HT5654 phone in not activate after software update

phone in not activate after software update

Activation issues are typically the result of a device that has been hacked or jailbroken.  If that is the case, no support can be provided here.

Similar Messages

  • Iphone could not activate after software update

    iphone could not activate after software update (iSO5). it reads, on itunes, "there is no sim card on the iphone", even though there is one in the phone. i tried taking the sim out and re-inserting it, but the same problem still repeats. Anyone to help?

    Is there a sim in the iPhone?
    Has the iPhone been jailbroken or modified to work with other
    than the original wireless provider?
    If you can get that far, what does it say when you look at
    Settings=>General=>About=>Carrier?

  • Why is that my phone could not activate after updating a software?

    why is that my phone could not activate after updating a software?

    givenfor wrote:
    why is that my phone could not activate after updating a software?
    Since we don't have a crystal ball, its very hard for anyone to tell you why it might not activate if you don't provide details...
    What happens when you try?  What error message do you get?  Was the phone previously jailbroken or unlocked?

  • My phone is still disabled after software update and i cannot seem to reset my passcode someone help me

    my phone is still disabled after software update and i cannot seem to reset my passcode someone please help

    Does the Ipod see the network?
    It sure sound like the drop cause some other internal damage like breaking/loosening the connection to the  antenna. See:
    http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/3

  • My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201412 phone will not activate after restore

    My iphone 3gs will not activate after restore.

    That's almost always because the phone was hacked or jailbroken to unlock it from the original carrier.
    Where EXACTLY did you get the phone? Did you or a previous owner ever get it "unlocked" by someone other than the carrier it was originally locked to?

  • Macbook battery not charging after software update

    I was doing some work on my MacBook (4,1) with the charger plugged in and the lid closed (I was using my TV as a montior. There was a software update for itunes and a few others and now it's saying the battery needs to be serviced!
    The battery currently has 62% charge, i've not disconnected the charger once in teh few hours I was working. Anyone got any ideas as to what could cause this?
    The change to needing the battery serviced was not straight after the update, I don't think so anyway. I've not really noticed it until I went to pick up my MacBook and it all started to go haywire. It because unresponsive, black screen etc.
    I've tried to reset the SMC and i've checked the charge cycyles too and it's about 250 so there's no problem there. It's just annoying as this is the 3rd battery i've had for this macbook, the other two being replaced under warranty. Now the warranty is up and it needs chaging for a 4th time!

    Hi imi_uk,
    I see you marked this question as "solved" is that the case?
    If not, are you able to startup your computer via "safe boot" by holding the SHIFT key on startup (until the Apple logo appears and the gear appears below it).
    The next step, would also be to boot off the system restore disc that came with your computer and attempt to repair the volume (the internal HD) via the the built-in disc utility.

  • HT4623 my phone does not have the software update option

    my ipone 4 does not have the software update option?

    Do the following:
    Open the App Store app on your phone and update all your apps so the will work with the new iOS.
    Connect your phone to your computer and open iTunes.  If prompted that there is an update available, decline.
    Sync with iTunes to create a new backup and transfer any purchases from your phone to your iTunes library.
    Import your photos to your computer for safekeeping as explained here: http://support.apple.com/kb/HT4083.
    Go back to iTunes, click on the name of your phone on the left side, go to the Summary tab to the right and click on Check for Update (or Update).
    This will download iOS to your computer (which may take a while), then install the update on your phone.  Pay attention to the progress information in iTunes on the top of the screen, and any information that appears on your phone during this process to be sure you don't disconnect your phone prematurely.

  • Phone not working after software update!!

    i dont know if anyone could help me but i recently done a software update for my blackberry torch 9800 and after it upddated it hasnt been the same the screen isnt the same some of my icons are missing and nothing is right and i done a software downgrade to see if that would help and it didnt make any difference and i have removed the battery several times but it does not seem to be working and i do not know what to do! so if there someone who might be able to help me i would be very greatful.

    Hi and Welcome to the Community!
    Please refer to this official download portal as you proceed. It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
    http://us.blackberry.com/support/downloads/download_sites.jsp
    From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. After installing the OS package to your PC, please remeber to delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
    You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
    You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
    Load your OS "bare bones"...if anything is optional, do not install it.
    If the behavior presents immediately, then try a different OS with step 1
    If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
    Add one thing -- no matter how tempting, just one.
    If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
    Repeat steps 4 and 5 until all things are loaded or the behavior presents
    When the behavior presents, you know the culprit...the last thing you loaded.
    If the behavior does not re-present, then you know that either step 1 or 2 cured it.
    If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
    You may also need the use of these tricks:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I can not get the phone to turn on after software update iphone 4s. it is showing the itunes and a cable, what should i do?

    I cannot getr my phone to turn on after a software update. it is only showing the itunes icon and a cable. What should I do /

    Hi patche,
    I would recommend you to connect the iPhone to iTunes and follow the steps provided,
    Once you connect the iPhone to iTunes you will be able to Set-up your iPhone on the iTunes itself with the available options.
    HOPE THIS RESOLVES THE ISSUE.
    Regards,
    Abhishek D.K

  • HT5654 my phone isn't working after software update, what happened??

    So I updated my Iphone 4s with the new 7.1.1 software update and now my phone is stuck with the screen showing the itunes logo and under it an arrow pointing at the logo with the power cord underneath. Itunes store says that my phone is currently in recovery mode. ***? I wasn't trying to recover the phone just update the freakin software!!! Getting real close to getting my Samsung S5 now!!

    iPhoto 9.5 is free if you are an iPhoto '11 user. To check this, open a Finder window and select Applications in the sidebar. Then, right-click iPhoto, select Get Info and see the iPhoto version. If it's 9.x.x, you are running iPhoto '11.
    If you are running iPhoto '11. switch the Mac OS X language to English in System Preferences > Language & Region, and restart. If not, you have to buy iPhoto '11 in the Mac App Store

  • Macbook pro (snow leopard) will not boot after software update

    I helped my mom buy a Macbook Pro for herself for Christmas. Today, I connected it to her old eMac and used the migration assistant to transfer files over. It was unable to estimate migration time on the only user (after 45 minutes) so I didn't migrate the user. Then I tried to pair her macbook to her new bluetooth keyboard, but no magic happened, so I tried to use the bluetooth setup assistant, which crashed. So I ran a software update, hoping that this would fix whatever the bluetooth problem is. Despite having updated on the 23rd, there were 4 updates. None seemed applicable but I installed them anyway. Now the computer won't boot at all.
    Software update said that I had to restart for the updates to take effect, so I restarted. The harddrive went whirrrrrr and the grey screen with the apple logo and the spinning circle displayed. Then the harddrive stopped going whirrrr and 10 minutes later, I started looking on the support site for what to do. I found this:
    http://discussions.apple.com/thread.jspa?messageID=10564149&#10564149
    Per the instructions in the last post, I fscked the drive (although -f, in accordance with the fsck help). This found no problems. The next suggestion was to boot from the OSX install disk. Only one problem-- there was a disk in the disk drive when the problem occurred and the disk eject button apparently only works while in the gui. I can't install from disk if I can't get the existing disk out of the drive.
    So, any other ideas on what I can do to get this machine to boot?
    Message was edited by: jenlarkin

    Hi Jen:
    Since it's new, you're entitled to 90 days of phone support (3 years if you buy AppleCare). It sounds to me like you may have some hardware issue(s) going on - you should not have the sorts of issues you're having with a new Mac. Apple will probably be much better and faster about getting you fixed than this board may be able to if that is the case.

  • Nokia E5 not starting after software update

    Hi 
    I today updated my software through wifi. after download, it tried to restart the phone and didnt restart at all. Its completely dead now. 
    Please help.
    Regards
    Lalit

    Hi lalit20,
    Welcome to Nokia Discussions.
    If your device does no longer switch on after updating through WiFi, try connecting the phone to Nokia Suite and see if you can reinstall the current software. You can do this by clicking on the green arrow in Nokia Suite, the option to reinstall the current software will be displayed in blue in the bottom of your screen.
    If the device does not respond after connecting it to Nokia Suite or you're not able to reinstall the software, please visit a Nokia Care Point where the phone can get looked at and sent for repair if necessary. 
    Let me know how you get on.
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

  • Scanner samsung scx-4300 does not work after software update v 2.3

    hi everybody,
    i just noticed that after i run software update on my mac mini and install samsung printer software update v2.3
    I'm no longer able to scan from my Samsung SCX-4300
    on macbook pro i noticed the software update has not been installed, and i can still scan without any problem
    is there a way to uninstall the software update?
    thanks.

    What's the correct way to uninstall SamsungPrinterSoftwareUpdate v.2.3
    If  I delete the following:
    - Samsung folder in /Libraries/Printers/
    - Samsung Scanner.app in /Library/Image Capture/Devices
    Will it remove samsung driver for printer and scanner?
    If yes, then I can reinstall SamsungPrinterSoftwareUpdate v2.2 (found in on the internet from google search)
    note: confirmed the problem is with SamsungPrinterSoftwareUpdate v2.3

  • Safari and Mail will not open after software update

    After doing the monthly software update yesterday, my Mail and Safari programs will not open. I click on the icon in the dock or in the Applications folder and I get nothing. The icon in the dock jumps, but nothing opens. I've read several other discussions and tried dragging several files out of the library, such as plist files and history, etc., but they still won't open. The software update only updated iTunes and iPhoto and included the most recent security update. I have not tried to reload Safari. If I do that (and it works), what do I need to do for Mail? Will I lose all my emails? Can someone tell me what I can do to get both programs back working properly? Thanks!

    Another approach is to reapply the 10.3.9 combined update. "Repair permissions" via Disk Utility in your Utilities folder.
    As far as your e-mail's are concerned, the database files are maintained in your User account>Library>Mail folder. It's very important you backup this folder periodically to external media regardless of circumstances to preclude losing your e-mails in the event of file corruption.
    Best maintenance strategy is a full backup of your HD on a bootable external (firewire) hard drive. Makes life a lot easier in the event you need to revert your HD to its state prior to an System Update gone bad.

Maybe you are looking for

  • Ntopng compilation and installation on Windows Server 2008 R2

    Hi All, need some help on how to compile ntopng source to windows 64-bit OS. I tried to look for some good solutions but nothing. Cheers, JK

  • Adobe Reader X won't open pdfs in IE8

    I've just updated my installation of Adobe Reader X to the latest version, 10.01. Now it won't open web hosted pdfs in Internet Explorer (the previous version did). When I try and open a pdf from a web host I'm told that the file can't be open with t

  • Ipod video and USB 1.0...

    I purchased a 60Gb Ipod as a gift and I have come to find out that my daughter's IMac has USB 1.0. Can she use it? An Apple store person said she would have to buy a new computer. The tech specs on the Apple site say 2.0 Recommended but it does not s

  • [SOLVED] Incorrect time displayed in my system

    Hey Archers, I have trouble correct time being displayed in my system. My BIOS time is: May 18 2012 08:39:21 PM IST Date command displays Sat May 19 02:09:59 IST 2012 Clearly the time displayed by date command is localtime+05:30 (Asia/Kolkata), when

  • How to simplify this query into simple sql select stmt

    Hi, Please simplify this query I want to convert this query into single select statement. Is it possible? If uarserq_choice_ind is not null then Select ubbwbst_cust_code From ubbwbst,utrchoi Where utrchoi_prop_code=ubbwbst_cancel_prod Else Select max