HT5633 can my ipad model Mc820LL work with a bluetooth keyboard model number IH-B-IP2103

can my ipad model Mc820LL with a bluetooth keyboard model number IH-B-IP2103

iPads work with bluetooth keyboards.  What does this have to do with the Apple TV?

Similar Messages

  • Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?

    Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?

    Julien-
    I have the Apple MC184LL/A Bluetooth Wireless Keyboard.  The brigtness control works with mine, as do most of the other functions.
    Try cycling the keyboard off and on.  Hold the power button until the green LED goes out.  Then press it one more time to turn it back on.
    You might try resetting the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  Then you may need to reconnect your WiFi and Bluetooth.
    If that doesn't help, try resetting/rebooting the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart in a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    Fred

  • New iPhone &iPad 2 working with Extreme Base Station Model A1034

    iPad 2 worked with Extreme Base Station Model A1034. Now new iPhone and now neither can connect to the Base Station. What could be the reason for the iPad 2 to stop working with the Base Station and why can't the iPhone use the Base Station? Thank you!

    At this point are you saying that none of your wireless clients can connect to the AirPort? If so, then I would recommend that you do the following:
    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref:Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • How Can I choose Iphone 5s models that work with LTE in Brazil. The Iphone needs to Support Band 7. If I buy the wrong model can apple change it ?

    I am planning to buy an Iphone 5s in October, but I have to make sure that the model will work with the LTE services we have in Brazil. I know that Apple made 2 Models that support Band 7. See Below.
    Model A1457*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 2, 3, 5, 7, 8, 20)
    Model A1530*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); FDD-LTE (Bands 1, 2, 3, 5, 7, 8, 20); TD-LTE (Bands 38, 39, 40)
    How can I make sure I will buy the correct model through the internet ? Can Apple change the Iphone In case they send the model that does not support LTE services in Brazil ?
    Thanks,

    JP Ellery wrote:
    The models that will work with brazilian LTE networks are:
    A1507 and A1529 (iPhone 5c)
    A1457 and A1530 (iPhone 5s)
    JP
    Have you personally tried those models with Brazilian LTE networks? Do they work? If so, fine.  If not, then besides that, there is the problem of the warranty which is not international. The user will have to return the phone back to the country of purchase for both warranty and out of warranty service. So what might seem cheaper at first glance might not be in the end.
    Anyways, it your money and the OP's should he want to go ahead with your recommendation.

  • HT4623 I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

    I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

    Also i forgot to add after a night of searching how to turn the Epson Workforce 435 printer into Airprint friendly and not iPrint (which are 2 completely different things) i donwloaded a program called (AirPrint Activator) from HandyPrint. The link is below to download the software. Once i installed the application i set my printer to be shared over my Home Network (Wi-Fi Network). Once you have done that, open the AirPrint Activator application you have just downloaded, swtich it ON from OFF mode, and then you should easily see your printer name in my case EPSON Workforce 435 and then just close the application. Then go to your IOS Device like your iphone/ipad/ipod touch select a picture that you want to test print or even an attached PDF from your email, and select Print in the share button. You will then be prompted to select your printer. Your printer you automatically be recongised then just select print. And now you have a complete AirPrint ready printer with a Printer that doesnt even support the function. Im sure you can do this to all Wireless Printers, even if they came out before Apple AirPrint service launch.
    And also if you still need guidance and a video to follow from just click the Youtube link below
    http://www.youtube.com/watch?v=9r75m_VUr0E
    Download AirPrint Activator Link
    http://netputing.com/handyprint/
    I hope that this helps your question and enjoy your day
    Kind Regards
    Ahmed

  • My printer is a fairly new all-in-one Brother MFC-7860 DW. It is not listed in the iPad AirPrint printers. Can I get it to work with my new iPad2?

    My printer is a fairly new all-in-one Brother MFC-7860 DW. It is not listed in the iPad AirPrint printers. Can I get it to work with my new iPad2?

    If it's not an Airprint enabled printer, you can not natively through your iPad.  BUT, there are apps you can purchase in the App Store, like Print Central ($9), which is what I use myself and works well for my needs.

  • Can the iPad work with a wireless keyboard and mouse?

    Would like to know if the new iPad will work with a wireless keyboard and mouse!

    There are quite a few threads requesting this facility, so I thought I would choose this recently active (at the time of writing) post to reply to, in the hope some thinking appleite with influence stumbles upon it.
    I totally get Apples philosophy of not polluting their interface design concepts with the introduction of a clunky so-last-year cursor; I actually agree.  What I can't understand so much is that there are a number of apps that could benefit from mouse support. The one I need is RDP.  This class of apps allow us to connect to servers running other operating systems using the IPad; why not authorise CERTAIN APPS to access the Bluetooth mouse stack, and let us have joy.  It doesn't affect the iPad experience in the slightest, at least not to it's detriment.
    The new retina screen is such that I actually prefer the experience of using my iPad to connect to the server than my laptop!, but given I develop software, there is no way my stubby finger can compete the clinical accuracy of a mouse when using intricate interfaces such as MSDE.  With just that one addition, I would practically move into the post pc era you tout so much, at least in my interfacing With the post pc pc,s :).
    Thanks
    Paul

  • I have an HP photosmart8250 printer and wondering when I buy a new ipad will it work with that?

    I have an HP photosmart8250 printer and wondering when I buy a new ipad will it work with that?

    There's a list of printers that support AirPrint, the native mechanism for printing from iOS, here:
    http://support.apple.com/kb/HT4356
    I don't see the 8250 listed. HP has an app that enables printing to some of their other wireless printers; search the iTunes Store and you should find it as well as some other printing apps. Otherwise you can connect the printer to your computer and route the printing through the computer. f you have a Mac, Printopia might be worth a look:
    http://www.ecamm.com/mac/printopia/
    If you have a Windows system, search the web for something like "airprint Windows hack" and you'll find instructions on enabling printing.
    Another option is an AirPrint-capable print server. Lantronix makes a couple of models, including one that supports a USB printer:
    http://www.lantronix.com/it-management/xprintserver/xprintserver-t2.html
    Regards.

  • Does ipad 4 A1460 work with CDMA ?

    Hi
    I have unlocked ipad 4 from saudi arabia model
    A1460 on the iPad (4th generation) Wi-Fi + Cellular (MM)
    Now I'm In yemen i have few question
    does ipad 4 A1460 work with CDMA network in yemen (YEMENMOBILE) ?
    if it work can i switch b/w CDMA and GSM when i move b/w Yemen and Saudi ?
    can i buy cdma data plan +sim card and install it in ipad ? or there is other way ?

    The A1460 model is infact CDMA capable.
    Maldukhn wrote:
    does ipad 4 A1460 work with CDMA network in yemen (YEMENMOBILE) ?
    Probably not.  CDMA unlike GSM is not unlockable. The Settings for CDMA networks must be provisioned into the CDMA chip at the time of manufacturing, and its very difficult to modify this after the fact.  Also CDMA devices must be registered with the carrier they will be assigned to.  They must exist in the carrier's database beforehand.
    Maldukhn wrote:
    if it work can i switch b/w CDMA and GSM when i move b/w Yemen and Saudi ?
    If the Yemen provider issues you a Sim card, you can insert that into the GSM sim card slot on the iPad and connect to their network that way, again if they support it.   This would not be CDMA but GSM.
    Maldukhn wrote:
    can i buy cdma data plan +sim card and install it in ipad ? or there is other way ?
    No such thng as a CDMA sim card. sim cards are only for GSM.   Again if the Yemen carrier offers sim cards to connect to their network you can insert it into the sim card slot and use their service that way if they support it as such.
    I suggest you contact the Yemen carrier and ask about their device policies. BYOD (Bring Your Own Device) is not normally  an accepted policy with CDMA carriers.

  • StarTech Adapter not working with Dell Inspiron 15, model 3521

    Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
    Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521 
    I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
    I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
    It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
    I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model. 
    If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for! 
    Any thoughts?

    Hi,
    Thanks for your reply.
    This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

  • My Mac is producing gray screen at startup and crashes. I'm afraid that everything explode and disappear, and can no longer connect and work with my Mac. Can anyone help ?? Thank you.

    My Mac is producing gray screen at startup and crashes. I'm afraid that everything explode and disappear, and can no longer connect and work with my Mac. Can anyone help ??
    Thank you.
    Problem description:
    gray screen at startup and crashes
    EtreCheck version: 2.1.1 (104)
    Report generated 6 de dezembro de 2014 13:29:43 BRST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      4 GB RAM
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      AMD Radeon HD 6750M - VRAM: 1024 MB
      Color LCD 1440 x 900
      Intel HD Graphics 3000 - VRAM: 384 MB
    System Software: ℹ️
      Mac OS X 10.6.8 (10K549) - Uptime: 0:31:56
    Disk Information: ℹ️
      TOSHIBA MK7559GSXF disk0 : (698,64 GB)
      S.M.A.R.T. Status: Verified
      - (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 749.81 GB (378.70 GB free)
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple, Inc. MacBook Pro
    Problem System Launch Daemons: ℹ️
      [not loaded] org.samba.winbindd.plist [Support]
    Launch Agents: ℹ️
      [running] com.babylon.activation.plist [Support]
      [loaded] com.divx.dms.agent.plist [Support]
      [loaded] com.divx.update.agent.plist [Support]
      [loaded] com.hp.help.tocgenerator.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [loaded] com.facebook.videochat.[redacted].plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [running] com.skype.c2c_service.plist [Support]
    User Login Items: ℹ️
      iTunesHelper UNKNOWNHidden (missing value)
      FaceboxPro Aplicativo (/Applications/FaceboxPro.app)
      Safari Aplicativo (/Applications/Safari.app)
      Octoshape Aplicativo (/Users/[redacted]/Library/Octoshape/Octoshape.app)
      uTorrent UNKNOWN (missing value)
      Dropbox Aplicativo (/Applications/Dropbox.app)
      Inkscape UNKNOWN (missing value)
      RealPlayer Downloader Agent Aplicativo (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
      HP Product Research Aplicativo (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    Internet Plug-ins: ℹ️
      OVSHelper: Version: 1.1 [Support]
      Google Earth Web Plug-in: Version: 7.1 [Support]
      Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
      RealPlayer Plugin: Version: Unknown [Support]
      AdobePDFViewerNPAPI: Version: 10.1.12 [Support]
      FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
      DivX Web Player: Version: 3.1.1.9 - SDK 10.6 [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.6.6
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
      SharePointBrowserPlugin: Version: 14.1.2 [Support]
      AdobePDFViewer: Version: 10.1.12 [Support]
      JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
    User internet Plug-ins: ℹ️
      npsf_uni: Version: sf 3.3.2.1 [Support]
      OctoshapeWeb: Version: 1.0 - SDK 10.8 [Support]
    Safari Extensions: ℹ️
      Searchme Adware! [Remove]
      Skype Click to Call
      iSkyDeluxe
      TED HTML5 video playe
    Audio Plug-ins: ℹ️
      iSightAudio: Version: 7.6.6
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Skype Click to Call  [Support]
      Tuxera NTFS  [Support]
    Time Machine: ℹ️
      Time Machine information requires OS X 10.7 "Lion" or later.
    Top Processes by CPU: ℹ️
          5% WindowServer
          4% DivXMediaServer
          1% fontd
          0% RealPlayer Downloader Agent
          0% WebProcess
    Top Processes by Memory: ℹ️
      296 MB WebProcess
      202 MB FaceboxPro
      185 MB Microsoft PowerPoint
      163 MB Safari
      137 MB Microsoft Word
    Virtual Memory Information: ℹ️
      843 MB Free RAM
      1.76 GB Active RAM
      706 MB Inactive RAM
      978 MB Wired RAM
      577 MB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Dec 6, 2014, 12:58:24 PM Self test - passed
      Dec 6, 2014, 12:23:11 PM Kernel_2014-12-06-122311_MacBook-Pro-de-...panic [Details]
      Dec 6, 2014, 07:08:28 AM PluginProcess_2014-12-06-070828_MacBook-...crash
      Dec 5, 2014, 05:24:39 PM WebProcess_2014-12-05-172439_MacBook-Pro...crash
      Dec 5, 2014, 10:45:59 AM Kernel_2014-12-05-104559_MacBook-Pro-de-...panic [Details]
      Dec 5, 2014, 10:18:14 AM Kernel_2014-12-05-101814_MacBook-Pro-de-...panic [Details]
      Dec 3, 2014, 08:28:35 PM locationd_2014-12-03-202835_localhost.crash
      Dec 5, 2014, 10:25:44 AM Kernel_2014-12-05-102544_MacBook-Pro-de-...panic [Details]

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime

    Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime.
    In fact I have given my iPhone to my daughter to use in Canada (purchased from UAE ISP) she is unable to use Face Time within Canada. ?
    Is it possibile to activate FaceTime in Canada if iPhone is purchase from UAE.
    Purchase under Points by ISP (No contract)
    Thanks
    Abbas

    Hello sir
           I agree what u replied for the above question, but because of the UAE request, you cannot deactivate the facetime completely from this iphone, they should stop working through SIM network. The iphone is a universal mobile which can travel all over the world, many tourist people will suffer due to that, pls re-consider in taking back and try to make it upgrading this software.
    Thanks
    SATHISH KUMAR

  • I cannot get my iPad 2 to work with VPN provider.

    I cannot get my iPad 2 to work with my VPN service provider.  Using OS 4.3.3.  iPad purchased in the USA.  Have heard there are issues with iPad 2 and VPN support.  Any suggestions?

    You can try this ... hold down on the sleep button and the power button at the same time for about 10 seconds until you see the Apple logo on the screen, release the buttons and see if the iPad restarts and you can use it.

  • Bought print central app have an impact Lexmark s300 series wireless printer can't get it to work with my I pad , help

    I bought the print central app have a Lexmark s300 wireless printer can't get it to work with my I pad any suggestions

    To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
    Hope this helps.

  • Does ipad 2 dock work with the new ipad

    anyone know if the IPad 2 dock works with the new IPad?

    Apple's cable with a 30-pin connector on one end & USB connector on the other end works on all iPad models, iPhones & iPods.
     Cheers, Tom

Maybe you are looking for

  • Error message when creating new Pantones

    Hi, When I create a new pantone  then double click on it in the swatches panel I get the following error message: "Cannot  create swatch library. There are no swatches in the file "HARD  DRIVE:Applications:Adobe InDesign CS6: Presets: Swatch  Librari

  • Unexpected error: None of the checked updates could be installed

    When attempting to update firmware, I get: unexpected error: None of the checked updates could be installed So, I go to the downloads section of the apple website and manually download and install it. However, when I run for updates, the same files s

  • Oracle provided MMV "Oracle Secure Backup" in 10gR2

    I have been reading in oracle paper 1261 titled "Oracle's Vision For High Availability Revealed" that Oracle version 10gR2 contains an Oracle provided MMV fully integrated with RMAN. However I have installed 10gR2 Enterprise and can not find any docu

  • Android Native Extension cannot find implementation for .so functions

    I can load some .so libraries but can never call any of their functions. All these .so files are known good and work when I publish/install an Android app via eclipse. But any time I try to call functions from an Air native extention I either get "ca

  • Rebuild standby question

    Good morning, I am puzzled by this in rebuilding standby process. I remember see this: Before run "rman dup for standby -" you do "ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_2=defer.." in primary db. After finish RMAN dup and start MRP process you do "A