HT5812 Will East West Quantum Leap SILVER work with Logic Pro X ?

I wonder if EWQLSO SILVER edition will work with Logic Pro X. I can't think of any reason that it should NOT but if anyone tested please let me know. The software is quite old..
Thanks

it's worthwhile considering the VSL Special Edition, but check whether anyone else is running it on macbook, my iMac (also 4GB) is very happy with it, and some of the sounds are wonderful.
Best
Steve

Similar Messages

  • I am trying to use East West Quantum Leap Symphonic Orchestra with Garageband '11 and East West isn't showing up on the Audio Unit Modules List. Help?

    I am trying to use East West Quantum Leap Symphonic Orchestra with Garageband '11 and East West isn't showing up on the Audio Unit Modules List. Help?

    Not sure what to say. Have the free version, installed it and GB found it. Perhaps contact East West support if you have a paid version...

  • Logic Studio 32 bit and (AU)East West Quantum Leap Goliath 64bit Question

    I have a Mac Pro 8 core Zeon Harpertown processor's. Its the latest mac Pro with 10 gigs of ram.
    I also have Logic Studio 2 and Logic Express. I just purchased East West Quantum Leap Goliath.
    Here is the major Dilema:
    Mac OS is 64 bit. East West is 64 bit but Logic is 32 bit.
    Won't there be a problem with east west AU being run on 64 bit in a 32 bit application? East West New Engine is 64 bit so its not just the samples its alos the engine.
    The only 64 bit audio sequencing software right now is Sonar. I heard it was 64 bit because of its Video module is also 64 bit.
    Anyhow how is this going to work running an AU that is 64 bit in a 32 bit application?
    Thanks

    Are you sure? There would be absolutely no point whatsoever in releasing a Mac 64-bit plugin, as there are no 64-bit hosts on the Mac, and likely won't be for some time. Logic isn't going fully 64-bit anytime soon.
    You can't run 64-bit code in a 32-bit host, so why would they release a Mac plugin version if it was essentially unusable..? And how would they test it..?
    Edit: I just looked at the press release. It says "32-bit support is also included".

  • 01v96i Yamaha...will it work with logic pro X

    I bought the new Yamaha 01v96i Mixer but I can't make it works with Logic pro, in the list of available DAW I only find the 01v96 which is not the same and in-fact it does not work with the 01v96i.
    Does anyone have an idea on how to set Logic for it or at least does anyone know if the new Logic Pro X has the new 01v96i in the list?

    Lyford,
    Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
    Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
    As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

  • Will the Tascam FW-1884 work with Logic Pro X?

    Hello,
    I notice that the new Logic is 64 bit only and yet the Tascam FW-1884 is specifically listed as a supported control surface.
    Tascam has not released 64 bit drivers for this device!  Can anyone shed any light on this?  Will it work only as a control surface and not an audio interface?  Is the documentation in error?  Anyone have this working with Logic Pro X?
    Thanks,
    Lyford Rome

    Lyford,
    Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
    Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
    As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

  • Do you know if the Digidesign 192 will work with Logic Pro X?

    Hi everybody! The question is simple, maube the answer too... Do anyone know if the Digidesign 192 I/O will (completely) work with Logic Pro X or if it needs other devices (such as controllers, internal or external card, etc.)? Thank you all.

    Hi Jacub,
    I have a 2i4 running Mavericks 10.9.2 on a Mac Book Pro, and my unit works properly, please make sure your run the unit with the class compliant mode app (click the link below):
    http://us.focusrite.com/downloads?product=iTrack+Solo
    Please contact Focusrite support if you have any more concerns.
    Best Regards,

  • Will a Mackie Control Universal V.2.1.2 work with Logic Pro 9?

    Will a Mackie Universal Controller V. 1.2.1 work with Logic Pro 9?

    Mine does. There was something If I can remember how to do it about after the update selecting the controller to mackie controller. You have the option within the controller itself to be mackie controller or logic controller. If it powers up and says mackie controller, You should be fine. If you have a problem get back to me, Ill look for the link that tells you how to change it.

  • Will  card nVidia geforce GTx 760 work with premiere pro?

    Will  card nVidia geforce GTx 760 work with premiere pro?

    Yes, the GTX 760 will work nicely with Premiere on the PC. What version? With CS6, you may need to delete the "cuda_supported_cards.txt" file from the Adobe folder.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

    Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
    The wha wha pedal work well with GarageBand but not working with Logic Pro
    Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
    HOPE YOU UNDERSTAND MY ENGLISH

    Pancenter...
    Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
    I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
    +1 on the UAD stuff....
    Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
    Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
    Thread 32:
    0   libSystem.B.dylib      
    0x94c29afa mach_msg_trap + 10
    1   libSystem.B.dylib      
    0x94c2a267 mach_msg + 68
    2   ...tope.audioplugins.AU.Trash2
    0x667bd57a catch_exception_raise + 250
    3   libSystem.B.dylib      
    0x94c57259 _pthread_start + 345
    4   libSystem.B.dylib      
    0x94c570de thread_start + 34
    That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

  • Which MIDI keyboards work with Logic Pro x and Yosimite?

    can anyone suggest some midi keyboards that work with Logic Pro x and yosimite

    Hi Jacub,
    I have a 2i4 running Mavericks 10.9.2 on a Mac Book Pro, and my unit works properly, please make sure your run the unit with the class compliant mode app (click the link below):
    http://us.focusrite.com/downloads?product=iTrack+Solo
    Please contact Focusrite support if you have any more concerns.
    Best Regards,

  • Will my m audio Project Mix work with logic x?

    Hi, just wondering if my M-Audio Project Mix I/O will work with Logic X. I am currently running Mavericks.

    If it works with any other CoreAudio based app on your Mac.. it should work fine with Logic Pro X as the key is .. if it is compatible with your OS X version. Its not about compatibility with Logic Pro X at all in reality... as LPX uses Core Audio which is part of OS X.
    So do you have it up and running in 10.9.2 and does it work with any other audio app? If so which one(s)?
    If you haven't tried yet, you may be out of luck as the last driver update for your device was way back.. for 10.7.4.... and some people had issues getting to work under Mountain Lion, let alone Mavericks...
    http://community.m-audio.com/m-audio/topics/project_mix_driver_update_for_mac_os _10_8_5_final_version_of_mtn_lion

  • Will MainStage 3 work with logic pro 9

    Hi
    Will i be able to use Mainstage 3 with Logic Pro 9. I intend to use it for playing guitar over backing tracks made within Logic Pro 9. Also is latency a problem. I have 2.5GHz quad core I5 MacBook Pro with 4Gig RAM.

    You shouldn't have latency problems if you have it set up properly. I can run both programs simultaneously on a 2009 dual core 2.4 MacBook Pro with 6 GB Ram. I would consider upgrading your RAM. You may want to try using the Playback plugin in Mainastage 3 for playing back your mixed down tracks. Then you would only need to run Mainstage by itself live.

  • Novation Remote 25SL Not Working with Logic Pro (Logic Automap)

    Hi,
    I can't seem to get my new Novation Remote 25 SL to work in Logic Automap mode.
    I have the Remote SL in Logic AutoMap (template #39). When I launch Logic Pro 7, The Remote SL shows : "Logic AutoMap" on the Left LCD display, and nothing else happens, it seems to be frozen at this state. The Up/Down arrows on the Left side don't change anything.
    Any clues why this is happening ?
    I have read many posts on this and other forums of user issues in setting the Remote up properly, and have it work in Logic Automode. Tried many configurations, and settings, re-installed sw, OS 1.0.13, but no luck so far.
    I would like to hear from Logic Pro 7 users who have successfully setup their Remote SL with Logic Pro 7.2.1 in Logic Automode, and are working with this system without any issues.
    This will be very helpful in figuring out if there is something wrong in my settings, or if the unit itself is defective, or I am doing something wrong during the installation of the software ? I have been trying to get this thing to work for the past two days, with no success so far.
    The Remote SL should be a wonderful controller for Logic Pro 7 (once it works !) so, I'm being as patient as I can with this thing.
    I'm using Logic pro 7.2.1 on a Mac G5 2.5 Quad, Mac OSX 10.4.6
    Thanks.

    Hi Blaze,
    I tried your settings, but no change, the Remote SL is still frozen showing :
    "Logic Automap" on the left LCD .
    You mention setting "Mixer View 64" well the parameter I see is called :
    "Mixer View Fader" which I guess is the same one you are referring to. I set it to 64, it was set to 8, but has not changed anything. Still having the same problem. This problem is dragging into Day 3, what a bummer.
    Thanks.

  • Preamps/comp working with logic pro 7

    Ther is so much to choose from in the preamp/comp world.I have looked at focusrite,and joemeek.My spending limit is around $700.Im looking for a all in one unit(preamp/comp,with an optical out.Im welcome to any ideas,Im getting a G5,with logic pro 7.Right now i have a G4 laptop,with a firewire 410 from m-audio,Thanks Derek
    powerbook g4/powermac G4 dual 1.25Ghz   Mac OS 9.2.x   Logic audio platinum 4.8.1/Logic pro 6

    your preamp/comp has nothing to do with logic pro 7, they will all work, there are probably better places to ask for help with this kind of question, such as gearslutz.com

  • USB Interface Not Working With Logic Pro 9

    Hello,
    I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
    I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
    I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
    Thank you.

    The problem lies with Tascam and their inability to write stable drivers for OS X...  and isn't anything to do with Logic Pro ..
    As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with  Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
    The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
    (Thanks to Paulypaulpaul for this)
    -uninstall your tascam driver 2.10
    -restart
    -install driver 1.03
    -restart
    -plug in your tascam
    -goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
    -install drivers 2.10
    -restart
    Follow each of the steps exactly.. including all restarts when indicated..
    ...and good luck...

Maybe you are looking for