HT5642 Ipad2 updates

How do I update my ipad2 to ios6.1 thanks db

You only have the Software Update option in the settings if you are already running iOS 5. If you are trying to update the iOS, you have to use iTunes on a computer to update the iPad.
From iOS 4 or lower - Here are the instructions.
http://support.apple.com/kb/HT4972
More instructions here - for all iOS versions.
http://support.apple.com/kb/HT4623
Or you can connect the iPad to the computer, launch iTunes. Select the iPad under the devices heading on the left, click on the Summary tab and then click on Check for Update

Similar Messages

  • Both my iPod touch and wife's iPad2 updated to iOS 6 and now no network

    Both my iPod touch and wife's iPad2 updated to iOS 6.
    They both say they are connected to the wireles, but Safari and all Internet apps say there is not internet connection.
    Both our MacBooks connect fine to the Internet.
    I assume there will be an iOS6.1 to fix this soon.

    is there a solution to The Problem iTunes 10.7 - ICU 3.5 ?
    Lars

  • IPad2 update to iOS6 will no longer play UTube: All my favourites that were previously viewed and saved with my iPad2 will no longer play. They can't be played via Safari either SOLUTION PLEASE (buy iPad3 which solves the issue isn't an option)

    IPad2 has been updated to iOS6 and will no longer play UTube favourites. These are favourites that have been previously viewed on iPad2 therefore I know the device is capable of playing them. This upgrade is no longer allowing me to use the device for the reason I bought it.
    Apple, I'm feeling as though I've been conned.
    My mates iPad3 on iOS6 plays all the stuff my 2 will no longer play.
    UTube via safari won't play them, all Apps I've tried have the same problem, a red band stating this video can't be played on your device OR flash player required. Has anyone got a solution???? Please don't write stating you have the same problem, I just want solutions. Thanks

    https://itunes.apple.com/us/app/jasmine-youtube-client/id554937050?mt=8
    This app should solve your headache

  • Ipad2 Update 5.0.1

    Hi,
    Lastnight i updated my iPad2 and i received an error when backing up the error closed down but i think it was 1603 but could not be certain, but it was a restore error, now my iPad2 has a black screen with the logoi and an empty progress bar nad iTunes doesnt recgonise it but my PC does when connected. i am unable to get into any funactionalities of the iPad
    Any help would be greatly appericated
    Stef

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Ipad2 Update Problems

    I have the Ipad2.  All the latest updates require IOS 5.0 or later which I don't have.  ITV player won't let me update nor will it let me use the app I have loaded so I can not watch ITV anymore. Also I downloaded the latest version of Facebook yesterday and now it just crashes everytime I try to load it. I have tried deleting and reinstalling but no joy. Can anyone help?

    You're to the point where you need to update your iPad. The most current iOS is 6.01
    Plug it into your syncing computer, open iTunes and follow the promots (I would sync first so you have a recent backup, then update, just in case)

  • Apps no longer work after installing ipad2 update 4.3.5

    Apps no longer work after installing IPad 2 update 4.3.5

    i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

  • Cannot download latest ipad2 update

    cannot download latest ipad 2 update (a 7 hr download?)-says my internet has timed out, as far as I can tell, all connections are fine.What is going on?

    Other people have had success downloading (after getting network timeout error) after temporarily turning off their firewall and antivirus

  • IPad2 update to iOS5 failed and restore fails with error code (6)

    I have updated my iTunes to version 10.5 (on Windows 7 32-bit). After that and creating a back up of my iPad, I started the update to iOS5.
    For some unclear reason it failed. The only option left was to do a restore.
    This restore process starts and I see a progress bar on the iPad.
    However iTunes comes up with an error message (translated from Dutch): "The iPad iPad cannot be restored. An unknown error code has occured (6)".
    Whatever I try my iPad only shows the iTunes Logo with the USB connector.
    Can anybody advice on how to I get my iPad running?
    Regards,
    Frans.

    Only after submitting my question other answers were shown. The error code to which 6 refers is shown on the next page: http://support.apple.com/kb/TS1275
    In effect: I had to shutdown my Firewall! (How close do you have to be with a vendor).
    After the Firewall (ZoneAlarm) was shutdown, the restore worked. and it gave me iOS5

  • Problem with ipad2 update

    Hello there!
    I was updating my ipad 2 to ios7 this morning when I was prompted on the screen to plug it to Itunes.
    When I did that, a message came out saying: itunes has recognized an ipad in recovery mode
    Update and restore
    I clicked and waited for 2 hours. It kept stopping and telling me there was an error in connection or connection timed out, whereas the connection was great.
    And now I cannot update or use my ipad. I still have the same figure of the usb and itunes on the screen.
    i have tried all the steps mentioned online but nothing worked.
    Do you have any solution to this problem?
    Moreover I didn't back up my ipad before starting the update!
    Thx

    Try this:
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings
    (no media or data will be deleted from the device, this will only take a minute).
    If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
    How to back up and restore (iCloud and iTunes) 
    http://support.apple.com/kb/HT1766
    iTunes: Backing up and Restoring iOS software

  • Find my iPhone stuck on installing following ipad2 update

    I have just updated my iPad 2 's operating system to IOS6.1.3.
    The app find my iPhone is stuck on installing and nothing seems to be happening.
    Any ideas on how to fix this? 
    Thanks

    Hi there jilaru,
    You may find the information in the article below helpful.
    iOS 7: Understanding Location Services
    http://support.apple.com/kb/HT5594
    Improve GPS accuracy2,4
    GPS accuracy varies depending on the number of visible GPS satellites. Locating all visible satellites can take several minutes, with accuracy gradually increasing over time. Use these tips to improve GPS accuracy:
    Ensure the date, time, and time zone are correctly set on the device in Settings > General > Date & Time. If possible, use Set Automatically.
    Important: Incorrect settings on your computer can sync to your device. Verify the date, time, and time zone on any computer that syncs with your device.
    Restart your device.
    Verify that you have a cellular or Wi-Fi network connection. This allows the Assisted GPS (A-GPS) on the device to locate visible GPS satellites faster, in addition to providing initial location information using the Wi-Fi or cellular networks.
    Note: Microcells (sometimes called Femtocells) aren't supported with Location Services.
    Maintain a clear view of the horizon in several directions. Keep in mind that walls, vehicle roofs, tall buildings, mountains, and other obstructions can block line of sight to GPS satellites. When this occurs, your device will automatically use Wi-Fi or cellular networks to determine your position until the GPS satellites are visible again.
    -Griff W. 

  • Ipad2 (update ios8.1) many time freeze in all apps.

    I can open app,but freeze. I must shut down for fix it. Now i must shut down 5-10 times per day. Do you have any solution for my ipad2? Can i back to ios7?

    Hi MrKritz,
    Welcome to the Apple Support Communities!
    If you are having issues with applications making your iPhone become unresponsive, please read over and follow the troubleshooting steps located in the attached article.
    iOS: Not responding or does not turn on - Apple Support
    Best regards,
    Joe

  • IPad2 Updated and now iTunes and plug icon

    After being prompted for a few days for the update, I followed the usual protocol of agreeing, etc. and clicking update.  Screen went dark.  After about 15 minutes the apple icon came back, then and iTunes icon along with a plug icon next to it.  I have no specs as I didn't write it down before I started.  After 2 years I guess I am complacent and expected it to work.
    I've tried hard reset a few times.  Plugged it in to my computer for iTunes and it won't update but comes up in recovery mode and won't go further without restoring it back.
    Important stuff is backed up but 2 years of getting it "just right" I am hoping I don't really have to do this.
    Any thoughts, opinions.  Or am I just going to have to push that restore button?
    Thanks.

    you have to restore via itunes - no other options sorry
    peace, Clyde

  • IPad2 update past iOS 5.1.1

    I cannot get my iPad 2 to update past iOS 5.1.1. Is this the latest version available?

    Sorry, but that is an iPad 1, and thus can not be upgraded beyond 5.1.1
    Introduced     January 2010
    Discontinued     March 2011
    Model Identifier     iPad1,1
    Model Number     A1219
    EMC     2311
    Order Number     MB292LL/A (16 GB) MB293LL/A (32 GB) MB294LL/A (64 GB)

  • No more MacBook. iPhone/ipad2 updates/syncing

    If I get rid of my very old MacBook, how can I do this without losing all my music/books? Can I sync with a new computer?

    The App store, for all developers, closes this time of year. That's why you don't see any updates available. If the developers don't get their updates in before Apple shuts things down for the holidays, they have to wait until things return to normal. All developers get plenty of warning before things shut down.

  • HT201412 ipad2  updated overnight. Now i cannot get it to "activate".

    Help me using itunes.
    I hooked up the ipad2 to a mac computer and now I am lost...
    Need to activate the ipad2!
    Thanks.
    gw

    Hi n9921 x,
    I'm sorry to hear you are having issues with your new iPad. I also apologize, I'm a bit unclear on the exact nature of what you are describing or exactly what you are seeing. If you have a cellular enabled iPad and are having issues activating the cellular data connection, you may find the information and steps outlined in the following article helpful (it is aimed at iPhones, but should apply to cellular iPads as well):
    Get help activating your iPhone - Apple Support
    On the other hand, if you are being prompted for an Apple ID and password, the iPad may be Activation Locked, as described in this article:
    Find My iPhone Activation Lock - Apple Support
    Regards,
    - Brenden

Maybe you are looking for

  • Batch Determination at Storage location Level

    Dear All, I have one question on batches when I am entering stock against batches in Outbound Delivery Note (as batch split ) the batch determining the storage location is different not the one which it belongs to, I need the batch stock should be de

  • Why Does Installing The JDK On A 64bit OS Install 3 Copys of the JRE???

    I am running Windows 7 Home Premium 64bit version. I recently installed the JDK and realized that along with it 3 copys of the JRE were installed. This is a brand new computer I am running that I just brought home a few days ago so I know there not o

  • Vol_init failed       so i cant access media.

    Hi I'm running Sol 2.8 on a sparc SUNW,Sun-Blade-1000 and having problem mounting the cdrom. I tried to start vold but I'm seeing that /var/adm/messages is logging "vol_init failed" and "Can't communicate with kernel". I've seen similar error in the

  • Slow performance after iOS 7.1 upgrade, please help.

    My kids have iPad Airs.  One of them has a serious slow down in performance after upgrading to iOS 7.1.  The others work fine.  It is so slow that it is unusable.  When you type a single character, it takes several seconds to show up on the screen. 

  • Project crashes when trying to save

    We have experienced this behavior occasionally, but when it happens it's very frustrating. MSP crashes when saving a project to the server. there is no recovery and all changes done till that save are gone. this happens when we work with the client.