HT5812 I can't get the fades or crossfades to work in LP X. Help, please?

I don't know what I'm doing wrong and I can't find it anywhere online. I have about 4 takes of drums recorded. No fades work at all. The fade icon in the pdf manual is different than the one I have, which looks like this: >
I have used pro tools and its cake compared to this. I've searched tutorials and they just click on the fade tool and fade a track just like in pro tools. But for some reason mine doesn't even do that. Any suggestions? I also see no option to "Flatten stack". Not sure if the two are related.
Joshua

Hi
You cannot apply fades to Take Folders. Within a Comp, crossfades are automatically applied according to Preferences:Audio:General.
Flattening a Track Stack is not the same thing as flattening a Take Folder. To do the latter, click on the Take/Comp menu top left of the Take folder
CCT

Similar Messages

I can't get Silverlight 4 or 5 to work on my IMAC-Help Please

Hello. over a year ago I deleted my Netflix account because I couldn't use my computer to watch netflix. This happened after I Updated my silverlight. I kept getting a Player error 1001 message. I called Netflix who were useless and pawned me off to Microsolf who tried to help initially by email and then gave up saying it was a mac problem so I then ended my service. I recently rejoined thinking that after a year and an upgrade to LION, the problem would have been fixed in an update--but it hasnt and I'm still getting the same story from Netflix and the same error message. I tried installing and uninstalling from different site- different versions (4 and 5) with no luck. Does anyone know how to fix this? Thanks inadvance.

Go back to the beginning ...
Uninstall Silverlight by following these steps: http://www.microsoft.com/getsilverlight/get-started/install/removing-silverlight -mac.aspx . Also trash:
/Library/Receipts/Silverlight.pkg
/Library/Receipts/Silverlight_W2_MIX.pkg
/Library/Receipts/WPFe.pkg
Reboot, and reinstall Silverlight 5 from: http://www.microsoft.com/silverlight/
Also, from a Microsoft troubleshooting note .... ensure your browser is not setup to run using Rosetta (of course Rosetta can't run under Lion, however...)
Double-click the hard drive icon on the desktop.
Choose the Applications folder.
Find the icon for the browser that you are using. Hold down the CONTROL key while you click this icon.
Select Get Info.
Locate the Run using Rosetta option and make sure that this check box is not selected. If it is selected, click to clear the check box. Close the window.
On the Apple menu, click Restart.
After the computer restarts, again try to access the Web site that generated the error message.

I can't get the reset homepage procedure to work on Firefox 26; Help!

I followed directions EXACTLY on how to set a new homepage... hasn't worked and I've checked and rechecked that I'm doing it right. I type in the url for the page I want and when it loads, I click on the icon at the immediate LEFT of the nav bar and drag it all the way to the right and drop it on the homepage icon, but nothing happens. So what am I doing wrong? This is a desktop pc with Intel CPU and Windows XP with all 3 service packs. I hope all this works because I'm about ready to ditch FF26 and go back to IE8!

Make sure that the Yahoo toolbar isn't causing this issue.
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Note that you have the GreatArcadeHits Add-on 1.0.0 extension, considered as malware, installed.
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars

I can not get the download for indesign to work

I can not get the download for indesign to work.

Perhaps this Adobe Help document may help you:
http://helpx.adobe.com/creative-suite/kb/download-install-trials.html?t2

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

It actually sounds like the warp text window is opening off screen.
Resetting the photoshop elements 10 preferences should fix it.
*Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
*Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
*Press Yes

My aperture library will not open after restoring my whole computer after a kernal panic. I can not get the Aperture troubleshooting menu to open...any help?

My aperture library will not open after restoring my whole computer after a kernal panic. I can not get the Aperture troubleshooting menu to open...any help?

Leonie,
Fisrt let me thank you for your reply and assistance! So here is the problem with so more detail...I was not sure I was going to get any replies ; )
I restored from a time machine back up.
History of Failure:
I was trying to launch Aperture when the kernal panic occured. My computer had been closed, and asleep and the battery was dead. I plugged in charger and it was restoring/waking up after being asleep/shutting down from dead battery. I launched Aperture from the dock and as soon as it opened the kernal panic occured. After that the computer would not turn on. It would try to boot then it would shut off. I even tried to safe boot to no avail. I went to the Apple store and they told me that the only thing I could do was restore whole computer from back up. So thats what I did.
Since then my previous aperture library: "2011" will not open. I have created a new aperture library "2012", and it runs fine. I have added new photos for about the past month...no problems.
When I launch aperture with 2012 library then try to switch libraries, I get the following prompt: "The selected library is from an older version of Aperture and requires a relaunch to switch." I choose "Relaunch" and I get the following warning prompt: "There was an error opening the database for the library “~/Pictures/Aperture Library 20111.aplibrary”." The only option is "Quit"
Both libraries are version 3.2.3
Computer stats: 3.06 GHz Core 2 Duo, 8 GB 1067 MHz DDR3 RAM, OS X 10.6.8
I have tried to launch aperture troubleshooting by holding option+command from both the aperture icon and from the library file, neither will launch the troubleshooting feature.
I am ok with computers, but not a whiz (mechanical engineer)...to me it seems as though there is a corrupt path or file or some sort of "check" that is failing, becuase the failure occurs so fast after trying to launch aperture. Maybe that doesn't make any sense but just a thought.
I hope that you may be able to provide some insight. Thank you again for you time and I hope that you have a nice day!
Mike

HT3552 I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for your help.

I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for yur help. nhuttan448

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

I can't get the patch select buttons to work in edit mode.

I can't get the patch select buttons to work in edit mode. When I select any template, the set buttons or the patch buttons don't work at all. My up and down arrows work fine but I need the on screen buttons to be assigned to my footswitch.

In edit mode, at concert level, select the pedal. Then in the screen control inspector, in the mappings tab, select actions>next patch.

TS4268 I can't get the iMessage or FaceTime to work on my iPod touch. I updated to the latest iOS. I have ensured restrictions are off and 'Set Automatically' is selected under date & time settings. I can enter my apple ID, but it bounces back to the l

I can't get the iMessage or FaceTime to work on my iPod touch. I updated to the latest iOS. I have ensured restrictions are off and 'Set Automatically' is selected under date & time settings. I can enter my apple ID, but it bounces back to the first login screen.

I just hit the home key very fast 3 times and it worked. Glad to see that someone suggested this to another person with a mini. My gremlins are all gone. Yea to the forum .......Marci 73361

I can't get the yahoo messenger app to work on my phone, all it does is show is "connecting" and I appear on-line to my contacts.

I can not get the yahoo messenger app to work on my iphone.

Same problem here!
I'm using the latest in Chrome, Firefox, and IE 8, regular and compatibility mode. This is extremely frustrating, one of the primary reasons I bought this printer was for the mobile/eprint functions.

I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

Thanks for your note. My tech dept could not come up with any explanation for the dictation tool not working. We have about 1,000 employees in our office - I think I will send an all employee message to see if anyone else has the issue.

HT4061 HOW CAN I GET THE CODE TO MAKE IT WORK IN EGYPT

HOW CAN I GET THE CODE TO MAKE IT WORK IN EGYPT
this is my details serial: DN*******8GH
IMEI : ****
MEID : ****
MODE : MD656LL
<Edited By Host>

If your phone is not unlocked you need to contact the carrier it's locked to.

I have a new pc with win8.1 and I can't get my Photoshop Elements vers 1.0.1 to instal help, please.

I have a new pc with win8.1 and I can't get my Photoshop Elements vers 1.0.1 to instal help, please.
Please assist with this compatibility issue. Thank you

Gordonr18571658 I am sorry I don't have any additional suggestions for how to install Photoshop Elements 1.0 besides installing in compatibility mode for Windows XP.
As an alternative you can find details regarding Photoshop Elements 13 at Picture editor, edit pictures | Adobe Photoshop Elements 13. Photoshop Elements 13 has been designed to install and function under Windows 8.1. There is a 30 day trial if you wish to evaluate the software and complete any current photo editing projects you may be facing.

HT201269 i am trying to get my contacts from an old iphone 3s to a 5c and i am not getting the new phone to stay connected to itunes. some help please on what to do!

i am trying to get my contacts from an old iphone 3s to a new 5c and i am not getting the new phone to stay connedted to itunes. some help please on this problem!!!

One way is to Drag and Drop the Entire iTunes Folder from your Old Computer to an External Hard Drive...
Then Drag and Drop the Entire iTunes Folder to the location of your Music on the New Computer...
These Links may Help...
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751
Moving iTunes Media Folder
http://support.apple.com/kb/HT1364
Cheers

HT4352 i set my apple up prior to setting up the itunes. I now can't get the apple tv remote to work any suggestions

I am having issues setting up my appletv. I made the error of setting it up without having itunes on my computer. I can't get the remote to work, the light isn't on the box, and I can't get it to reset to factory default. I don't have a "-" key on my remote. I held the menu button down with every button on the remote without success.
Please help!!

Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

HT5812 I can't get the fades or crossfades to work in LP X. Help, please?

Similar Messages

Maybe you are looking for