HT5633 my german keyboard is not recognized as german-layout

my german keyboard is not recognized as german-layout

I have the same issue but with French keyboard??? Apple TV see it as UK keyboard.
Apple did reply to how it can be set. Any tips will be welcomed
Thanks

Similar Messages

  • Aluminum Keyboard Sometimes Not Recognized By USB Port

    I have an Aluminum wired keyboard that occasionally isn't detected by my Macbook in both Windows XP (Boot Camp) and Leopard. This is an exchanged one because the first one also behaved this way. I'm not using the extension cable. I have a USB wireless mouse plugged into one of the keyboard's USB ports and a flash drive. When the keyboard isn't detected, the mouse doesn't work (no lights on the receiver, can't connect), but the flash drive gets recognized. I've also had the keyboard not be detected without the flash drive so I know that it isn't the issue.
    When it isn't detected I have to disconnect and reconnect the keyboard multiple times until it randomly starts working. Once it works, it doesn't stop working, though after going to sleep it occasionally disconnects itself on startup. All the function keys work properly and there's no updates available...is there anything I can do about this?

    I've seen the very same problem. In my case I have a wired Mighty Mouse attached to one of the USB ports on the aluminum keyboard. Every time I plug it in -- not recognized first time. Second time -- success. Highly annoying.
    Unfortunately I don't have a solution for the problem.

  • Press any key... help! the usb keyboard is not recognized and I cannot reboot

    Hi,
    I really hope that one of you can help me. I had used boot camp once on my MacBook Pro so, I did not think to plug a USB keyboard on my son's iMac before starting the installation process. As a result, when I am asked to press any key, I am stuck. Obsviously I could not reboot so I unplugged the iMac hoping that it would come back to OS and give me a chance to have the USB keyboard installed and recognized before going back to the installation. Unfortunately, rebooted and went directly to where I was at.
    Thank you for your help

    I would restore the iPod to factory defaults/new iPod on your computer and start over. It appears the iPod is associated with another account.  Any media that came with the iPod does not belong to you and di not transfer with the iPod hardware.

  • Keyboard & trackpad not recognized after sleep

    I have a brand new 2012 iMac with a frustrating problem, neither the keyboard or the trackpad is recognized after the machine has gone to sleep.
    Once I unplug the keyboard and replug it in, it is fine.
    Once I turn the trackpad on and off it is fine.
    I can wake up the computer using the power button on the computer (but I still have to 'reconnect' the keyboard and mouse).
    I've tried other keyboards. I've reset the SMC controller. I've reset PRAM.
    Ideas.
    Brand new system too...  nothing funky installed.

    Thanks for the note. I neglected to mention that I had already tried that download. I received the "This update is not intended for this computer and will not be installed" message. Didn't see where I could do anything with it further.
    I also had the issue of my wireless/bluetooth trackpad not being recognized by the mac side when I re-booted. I've re-installed it but obviously don't want to deal with that every time I re-boot.

  • TS3048 Original wireless keyboard is not recognized from mini/lion

    Magic mouse is working with newly installed Lion, but while the original wireless keyboard is recognized the Mini fails to connect to it.  The keyboard was originally installed with Leopard.

    Both replies were helpful. I've not joined this support group before and didn't navigate very well. I marked that both comments were helpful. I thought I could provide more than 1 feedback for each (wrong) and should have indicated that icrouton corrected the problem. I SHOULD have recalled from set up (although a friend set up the computer this time - usually, I have done so historically) that there is an on/off on the keyboard. Icrouton's comment mentioned it, so I looked again -I found it and clicked it. Now, things seem fine. It is discretely located and I don't see how I could have accidentally turned it off, but, at any rate, thanks to both of you for very helpful information and VERY promptly submitted, too.

  • After upgrade my keyboard is not recognized by Bluetooth

    I just saw an upgrade notice come up on my computer so I hit install etc. Now my iMac 15" is updated to OS X 10.9.3 but the keyboard is no longer recognized by Bluetooth. The green light on keyboard keeps blinking green but it never connects. Any suggestions to help me? Glad I have another Mac to type on in the meantime.

    If that doesn't work try pushing the Bluetooth sing in the top bar of your computer screen
    There should be a list of all Bluetooth devices
    Click on the name of your keyboard and then on connect

  • PS2 Keyboard connector not recognized FM2-A85XA-G65

    I'm trying to use a wired PS2 keyboard while I'm having issues with this board instead of my wireless USB keyboard, but the PS2 port does not seem to recognize the keyboard at all.  This is a good keyboard; I have verified that w/a different computer.
    Anybody help, please?

    PS2 being ancient technology this might be a compatibility issue. It should just work with plugging in, not much more you can do. If possible check other PS2 device to make sure the PS2 port is at least functional.

  • Cannot login as BT keyboard is not recognized

    Help, I am stuck! I have booted my iMac into the bootcamp partition and now I need to log into Windows Vista.  The problem is that it did not connect to my Apple Bluetooth keyboard (though it connected to my Mighty mouse) and now I cannot type my Windows password.  The only thing I can do is Restart the computer using the mouse.  Also, I cannot select my boot partition and go back to OS X as pressing the Alt option during the boot doesn't work either...  The only thing I can think of doing is buying a standard USB keyboard to try and solve this problem.  Are there any other options?
    Thanks!

    Not really - that would be the easiest option; I also have an older keybord nearby (also because Bluetooth is not as 100% troublefree as a wired connection). So, yes buy a third party keyboard or borrow one from a neighbor...

  • Keyboard not recognized by computer.  Instructed to go to settings but can't since I can't key in my password

    My wireless keyboard is not recognized by my computer.  I changed the batteries to make sure that wasn't the problem.  According to online help (via my iPad), I need to update settings so that keyboard is recognized (via wifi).  The problem is that I can't get to the setting since I can't key in (via the keyboard) my password!  It worked before....not sure why it is no longer recognized.

    Hi Keyboard less,
    Welcome to the Apple Support Communities! I understand that you are having trouble setting up your bluetooth wireless keyboard with your iMac. There is a great article that shows how to set up the keyboard via bluetooth on your iMac.
    Bluetooth: How to set up your Apple Wireless Keyboard
    http://support.apple.com/kb/HT1809
    Press and release the On/Off switch to turn on your wireless keyboard.
    The green LED should begin blinking if the keyboard is not already paired and connected to another computer. The blinking LED indicates that the keyboard is in the discoverable mode. If you don't pair your keyboard with your Mac within three minutes, the indicator light and keyboard will turn off to preserve battery life. If this happens, press the On/Off switch to turn your keyboard on again. Note: If the LED doesn't turn on, make sure you have good batteries in the keyboard and that they are properly installed.
    On the computer you wish to pair the keyboard with, choose System Preferences from the Apple () menu, then choose Keyboard from the View menu.
    Click “Set Up Bluetooth Keyboard ...” in the lower-right corner to open Bluetooth Setup Assistant.
    Select your wireless keyboard, then follow the onscreen instructions to pair it with your Mac. You will be asked asked to enter an 8 digit passkey.  Important: You MUST press Return after you enter the 8 digit code.
    Note: You need to enter the 8-digit code and press Return within a certain timeframe or the process will time out. If this happens, repeat the pairing process from step 1.
    I hope this helps,   
    -Joe

  • Wireless mouse and keyboard not recognized

    I know that I have had this issue before, but can't remember what the solution is (old age?) My iMac G5 PPC has a wireless mouse and keyboard (the old apple white one). The iMac came with these as an option but WITHOUT the bluetooth card inside. (I still don't know how this works, but it does). Anyway, the mouse and keyboard were not recognized when I tried to get on today. The batteries are good. If I go to system prefs (using an even older wired mouse) there is no bluetooth option (since no card is present). I don't know how to get the computer to try to recognize both. Any help is definitely appreciated.

    HI David,
    If the iMac didn't come with Bluetooth software/hardware, then are you using a USB Bluetooth dongle?
    And open System Profile (Applications/Utilities)
    Select Bluetooth on the left under Hardware. You may need to click the gray disclosure triangle so it faces down. What does it say on the right?
    If the Bluetooth icon is in your Status Menu Bar (top right in your screen). Click the icon and make sure Bluetooth is turned on. Then click: Open Bluetooth Preferences and try re-pairing the mouse and keyboard.
    Carolyn

  • Oxygen 8 keyboard not recognized

    Hi!
    I have borrowed an Oxygen 8 keyboard from a friend to use in Garageband 3 on my iBook.
    Under system profiler it seems to be recognised - it says that there is a vend_device attached. However, the keyboard is not recognized in System Preferences and when I open GB preferencesI only have the Built-In Audio option.
    Any ideas?
    Thanks!

    when I open GB preferencesI only have the Built-In Audio option.
    Which is as it should be, a MIDI keyboard is not an audio device.
    What you should see is a dialogBox that says "1 MIDI Device Detected" when you open GB.
    The first thing I would check is your Audio MIDI Setup utility
    Next thing I would wonder is if you need to have a driver for this keyboard. You should search the web site of the manufacturer to see if there is one.

  • Wireless keyboard not recognized

    Every time I restart since installing Yosemite, the wireless keyboard is not recognized.  It takes several minutes for the keyboard to be found and then I must enter a code before it is recognized.  The batteries are new.  How do I get the keyboard to automatically load?

    Try resetting the PRAM.
    Barry

  • Swiss german keyboard

    hello, does anyone know if it is possile to get a macbook in the united states with a swiss german keyboard and not the standard USA keyboard...i saw that a western spanish keyboard is available, but i need a swiss german...
    thanks

    Hi Woody10,
    I see you are interested in a Swiss German keyboard for your HP Pavilion TouchSmart 15-No67ca laptop. On page.17 of your Maintenance and Service guide you will find all available part numbers for your product, listed below are the keyboard part numbers:
    1. Textured island style black finish for use in Switzerland 719853-BG
    2. Textured island style black finish for use in Germany 719853-04
    Please select which one best suits your needs, you can order the keyboard from: HP Parts Surfer, make sure to select your country in the top right hand corner.
    Also be sure to check out the Removal and replacement procedures for your keyboard also found on page.56 of your Maintenance and Service Guide.
    I hope you find this helpful, if you need more assistance, please let me know.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • My Kawai Cl20 is not recognized ?

    Hey Everybody,
    I looked for the answers here, but I did not find anything!
    If anyone can help me it would be great!
    I have a Kawai CL20 keyboard, but the keyboard is not recognized by my Mac (iMac i7) which I plugged a USB midi in / out.
    I would like to use my Kawai, as a master keyboard to play all insturments on Garabeband.
    If you have an idea, help me please? thank you
    DARKLNA

    DARKLNA wrote:
    I plugged a USB midi
    a MIDI what? is it Mac compatible?
    DARKLNA wrote:
    I plugged a [...] in / out.
    be sure you plugged them in correctly:
    http://www.bulletsandbones.com/GB/GBFAQ.html#controllertointerface
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Cannot switch after restart because bluetooth not recognized

    I am having a problem switching from OSX to windows because my bluetooth keyboard is not recognized during restart. So i am not able to hit the Alt(option) button while restarting to get the option of switching. Is there a way to fix/go around this?
    thank you.

    Not really - that would be the easiest option; I also have an older keybord nearby (also because Bluetooth is not as 100% troublefree as a wired connection). So, yes buy a third party keyboard or borrow one from a neighbor...

Maybe you are looking for

  • Find a string in a file and write a new text after it

    hi i try to search a string in a small text file. after this position I should write a new text (it is not the end of the text, it could be somewhere between). I tried to solve this with the StrginTokenizer, but it does not work properly, any other i

  • How to change the filename in @include file?

    I want to do a checking before deciding to include which file, for example, <% if(isValid){ %> <%@ include file="abc.jsp" %> <% else{ %> <%@ include file="def.jsp" %> <% } %>but the code above doesnt work in my JSPs any idea how to solve this? thanks

  • Compatibility of IE9 with Adobe Acrobat 9 PDF printer

    Hello, I know from reading this document that the Adobe Acrobat PDFMaker is not supported in IE9: http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html Does this only apply to the PDFMaker utility located within the bro

  • Passing Multiple Selected List Items to a "New Item" Form in Another List with Multiselect Lookup Field

    Hi! Version Info:  SharePoint 2013 Server Standard (*BTW...I do not have access to Visual Studio*) I have two lists, let's call them -Assets -Asset Checkouts "Assets" is the parent list, and "Asset Checkouts" has a lookup column (multiselect) which i

  • Java 2D and 3D issue

    Hello everyone, I'm new to Java graphics and have been trying to figure out the best way to improve my particular application. It is dynamic and refreshes at about 75Hz. It contains lots of data points and seems to flicker a lot. I've concluded that