HT5624 How to activat my new phone

My iphone is new and did unlock but
Its show me activation required

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
-Griff W.

Similar Messages

  • How to activate a new phone to replace a broken one

    I have a family plan, with 4 phones on it.
    My daughter put hers through the washing machine, its toast!
    So, we have a brand new, never-used palm center on hand.
    But when I try to activate it, using the page at https://www.verizonwireless.com/b2c/activation/activatephone.jsp I pick the line, enter the new MEID and then it just takes me to a page with no other options, nothing happens!

    ok, so I eventually find my way to the number 800-922-0204
    I call that, walk through the menus.
    it tells me turn off the old phone, dial *228-SEND from the new one and walk through the activation
    well, the old one is toast, its definitely off, so I follow along
    - dial *228-send
    - enter the phone-line # I want the new phone on
    - enter my billing passwd, replacing letters with digits
    - it gives me a "wait a minute message"
    - then it gives me a "we cannot activate your equipment" message, no reason
    - then it tells me to dial 800-922-0204 for assistance
    so, here I am, stuck in an endless loop!

  • I am looking into Buying Retail a New Blackberry Q10. Doing this to avoid having to Give up my old Data Plan. Have read that when you activate a new Phone it forces you to pick a new Plan. Is this True? and How to I avoid this? 20 Year Verizon Client

    I am looking into Buying Retail a New Blackberry Q10. Doing this to avoid having to Give up my old Data Plan. Have read that when you activate a new Phone it forces you to pick a new Plan. Is this True? and How to I avoid this? Any other advise in this matter would be greatly appreciated.
    20 Year Plus Verizon Client

    The only "unlimited" plan I can think of where this would not apply is the old Connect plan for multimedia/basic phones.  That unlimited data, on devices such as the LG Voyager, EnvTouch, and other "multimedia" devices is  not the same.
    If you currently have an individual $29.99 unlimited data plan with a 3G Smartphone, then you can buy a BBQ10 retail and activate it with the same data plan and keep the unlimited.

  • HT201269 how do i activate my new phone?

    how do i activate my new phone ?

    If you already have an old phone/ carrier just turn it on.  Verizon works in this way.
    With wifi follow the Setup Assistant on-screen.

  • How to activate my 3GS phone ?

    how to activate my 3GS phone ?

    Put your SIM in it, turn it on, and either follow the on-screen instructions (if it's running iOS 5 or 6) or plug it in and activate it using iTunes...
    Are you having a problem?

  • Do I have to activate my new phone before I can set it up,ie apps, contacts, emails, etc.?

    Do I have to activate my new phone before I can set it up,ie apps, contacts, emails, etc.?

    Not necessarily. You can remove the SIM card from the phone and set it up via wifi only first and then go the your MyVerizon account online and activate the phone.

  • I need help trying to activate my new phone online where do i go??

    i need help trying to activate my new phone online where do i go??

    Log in to your MyVerizon (verizonwireless.com) and on the Overview page scroll down to I WANT TO... in the third column of boxes, under DEVICE, the 3rd one down is "Activate or Switch Device".  Click on that and follow the instructions.  If there is an issue, it will instruct you to call customer service or you will be connected to customer service automatically.  Let us know if this works...

  • How to update my new phone number after my U-verse phone service is disconnected?

    How to update my new phone number for forwarding  after my U-verse phone service is cancelled/ disconnected?

    I did call them. They said once the phone service is disconnected, there's nothing they can do about it. The thing is that when I called them to cancel the U-verse service yesterday, they did not offer me the opportunity to update the new phone #. This is so frustrating!

  • Will you help me activate my new phone?

    Will you help me activate my new phone under my correct phone number?

    Michelle you are not understanding.
    1) What phone do you have?
    2) What phone does your daughter have?
    3) Are they basic phones?
    4) Are they Androids?
    5) Are they Apple phones?
    Just what devices do you both have? Make and Model numbers, Names of the devices? I am not telling you to call anyone right now!
    I said go into a Verizon Wireless Corporate Store. Since you stated you cannot make phone calls.
    Borrow a phone and call if necessary. Use a pay phone if there is one available, use a friends or neighbors phone.
    We have used these types of communications devices long before cell phones came into use.
    If the phones are 4G LTE and both have sim cards in the devices you can swap them out and each phone should work.
    I cannot do it for you over the internet with the little to no information you are giving.

  • How do I activate my new phone?

    This may seem like a dumb question but how do I activate the new iphone5 I'm getting delivered on Friday? In the past I've always gotten my phones in the store and they did all the activation work for me. I currently have a Verizon Android phone so how do deactivate one and turn on the other?  Thanks for any help you can give me.

    Don't forget to backup your contacts and make sure they are correct. I do not think you can use Back Assistant on iPhone to load them from the site but you can download an app (VZ Contact Transfer) and do it that way.
    http://support.verizonwireless.com/how_to_use/backup_assistant.html#verify

  • HT5625 how to activate my i phone

    how do i activate my i phone after it been lost and erased

    well if the previous user has not signed out of his apple ID there is nothing you can do to get around the issue of activating,  im afraid. Sorry mate

  • Upgrading 3G to iPhone4 - How do I set new phone up?

    Hi,
    I am about to get my new iPhone 4. I currently have the 3G and all my apps are backed up on iTunes and I am about to back up my contacts too. When I get my new phone, what do I need to do to set it all up and have my contacts on there and all my apps that are currently both stored in my iTunes for a Back Up.
    I'm also wanting to give my 3G to my girlfriend but I am unsure how that will work and if all the apps will stay on there etc, it's all a bit confusing for me! I would like to install it all within my iTunes so I can update / add music etc etc all for her without her having to do anything on it to get it all working.
    If someone could help, I'd really appreciate it.
    Many Thanks
    Adam

    http://support.apple.com/kb/HT2109
    Here is an article that should help.

  • How to Make a New Phone Number Entry in Address Book?

    Can't for the life of me figure out how to do this via AppleScript. I want to create a new contact in Apple's Address Book, and populate the fields with some data. Here's what I have so far (keeping things simple):
    set theLastName to "Doe"
    set theFirstName to "John"
    --etc.
    set mobilePhone to "(415) 999-9999"
    set workPhone to "(415) 555-1212"
    set homePhone to "(415) 888-7777"
    tell application "Address Book"
    set thisPerson to (make new person with properties {first name: theFirstName, last name:theLastName, organization:"Test Company"})
    set the value of phone 1 of person id thisPerson to workPhone
    --error
    end tell
    The new contact record is created properly with first name, last name, and organization/company, but I can't get the phone data in via AppleScript. Does anyone know how to do this?
    Any help greatly appreceated.

    Hi William,
    You need to add the phone entries to the end of the list of phones. Something like this:
    tell thisPerson to make new phone at the end of phones with properties {value:"(415) 888-7777", label:"home"}
    You could also put the telephone numbers into an array in case you don't want to add all the types to all of your entries. Like this:
    set theLastName to "Doe"
    set theFirstName to "John"
    --etc.
    set thePhones to {{"(415) 888-7777", "home"}, {"(415) 555-1212", "work"}, {"(415) 999-9999", "mobile"}}
    tell application "Address Book"
    set thisPerson to (make new person with properties {first name:theFirstName, last name:theLastName, organization:"Test Company"})
    repeat with myPhone in thePhones
    tell thisPerson to make new phone at the end of phones with properties {value:(item 1 of myPhone), label:(item 2 of myPhone)}
    end repeat
    save addressbook -- to update Address Book
    end tell
    Best wishes
    John M

  • How to activate a 2G phone

    I have a 2G Iphone with an AT&T sim card from the previous owner. Since I have the phone and an AT&T sim card in it, can I activate it through the "restore" and "set up as a new phone" options in iTunes? Anyone know if I have to have a contract or can it be done otherwise.
    thanks in advance

    You need to get a new SIM card from an AT&T corporate store.
    After inserting the new SIM card, when connecting the iPhone to iTunes, you will be prompted with the activation process with AT&T.
    If you are an existing subscriber, you select as an existing subscribed followed by entering your AT&T cell phone number with area code.
    A new 2 year contract will be required.

  • How to activate a new release Strategy Of PR without deleting the previous one?

    Dear  All,
    1=I have a release strategy in purchase requisition which is without classification and active in system.
    2= Now i configured a New Release Strategy for Purchase requisition   which is with classification
    My question is i want to activate the New one with classification  in System without deleting the previous one.
    Should it possible? and How?
    Ritesh.

    Dear  Dev,
    My old release strategy at item level.
    But  the New one  is at header Level.
    But the previous  one  showing  the release Indicator.
    But  when i delete  the old configuration the old release indicator vanishes.
    But the thing is  in Pr with out classification we have same Pr doc.Type
    But in New Configuration We want to at header level  and with same doc   type.
    so without  deleting  the old one if i activate the New Strategy whether the system allow me
    to see the New Release Indicator?
    As  My testing when i deleted the old one the Old indicator in Line item Level vanishes.

Maybe you are looking for