HT5639 how to install bootcamp on windows 7 64 bit on late 2006 imac

I ma trying to get Windows 2007 ultimate to install boot camp on my late 2006 24"CTO iMac. I am able to install the OS but when it come to install bootcamp it tells me that 64 bit is not supported on this machine. I need to be able to install it so all drivers get installed and the boot selector gets installed.
The machine I know is not true 64 bit and I wish it was a cheap way to make it 64 bit but I can't afford a new Mac at this time.
The specs are:
2.33 GHz Core 2 Duo
4 GB Ram
1 TB HD
256 MB Nvidia 7600GT
24" High Res Display upgrade
Thanks for the help and if it is no way then I am stuck with using the alt or option key at boot to select OXS after a reboot out of Windows 7.
Tim

Your iMac does not run 64 bit Windows. See the following table from http://support.apple.com/kb/HT5634
Mac model
Windows 8, 64-bit
Windows 7, 64-bit
Windows 7, 32-bit
Windows Vista, 64-bit
Windows Vista, 32-bit
Windows XP, 32-bit
iMac (27-inch, Late 2012)
5
5
iMac (21.5-inch, Late 2012)
5
5
iMac (21.5-inch, Late 2011)
5
5
4
iMac (27-inch, Mid 2011)
5
5
4
iMac (21.5-inch, Mid 2011)
5
5
4
iMac (27-inch, Mid 2010)
5
5
4
iMac (21.5-inch, Mid 2010)
4
4
iMac (27-inch, Late 2009) 1
4
4
iMac (27-inch, Late 2009) 2
4
4
4
4
4
iMac (21.5-inch, Late 2009)
4
4
4
4
4
iMac (20-inch, Mid 2009)
4
4
4
iMac (20-inch, Early 2009)
4
4
4
iMac (24-inch, Early 2008)
4
4
4
iMac (20-inch, Early 2008)
4
4
4
iMac (24-inch, Mid 2007)
4
4
4
iMac (20-inch, Mid 2007)
4
4
4
iMac (24-inch, Late 2006)
4
4
4
iMac (17-inch, Late 2006, CD)
4
4
4
iMac (20-inch, Late 2006)
4
4
4
iMac (17-inch, Late 2006)
4
4
4
iMac (17-inch, Mid 2006)
4
4
iMac (17-inch, Early 2006)
4
4
4

Similar Messages

  • How do I install Bootcamp on Windows 7.

    I have just installed Windows 7 on my Mac Mini and now I want to switch back to the Mac OS. When I hold down Alt while booting up to change OS nothing happens.
    The other option is to install Bootcamp to work with windows. It's already on my mac as I used it to install Windows 7. But there is no option to switch OS with Bootcamp as I can't find it on Windows 7. I've seen tutorials on how to install it with a disk but the Mac mini has no optical drive.
    How do I install Bootcamp on Windows??

    At first I was under the impression i had accidentily deleted the MAC OS but thankfully I haven't. I did a system restore on Windows and when it restarted I held Alt and I could select my OS.
    But I still don't have the shortcut to bootcamp showing in windows. How do you make a bootable USB for Bootcamp?

  • How to install itune under Windows XP 64-bit professional with SP2?

    I have iPhone 3GS for over a year and I have set it up at my work computer (Windows XP professional) with latest iTune and it work great. Recently our IT has upgraded our system and all of our new machines has Windows XP 64-bit OS.
    I can't figure out how to install iTune under Windows XP 64-bit, to synch with my e-mail, contact and calendars any more?
    Can any one help?

    New machines? With XP 64-bit? Your IT department is being rather foolish, in my opinion, deploying new installations of XP 64 since Microsoft discontinued mainstream support for it (more than two years ago) and it's never really been satisfactory.
    Anyway, there is no version of iTunes that supports the 64-bit version of Windows XP and almost certainly never will be. If you search the iTunes for Windows forums for "XP 64" you'll find threads describing the process some people have used to "crowbar" iTunes onto XP 64, with varying levels of success, none of them complete. Connecting to iPhones is one of the most problematic issues.
    Regards.

  • I can't figure out how to install Bootcamp 5.

    I recently bought a Windows 8 disc, with the hopes of installing it onto my MacBook Pro early 2011 version 10.8.5. I've read up on all of the instructions, and know how to install windows itself, but I cannot for the life of me figure out how to install Bootcamp 5. The instructions on Apple's support website say I need to open up the Bootcamp 5 folder that I put onto a flashdrive (which I did) and open the setup.exe file while in windows.... "while in windows"... don't I have to have Bootcamp 5 installed before I can have windows installed and open? I tried installing Bootcamp 4 and installing my windows 8 64-bit onto there, but as I suspected, it won't actually install the windows 8 information, because bootcamp 4 doesn't support windows 8 64-bit. This is the first time I've tried doing anything like this before. I don't have windows 7, or bootcamp 4, or parallels, or anything like that. After giving it a lot of thought, I'm beginning to worry that Bootcamp 5 can only be installed if you already have windows 7 on bootcamp 4, and you're just trying to upgrade. I really hope that's not the case, because I've already spent over $200 on the windows 8 disk, and I can't return it. If somebody could please tell me how to install Bootcamp 5, if it's even possible without windows 7 already on bootcamp 4, I would really appreciate it...
    Thanks!

    So I never installed grub or syslinux. You may want to reread the beginner's guide and specifically the section on efistub: https://wiki.archlinux.org/index.php/Beginners'_Guide#EFISTUB
    Roughly summarized, condensed, and paraphrased it goes like this (and leaving out stuff you don't need):
    Look at the output of "lsblk." It will probably show a 200MB partition as /dev/sda1. This is probably your UEFISYS partition.
    Mount the UEFISYS partition at /mnt/boot/efi, chroot and copy the kernel and initramfs files as described below.
    Create /boot/efi/EFI/arch/ directory.
    Copy /boot/vmlinuz-linux to /boot/efi/EFI/arch/vmlinuz-arch.efi. The .efi file extension is very important as some UEFI firmwares refuse to launch a file without this extension. Important: Remember that the file is called vmlinuz, but not vmlinux.
    Copy /boot/initramfs-linux.img to /boot/efi/EFI/arch/initramfs-arch.img.
    Copy /boot/initramfs-linux-fallback.img to /boot/efi/EFI/arch/initramfs-arch-fallback.img.
    Every time the kernel and initramfs files are updated in /boot, they need to be updated in /boot/efi/EFI/arch. This can be automated either using systemd or using incron (for non-systemd setups).
    You will find more nuggets here: https://wiki.archlinux.org/index.php/UEFI for your future improvements.
    Create a refind_linux.conf file with the kernel parameters to be used by rEFInd:
    # nano /boot/efi/EFI/arch/refind_linux.conf
    "Boot to X" "root=/dev/sdaX ro rootfstype=ext4 systemd.unit=graphical.target"
    "Boot to console" "root=/dev/sdaX ro rootfstype=ext4 systemd.unit=multi-user.target"
    Note that instead you may want to use a line similar to
    "Boot to X" "root=PARTUUID=78b89af1-8445-4f8d-bfed-9f57b96ee0a7 ro rootfstype=ext4 systemd.unit=graphical.target"
    Those two things pretty much did it for me: copy the kernel files into /boot/efi/EFI/arch (after you mount the UEFISYS partition there!!!) and make the refind.conf file.

  • How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

    How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
    I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems.  When we finally decided to cut over to SBS 2008, that’s when everything went to hell.  I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box.  During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations.  There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb.  After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
    I have attempted in this white paper to detail the steps to assist others who may be in a similar situation.  I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine.  BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true.  Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box.  After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging.  Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
    From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer.  The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe!  By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost.  Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded.  At any rate, take your time and follow the steps to achieve a successful installation. 
    PRE-INSTALLATION TASKS
    Back Up SBS
    It’s always a good practice to backup your server before deploying any kind of major system changes.  Although this step is optional, I recommend it in case you need to restore your server for any reason.  Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone.  You will need a full backup with system recovery information to restore.  Here are the basic steps:
    Click: Start > Programs > Administrative Tools.  Right-click “Windows Server Backup” and choose “Run as administrator”.
    Click “Backup Once” under Actions in the right-hand pane.
    Choose the “Different Options” radio button under Backup Options.
    Choose the “Custom” radio button.  What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
    Select the “SYSTEM (C)” checkbox, uncheck any others.  Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
    Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups.  You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images.  Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency.  Also, make sure the “Verify after writing (recommended)” checkbox is selected.
    Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product.  If like me you rely solely on SBS for your backups, choose the full backup option.
    Confirm everything and click “Backup”.  This process may take several hours depending on the size of your system.
    Verify ISAPI Filters:
    In IIS Manager, double-click the server instance in the left-hand pane.
    In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS.  If it’s set up correctly you should see two entries:
    IsapiFilterModule              %windir%\System32\inetsrv\filter.dll
    IsapiModule                        %windir%\System32\inetsrv\isapi.dll
    If either of these modules are missing, you will need to re-install these (google for a solution).
    Set Up Development Environment
    Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\).  For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
    Copy and paste your CFML files and directories into the new DEV root Web directory.  This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders. 
    Open IIS Manager and double-click the server instance in the left hand pane.  Expand the “Sites” folder.  Right-click the Sites folder and select “Add Web Site”.
    Enter a name in the “Site Name” box (e.g., “test-site”).  You will notice that the system will automatically create a corresponding Application Pool with the same name.  NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
    Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
    Don’t worry about testing the connection.  If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV).  Don’t worry about this for the time being.
    Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”).  Click “OK”.
    Configure Application Pools for Installation
    In IIS Manager, double-click the server instance in the left-hand pane.  Click on “Application Pools” to display the list of server application pools in the center pane.
    In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
    Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”.  NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
    Modify the application.host.config File for 64-Bitness
    Click: Start > Programs > Accessories.  Right-click “Notepad” and choose “Run as administrator”.
    Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
    Do a search and change this one line from:
    <add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
    To this:
    <add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
    Restart the IIS Admin service.
    Set HTTP Compression
    According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
    Click: Start > Programs > Accessories.  Right-click “Command Prompt” and choose “Run as administrator”.
    At the command prompt, change directory to intetsrv by typing: cd inetsrv
    Run the following command:
    C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
    This will turn off HTTP compression for all sites in IIS.
    In IIS Manager, double-click the server instance in the left-hand pane.  Double-click the “Compression” icon in the IIS section of the center pane.
    Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
    Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
    Restart the IIS Admin service.  This should enable compression and coldfusion to work at the same time.
    NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
    C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
    INSTALLATION TASKS
    Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
    Right-click the file and select “Run as administrator”.
    Accept the terms of the License Agreement.
    If you have an Enterprise license, enter it.  For our purposes, just click the “Developer Edition” checkbox.
    Select “Server configuration” – the default radio button.
    I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”.  It should be fine, particularly if you install documentation.  My preference was to keep the install as plain vanilla as possible.
    Select the directory path for Coldfusion to install into – default is :C\Coldfusion
    THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS.  Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button.  Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”.  Hit “OK”.
    Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”).  Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”).  The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
    Enter an Administrator password.
    Choose to Enable RDS, or not.  I enable this by preference but it is not required.  This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely.  Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
    Confirm everything to kick off the install.
    If all goes well you should see a message at the end stating that the install was successful.  I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install.  NOTE: we will open it a different way during the post-installation tasks.  The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
    POST-INSTALLATION TASKS
    Verify CF Installation:
    The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8.  The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory.  Our CFIDE files, however, are located within: D:\DEV.
    To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
    This should bring up the Coldfusion Administrator Login screen.  Enter in the Administrator password you created during the install to log in and configure your application server.
    Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
    Fix Application Pool Defaults to Re-enable SBS Web Applications:
    At this point, Coldfusion Administrator and your test CMFL Web site should be working properly.  The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start.  Fortunately, this is easily remedied by performing the following steps:
    In IIS Manager, double-click the server instance in the left-hand pane.  Click on “Application Pools” to display the list of server application pools in the center pane.
    In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
    Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time.  This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.).  There is no need to restart IIS.
    Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
    In IIS click to highlight the application pool for your new site (e.g., “test-site”).  In the right-hand pane, click “Advanced Settings”.  Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
    Lastly, jump up and down for joy!  Hopefully now, everything is working.  Best of luck!! ..Paul D (MCP).

    First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
    Second, this is probably your problem right here:
    http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
    In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
    As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
    Dave Watts, CTO, Fig Leaf Software

  • How to install office 2013 window on imac

    how to install office 2013 window on I Mac do I have to use the bootcamp to install it ?

    It does not run on Macs, only on Windows. So, yes, you would need to install Windows on your computer or:
    Get Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion/Mountain Lion.
    These two suites are similar to Libre Office:
    NeoOffice - $30.00
    Open Office

  • I am trying  to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

    I am trying  to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

    CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
    directly for serial number issues.

  • How to install Windows on MAC? (Can't see the check box "Install or remove Windows 7 or later version" on Boot Camp Assistant)

    I want to install Windows 7 on my MBP mid 2012 but in Boot Camp does not appear the check box: "Install or remove Windows 7 or later version". I continued with making the USB bootable with Windows 7 but then when I restart and boot with the USB I still can't install Windows because then I receive an error: ""Windows cannot be installed on this disk. The selected disk is of GPT partition style."  
    From OS with Boot Camp I didn't manage to make a partition for Windows instead I made one with Disk Utility (formated FAT).
    After booting from USB that partition was also formated into NTFS necessary for Windows. Still the same error.
    Any idea how to install Windows on my MAC?

    My Windows copy is a X64.
    MBP mid 2012 with Mountain Lion 10.8.3.
    Model Identifier:          MacBookPro9,2
      Processor Name:          Intel Core i5
      Processor Speed:          2.5 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          3 MB
      Memory:          4 GB
      Boot ROM Version:          MBP91.00D3.B08
      SMC Version (system):          2.2f41
    Should have:
    MacBook Pro (13-inch, Mid 2012)
    MacBookPro9,2
    MBP91.00D3.B08 (EFI 2.9)
    If you are refering to this I tried to update the EFI version (I see only SMC version 2.9 as a diferrence of what I have)  but on installing I received an error: "This software is not supported on your system."

  • How to install RAC on windows

    Can anyone tell me step by step how to install RAC on windows advanced server. I want to know whether RAC must need Microsoft Clust Service. When I create a cluster with clustersetup.exe, I'm told that it's need oracle partition, but I don't know how to make it.
    thanks advance!

    Hi, I am Nirmal ([email protected]) Please try this out
    Requirements:
    H/W: External shared hdd
    RAM: 256 MB
    OS:win Advance server ,win 2000
    PATCH:
    The Windows CFS and Clusterware Patch for 9.2.0.6 -- available in Metalink under Patch number 3973928
    The 2.2.0.18.0 Oracle Universal Installer -- available in Metalink under Patch number 2878462
    The 9.2.0.6 RDBMS patchset -- available in Metalink under Patch number 3948480
    1.Install shared disk array.
    2.Install cluster interconnect and public Network hardware
    a)Create two entries of NIC-Ensure Public IP listed at the top and private IP should be listed below the public IP.
    b)Inter connection between two nodes are connected by switch.
    3.Ensure the IP/Hostname of all node is entered in hosts file.
    4.Ensure the temp /tmp directories are same accross all node.
    5.Ensure that all nodes have same local admin name which has full access on the oracle home drive and win home drive.
    6.Run the final clustercheck which is available in patch 3973928 which will check the above process if any incorrect it will indicate.(Location is 3973928\Disk1\preinstall_rac\clustercheck subdirectory).
    7.Prepare the Logical Drives in Windows dont format or give any drive letter.
    8.Install and Configure Cluster software with RAW Datafile.
    a)Install oracle home on NTFS partitions and Datafile on Shared Logical Partition.
    9.Run Oracle cluster setup wizard.
    a)Click clustersetup command line.
    b)A welcome page launches click next.
    c)Create a cluster. click next.
    d)Choose "user private network for interconnect" and click Next.
    e)Network config page appears, enter the cluster name. then enter the public hostname for all nodes. Accept the default or change as appropriate for your cluster configuration. click next.
    f)Cluster file system option page appears. Choose No Cfs. click next.
    g)Disk config page appears. Click "Create Oracle Symbolic links button" label as srvcfg to the partition we have created.
    h)Oracle Object link Manage window appears:
         1)From symbolic Link column, select an empty row.
         2)Type in the desired datafile link name and hit enter to save
         3)click apply button to commit.
         4)When the progress bar at the bottom of the screen stops      moving choose close.
    i)VIA Detection screen appears. Choose yes or no depending on your config.(VIA-Virtual Interface Architecture).
    j)Install location screen appears. its default win_home\system32\osd9i accept .click finish.
    k)Cluster setup window appears if no error it will complete and close automatically.
    l)Check the serices,
         1.oracleobjectservice
         2.oracleCMService9i
    (if any error check the error log)
    10.Install the 22018 OUI
    a)home oracle_home.
    b)Click all nodes and install.
    11.If necessary install RDBMS Software into oracle home.
    RAC Database using DBCA::
    a)Create listeners using Net configuration assistant on each node
    b)Run DBCA from command prompt.
    c)Welcome page displays with the selection to create a cluster or
    single instance database. choose oracle cluster database. next
    d)Operation page is displayed. choose create database. Next.
    e)Node selection page. Select all nodes. Next.check OracleGSDService
    is running on all nodes.
    f)Database Templates page is displayed. Choose new database. next.
    g)Database Identification page. Enter the Global Database name and
    SID (oracle will register SID prefix with a number, this will
    become the SID of each node.)
    h)Option page for java and inter media database. Choose according to
    your need.
    i)Connection option select dedicated or shared server .
    j)Initialization parameter page. Add required values.
    k)Database storage window.(ensure the storage information points to
    the symbolic links specified in cluster.)
    l)Creation page displayed, click finish.
    m)DBCA summary page click create database and ok.
    Note:
    1)During Java creation it may slow down or hang. Check the CPU
    usage and at 95-99% it will slow down please wait check the log.
    2)ORA-29807 error may come. Ignore it its a (bug 2925665).
    3)alter installation run the script prvtxml.plb, utlrp.sql
    4)Any other error please check the alert log.
    Message was edited by:
    user474717

  • Preparation for installing bootcamp and windows 7, and in the absence of a DVD drive

    I am not sure that I submitted this with the right boxes ticked, so i am re submitting it!
    In preparation for installing bootcamp and windows 7, and in the absence of a DVD drive on my MacBook Air, before starting, can I partition my external drive (for use with my Mac) to have an ISO image file location for Windows downloads? 
    Cyfromayo

    The Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/
    The Boot Camp Discussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp

  • How to install acrobat in windows 7 ?

    please help how to install acrobat in windows 7 ? when i install mobile spy software web account in my pc there is update massage about acrobat.
    thanks

    Hi,
    Is Acrobat already installed on the machine?
    Please share the screen shot of the error/warning message.
    Regards,
    Anand

  • Can I run a windows software program taht is on a CD on my macbook pro after I install bootcamp and windows xp home?

    Can I run a windows software program that is on a CD on my macbook pro after I install bootcamp and windows xp home?

    genepaquin,
    the last MacBook Pros that supported installing Windows XP in a Boot Camp partition are the Mid 2010 models. If your MacBook Pro is newer than that, and you don’t have a newer version of Windows to install into a Boot Camp partition on your MacBook Pro, then you might consider an alternative such as running Windows with the help of programs such as VirtualBox or Parallels Desktop rather than through Boot Camp.

  • Am I reading the absence of response of preparation for installing bootcamp and windows 7 correctly?

    Hi,
    Am I reading the absence of response on "preparation for installing bootcamp and windows 7", correctly?,
    There is a number of BOOTCAMP problems? which have no successful outcome yet?

    Pete
    I think that I should have said, Am I reading into the absense of response correctly, (after failed attempts to get a response) on the BOOTCAMP preparation issue.
    there is no Link that I can find solutons on, just a number of questions in the MORE LIKE THIS frame.
    Cy

  • How to install icloud on windows vista?

    how to install icloud on windows vista?

    Use iCloud control panel version 2.1.2 from here: http://support.apple.com/kb/DL1687.

  • How to install 10g on windows 2000

    Hello
    Please guide me step by step as how to install 10g on windows 2000 .
    I am a beginner and I want to install this setup in my office.At present we are using oracle8i on windows 2000.We want to do a fresh installation in a new setup and hence for the time being we are not going for upgrade or migration from 8i
    Please guide me .
    Thanks in advance.

    Just follow the installation guide, that's all you need,
    http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm
    Make sure install Oracle 10g into different ORACLE_HOME than 8i

Maybe you are looking for