HT5704 i have iphone 3gs my iphone has been updated 6.1.3 version but it's not activate, how i can active it ?
i have iphone 3gs my iphone has been updated 6.1.3 version but it's not activate, how i can active it ?
What exacly happens when you try to activate, including any error messagews
How did you "update" to iOS 6.1.3? The current iOS update for the 3Gs is 6.1.6.
Similar Messages
-
I have restarted my phone numereous times (because there's nothing else you can do to an iPhone) and every time it turns back on it'll have bars for a little while and then say " No SIM installed" or it'll go straight to "No SIM". Why is this happeneing and how can i fix it?
Sounds like your iPhone was hacked/modified/jailbroken to work
with wireless carrier other than the one it was purchased from. The
update has relocked it to the original carrier. Contact the original
carrier to see if they offer unlocking and if you qualify - only the
carrier to which the iPhone is locked can unlock it.
What does it say when you look at Settings=>General=>Carrier?
Be advised that the previous modifications to change from original carrier
to your local Carrier may have rendered the software unable to be updated or
officially unlocked. -
I am trying to update my iphone 3gs and it has been saying try again the activation server is temporarily unavailable
This usually happens if the phone has been Hacked / Jailbroken / Modified...
is this the case...? -
please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
"We're sorry, we are unable to continue with your activation at this time."You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.
-
My ipod has been disabled for 23 000 000 and I do not know how to solve the problem. can someone please help.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer. -
My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.
I have ALL the exact same symptoms as on my home computer.
It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc. -
I have changed my e mail adress and notified my Apple id but I do not know how to remove the old one and add the new one to my I Pod touch / I tunes and I Cloud.
Go to Settings>iTunes and App Stores and sign out and sign back
Same for:
- Settings>iCloud
- Settings>Game Center
- SettingsFaceTime
- Settings>Messages>Send and Receive -
Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?
Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time. Then restart the MacBook Pro. If it still will not scan, try using Image Capture from Finder > Applications and see if that will work. If not, contact Xerox about updated drivers.
-
Hi, I am new to this forum so please excuse anything I may say that sounds a bit stupid but I am not very technically minded.
I have got an iPhone 3gs ios version 4.1. The phone was locked to Vodafone and I asked them to unlock it which they did. I connected the phone to iTunes and it said congratulations your phone is now unlocked. My new Tesco sim card was accepted and the phone works fine. I have tried to download some apps but they all seem to need a higher version of the ios. iTunes says there is an update for my phone ios version 6. I need to know if I update my phone to this version will my phone still be unlocked and also will the phone continue to work properley. Hope someone can help.
Thanks DaveBHappy to have been of help. Hope all goes smoothly.
BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
https://discussions.apple.com/static/apple/tutorial/mark.html
and
https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards. -
Hi, i just want to know if theres any way to just stop the erase all data and settings for my iphone 3gs it has been 4 hours and it still havent finished yet, still showing the black screen with an apple icon. Im getting so frustrated, is there any way to just stop the process and roll back the changes made? Would it do any harm if i press on my home key and power button the same time? Thanks!
Something has gone wrong, on an iPhone 3Gs the erase all operation should be instantaneous. Disconnect your phone & force it into recovery mode:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new". -
I have tried to turn it off and lock it but the screen will not change. I have even tried to call it from my house phone, but it will not make any noise; even though the ringer is on.
try these steps: http://www.wikihow.com/Hard-Reset-an-iPhone
-
Issue with publishing an application that has been updated (application with multiple versions)
We are using App-V 5.0 SP1.
I have a package that will need to get patched whenever new security updates are released. The first version of the application always works fine, but when I update the application and re-publish it, a normal user is unable to pull down the new version.
When this occurs I am able to get everything going by logging into the server with an admin account and performing a sync (Get-AppvPublishingServer | Sync-AppvPublishingServer; Get-AppvClientApplication"). What is it about applications that
have been updated that would cause this behavior?
The issue is similar to what the hotfix below addresses, but since we are on 5.0 SP1 I am unsure if this applies still.
http://support.microsoft.com/kb/2799153?wa=wsignin1.0
You publish a Version 1 package of an application on a server
You log on to the client by using a user account
You confirm that the Version 1 package of Application Virtualization 5.0 is synched, and then you log off the client.
You publish a Version 2 package of an application, and then you remove the Version 1 application
You log on to the client by using a user account.
The application is not published to the userHello,
Have you verified the event-logs if the attempt to publish the package is visible there (successful or failed)?
Nicke Källén | The Knack| Twitter:
@Znackattack -
My computer and itunes recognizes my phone, but itunes says that the phone cannot be used because it requires 11.1 or later.
I have 11.1. I have tried restart, shut down, different cables.. HELP!!On your computer, launch iTunes, then: iTunes>About>Version...what does it say?
-
After I updated the carrier settings on my iPhone 5 with Verizon I've noticed that my phone shows that its connected to LTE with 4 or 5 bars showing but quite often no data is actually transmitting. When one of these periods happen I can't connect to any sites on Safari and all of my text messages trying to send over iMessage fail to send out. If I wait a few minutes it will start sending and receiving again. I've already tried to reset my network settings as well as restart my phone numerous times. I'm not sure if its related to this data connectivity issues or not but my battery seems to be draining quite fast compared even to my 2 year old iPhone 4.
I just switched to Verizon and seem to be having similar issues. I think Verizon is having more issues even after the update...now they won't be reading your wifi as billable data but that's because we can't even use it! I have to restart my phone 1-3 times per day to get LTE to work again! Seems to be whenever it goes from 3G to LTE or after I've placed a call for the most part... Working on contacting VZW tonight..this is BS.
-
I have lost my iPad or someone may have it. It is locked but find my iPad is not enabled. It doesnt have a sim. Can the find be set remotely? Or can it be found from the oriniak registration?
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom
Maybe you are looking for
-
Sound Distortion AP 11 and 12.
I'm experiencing sound distortion and weak signal after AP upgraded to 11. I downloaded 12 and I still have the problem. Windows 7.
-
I just don't think doing 18 steps just to get 1 ringtone is necessary...and if it is, it should be changed.
-
How can I re-download previous purchases 2006-07 if I do not have the same PC? Thanks
-
Mdadm raid1 stops to work after kernel panic
Accidentally I've booted with wrong grub parameters and my systems hanged with a kernel panic. After reboot my /dev/md2 device (raid1) stopped to work. These are some logs: wax@persifae:~$cat /proc/mdstat Personalities : [raid1] md2 : inactive sda1[0
-
The airport icon stopped showing on iTunes. What is the fix?
My airport icon stopped showing in iTunes. What is the fix? I am running iTunes on a non-Mac.