HT5678 managing website settings

When I try to manage website settings, I go to preferences and I get "security and Privacy" and I don't get an opportunity to manage the website settings there. There is no where to go to find it. I am trying to clear the Adobe block and I am current with it. I found a discussion on this subject in the NYTimes but I couldn't complete the process on my computer. I have OSX 10.6.3 Thank you for your help.

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Similar Messages

  • " plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

    Hi,
    Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
    Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
    Thanks,
    Shyam

    Hi Linc,
    Thank you for your response. Here is the screenshot of the warning that I am talking about.
    Here is what I do:
    1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
    2. Click Security Tab and click Manage WebSite Settings
    3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
    4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
    I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
    Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
    Thanks again,
    Shyam

  • Silverlight app does not show up in "manage website settings" list in security tab in safari prefences even on admin account.

    As title says, the silverlight app doesn't show up in the "manage website settings".
    Account is admin.

    As title says, the silverlight app doesn't show up in the "manage website settings".
    Account is admin.

  • Error while deploying application using enterprise manager website and dcmctl

    Hi,
    I am trying to deploy a huge ear file using enterprise manager website of Oracle 9iAs Rel 2.
    The deployment fails with the following error.
    Deployment failed: Nested exception Root Cause: null; nested exception is: java.lang.OutOfMemoryError. null; nested exception is: java.lang.OutOfMemoryError
    We are able to deploy the same ear file using stand-alone container. We are planning for deployment in few days to go it live. Pls suggest what could be the problem.
    Hardware Used:-
    DellServer Intel P3 dual processor 1.2GHz
    1GB RAM
    2GB virtual memory,
    40GB free hard-drive.
    Apart from 9ias enterprise edition, this system has Oracle database also on it. But the database is not being used at all by anyone.
    No other software is installed on the system
    Software:-
    Windows 2000 Server sp2
    Oracle 9ias Release 2 Enterprise Edition (Installed J2EE and Webcache)
    Oracle 8i Database 8.1.6.0.0
    Size of application:-
    130 EJBs (107 CMP + remaining Session Beans)
    1700 JSPs
    3 servlets
    Packaged properly into jar,war,ear structure.
    the size of ear file is about 13MB.
    I tried using dcmctl but still got the following error.
    Oracle 8i database is running but noone is using it except that this application uses it.
    Pls help
    D:\oraJ2EE\dcm\bin>dcmctl deployapplication -f d:\oraJ2ee\j2ee\elink\applications\advecto.ear -
    a myapp
    ADMN-300075
    D:\oraJ2EE\dcm\bin>dcmctl getError -v -d
    ADMN-300075
    Nested exception
    Base Exception:
    java.rmi.RemoteException:null; nested exception is:
    java.lang.OutOfMemoryError
    Nested exception
    Root Cause: null; nested exception is:
    java.lang.OutOfMemoryError
    java.rmi.RemoteException: null; nested exception is:
    java.lang.OutOfMemoryError
    java.lang.OutOfMemoryError
    <<no stack trace available>>
    Are there any mandatory patches to be applied after installing 9ias Rel2?
    Thanks
    Srinath

    Try to fragment the 'ear' in less than 64k blocks or don't transmit as long raw.
    Please let me know if this works.

  • Error while trying to deploy the application using Enterprise manager website

    Hi,
    I am trying to deploy a huge ear file using enterprise manager website of Oracle 9iAs Rel 2.
    The deployment fails with the following error.
    Deployment failed: Nested exception Root Cause: null; nested exception is: java.lang.OutOfMemoryError. null; nested exception is: java.lang.OutOfMemoryError
    We are able to deploy the same ear file using stand-alone container.
    We are planning for deployment in few days to go it live.
    Pls suggest what could be the problem.
    Hardware Used:-
    DellServer Intel P3 dual processor 1.2GHz
    1GB RAM
    2GB virtual memory,
    40GB free hard-drive.
    Apart from 9ias enterprise edition, this system has Oracle database also on it. But the database is not being used at all by anyone.
    No other software is installed on the system
    Software:-
    Windows 2000 Server sp2
    Oracle 9ias Release 2 Enterprise Edition (Installed J2EE and Webcache)
    Oracle 8i Database 8.1.6.0.0
    Size of application:-
    130 EJBs (107 CMP + remaining Session Beans)
    1700 JSPs
    3 servlets
    Packaged properly into jar,war,ear structure.
    the size of ear file is about 13MB.
    Thanks
    Srinath

    Hi,
    I tried using dcmctl but still got the following error.
    Oracle 8i database is running but noone is using it except that this application uses it.
    Pls help
    D:\oraJ2EE\dcm\bin>dcmctl deployapplication -f d:\oraJ2ee\j2ee\elink\applications\advecto.ear -
    a myapp
    ADMN-300075
    D:\oraJ2EE\dcm\bin>dcmctl getError -v -d
    ADMN-300075
    Nested exception
    Base Exception:
    java.rmi.RemoteException:null; nested exception is:
    java.lang.OutOfMemoryError
    Nested exception
    Root Cause: null; nested exception is:
    java.lang.OutOfMemoryError
    java.rmi.RemoteException: null; nested exception is:
    java.lang.OutOfMemoryError
    java.lang.OutOfMemoryError
    <<no stack trace available>>
    Thanks
    Srinath

  • Manage 3D Settings

    STEP 2.
    Run nVidia control panel and go to 3D settings. Click the Manage 3D settings option and at the Program Settings tab click Add.
    Locate Premiere.exe and click it.
    Below, at the Multi-Display/Mixed-GPU Acceleration option, click Compatibility Performance Mode and click Apply.
    Does anyone know that the above step is supposed to accomplish.  I forgot to do it with my 460, but all seems to be working fine anyway.

    me too

  • Snow Leopard Server - Managed Dock Settings

    Hello Everyone,
    In our environment, we are running Snow Leopard Server 10.6.7 with a mix of 10.5 and 10.6 clients. We are managing settings via Open Directory. We have a computer group policy configured to manage our dock policy settings among a few others. Within WGM, our dock policy settings are setup to be managed "once." When the policy was configured, our Mac administrator put together a customized default dock arrangement with the most commonly utilized applications included in our base image allowing our end users to start with a small clean dock arrangement and add applications/folders as desired.
    Regrettably, last week I inadvertently made a change within WGM's managed dock settings in our default production policy. The following morning, several end users logged on to find that their dock customizations had been discarded and replaced with the default setup. To minimize the impacted users, I enabled "merge with user's dock" to avoid further loss of dock customizations. Looking forward, as we roll out new hardware with new images to our existing users, I would like to start with the same scaled back dock with the commonly utilized applications included in our base image. The problem with enabling "merge with user's dock" is that the default set of Mac OS X icons is included causing the dock to be cluttered.
    Is there anyway to only apply managed dock preferences if there is not a local profile on the machine the user is logging into? Any other thoughts for circumnavigating the mess I created?
    Thanks!

    Enabling "merge with user's dock" created problems of its own by introducing duplicate icons for some users. In the end, I unchecked it. Unfortunately, all users are going to receive the default dock arrangement and have to re-customize their dock preferences as desired.

  • 'System Error' when trying to save Form Manager Registry Settings

    Hi,
    trying to save changes made in the form manager registry settings [Home > Services > Adobe LiveCycle Form Manager > Registry Settings (http://localhost:8080/FormManagerAdmin/registry-cfg-load)], I get an error, which reads:
    > System Error
    >
    The request could not be processed. Please retry the operation. If the problem persists, please contact your system administrator.
    Has anyone had this error as well?
    The system runs fine apart from the jboss log files being crammed with the well-known and pretty annoying
    SpyJMSException.
    Does anyone have an idea how to apply changes to the form manager registry settings, if the web ui does not work? Where are the 'form manager registry settings' being stored? Maybe I succeed in changing the settings manually at least without having to re-install Livecycle...
    Regards,
    Steve

    We are using JBoss 3.2.5.
    Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
    Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

  • Want to buy something Ap Store and I came to buy I have the answers to the questions of safety, now I forgot them, I went to MY ACCOUNT MANAGER website and there was no reset was some other reset but it asked for the answers to Secure

    Want to buy something Ap Store and I came to buy I have the answers to the questions of safety, now I forgot them, I went to MY ACCOUNT MANAGER website and there was no reset was some other reset but it asked for the answers to Secure

    Morning AndreD86,
    Thanks for using Apple Support Communities.
    These articles explain exactly what is backed up by using their method.
    iTunes: About iOS backups
    http://support.apple.com/kb/ht4946
    and
    iCloud: Backup and restore overview
    http://support.apple.com/kb/ht4859
    Also we want to double-click the Home button and swipe the Task Bar to the right.
    Then make sure the button on the far left of Task Bar is not muted.
    Best of luck,
    Mario

  • Enterprise Manager Website

    I could not access the enterprise manager website after installation. In fact it asks for username & password. When I provide the password with user name isa_admin, it says 401 unauthorised. Can any one guess the possible reasons. I am supplying the correct password which I supplied during installation.

    Hi 409450
    As Rajesh wrote you the correct user is IAS_ADMIN.
    In case that you can not enter to OEM web site you can do this :
    Edit your jazn-data.xml file located at %ORACLE_HOME%\sysman\j2ee\config. Remove the entire <credentials> line containing a whole bunch of numbers and letters (that moake no sense) under the ias_admin <name>. Save.
    At a command prompt run:
    %ORACLE_HOME%\bin\emctl set password reset <...and your new password>
    And then you can go to http://<hostname>:1810 and enter your new password.
    backup before that file that you are going to edit.
    Joel Pérez
    http://otn.oracle.com/experts

  • Is it possible to manage QOS settings on BT Home H...

    Hi,
    is it possible to manage QOS settings on BT Home Hub?

    so I understand that there's no chance to put my dirty hands on these settings with my BT home hub 2.0
    is there's a chance to get complete list of default QOS settings for BT Hub & exchange?

  • Manage Infopackage Settings

    Hi Experts,
                     When we open manage infocube window we get 6 tabs lik external data, hierarchy selection, processing, update etc.....but recently for an infopackage manage section it just had 4 tabs. I just want to knw as to why it showed only 4. A clear  explanation as to why we are not getting all the tabs for certain things will be helpful.
    Thanks in advance
    Shiva

    Hi Experts
                   There is a typo error in this thread, instead of infopackage i have mentioned infocube. I want it for manage infopackage settings. Kindly ignore my mistake.
    Thanks

  • How to Managing Firefox Settings with Group Policy?

    Hi
    Is there any way to manage Firefox Settings through Windows group policy?
    I want to replace Firefox with IE in the network but don't know how to customize the settings with GPO.

    There are some third party solutions that have worked for others in the past:
    You would need a user.js file and a lock file with a list a preferences please see the instructions on how to do this:
    *[kb.mozillazine.org/Locking_preferences]
    *[https://mike.kaply.com/2014/12/16/managing-firefox-with-group-policy-and-policypak/]

  • Flash website settings wont save

    Hi im looking for some help, I'm changing my flash player settings to prevent glitching on a game i run, and each time i set the website settings to 10 mb it goes back to none when i check on the other ones like global and local it does fine. I mean i think they reset themselves once from maybe me deleting cache or history or something i dont know but it usually works please help

    NO ONE WILL REPLY WTF ADOBE!

  • What is username/password for Enterprise Management Website?

    Alright. I just installed the J2EE and Web Cache Install only of 9ias 9.0.2. However, I get done, and I try to access the Enterprise Management Website which by default you can get to at http://machinename.yourdomain:1810...that's what the installation program/script says...and it's correct. But nowhere in the documentation (and I cannot find the 9ias Administrator's guide anywhere on this website) does it tell you what the default username/password is for this website. Is this hardcoded into a file somewhere? What exactly is the default username and password...because it isn't blank?
    See, little tiny things like this is what bug the living daylights out of people who would otherwise be getting things done...and Oracle's software is riddled with stuff like this.

    The user is ias_admin and you should have been prompted for the password during the install.
    Good Luck!

Maybe you are looking for