HT5704 Ipad update

I'm trying to download the iOS 6.1.3 for my Ipad 2, but an error shows in Itunes due to a connection timed out. Does anyone knows how to fix it so I can finally update my ipad?

Try temporarily turning off all your firewall and antivirus software on your computer until the download has completed.

Similar Messages

  • My iPad updated and wants a security code. I tried the one from my phone and it doesn't work - I never entered a security code. How can I get in now?

    ?My iPad updated and now wants a security code for access and I never gave it one. I tried code I used for my phone and it doesn't work. How can I access now?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Can't upgrade my ipad2 to ios5 .. itunes says ipad update server not found

    I have my main desktop I use for setting up my new iPad2.  Syncs fine, but when I tried to update to ios5, keep getting message that ipad update server is not available, check internet connection.  Itunes sees the internet, because it allows me to connect to the istore .. etc. Changed cables, I have tried it with firewall on, and firewall off .. makes no difference.  The test shows no connection, but you can see by the diagnostics that it did connect.
    PC is XP Pro,
    I could connect fine from my laptop, working on same home network, however if I upgrade, it will dump all my apps .. I don't want to lose everything.
    Is there a way to unsync my desktop, then sync with my laptop instead, backup, then do the update from my laptop?
    Here is the info below ..   Thank you ..
    The diagnostics file shows;
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    Gigabyte Technology Co., Ltd. G31M-S2L
    iTunes 10.5.1.42
    QuickTime 7.7.1
    FairPlay 1.13.36
    Apple Application Support 2.1.5
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    Current user is an administrator.
    The current local date and time is 2011-11-27 20:39:51.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16002)
    Video Display Information
    Intel(R) G33/G31 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.5.1.42 is currently running.
    iTunesHelper 10.5.1.42 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Description:          Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC - Packet Scheduler Miniport
    IP Address:          192.168.1.99
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.1.1
    DHCP Enabled:          No
    DHCP Server:          255.255.255.255
    Lease Obtained:          Wed Dec 31 16:00:00 1969
    Lease Expires:          Wed Dec 31 16:00:00 1969
    DNS Servers:          192.168.1.1
    Active Connection:          (none)
    Connected:          No
    Online:                    No
    Using Modem:          Yes
    Using LAN:          No
    Using Proxy:          No
    SSL 3.0 Support:          Enabled
    TLS 1.0 Support:          Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-11-27 20:27:00.

    It's my understanding that you do not need Lion on your Mac but you do need the latest version of iTunes. If you already have this, there may be some other problem.

  • What happened is that my internet connection was not good so i downloaded .ipsw file from a torrent but now i cannot get it to update my ipad because ios 5.0.1 is out i tried copying files to ipad updates in the itunes folder but no help

    what happened is that my internet connection was not good so i downloaded .ipsw file from a torrent but now i cannot get it to update my ipad because ios 5.0.1 is out i tried copying files to ipad updates in the itunes folder but it still asked me to download a 700mb software update
    plz help

    If you downloaded the correct version for your iPad model (and the different models have different ipsw files), then you should be able to navigate to it in iTunes by pressing and holding the shift key on Windows (command key on Mac) when clicking the Check For Updates button.
    Message was edited by: King_Penguin

  • TS3694 I keep getting 'ipad software could not be updated at this time as ipad  update server could not be contacted or is unavailable at this time' have tried everything?? Help

    Hi after updating my iPad to Os6  I get to the point where it needs to be restored? It does a download bar and says 'Extracting software' then I get the message 'iPad cannot be restored at this time because the ipad update software server could not be contacted or is temporarily unavailable' .. I have been to the trouble shoot section ..as it has an error code .. but when you click on that it does nothing .. I have turn off my firewall etc.. just keep getting that message?? HELP

    Me too! I have iPad 2 on iOS 6. Not sure what to do.

  • IPad update Error- There was a problem downloading the software for the iPad .... network settings

    "iPad update Error- There was a problem downloading the software for the iPad X you do not have enough access privileges for this operation. Make sure your network settings are correct and your connection is active, or try again." is the error. The rest of iTunes, sycning, and ipad operations work. I am on OSX 10.6.8. iTunes is the most recent addition.
    I've been having this problem for a while but it has yet to go away. Any help please?

    OK. Good. The most likely culprit is either your firewall or anti-virus software. Temporarily disable both while you are doing the update (then, of course, turn them back on when you are done).

  • How Does iPad Update Its Clock?

    I noticed that time on my iPad 3G 64GB is slightly different (less than a minute) from time of my MacBook Pro, that itself is different from time of my iPhone.
    How does iPad update it's clock?
    Thanks in advance,
    lux

    lvcivs wrote:
    I noticed that time on my iPad 3G 64GB is slightly different (less than a minute) from time of my MacBook Pro, that itself is different from time of my iPhone.
    How does iPad update it's clock?
    Thanks in advance,
    lux
    Your MBP updates time from a time server over the internet. The iPhone sets the time using the cell phone system. My AT&T iPhone is always 1 minute behind my MBP.
    I think that the iPad syncs time with iTunes or through the WiFi network. My iPad which syncs to my MBP and uses WiFi from an Apple AirPort Extreme has the same exact time as my MBP, down to the second (they switch minutes simultaneously). I might be wrong on this point, so if someone knows something more, I will stand corrected.

  • Anyone have issues with the most recent iPad updates?

    Since the last iPad update a few days ago, it seemed to have crashed my iPad.  I was told to reset my iPad to original factory settings.  After doing so, I now have no sound to all of my Facebook games.  How do I complain and fix this situation?

    Since the last iPad update a few days ago, it seemed to have crashed my iPad.  I was told to reset my iPad to original factory settings.  After doing so, I now have no sound to all of my Facebook games.  How do I complain and fix this situation?

  • With the new ios7 IPad update how do I close open apps

    With the new ios7 IPad update how do I close open apps

    Double tap the home button to get to the multitasking display and then Drag the app up from the multitasking display.

  • TS3274 After iPad update I can't access my notes! Crashes opening with blank page. I have tried turning on and off. I have tried the reset to original. I have tried downloading again. Now what? I have important information that I need to get....

    After iPad update I can't access my notes! Crashes opening with blank page. I have tried turning on and off. I have tried the reset to original. I have tried downloading again. Now what? I have important information that I need to get....

    If you have set this phone up, then there would not necessarily be a solution here until you have been verify with the provider that everything is provisioned correctly on their end. Since the 3G comes from your cellular provider, if the settings are correct on the phone, then you should work with the carrier next.

  • Hi - I need to download an iPad update and when I do the file successfully downloads and then proceeds to "progressing" then times out - I think it is my firewall but I have turned off all firewalls

    Hi - I need to download an iPad update and when I do the file successfully downloads and then proceeds to "progressing" then times out - I think it is my firewall but I have turned off all firewalls

    If it scare y ou then take the machien back and ask the Apple Store to do this for you. What has probably filled your computer is large libraries such as music,  photos and movies. Apple explains how to move those libraries to an external HD. Please read:
    http://www.macworld.com/article/1153165/move.html
    http://support.apple.com/kb/PH2506
    http://support.apple.com/kb/ht1449
    http://support.apple.com/kb/PH2506

  • The iPad update server could not be contacted. Please check your internet connection or try again later.

    Cant update my sons ipad 2 to ios 5. We got it at christmas and have not been able to update it. Keep getting the ipad update server could not be contacted. check your internet connections or try again later. I have tried turning off my firewall and tried at all times of the day or night. Im using windows 7 on my PC.

    The only other thing that I can think of to try is to restart everything. Quit iTunes, reboot your PC, restart the iPad and then try again.
    Here is an article about troubleshooting iPad updating issues. It could be some other security settings that you have that are blocking the update from proceeding. There are a number of things that are discussed in this support article. Check it out and see if there is anything in it that you can try.
    http://support.apple.com/kb/ts1275

  • Downloaded iPad update and now i can't get wifi for my personal hotspot

    downloaded ipad update and now I cant seem to be able to use the wifi from my personal hotspot. 

    you can try system restore, restore point where the critical update is
    ▬JM▬

  • TS3274 The sound works except when trying to watch television. IPad updated yesterday. Sound for TV worked fine before update. Could it be the update that has caused this glitch?

    My iPad updated yesterday. Before it updated, the sound worked fine when watching aTV app. Now the sound works on all apps except the TV (e.g. ESPN) and then there's no sound. Could the update have caused this or what may have cause this? Any ideas?

    Also check the following:
    1. If Side Switch is set to Mute, check to make sure it's not muted
    http://i1224.photobucket.com/albums/ee374/Diavonex/1237fb40.jpg
    2. Check the Volume buttons
    http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
    3. Double-click the Home button; swipe the Task Bar to the right. Check the Mute and Volume settings.
    http://i1224.photobucket.com/albums/ee374/Diavonex/acd1c239.jpg

  • Trying to download iOS 5.1 to my ipad2 through itunes on mac - box says contacting the ipad update server and never connects

    contacting the ipad update server ... " is the continuous message i have been getting for 2 days when ipad2 is connected to macbook pro via usb - connection is never made
    "unable to check for update - an error occurred while checking for a software update - cancel or try again"
    is message when i try to update from ipad 2 directly
    i am currently in the caribbean could these be problems of being outside of the U.S.?
    or just server overload?
    any suggestions - firewall off

    Just found this fix from another post: 
    Make a temporary update to your DNS settings go to:
    SYSTEM PREFERENCES>NETWORK>ADVACED>DNS
    change DNS by adding ( + )
    208.67.222.222
    then
    208.67.220.220
    click okay/apply after. then try the update. after the update, just delete the two open DNS server numbers. should revert back to your old one.
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh14127.html
    See the an

Maybe you are looking for

  • [Pulseaudio] equalizer problem (solve)

    Hello I installed pulseaudio and all work fine but I tried to setup a system wide equalizer with the ladspa-sink module. I think the module is well load but there is a problem with pa_sink_input_update_max_request function. I am not alone in this sit

  • Technical link between a PM order and its operations (routing number)

    Hi all, I would like to know how to make link between a PM order and its routing number for operations in the order (field AUFPL) ? Thank you. Regards. Laurent.

  • Foreign trade data - Blocking orders for embargo countries

    I have now seen this process in my test system. I can still enter an order for a country who is marked for embargo and it saves. It will also give me a confirmed date for the goods and the requirements do still show up on MD04. It does show up on the

  • Query regarding document type

    This is a basic part of FI The Document flow in SAP-FI is categorized by the document types attached to them. All this document types differentiates the document flow, i.e. from where the accounting document was generated form SD, MM, FI etc. What SA

  • Wiping and recycling old Mac Mini

    I'm cleaning clutter out of my house, and ran across my old Mac Mini, purchased about 10 years ago.  I need to wipe it and get it recycled, but I'm not sure about the wipe part.  I no longer have the keyboard or mouse.  (I use a Macbook Pro now).  Is