HT5639 Mavericks on MacBook Pro with existing BootCamp?
I'm unable to install Mavericks App - no response when clicking [Install App] button in AppsStore. Please advise fix. I have Lion 10.7.5 on my MacBook Pro (Retina Display). I also have existing Boot Camp on same laptop, partitioned 80:20.
Hey Balkano91,
Thanks for the question. I understand you are experiencing issues installing Windows with Boot Camp. The error message you described is outlines in the Installation Setup guide. You may want to check to make sure you're logged in as an administrator:
Boot Camp Installation & Setup Guide
manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_10.8.pd f
If you have problems installing Windows
If you have problems installing Windows, try the following solutions.
If you get a message saying “Installer Disc Not Found” when installing Windows
Make sure you’re logged in to OS X as an administrator.
If Windows doesn’t install properly
Verify that you’re using an original, full version of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, or Windows 8 Pro.
Restart your Mac and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc into the optical drive or insert the USB flash drive with Windows into a USB port on your Mac. Select the Windows installation disk icon, then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
If the Windows installer isn’t responding
Be sure you are using the original keyboard and mouse that came with your Mac.
If you’re using an Apple mouse, the Windows installer may not respond if the mouse is connected directly to your Mac. Connect the mouse to the USB port on your keyboard.
If you insert the wrong disc during installation
Eject the disc by holding down the Eject key on your keyboard while restarting your Mac.
Thanks,
Matt M.
Similar Messages
-
My Big failure to install maverick in Macbook Pro with retina
Please I NEED HELP i bought macbook pro with retina display i tried to install mavericks but i failed at fortunately i formatted the ssd HELP ME TO INSTALL MAVERICKS.
When i was trying to clean installation it failed to complete.
At what step did it fail to complete?
How are you installing Mavericks, a usb disk, a dvd or recovery mode. -
I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either - can anyone help please?
Download the iPhoto upgrade from the App Store. It should be free.
iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform. -
I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?
I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone??? -
Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.
My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there. -
How to mount iPhone 3gs on a macbook pro with maverick ?
how to mount iPhone 3gs on a macbook pro with maverick ?
There are unsupported mechanisms of doing what you want. You can search for iTunesFS.
Garage Band should allow you to send Ring Tones to the 3GS via iTunes - GarageBand '11: Send an iPhone ringtone to iTunes -
Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?
Was your Bootcamp info.plist manipulated to change any options?
-
As is said my HP w2207h monitor is not working with a minidisplayport to hdmi adapter and a hdmi cable which is working fine for my PS3. So the cable is not the problem. And on my TV i also have no problems at all activating a second monitor. Therefore the adapter isnt the problem either. When i plug it in the typical bluescreen appears. Then after a few seconds it appears again and there is no second monitor recognized. I also used the "recognize Monitor" button without success. Please help me, are there any special drivers or something like that ?
PS: bought a high end expensive adapter now because the old one was very cheap. But didnt help. Still stuck on the macbook not recognizing anything !If you have an external drive you can hook up to the MacBook Pro I believe there *may* be a solution by getting an image to the MacBook Air.
On the MacBook Pro with the Windows install disk in the DVD drive fire up disk utility. Select the DVD and then hit the "New Image" button. Disk Utility should offer to create a disk image from the DVD. I would put that disk image on a USB drive connected to the Pro. You should be able to mount that image when you connect up to the Air. Hopefully BootCamp will be able to access that all through the process.
If that doesn't work (the drivers don't recognize the disk image once Windows gets underway for its install), you might try copying the installation files from the DVD to FAT32 formatted USB stick or drive and then using that to install Windows. I would expect Windows would be able to see the USB FAT32 drive and I don't believe any file on the drive is going to go beyond 4GB.
I haven't actually tried BootCamp on the Air, since I just use VMWare which has no issue installing from anything OSX can see. But BootCamp is going to eventually hand off operations to Windows and that's going to complicate matters--Windows has to be able to see the drive. While I believe there are drivers that let Windows connect to that drive, there's no way to authenticate (or even load the drivers I expect) before Windows itself is loaded--so it's a "chicken/egg" problem. -
I am trying to find an app or software to burn iMovie 11 slideshow to a dvd. I have a MacBook Pro with Mavericks. There are a lot of DVD Creator apps at the App store. Looking for a recommendation of what to use and tips. Thank you.
I've been using "Burn" for years and it has been the only DVD burning software I have ever used for the mac. I have never needed to look at other apps. Unless you want something that has more bells and whistles such as Roxio's "Toast" : http://www.roxio.com/enu/products/toast/pro/overview.html
There are thousands of quality free apps out there for the mac that are not part of the App Store. All you have to do is read reviews online, do a little search, the Apple forums are full of recommendations from experienced users that have been here for years... -
I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise? During installation emptied cache, etc. Backed up using time machine, fortunately.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Install windows 7 on my macbook pro with bootcamp.
I am trying to install Windows 7 off of a dvd version of windows on my macbook pro with bootcamp. I have gotten to the installer screen of windows 7 and each time I proceed, I get an error message saying it does not recognize my drivers. I installed the drivers from bootcamp on a freshly formatted usb drive. I don't understand why it won't read the drivers.
SchafHund wrote:
the computer model is a 13" a1278 mackbook pro mid 2011 and its windows 7 premium.
32 bit or 63 bit Windows?
From the Boot Camp System Requirements page located here: http://support.apple.com/kb/HT5634, there is no mid 2011 13" Macbook Pro.
Here are your choices and the correct Windows Support software version to use:
MacBook Pro
(13-inch, Late 2011)
5
5
4
MacBook Pro
(13-inch, Early 2011)
5
5
4 -
I have a mid 2010 macbook pro with 4GB memory and need to purchase an additional 4 GB to. Do I need to purchase 8GB of memory to upgrade or can a 4GB upgrade be placed next to the existing memory?
You need to purchase 8 GBs as two 4 GB modules. Must meet these requirments:
Maximum Memory
8.0 GB
Memory Slots
2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM -
How to make boot disk for MacBook Pro with Mavericks pre-installed
Hi -
I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0). I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion. In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk. In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed). I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks. Thanks very much for any help anyone can provide.
ShellyOpen App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time. -
How do I run Windows software on my MacBook Pro with OS X Mavericks
How do I run Windows software on my MacBook Pro with OS X Mavericks? I want to run a TurboTax program to amend an old tax return. Program is not available for OSX.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive. -
Where are the backup files for my iPad located on my macbook pro with maverick ?
where are the backup files for my iPad located on my macbook pro with maverick ?
As an addendum, if I need to, and hopefully won't, unless I switch computers, how can I revert from a copy of a different backup? Thanks. :-)
Maybe you are looking for
-
What is the issue?
-
How to batch process (color correct) multiple MXF files?
Newb here with a question I cannot find an answer for. I'm very new to CS5.5 and am very frustrated with something that should be a simple procedure, at least it was with my last NLE. I am shooting amateur hockey games using a Canon XF100. Typically
-
recently "lost" a purchased song, (Plus the accompanying artwork) from my i-tunes library, after upgrading my O.S. from windows XP to windows 7. Is there any way to get the original song back, or, at least, re-purchase it?... I tried to do the latter
-
From CS2 32-bit to CS5.5 64-bit
I have CS2 Design Standard installed on my old WinXP 32-bit. Now I've got a new PC with Win7 64-bit and I want to buy the upgrade to CS5.5. So my questions are: 1. Can I upgrade a 32-bit suite (CS2) to a 64-bit suite (CS5.5)? 2. If so, do I need to f
-
Hi gurus, I am having a hard time with some XML data. I have posted on that forum, but so far I have not been able to solve the problem. Thus I used a way to get the data from the XML that results in deplicates, as follows, ChargeKey ChargeSequen