10- Interpreting what you postd, it would seem you had the device replaced at some earlier stage. Apple doesn't repair but instead replaces the whole unit with a refurbished unit which has its own serial number. Whatever the case, you will have to see Apple about the matter.
11- white box (new) or a brown box (refurb)
now my questions :
how i know my iphone is refurbished and how apple support my iphone who ever my serial is replaced ??

How can I know my device is refurbished or new one??Can I check my device is refurbished or new with serial number?

I need to know the IMEI of the phone

hi there,
to release my phone with a company in Spain need to know the IMEI of the phone you buy as this that I have was repaired.
if anyone can help me to know how to get it would be very grateful.
a greeting.
david

thank you! but i need the imei of my first iPhone. I have now a repaired phone and i need the imei of my first phone

HT3939 how to know the carrier for iphone 5 if its showing activation failed please insert a sim card

how to know the carrier of iphone 5 if its showing activation failed please insert a sim card and i don't know what sim card goes in it and if it is cdma or gsm.
i stuck on this step. i can't go further it just shows imei and meid number but iccid is displayed unknown. please help me to move further. thank u.

contact apple.

How to know whether the phone is replaced or not?

Dear All,
Please help in how to know whether Iphone 5 is replaced or not? I came to know that on replacement, imei number gets changed. please make me aware.

Nobody here can make you aware. You need to contact Apple directly.

How to know the manufactuirng country of a Nokia m...

Hi, Anyone knows how to know the manufacuring country of a Nokia mobile with IMEI number?
Please reply its very urgent.

Hi read this
http://a.com.pk/nokia-manufacturer-imei-country-of-origin-check/
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

HT4061 I bought my iPhone online but I don't have its IMEI number and I lost it today, can I know its IMEI if I have the order number of the shipment ?

I bought my iPhone online but I don't have its IMEI number and I lost it today, can I know its IMEI if I have the order number of the shipment ?

You could always READ the article from which the question was posted as it explictily details how to find the IMEI and several other identifying numbers. Including ways to find them in iTunes without the phone.

HT4061 My ipad was stolen, i would like to ask how to get the IMEI using the serial number DL*******FJ1.

my ipad 2 was stolen last january 7, 2013. i want to know how to get the IMEI. unfortunately i was not able to connect it to my pc even once. but i can tract my ipad using my find my iphone in icloud. the serial no is DL*******FJ1.

Do you have the original retail box the tablet came in? If so its where the barcode is located, ideally labeled as the IMEI.

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

How to know through back end employee position in Requisition approval

Hi all,
I have one Employee_id ,how to know this employee has a authority to approve the requisition through back end. what is the link between
per_all_people_f and PO_POSITION_CONTROLS_all.
Thanks

hi
I have one small doubut, what is the differnce in the PO_Requisiiton_headers_all Table Have PREPARER_ID and PO_action_history table Have Empolyee_id and also in po_action_history have created by .what is the main differnce between thease three PREPARER_ID,empolyee_id and created_by .
Ex :- select created_by,last_updated_by,PREPARER_ID,creation_date,last_update_date
from apps.po_requisition_headers_all where requisition_header_id=6731548
O:P- created by last_updated_by prepaper_id creation_date last_update_date
1216 83867 72208 5/26/2009 8:48:59 AM 5/26/2009 12:41:19 PM
select created_by,last_updated_by,employee_id,action_code,creation_date,last_update_date
from apps.po_action_history where object_id=6731548 order by sequence_num
CREATED_BY, LAST_UPDATED_BY, EMPLOYEE_ID, ACTION_CODE, CREATION_DATE, LAST_UPDATE_DATE
1216, 1216, 72208, IMPORT, 5/26/2009 8:48:59 AM, 5/26/2009 8:49:27 AM
1216, 1216, 72208, SUBMIT, 5/26/2009 8:55:41 AM, 5/26/2009 8:55:41 AM
1216, 1216, 72208, RESERVE, 5/26/2009 8:55:41 AM, 5/26/2009 8:55:42 AM
1216, 1216, 72208, FORWARD, 5/26/2009 8:55:42 AM, 5/26/2009 8:55:43 AM
1216, 83867, 72208, APPROVE, 5/26/2009 8:55:43 AM, 5/26/2009 12:41:13 PM
My Mian Problem is why same employee forward him self to approve the requisiiton.
but his last updated_by is different.
I am not Understanding the functionality of this .
Thanks

How to know my ipad is 4...y it shows only 13.6 gb in usage when i check in settings....my ipad is 16gb

My Ipad has retina/wifi/cellular/16gb...but how to know its ipad4...because no were i see ipad4 (ipad box/website)...i agree it has lightning to usb but not mentioned on particulars...and also no 16gb is showed in usage when i checked in settings....how do come out of this ?

If it has the Lightning port, it is an iPad 4. iPad 3rd gen and all below came with the 30-pin connector. If you want, post the model number and we will verify what it is exactly.
Identify your iPad:
http://support.apple.com/kb/HT5452

How to know my macbook pro supports usb2 or usb3?

How to know my macbook pro supports usb2 or usb3 ?
And if it is USB 2, will external hardisk which support usb 2 would be compatible with & vice-versa?
What would be the cons?

USB 3.0 ports were only added to those MacBook Pros that were released in mid 2012 and later.
So you would have USB 2.0 ports on your machine.
But USB 3.0 and 2.0 are 'compaitble,' somewhat - you just won't be able to get the throughput of a USB 3.0 to USB 3.0 connection.
Clinton

With a contract number, how to know the total PO release value against it?

Usually one contract corresponds to multiple PO records, now we know the contract number, then how to know the total PO release value against this contract. In other word, we would like to know the total release value of all the POs with the same contract number. To just input the contract number in EKPO table? but then look for which field in this table to add these PO release values up?
We will give you reward points!
Thanks!

hi Mohammad,
By following your instruction, input the contract number 4800000112 into Document number field, then hit Enter, get the following (only copy two records here for example), but kind of a mess. Could you let us know which one is the PO release value for this contract?
Contract   Type Vendor     Name                                 PGp Agmt. date
Item Material           Short text                               Mat. group
D I A Plnt SLoc                 Targ.qty. Un       Net price Curr.   per Un
4800000112 WK   2000012012 GULF INTERSTATE FIELD SERVICES       QBH 06/20/2006
Agreement start06/20/2006 Agreement end 12/31/2007
Tgt. val.        1,000,000.00 USD   Open          1,000,000.00 USD   100.00 %
00001                    Inspection Svcs, Construction            R3VNI
L   U                                  0 UL            0.00 USD       1 EA
00002                    Chief Inspector                          R3VNI
L   U                                  0 DAY         390.00 USD       1 DAY

How to know whether balance carry forward has happened or not

How to know , whether balance carry forward has happened or not for a perticular GL account or for the company code as a whole?

If the account is a balance sheet account, you can merely look at the beginning balance for the same balance sheet account for the beginning of the next fiscal year FS10N. The beginning balance will equal the previous year's ending balance. Since this does not happen automatically, you will know that carry forward has not been done if a balance sheet account has no beginning balance in the following fiscal year.
If you are talking about For P&L GL accounts, you can check the acvitity in the retained earnings accounts to make sure that they have been updated for the P&L activity. You can identify the retained earnings account by looking at the master data for the account in the section "P&L statmt acct type" and pulling up the menu to see the actual retained earnings account number.
You can perform carry foward (GVTR) as many times as you want but normally once it has been ran, any postings to a previous fiscal year are automatically carried forward to the current year after that initial run.

HT5624 How I Know My imei no.

Similar Messages

Maybe you are looking for