HT5624 I have 2 IPhones (personal and business) and an IPAD - and my Apple ID needs to be different for the personal and busines phones - i've had to change my password so many times it's a mess can someone help me?

I have 2 Iphone (personal and business) and an IPad for business.  I've setup my apple Id's the business IPhone and IPad and a different Apple ID for personal phone - and my IPhones keep asking me for the Apple ID on both phones ...

Im gona ask some questions but do not post your Apple ID's.
Do you use the same account for iCloud on all devices?
Do you have the same account signed in at settings>itunes & app store on all devices or are they seperate?
Do you have the same apple id signed in with imessage or facetime on all devices or seperate?
Yes or no will be fine with seperate or same added just to get a fair idea of what we are dealing with and do us fellow userd will do our best to help you out.

Similar Messages

  • I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this

    I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder

    Djembe wrote:
    UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
    Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
    5. No special drivers are needed.
    Thanks. What about the thunderbolt port?
    7. I think Lenovo estimates 6 hours.
    Lenovo says 6 hours with the 6-cell battery on its website.
    BrendaEM wrote:
    Hi,
    There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
    I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
    W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
    T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

  • My itunes wont work and wont let my uninstall and then reinstall the newer version as its asking me too! i keep getting an error message!...please can someone help?

    please can someone help me to unistall itunes from my laptop control panel, this means it also wont let me install the latest version!

    I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
    I am running Yosemitie on a  iMac.
    Paul

  • After the OS 6 update my speaker does not work. My music plays but no sound comes out. Can someone help me with this issue? I currently have the 4S.

    After the OS 6 update my speaker does not work. Volume control on the side does not adjust the volume either. My music plays but no sound comes out. Can someone help me with this issue? I've tried rebooting my phone but still no sound comes out. I currently have the 4S.

    try to activate and desactivate the airplne switch a couple of time

  • I can't import HD video from Samsung OIS Duo into FCP. However, I can see the video with QT. In FCP, I just see a red bad with a yellow triangle (warning). Can someone help me. The video are Full HD 1080/60i?

    I can't import my HD videos (MP4) from my Samsung OIS Duo into FCP.
    However, I can see the video with QuickTime.
    In FCP, I just see a red box with a yellow triangle at the center(warning). Can someone help me. The video are Full HD 1080/60i.
    I also try converting from MP4 to DV. Cannot import the .DV either.
    Can someone help me?

    Could it be the case that you have "proxy media" selected in the preferences (under Final Cut Pro -> Preferences, click on "Playback" and see which is selected, proxy or optimized), BUT you are not creating proxy media when importing?
    If that is the case, either
      - switch to "original/optimized media",
    or
      - create the proxy media (control-click the clip(s) in the event browser, choose "Transcode media" e check the box for "create proxy media").

  • HT4796 Are there other things that need to be done for the Mac and the PC to link up.  Mine are on the same network.  I have enabled sharing.  The PC does see the Mac in its network but they just won't link up.

    I am trying to migrate my iTunes information from my PC to my Mac.  I have installed the migration software required on the PC.  The problem is that the Mac and the PC never link up even though from the PC I can see and access the Mac in it's network neighborhood.

    I am trying to migrate my iTunes information from my PC to my Mac.  I have installed the migration software required on the PC.  The problem is that the Mac and the PC never link up even though from the PC I can see and access the Mac in it's network neighborhood.

  • Don't know the password to my old icloud account...can someone help me please?

    Okay, I have an Iphone 5s that I'm having problems with. I had a 4s and set up an apple account and Icloud account on that phone but ended up giving it to my mother and got me a new one. Well somehow my new one will not let me restore it back to its original settings. Keeps telling me I need my password to my old account and I have no idea what it could be and it will not send me a email or anything to reset it. I had the find my iphone app on it before and its saying to turn that off I have to have the old password. Guessing that somehow the new phone was synced with the itunes from my old one by the computer and now I can't get past all of it. Can anyone please help???

    I have been researching this for hours and can't seem to find a fix. Beyond frustrated and upset now and know I won't be able to sleep tonight

  • Do you need an additional slot for the RBS and does the RBS count as an additional hard drive in the Sharepoint 2013 Server farm?

    Hello Community
        If you have a clustered Sharepoint 2013 Server farm running RAID 10, on a
    clustered WS2012 R2 server that has 10 hard drive slots:
            (4) drives being part of the Sharepoint 2013 Server farm
            (1) drive for the Web App Server
            (5) are for hot swap if any of the production hard drives fail
        The question(s) is:
            - If the server only has 10 slots for hard drives are you still allowed to add a
    NAS/RBS drive and does the NAS/RBS drive get clustered also, or does this scenario require
    reducing the RAID level down to RAID 5 to allow for NAS/RBS hard drive?
            - Does the NAS/RBS hard drive need a hard drive for hot swap?
            - Does the NAS/RBS drive have to have Sharepoint 2013 Server or WS2012 R2 running on it?
            - Does the Web App Server have Sharepoint 2013 running or just WS2012 R2 running on it?
        Thank you
        Shabeaut

    RAID 10 requires a minimum of 4 hard drives. The LUN for RBS must be attached to the SQL Server, not SharePoint server, as a local drive. You just need to be running the minimum required OS for the version of SQL Server you're using.
    Do you mean Office Web Apps by "Web App Server"? If so, that cannot have SharePoint installed on it. Otherwise, if you're just referring to it as another SharePoint server, yes it would have SharePoint installed on it.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • I took the advice of one of the people in the forum and changed a number in the registry from a 10 to a 20 to give more time for apps to load and now it is too slow. I need to change it back but I do not know how, please can someone help me?

    this advice came from someone in a solved part of the forum, who had a long list of computer solutions.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • I can't get into iTunes or apps on my iPad or iPhone. It never excepts my password and tells me to reset my password. Well I have changed my password about 15 times and still I have trouble entering iTunes or apps.

    I am having problems getting into iTunes and Apps. The message says for security you must request a new password. I have changed my password so many times I have given up on iTunes and Apps

    Don't fight it
    Walk it into the nearest Apple Store and ask for help there....it's their job

  • When I try to send email from my iPad and iphone it says that I have the incorrect username and/or password, but I know they are correct, can someone help me?

    When I try to send email from my iPad and iPhone it says that I have the wrong username and/or password, but I know they are correct.  Can someone help me?

    "Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
    In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
    Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
    In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
    That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done.

  • HT1438 i keep getting SIM locked message on my iphone 4s and I need to unlock it please please can someone help me? The voice activation is on and when I type in what I think is the code It wont even put in the numbers

    I am trying to unlock my SIM from my iphone 4s, as I am getting a mesage SIM locked. How do I unlock this?Also I am typing in what I think my code is and it is not working. The voice activation wil not allow me to type in the numbers for some reason. I have turned it off and on about 7 times now. please please please can someone help me?

    If you bought the iphone in the US and it is locked to a specific carrier, then you can't use a different sim (from another carrier).  Is this your situation?
    Otherwise I'm not sure what you mean by "trying to unlock my SIM".  In which country did you buy the iphone?  Who's your carrier?

  • I am trying to use an external HD and need to configure it for the MAC. Can someone explain how to configure the HD (Western Digital - My Passport SE)?

    Can someone help explain how to add an external HD to the Mac? I have a Western Digital My Passport SE and need to configure if for the MAC and add it to the HD location on my Mac.

    Connect the external drive to the Mac. You can do that while the Mac is on, (If the drive is one that has to be plugged into a wall outlet do that too and turn the power on.) If there is a light on the drive it should turn on.
    Now double click on the hard drive icon - top left of the screen of your computer. When it opens look for the Applications folder. Double click that. Next look for a folder called Utilities. Double click. In there you will see a file called Disk Utility.app. Double click on that.
    You will now see something like this, with two items on the left. The second one is your new drive.
    Select it - one click. And click on Erase - one of the buttons at the top, You will see this.
    You must select the Format, it's a drop down - the one shown in the image above is best. You can change the name from Untitled if you want. The name can be changed later if you prefer.
    At this point look at the bottom right. There is a button there called Erase. Click on it. Then go get yourself a cup of coffee - this will take a few minutes.

  • I  can not open my iphone 4 after upgrading to 6.1.3  :( can someone help me please

    My iphone went dead after upgrading to 6.1.3 it is completeley useless i tried hard reset but it didnt work , i tried via itunes to restore or dfu mode but still it isnt workin . can someone help me pleasse

    What messages or error codes do you get ?

  • HT201441 My cousin's iphone  gave it to me but the bad thing is, it has a icloud and i can't access the phone. my cousin got amnesia so he didn't remember anything to this phone. I entered the password so many times so that i can't activate the icloud acc

    My cousin's iphone  gave it to me but the bad thing is, it has a icloud and i can't access the phone. my cousin is involved to a motorcycle accident and he got a amnesia so he didn't remember anything to this phone. I entered the password so many times so that i can't activate the icloud account. Please, I need to access this phone immediately for emergency purposes. You are my only hope. The phone model is a1429 Verizon (Factory Unlocked). P.S apology for my bad English.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    jennfromla wrote:
    ... I have never plugged it into a computer...
    Note:
    All Data will be lost

Maybe you are looking for

  • From scorecard Pass parameter to be used as Measure in query of analytic Grid report in PPS in SP2013

    From scorecard Pass parameter  to be used as Measure in query of analytic grid report in PPS Any idea of how we can pass this parameter while connecting scorecard and report any use of MDX in connection formula ? Parameter needs to be assigned on cli

  • LR 3.5 'crashing' when using spot correction tool

    I recently upgraded to Windows 7 (from XPx64) and have had to restart LR several times after using the spot correction tool. The circle verifying the correction doesn't appear, and my mouse cursor disappears anytime it is over the LR program window.

  • Is Web Dynpro for ABAP accesible?

    Hello All, Our application in EP was developed using Web Dynpro for ABAP and POWL. I wanted to know if Web Dynpro for ABAP is accessible ? Awaiting your inputs, Thanks & Regards, Smitha

  • Being spammed by non-contacts even when resticted in settings..

    I am getting spam messages from people outside my contact list.  This despite having selected the option in the setting for this no to be allowed. What can I do..? Here is one: Hello Dear friend, God day with duo respect and humility, am presenting t

  • Creating autostart DVD in kiosk mode?

    I need to create a DVD or video file that will run in kiosk mode for an exhibit we have up. Since I've never done this before I have a few questions. 1. The video has already been created by our local cable TV folks and they said they can save it in