HT5634 how to keep boot camp from changing time?

As I go back & forth between Mac and BootCamp, the operating system time changes. How can I make it consistent between the two?

Hi there,
You may find the article below helpful.
Boot Camp: Computer may not always show correct date and time
http://support.apple.com/kb/ts1285
-Griff W.

Similar Messages

  • How to keep visited links from changing color?

    FIRST, I want to say that it took me 10 minutes to find (accidentally) how to start a new thread.  In my profile?  Could it be any more obscure?
    </rant>
    Yeah, I go to change page properties and make links and visited links the same color.  It still changes, and this happens to be on a page where the background color provides poor contrast to the color the links are changing to.  Is there a way to do this that is not overridden by the web gods?  Or whatever?
    Thanks

    Yeah, I'm a dinosaur.
    Learned HTML from Elizabeth Castro's first edition; then went to DW MX,
    where I am stuck.  Works for me, obviously with imperfections, as I am
    hardly cutting edge multimedial gripping Web designer.
    Thanks for observations.
    I'll ask for help again: I really, truly, cannot find how to start a
    thread on the forum, nor reply to one, and all that.  I don't see any FAQ
    tht elementary, nor anyone to e-mail for guidance.  If you can offer a
    little of that, I will be grateful.
    Thanks,
    Denno
    It's a very dated website using extremely outdated code.
     
    There's a whole mix of HTML formatting and font tags in there which were
    deprecated 10+ years ago.
     
    This all means that the website will behave in strange ways sometimes.
     
    Although it can be fixed, it would take hours to debug, explain and
    implement the changes required, particularly if you've never used CSS
    styling before.
     
    You're better off investing some cash in a modern, well coded, CSS
    formatted template which will give you a sound foundation.
    e.g. http://www.projectseven.com/products/templates/index.htm
     
    Then you can add your content and get good results quickly.
    >

  • How to keep ipod touch from changing networks

    I want to lock my iPod touch 2G to a specific network and not have it change and drop it's connectivity. I have ten networks at work and it keeps jumping from network to network. Any ideas on doing this?

    if wifi networks in settings
    there is an option called
    "ask to join networks"
    you may want to set that to no if you
    dont want the ipod touch to select the network
    with the best signal quality

  • How do I keep my teens from changing their apple ID passwords?

    How do I keep my teens from changing their apple ID passwords?

    you can't really even if you block them found doing so from their phones then
    they can go to this page from any computer or phone with a web browser
    https://appleid.apple.com/

  • How do I stop GoLive from changing the location of my CSScriptLib.js file?

    How do I stop GoLive from changing the location of my CSScriptLib.js file?
    I am making rollovers and want my CSScriptLib.js to be in the same folder as my HTML files.
    Every time I edit the rollovers GoLIve recreates the path of the CSScriptLib.js to file:///Users/xxx/Library/Preferences/Adobe/GoLive/Settings8/JScripts/GlobalScripts/CSScr iptLib.js so it won't work when uploaded. I always need to edit my HTML before uploading. All I want it to say is src="CSScriptLib.js" as the default.

    The site file is a database that keeps track of all your assets (and much more), including the scriptLib file. As soon as the page is saved (when you use the site file and it's open) the link will be change to the correct path that will work on the server.
    If you're not using the site file you might as well use a text editor, since most of GL functionality is gone.

  • Forgotten how to install Boot Camp

    I had to reinstall Windows 7 64-bit because I needed more space for Mac OS X. After reinstallation, which went perfectly, I have forgotten how to install Boot Camp. This MBP 3.1 will not install Boot Camp from the Snow DVD because it says that 64-bit mode isn’t supported (not true). I installed several components by hand. All I remember from the old style of bulletin boards was to copy the Windows contents of the DVD on to the desktop, then to use SuperOrca to modify the ISO. I don’t, however, remember the exact details of what was supposed to be modified and how to do it. This is also supposed to prevent the error of Apple Software Update not recognizing the installation of BC 3.2 after it was done.
    I can’t find the old instructions with the new format, so any help is appreciated. Peace.

    Ok do this...
    Insert your Windows Bootcamp Drivers Disc (aka OSX Install disc that came with your computer).
    When you see the prompt from Windows Explorer, instead of clicking the "setup.exe" option scroll down and click in the Explore/view files (or something like that, don't remember.)
    Look into the folder labeled as Bootcamp, then click another folder called "drivers", inside there should be another folder labeled as "Apple".
    Inside, there should be a file labeled "bootcamp64.msi".
    Single click the file (bootcamp64.msi) and once it's highlighted, do a right click ( to do you must do the following key combo Shift+F10)
    A right click menu should appear. One of the options is labeled as "Troubleshoot Compatibility".
    A dialog should appear, click on the "Start Program" option when it becomes available.
    The Bootcamp Driver Wizard should now appear. Follow the prompts of Bootcamp Assistant as always.
    Drivers will install automatically.
    Reboot.
    Welcome to Windows 7 64-bit on your now Dual-Citizen Mac...
    Report back with your results...

  • How to install boot camp on my macbook pro?

    How to install boot camp on my macboo pro 15-inch early 20011?

    Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/

  • How do I prevent Pages from changing earlier parts of a document when I am in an 8 page newsletter. Going back to check something and items are jumbled up!

    How can I stop Pages from changing parts of a document when I am progressing through an 8 page newsletter. When I go back to check something some headings have moved and been put out of context. I can't lock the individual pages of the document to prevent this happening.

    The Amazon iWork '09 is a DVD in a boxed set.
    Downloading is transferring something from the Internet.
    I think you are talking about not having a DVD drive?
    To install the DVD version, either get an external USB DVD drive, they are cheap on eBAy or borrow another computer and drag the iWork Installer onto a USB Flash Drive and install from that.
    Peter

  • How to get boot camp in the emac

    how to get boot camp in the emac

    Furthermore, eMacs can only emulate the Windows environment, whereas Intel CPU Macs including the iMac you have running 10.6.8 can virtualize Windows.  Emulation is a poor man's solution, because software is used to replace functions that normally take place with hardware.  You can use the iMac to do any data conversion before it gets sent back to the eMac over a network.  See my FAQ* regarding Windows on the Mac:
    http://www.macmaps.com/macosxnative.html#WINTEL

  • How to stop  the users from changing the Decimal in SAP

    How  to stop  the users from changing User Profile

    Hai,
    It is not possible to restrict SU3 to display, because it has only S_TCODE has the authorization object.
    If you really want to restrict users from changing their profile you have to remove the SU3 access and give SU1 or SU2 which gives access only to Personnel details and Parameters.
    Hope this helps.
    Regards,
    Yoganand.V

  • How do you boot up from a 2nd drive?

    I will be installing a 2nd drive and doing a clean instal of 10.6. How do I boot up from this drive, and then how do I transfer the files, favopurites and email etc across?

    You asked if it transferred every folder. I answered that Migration Assistant does not transfer the old System, only your User files. Every single User file.
    Once you have finished transferring your User files, you can stop using the old system drive, or even remove it and set it aside on a shelf as a backup, or wait a week or two and and re-use it for something else.
    Once you boot from a new System drive, / (the root directory) is located on the new Boot Drive,  and new /Users is created there, and everything is referenced from there. Move your User files over as well, and the old drive will not be referenced any more.

  • How to keep track of the changes done in ALV GRID Report

    Hi Experts,
    how to keep track of the changed record in ALV GRID Report. how to set the field to be editable even for the entire row also. Can anybody guide along with code also?...
    Valuable answers will be rewarded.
    Thanks,
    Satish.

    Hi,
    Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
    01 O 1001 B002 Activate box checked
    01 O 1001 B003 Activate box checked
    Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
    If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
    Similarly, you can set up this table for other object types.
    For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
    Hope this helps.
    Donnie

  • How to "Recreate Boot Camp"?

    I have just upgraded Snow Leopard to Mountain Lion.
    I also had to upgrade VM Ware Fusion to 5.0.
    Now, when I attempt to run VM Ware Fusion I get the following message:
    Your Boot Camp installation has been modified since you last accessed it.
    Move the Boot Camp virtual machine to the trash then select "Run Boot Camp" to recreate it. This will not affect the Windows applications or data on your Boot Camp partition.
    I have dragged the Boot Camp virtual machine to the trash but I don't understand what is meant by "...select "Run Boot Camp" to recreate it".
    Select "Run Boot Camp" from where?
    I have tried shutting down the computer and booting from the Boot Camp partition, shutting down again, restarting normally and attempting to run VM Ware Fusion again but I get the same message (above).

    I had the same problem upgrading from VMware 5.0.0 to 5.0.4 with Mavericks. I found the message from Fussion a long way short of helpful and this forum much more so.
    I would add that witn VMware Fussion running choose Virtual Machine Library from the Window menu tab and from there delte the Boot Campl viritual machine and create (add) a new one. I did not have to reinstall windows or any applications.
    I'm sure VMware could make this more obvious in their upgrade process.

  • How to disable other users from changing the status

    Hi,
    The status entry field can be changed irrespective of ownership in Documents.
    I was able to change the status on the document created by other user.
    Example: The status of document was In-Work. The document owner was X. But I was able to change it to Inspection Check.
    How to disable other users from changing the status?
    Regards,
    Shashi

    This is a frequently discussed topic.Please use the search feature.It has been discussed in [previous posts|CV01N: Filter documents by role; in various contexts.
    Regards,
    Pradeepkumar Haragoldavar

  • How do I stop AE from changing my workspace when loading a project?

    How do I stop AE from changing my workspace when loading a project?  I've looked everywhere and can't find it.  I work on a lot of projects that a peer works on and his screen size is smaller and his workspace is different than mine.  Is there a setting I can change so that when I open one of his projects my AE window doesn't change?

    No. That behavior is intended. The problem is probably that your colleague uses the "Standard" workspace in a custom configuration and since it is matched by name, it emsses up your "Standard" workspace as well. Therefore advise your colleague to create his own workspace with a custom name and/or create your own custom workspace to be able to more quickly reset things.
    Mylenium

Maybe you are looking for

  • ITunes no longer asks for password on purchases

    Since upgrading to iTunes 11, it has stopped asking to confirm Apple ID credentials when making purchases.  This was a handy parental feature, so us as parents, could "authorize" our kids downloads/purchases. How can I restore this essential feature/

  • Remove custom captions from cache, CS5

    I created a number of custom captions in CS5.  The captions work fine but are no longer needed.  I removed their .bmp and .fcm files from the Gallery\Captions folder but the captions still appear in the Caption Type drop-down list.  I can't seem to g

  • Macbook No Internet Connection - full bar on airport

    having this problem today. cannot get Internet connection to work. in safari it will load a page or two but wont load anymore. The airport icon in the menubar shows full signal strength all the time. The following messages appear in safari: You are n

  • Sharing in network

    hi, i was just wondering now, after i have shared my music with another comp in the house, is there any way to save the shared files on the recieving computer?   Windows XP Pro  

  • About sms problem in os 6

    Hi , I just installed os 6 on my curve , I did restore to all my data , after so many restarts I found all the sms turned to an empty drafts . I reinstall the os 6 with differnt version , I did restore also same problem happen . Also I tried restore