HT5730 10.8.4 update???

Every time I do the 10.8.4 update it restarts my iMac 27" 2011 Model then the update appears back in the app and say an update is ready and i need to do a restart. What gives Apple????

Click here and install it manually.
(87291)

Similar Messages

HT5730 Having trouble to update to 10.8.4

I am having trouble to update to 10.8.4 since the time it was required i think 4 months ago and until today I am not able to update it.
Steps I am following:
Clicking on App logo then software update
iTunes opens and i go for the updates and update
It asks me to Restart, I do it and then when it restarts,
iTunes main page opens and i can still see 1 update available, when I check the update I still see the same update is required and on and on again.
Please help me what to do. I am using MacBook Air, Processor 1.7 GHz Intel Core i5 Memory 4 GB 1333 MHz DDR3
Thanks
Gebran

You cannot upgrade to Mountain Lion from iTunes. Do the following:
Give this a try:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
After this is completed download and install 10.8.4 Mountain Lion Update v10.8.4 (Combo).

HT5730 having problems installing updates

i cant install the new mountain lion update on my mac pro

What is the exact symptom/behavior? What steps have you completed? How far do you get? What error message(s) do you see?
Are you logged on as an administrator? Do you see the update awaiting installation in "Updates"?

HT5730 How can I find out the size (Kb /MB) of software updates?

My software updates available contains a number of program updates. I have a daily data allowance of 400 mb. I want to prioritise my downloads, but cannot make a decision without knowing how big each update is. So, how can I find this out ?

This information does not seem to be easily available anymore, in many cases. See, for instance, the discussion at:
https://discussions.apple.com/message/22563518#22563518
Also, be aware that the trend seems to be for updates to be automatically downloaded without user interaction, ready for installation! You can uncheck "Download newly available updates in the background" inside System preferences under "Software update". I think it is checked by default.
The best answer, although I don't think it's a great one, seems to be that once you start the download, the download window will show you how big it is. In previous versions of OS X, the size of the download appeared in the update screen, but has now gone.
Hope that helps.
Ivan

HT5730 the do download has been interrupted becouse of an electricity circuit problem.After that i cannot download the update..What i have to do

The downloading of 10.8.4 was interrupted because of a problem of electricity circuit.After that it is impossible to dowload it .what i have to do to download the update 10.8.4

Always charge your battery, prior to doing updates and installations, this would not have happened if you had!
Download 10.8.4 here.

HT5730 Every time I try to download the OX X Update 10.8.4 on my mac, I am instructed to restart the computer.

Every time I try to download the OS X Update 10.8.4 on my mac, I am instructed to restart the computer.
After I restart the computer and try to update, I get the same message to restart the computer! Ugh!
I did the repair disk permissions and still have the same problem. HELP!

try this:
10.8.4 Combo Update

HT5730 Update 10.8.4 will not install correctly

Anyone else experiencing same issue? Installs - restart - load up and same update present.

What version are you trying to update to? Your profile says you're running 10.8 4 and that's the latest version. Why do you think you need to update again?
What are you updating from: the App Store or with this: OS X Mountain Lion Update v10.8.4 (Combo). If you haven't tried the combo updater download it and give it a try.
If you're having problems with the App Store you might try this:
1 - enable the Debug menu in App Store:
open the Terminal application.
copy the command below and paste into the Terminal window:
defaults write com.apple.appstore ShowDebugMenu -bool true
followed by Enter.
launch App Store, login.
2 - select the Debug ➙ Reset Application option:
3 - try again.
OT

HT5730 Update doesn't work

I've installed the update 5 times now and each time it restarts it doesn't recognize that the update is already installed and it tells me to install and restart again and again and again

Click here and install it manually.
(88702)

HT5730 Lion update 10.8.4 will not install

I have been trying to install Lion update 10.8.4 for several months. It goes through the process and restarts my computer (Macbook Pro) but when everything is up and running again the App Store updates still shows this update. I have checked the "about" sections on the programs it should be updating and it has not updated. What is going on?

Give this a try:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
After this is completed download and install 10.8.4 Mountain Lion Update v10.8.4 (Combo).

HT5730 10.8.4 will not update on my iMAC. It shows up in my apple store updates. It asks me to restart computer and it restarts. Yet, it does not take. Any suggestions?

10,8,4 update on Mountain Lion will not take on my iMAC. it goes through the process of restarting computer but it doesnt take, reappearing in my requested updates.

I think I've seen this problem mentioned a few times on here. Downloading and installing the combo will hopefully solve the problem:
http://support.apple.com/kb/DL1659

Which update do I download: 10.8.4 or 10.8.4 (Combo)?

I have an early 2009 iMac (model id iMac9,1) running 10.8.3 (build 12D78). At support.apple.com/downloads I'm presented with two updates: version 10.8.4 with no suffix--apparently the cooking variety, and 10.8.4 (Combo). The cooking variety download is 342 MB while the Combo download is 810 MB. It's clear, even to me, that there's a whole lot more in the latter than in the former. One article, HT5730, is cited for both and offers no distinctions. There is no guidance about which to choose. Can someone point me in the right direction?

Lightning George wrote:
I have an early 2009 iMac (model id iMac9,1) running 10.8.3 (build 12D78). At support.apple.com/downloads I'm presented with two updates: version 10.8.4 with no suffix--apparently the cooking variety, and 10.8.4 (Combo). The cooking variety download is 342 MB while the Combo download is 810 MB. It's clear, even to me, that there's a whole lot more in the latter than in the former. One article, HT5730, is cited for both and offers no distinctions. There is no guidance about which to choose. Can someone point me in the right direction?
IMHO download and install the Combo Update. I have always used them as they update everything from 10.8 in completeness, whereas the incremental updates are only updating the improvements made in the new version, if that makes sense. So I would suggest to always use the Combo.
Cheers
Pete

Tecra M9-136 - BSOD during Vista SP2 update

Tecra M9-136 asked this morning to update to Vista SP2 and during the process the BSOD 0x0000007E arrived. Restarted in Safe Mode and the installer continued and then finally reported that the update had failed - and reverted to SP1. This took most of the morning.
It will start in Safe Mode but on a normal boot-up, Vista SP1 gets through the fingerprint recognition and then fails with the same BSOD (it doesn't get as far as displaying the desktop).
The laptop has BIOS level 1.80. I've tried in Safe mode to install 1.90 but it tells me that the battery has insufficient charge and the power adapter isn't attached. Both untrue.
Stuck - need advice. Could this be a hard fault? Can't see how I can update anything if it's a soft fault.
thanks

The message with the BSOD mentioned checking BIOS and driver versions. Anyway, no change made to that.,
I tried System Restore but the only available restore point was the SP2 installation. I thought Vista was supposed to save a restore point every 24 hours even if nothing new had been installed.
I've now found in System Information / Windows Error Reporting several messages like this:
28/09/2009 12:08 Windows Error Reporting Fault bucket 0x7E_NULL_IP_DRVNDDM+57bd, type 0
Event Name: BlueScreen
Response: None
Cab Id: 0

Problem signature:
P1: 
P2: 
P3: 
P4: 
P5: 
P6: 
P7: 
P8: 
P9: 
P10: 

Attached files:
C:\Windows\Minidump\Mini0928 09-04.dmp
C:\Users\me\AppData\Local\Te mp\WER-75660-0.sysdata.xml
C:\Users\me\AppData\L ocal\Temp\WER7D78.tmp.version.txt
& #x000d;
These files may be available here:
C:\Users\me\AppData\Local\Mic rosoft\Windows\WER\ReportArchive\Report06d1c4b5

Cannot open and update IPhoto after upgrading to OXYosemite

From the App store, I downloaded and installed OXYosemite. There are 2 more updates available: iPhoto and iMovie. When I try to upload them, the notice I get is "Update Unavailable with This Apple ID This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
I have 2 apple IDs when I inquire about my ids. Signing in App Store with either of them, doesn't resolve the problem. I get the same notice. iTunes, Mac, mobile downloads, all use the same apple IP, only for the computer downloads from App Store isn't working.
What should I do?
Thanks, Sev

I have the same problem and can't find out how to correct it. Unable to update iPhoto or iMovie .. I get the same message as above user. Help!

Error message: "playlists selected for updating no longer exist"

I tried to update my ipod nano and I guess I had deleted a playlist, but since then, I have not been able to update. Every time I try, I get the following message:
"Cannot be updated because all of the playlists selected for updating no longer exist."
I haven't been able to highlight which playlists are selected to begin with.
I read through the manual and thought that maybe rebooting the whole system might work. So I deleted Itunes from my computer and re-installed.
Then I tried re-setting my ipod. So now I have nothing on my ipod.
I also deleted everything from my library, thinking it might help to start from scratch. Nothing has worked.
How do I "select" and "unselect" playlists so I can get up and running again?

Here you go.
http://discussions.apple.com/thread.jspa?messageID=607312&#607312

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

HT5730 10.8.4 update???

Similar Messages

Maybe you are looking for