HT5655 The new Flash installer from Adobe still isn't working, right?

The new Flash installer from Adobe still isn't working, right? We get the "installation failed" messages, and we're awaiting Adobe's follow-up on it?

AdmrlLocke wrote:
Adobe Acrobat 8 has two problems on my iMac. The lesser problem comes when I go into the Print command and click "Preview." I get a message that says that Preview isn't supported.
Preview is not supported because building a preview of a print job under OS X involves creating a .PDF file. You already have a .PDF file open if you're using Acrobat, so there's no point creating a new one.
The greater problem just cropped up as I was writing about my problems with Quicktime and Real Player: Acrobat tried to update itself and then gave me a message that says, "Cannot overwrite file /Users/(myname)/Documents/Update5/AdobeUpdater/acrobat8pro-en_US/AUMProduct.dmg .
That's not a problem with Acrobat. The system is saying that you have a file named AUMProduct.dmg in place already, and you don't have permission to update it. You need to change the permissions on that file so that you can update it, or to use an account which has update permission. Or it might just be locked and you need to unlock it. Locate it using the Finder (you have the complete path to the file listed above) and see what permissions are on the file and whether or not it is locked.
You might also just put the entire Update5 folder into the Trash and try updating again.
The file maybe be locked or you may not have sufficient access rights. Please make sure you have write access to this file." Can anyone help? Thanks.

Similar Messages

  • TS1398 My iphone 4S has been updated to the newest software and isn't detecting internet, although sometimes it connects for a few seconds and then disappears again. I have tried everything it has said on the internet about this and it still isn't working

    My iphone 4S has been updated to the newest software and isn't detecting internet, although sometimes it connects for a few seconds and then disappears again. I have tried everything it has said on the internet about this and it still isn't working.

    Ok I think it's a problem with my router. I went to my cousin's house and the Wi-Fi worked there perfectly. I was even able to download many apps. So I guess my router probably can't take in more connections. Oh well thanks anyway.

  • Firefox29, on a new win7 computer which has never had ff installed, will not install the latest flash plugin from adobe.

    I promise to refrain from venting my disgust :-) but when FF 9 blew up the entire web. I had all kinds of issues so I did things like Bill Gates taught us to do. I re-installed windows 7, brand new, formatted HD and all. The very first thing I did was open IE to download FF29 from the mozilla site and it installed. I went to pages I know have fits with flash on purpose, www.nydailynews.com, for instance and got the message that no flash was installed, do I want to install it? Well, yes, I have brand new FF on a brand new computer, so to ahead. Did the usual, installed Flash, shut down, and even rebooted the computer, and golly gee, the web pages tell me I have no flash installed. Its in IE, and of course chrome, and it appears in the installed program control panel, but I can't use flash with FF 29.
    I wiped the hard drive and reinstalled win 7, then installed ff 28. Went to adobe and installed their latest flash version, and still no flash in any version of firefox. I also checked the option to never update, but when I rebooted an opend FF29, it miraculously turned into FF29, and of course still does not work with the flash plugin.
    I think firefox has had a world of trouble with Adobe Flash for over a year and have hoped for a solution. Basically a browser that cannot run Flash media is totally useless. I wonder why this problem was no addressed and corrected, when instead all the the resources were put into raping my computer and forcing FF29 onto it?
    I am not a cry baby, who wants to complain, but will you please fix this issue so I don't have to abandon my favorite browser.. I don't enjoy Chrome, and IE is just not an option for me.
    Before you make any moreoverhauls on the UI, could you fix the problems with flash. I find it a little condescending to tell a 25 year user of computers to make sure " you have the latest versions" when in fact I have a brand new install of windows and the very latest from Adobe and Mozilla and they do no wok together, even when I down grade to FF 28, which as I told you, automatically upgrades to FF 29 each time I boot up.
    Please help. IF installing the latest Adobe onto a brand new hard drive and install of windows 7 fails, what do you suggest, as the usual " version issue" cannot apply here.
    FWIW, I have vista on my laptop with the same problems, the same reinstalls and the same guaranteed latest versions. Since the hd is formtted, there cannot be an residual FF dlls hanging around or in the registry.
    I have always seen open source as the way to the future, since the first PC arrived, but its looking like a bad idea.
    If you want to build a firefox that works, I will pay for it, so long as I can get help when things break. Browsers are huge in the web, so paying for reliable performance seems like a fair thing to do.
    I am sorry, but I am frustrated at the lack of progress towards a solution and really do not wish to be told to see if I am using the latest versions. I have taken every step possible and gone all the way to a brand new machine and FF does not work with flash reliably.
    Help? Please?
    john
    <sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>

    adobe test page says it is installed. but I said, some pages I visit say I don't have it installed.
    I use prefbar ( I delete it and reinstall to make sure its not an issue) usually because it lets me turn off flash and avoid the crashing and locking up but when I check the flash block on prefbar, it says " plugin is not loaded"
    I posted from the machine that does not work, but it does not work on my Vista Laptop, or my daughter's computer either. In all cases, I wiped the drives and reinstalled the OS and went directly to Firefox for 29 and to adobe for their latest.
    Flash IS installed on my machine... It works in IE, and Chrome, but firefox 29 does not install the flash plugin, even tho the installer says all is well
    The reason I went totally clean is to make sure there was no process blocking it or if Java was creating the issue as well. The reality is, I started with a brand new computer, three times, and Flash will not load into Firefox 29 in any case
    I have started clean many times now and backed up and installed ff 28. I had no problem with the flash plugin using ff28, . I would have stayed there, but when shut down ff 28 and opened it later, it "magically downgraded to version 29" and i do mean " downgraded -( even tho I had gone into options and said do not install updates.
    I am grateful for your attention. I find that web browsers are very important anymore, an a non functional one makes the web a waste. I mentioned www.nydailynews.com and would really not want to make a long list of every page that demands a flash plugin, for they are legion that I don't have, mostly because when the page wants flash, FF locks up. Its will not even let me copy the URL to try and make a list, but the browser is totally locked up and I have to kill the process I get the message I have been getting for about a year that the shockwave plugin has stopped working. There is no shockwave on my computer.
    I know it looks like I have two different problems as the plugin does not load, but for instance, when I got it worrking in FF28, it loaded but constantly crashed an locked up the browser with the shockwave message, even tho I never install shockwave any time
    Frustration is the word for the day, or the week :-)
    Thanks much
    Kind regards,
    John

  • No error occurs during Flash installation, but it still doesn't work

    I have installed the latest version of Flash using the installer on the Adobe website and no errors occur during installation.  However, when installation is complete, I still can't use websites that require Flash (I am prompted to go install Flash).  Even the troubleshooter on the Adobe site says that I don't have Flash installed when I check it in the first step.  I am running Windows 7 (64-bit) and Internet Explorer 11 (I downloaded and tried Firefox and got the same results).  Please help.  Thanks.

    "User-Agent Strings"
    That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
    Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
    The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
    Microsoft has no plans to "fix" the mess thay've created because they think it's a great idea to block you out of the websites you visit.
    They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • I just got the new ipod 5 and my mic isn't working

    My mom recently bought me this iPod 5 and last night the mic stopped working, I did everything that I saw on here to do, but I never dropped it so I'm sure it's not a hardware problem. All I can hear is static! Please help me.

    - Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
    - Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded.
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. The mics do die on their own infrequenlty
    Apple Retail Store - Genius Bar                                      

  • Flash installs successfully but still doesn't work

    I'm getting very agitated at my cpu. I go to a site that
    requires flash. I'm directed to adobe to install it. Installation
    is successful...always. I have tried closing my browser and
    reopening and it still says I need to install flash to view that
    site. I can go back to Adobe, install it again, reboot my cpu and
    it still tells me the same thing. I have done all of the
    troubleshooting tips and nothing helps. The only thing I can think
    is that I have the latest version of Windows Internet Explorer 7
    installed and maybe Flash isn't synced with it yet. Is there anyone
    else out there with this type of problem?

    I found another forum that seems to have a solution.
    http://forums.cnet.com/5208-6620_102-0.html?forumID=14&threadID=213694&start=15
    These guys have Firefox installed and manually moved the
    plugin and then click on it to run it for IE7. I wasn't quite ready
    to install Firefox to get IE working... unless that's Mr. Gate's
    suggestion. In any case, it's worth reading. Basically, IE7 with
    Flash 8 or 9 can be problematic.

  • HT204370 I just bought GOT season 1, and it says i need the quicktime player, which I then installed, but it still isn't working, what should I do?

    I've already tried uninstalling and then installing the quick time again, but it still isn't working. I have an ASUS laptop it that helps.

    I think this is a known problem with Lion and some installs of Logic, I've seen it mentioned before.
    Contact Apple.
    Here is a related thread.
    https://discussions.apple.com/thread/3218471?start=0&tstart=0

  • Do Not Disturb still isn't working!

    Does anyone know why the iPhones do not disturb feature still isn't working. My phone still rings during my set schedule as well as when I set it to do not disturb.

    Try resetting your iPhone.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.

  • My firefox deleted the existing adobe flash player 10.3.183.7 BUT I'm unable to download the new flash drive 10.3.183.10. Can I go back to the old flash player (10.3.183.7)

    I am running Windows XP.
    my firefox deleted the existing adobe flash player 10.3.183.7 BUT I'm unable to download the new flash drive 10.3.183.10. Now I can't play anything. Can I go back to the old flash player (10.3.183.7)?''

    There is something wrong with the download that Adobe is pointing too. You can get the working download here:
    http://fpdownload.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_10.exe
    That solved my problem immediately.
    I got this info from this post on the Adobe forum:
    http://forums.adobe.com/message/3947097#3947097
    Flash Download Problems
    WindowsXP SP3
    Mozilla/5.0 (Windows NT 5.1; rv:6.0.2) Gecko/20110902 SeaMonkey/2.3.3
    (Note well: Internally, SeaMonkey 2.3.3 is the same as Firefox 6.0.2. They both use the same Gecko 6.0.2 for rendering Web pages, interfacing with the Internet, downloading, etc.) They differ only in the user interface (menus, buttons, etc).
    I see two problems when trying to download a new version of Flash Player from http://get.adobe.com/flashplayer/. .
    1. Your Web server is sniffing for my browser. I select the "Download now" button, and I get the same page all over again. The navigation is looping. If I spoof Firefox 6.0.2, however, I do get a download. This means you are sniffing for "Firefox" when you should be sniffing for "Gecko".
    2. While spoofing Firefox, the download gives me install_flashplayer10_chrd_aih.exe, which is not the installer for Flash Player 10.3.183.10. Instead, it is some kind of helper. To get the correct installer file, I had to search my archives to find the URI http://fpdownload.macromedia.com/get/flashplayer/current/licensing/win /install_flash_player_10.exe.
    Both of these problems were previously cited in this forum at http://forums.adobe.com/message/3885371. Neither problem has been fixed.

  • The new Flash update installer stops at 95% and freezes.

    The new Flash update installer stops at 95% and freezes. I have followed all of the the uninstall procedures, made sure there were no files in the library/internet plugins folder and opened the installer folder and used the sub folder install nothing works. I get the blocked plugin message from video players telling me download the update. I've spent two days now trying everything.

    Try the offline installer(s)
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Flash Player for Mac OS X

  • Installation of the new flash player 11

    hi i have tryed lot of times now to install the new flash player and its just not working i have taken it all off the laptop and put all back on again still nothing i have WINDOWS 7 and  COMPAC LAPTOP can anyone help me

    hi ever time i try to view any video it does nothing and tells me i need to install the Adobe Flash Player. all i get is a black screen - this is a e.g of what i get and yes i use Internet explorer. thank you so much for helping me whit this
      Please wait, your game is loading...

  • Adobe Flash Player not working. Installen latest version. Get the following: "This website would like to run the following addon: Adobe Flash Player from Adobe System Incorporated." Then asking me to allow it for current or all websites. It doesn´t matter

    Adobe Flash Player not working. Installen latest version. Get the following: "This website would like to run the following addon: Adobe Flash Player from Adobe System Incorporated." Then asking me to allow it for current or all websites. It doesn´t matter how i do this. The pop-up question returns EVERY time. What do i do to solve this issue???

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/message/5249945#5249945

  • I have installed the latest version of Adobe flash player and it still does not work what did i do

    I have installed the latest version of Adobe flash player and it still is not working and every time I enable shockwave the internet does not respond

    Clear your cache Tools > Options > Advanced > Network > clear now
    Right-click on video > Settings > turn off Hardware Acceleration

  • I cannot receive messages from iphones since I got a new android device. did the change apple I'd password and whatnot...it still isn't working. what do I do?

    I cannot receive messages from iphones since I got a new android device. did the change apple I'd password and whatnot...it still isn't working. what do I do?

    Lets take first issue first: Apple does not charge a customer to 'keep' iPad access. That does not happen at apple. If you were billed and charged that amount of money from someone you were speaking to over the phone, you were not talking with Apple support. If you need to speak with apple support you are free to call them at 800MYAPPLE and they will talk to you for no more money than 19.00/ support event.
    Please read this article to asssit with imessage and factime troubleshooting.
    http://support.apple.com/kb/TS4268
    I'm sorry you have this happen to you - that being charged fraudulently for a non rendered service.
    Good luck to you Friend.

  • Just installed the new LR upgrade from cloud but won't open only flashes, any ideas?

    Just installed the new LR upgrade from the cloud and it will not open, only shows flash for nano second, any thoughts?

    SOLUTION FOUND:
    Click on your CC icon.
    Click on the gear icon.
    Click on Preferences.
    Sign out of CC.
    Sign back in.
    Don't click on "Quit."
    I had been QUITTING CC and relaunching. Try signing out.

Maybe you are looking for

  • Split screen static

    ijust picked up a new imca 27" to replace my powerbook pro. i have always used a lg monitor on the left side at 270 degrees for design. i was told i needed a new adapter for vga to mini display for the thunderbolt connection. its works but only some

  • ALE change pointer error - master data

    Hi friends, While loading master data (customer,material and order number) all delta,we faced the error "ALE change pointers are not set correctly". In the discussions posted earlier,it was said that the change pointer in BD61 activation would solve

  • Expressions in External Tool Arguments

    I want to be able to get the shallowest directory when specifying arguments for an External Tool. I see there is a ${file.path} macro, which gives me something like the following: C:\Development\SQL\localrepo\fea\adhoc\mercr Is there a supported way

  • How to setup and load hierarchies in BW?

    Dear BW gurus, We have vendor hierarchy in ECC table LFMH.In BW when i try to load this hierarchy for 0VENDOR using 0VENDOR_LKLS_HIER datasource, i do not see the hierarchy that i need from the ECC (in the "available hierarchies in OLTP" option in th

  • Logging/debug  CMP generated SQL in WLS 7

    Hi, I wish to log the sql generated by weblogic for the CMP entities when they are called within the application. Is there any mechanism to view/log the sql statements generate in weblogic 7.0. I have tried the following entry in the config.xml but i