HT5624 how to open disabled ipad after installing update

help me to open or wipe clean my ipad which was disabled after system update in which the computer says i entered 4 digit pin of which i did not enter
i tried itunes but it cant connect due to it being disabled.  is there a phone number i can call.

Hello there, rickh.
The following Knowledge Base article provides the assistance you are looking for:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
In the future, if you'd like to contact Apple directly a great place to start is:
Apple - Support - Product Selection
getsupport.apple.com
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • How to open an ipad after it is disabled due to wrong password

    what to do when i pad is locked due to wrong password entry by kids

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    Instructions can be found here.
    http://support.apple.com/kb/ht1212
    You may need to restore using Recovery Mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • Adobe reader won't open on iPad after recent update

    After most recent update, adobe reader won't open on my iPad. I have lots of docs that I need to get to. Please help.

    This forum is probably the best you can do. We're now on the weekend, and Adobe engineers don't work 24/7. When they return on Monday and see the reports, they'll work to fix it. The update will need to be submitted to Apple and then approved for an update.
    Note that there are other apps on the App Store which can read PDFs.

  • WHO ELSE IS HAVING WITH IDVD NOT OPENING AT ALL AFTER INSTALLING UPDATES???

    This is bad.
    APPLE FIGURE IT OUT.
    Email me at [email protected]
    I have a project due tomorrow.
    Thanks
    it "FAILS TO LAUNCH"
    I FAIL TO LIKE APPLE RIGHT NOW!

    Hi
    Very few Apple people are reading this forum. It's a User to User forum.
    I would try to delete the pref files (or rather start a new user account) to see
    if it runns OK.
    or read collected material:
    *Not knowing the origin to Your problem - General approach when in trouble is as follows:*
    • Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
    • Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
    • Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
    • Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK - DON’T work under Leopard
    • Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
    • Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
    • iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
    • Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
    iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
    iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named:
    com.apple.iDVD.plist
    While iDVD is NOT RUNNING - move this file out to desk-top.
    Now restart iDVD.
    Last resort: from Craig: Solved the problem!! Finally!!
    I deleted every iDVD application and folder from my boot drive,
    emptied the trash and then installed iDVD 08 using the customize option
    and I am up and running.
    Yours (a User) Bengt W

  • Hi, how can i reinstall iOS 5 In My iPad after install iOS 6?

    Hi, how can i reinstall iOS 5 In My iPad after install iOS 6?

    You can't. It's not supported by Apple.

  • Help ....Error message when trying to open itunes 11 after installing..cant solve it !!!

    Keep getting an error message when trying to open iTunes 11 after installing...running Windows ...have tried most fixes ...message says ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
    Also when iTunes first opesn after installing ....the message come up that says "A required iTunes component is not installed .please repair or reinstalll iTunes (-45075)"
    Have repaired , reinstalled , created and used a restore point etc etc
    How do I fix this !!! Please

    ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • I can not open different sites after installing itunes. Why?

    I can not open different sites after installing itunes. I can`t open google.com or youtube.com. Why?

    Before anyone can help, they need information to work with. Basic stuff: What version of iPhoto. What version of the Operating System. Details. What were you doing when the problem arose? Did it ever work properly? Step-by-step descriptions of how you got to this issue. If something doesn't work, are there error messages? What happens when you try to do this thing? And what steps have you tried already to solve the issue. With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that a helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

  • After installing updated firefox,my speed dial will not open when I close the current tab which it did before I upgraded

    after installing updated firefox,my speed dial will not open when I close the current tab which it did before I upgraded. How do I fix this problem? Thank You, Mike Chidester

    is it up to date
    Speed Dial :: Add-ons for Firefox
    "Works with:
    Mobile 0.7 - 1.0.*
    SeaMonkey 2.0 - 2.5a1
    Firefox 2.0 - 8.0a1"
    https://addons.mozilla.org/firefox/addon/speed-dial/#detail-relnotes

  • Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated.  How do I get rid of the list after they've been updated?  In the previous version I did not have an annoying permanent list.

    Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated.  How do I get rid of the list after they've been updated?  In the previous version I did not have an annoying permanent list.

    iOS 7 allows you to have your apps update automatically. Therefore, the list of what has been updated stays so that you can see what was updated, when and what the release notes say. It has been suggested that they list has a limit, much like Recents. Currently, there is no way for the user to delete the entries manually. Just try not to look at them.

  • Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

    Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

    Well then maybe you could take a screenshot because the appearance of such a window is news to me.
    Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
    To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
    If you can't find it on your Desktop look in your Documents or Downloads folder.
    When you post your response, click the "camera" icon above the text field:
    This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
    ⌘ Shift 4 and then pressing the space bar captures the frontmost window.
    ⌘ Shift 3 captures the entire screen.
    Drag the screenshot to the Trash after you post your reply.

  • I cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please

    i cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please..
    i updated my ipad in ios 6

    Turn off VoiceOver
    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

  • I try to open the program after installing it and I recieve and error message: Error: 213:11

    HELP! I try to open the program after installing it and I receive and error message: Error: 213:11

    This issue is covered under document: https://helpx.adobe.com/creative-suite/kb/error-store-does-not-allow.html
    This error occurs when the SLStore Folder is set to read-only. To resolve it, remove the read-only check from the SLStore folder (Windows) or give it read/write access (Mac OS). step in the link above.

  • Fire fox won't open after installing update. But it shows in my task manager as running

    Firefox won't open after installing update 3.6.6 Solution page says problem has been solved, but the solution has been removed.
    == This happened ==
    Every time Firefox opened
    == After installing update 3.6.6 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    Hello Chris.
    Hopefully this support article is what you need:
    https://support.mozilla.com/en-US/kb/Firefox+will+not+start

  • Why can't I open pdf's after install of adobe reader? Should I see it in system preferences?

    Why can't I open pdf's after install of adobe reader? Should I see it in system preferences?

    There are can be reasons PDFs cannot be opened. For example, some forms created with Lifecycle Designer cannot be opened.
    Are you sure the file is a PDF? Can you open it in Adobe Reader or Acrobat on a Mac or PC? Does it give an error message when you try to open it?

  • How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

    How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

    You have to restore the iPad in order to unlock it using these instructions.
    http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

Maybe you are looking for