HT5824 does notes get backup to icloud?

does notes get backup to icloud?

There is some evidence to suggest they might, but as yet I haven't seen a positive confirmation.

Similar Messages

  • Hi, im not able to backup all ma contact to my icloud using my iphone 3gs. only 290 out of 600 contact gets backup in icloud, though i hav enough memory. How to fix it ?? I want to transfer my contacts from 3gs to 5s

    Hi, im not able to backup all ma contact to my icloud using my iphone 3gs. only 290 out of 600 contact gets backup in icloud, though i hav enough memory. How to fix it ??

    I have had similar issues backing up to iCloud. Thy only thing I have found to work every time is backing up to iTunes and then doing a restore to my new device. That includes iPhone 6.

  • My iPhone will not automatically backup to iCloud after iOS7 install

    My iPhone 5 will not automatically backup to icloud anymore now that iOS7 has been installed. Steps I have tried so far...
    Installed iOS7 through Software Update - relazed three days later that the phone was not backing up
    Did a manual backup
    Erased the entire phone
    Restored from iCloud backup
    Then reset all phone settings
    Signed out of iCloud, deleted all data and then signed back in
    Is anyone else having this issue after updating to iOS7?

    my dear friend i have like your problem before and when i see alot of solution i find the one it work with me and
    come autmatic again
    take the solution:
    Note that a manual backup also factors into the automatic backup schedule, meaning the next automatic backup will not occur until  48 hours later.
    Actually the iCloud backup process sounds a bit more complicated than it actually is in practical use. You can’t schedule iCloud backups manually, but you don’t need to do so as iOS takes care of this for you, and it’s designed to be pretty transparent.
    Once enabled, iCloud backups will run automatically whenever the following conditions are met:
    Your device is powered on,
    Your device is connected to the Internet via Wi-Fi,
    Your device is connected to a power source,
    Your device has the screen locked (i.e. turned off), and
    It has been at least 24 hours since the last successful backup occurred.
    In other words, your device may not be backed up to iCloud at the same time every day, but once 24 hours has elapsed the iPhone will make a backup as soon as it is plugged in and on Wi-Fi with the screen off. For example, if your iPhone backs up to iCloud at 10:00 pm tonight, but you don’t plug it in while on a Wi-Fi connection until midnight tomorrow night, the next backup will occur at midnight—basically as soon as you plug it in—and future backups will continue to run at midnight on subsequent days as long as the iPhone is plugged in, connected to Wi-Fi, and has the screen off at that time. If you’re working an irregular schedule and coming home at different hours, this may gradually push the backups to later at night, but the backup won’t be skipped if you miss the time window—it will still occur as soon as possible once all of the other conditions are met.
    This does of course mean that sometimes backups can get pushed to the point where they may be delayed until the next night; come home at 10 a.m. on a Sunday morning and plug in your iPhone and that’s when your next backup will occur, but if you leave for work on Monday morning at 9:00 am and your phone isn’t plugged in and on Wi-Fi while at work, you won’t get another automatic backup until you get home and plug it in later that night.
    You can check the time of the last successful iCloud backup by going into the Settings app on your iPhone and choosing Storage & Backup from the iCloud section.
    You can also tap the “Back Up Now” button from this screen to create a manual iCloud backup at any time. To create a manual iCloud backup, your iPhone only needs to be on Wi-Fi, it does not need to be plugged in or have the screen off.
    Note that a manual backup also factors into the automatic backup schedule, meaning the next automatic backup will not occur until  48 hours later.
    This can be one method for adjusting to a specific backup time if you really feel the need to, but it’s largely unnecessary as iOS should naturally settle into a standard backup routine as long as your iPhone is regularly plugged in and on Wi-Fi for at least a few hours each day, such as while you’re sleeping.
    As one last note, it’s also worth keeping in mind that the iPhone only needs to be connected to power with the screen off to start an iCloud backup; once the automatic backup has started, it will continue as long as the iPhone remains on a Wi-Fi connection, even if you unplug the iPhone or begin using it.

  • Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

    Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • ICal Lion: accepting invites does not add to default iCloud calendar

    I receive an invite in iCal and double click the .ics file or drag it into iCal. When I accept the invite by clicking the notification button -> Accept it adds the event to my calendar but with an orange dot. I have two calendars, both on iCloud: Work (Blue) and Home (Green), I do not have a calendar that is color coded to orange and never have. When I click Get Info on the event I just added it says that it's assigned to my default calendar which is Work on iCloud. The problem is that it is NOT assigned to that calendar and does not sync properly over iCloud to my iPhone. I have to go into "Get Info" and select my Work calendar again, even though it's already the selected calendar. Once I do that the "Apply" button appears. I click Apply and it then changes the dot from orange to blue, and everything syncs correctly to my iPhone over iCloud. I have to do this EVERY TIME with every invite I accept. My understanding is that it should automatically assign it to my default calendar, but it is not.
    Is anyone else having a similar issue?

    I have this problem too.  I am using two calendars one for work and one for personal and I can never seem to get calendar invites to be accepted into my Personal calendar.  I have my personal calendar set up as my default calendar but everytime I accept an invite it goes into my work calendar which is shared with other people.  The only way it works is if I create the invite from my end and select the calendar it should go into.

  • When I add an event to my ipad it does not get synced with any other calendars on my other devices.

    My calendar on my ipad will sync with any information added on my android phone or on my PC but if I add information directly on my ipad it does not get added to my PC or phone.

    Do you have iCloud?
    As it states hereyou need it tp sync.
    Allan

  • HT4859 My iPhone does not back up with iCloud.

    Hi, my iPhone just does not back up with iClouds, even trying manually. Don't know why, tried everithing, it just start the proces and says: "calculating remining time" and stays there forever. Anyone know something about?
    I even upgraded the iCloud back up space (was close to the five gb)
    Even-thought my iPad works perfectly with iCloud using the same account. 
    Thanks!

    Go to Settings>General>Usage and see how much space is available on your phone (listed at the very top).  The pop-up might be telling you that you don't have enough space on your phone to perform the backup, not that you don't have enough space in your iCloud acount to store the backup.

  • I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, until the next time I need to use it and it does not get recognized again. Is there any fi

    I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, starting the vicious cycle again: i need to use the password, it does not get recognized three times, then the system asks me to change it again, and again, and I am stuck!! Is there any fix for this "glitch?

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

    I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

    I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

  • G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11

    Hi,
    G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
    I am creating an independent AP Invoice, there are two issues:
    1. On line level G/L Account field is not open for selection
    2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
         In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
    Need help its urgent.
    Thanks in advance.

    Invoice is Item Type.
    G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
    Issue seems to be on AP side only.
    As required please find attached the screen shots.
    JEwith mapped GL Account on Warehouse
    JEwith different GL Account on line Level via Form Settings
    Thanks & Regards
    Sonil

  • I am part of a family sharing setup.  Can I have my own payment method so the organizer does not get charged for my purchases?

    I am part of a family sharing setup.  Can I have my own payment method so the organizer does not get charged for my purchases?  If so, how do I set this up?

    Yes.  Just redeem gift cards so that your own account always has a sufficient credit balance.  Here is how it works:
    Family purchases and payments
    After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

  • From pages on a mbp running 10.9.1, pages 5.0.1 does not sync automatically to iCloud after a doc is created and saved. I have rebooted and reset all devices.

    From pages on a mbp running 10.9.1, pages 5.0.1 does not sync automatically to iCloud after a doc is created and saved. I have rebooted and reset all devices.

    Welcome to the Apple Community.
    What exactly do you mean by 'it doesn't save'.
    Does this mean it doesn't save at all, doesn't save to the iCloud folder or doesn't sync with other the devices or iCloud.com.

  • Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes.

    Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes, have tried restore mode & DFU mode. Bad battery or port?

    iPhone not appearing in iTunes

  • I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

    # Question
    I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Audigy 4 Pro - I/O Hub does not get any po

    Hello all,
    I purchased an Audigy 4 Pro a few days ago and I cannot get the external hub to power on.
    This somewhat sumarizes what I tried so far:
    . Uninstalled all drivers and software of my old Soundblaster Li've 5. Platinum
    2. Also removed all entries of the old soundcard from Device Manager
    3. Powered down the PC fully, took out the Li've 5. and powered it back on and logged on to my Windows XP (SP2).
    4. Just to be sure before installing the drivers for the Audigy 4 Pro I cleaned out the cookies, temporary internet files, all other Temp folders, the Prefetch folder and also ran a program to clean the registry.
    5. De-activated my Norton AntiVirus Corporate Edition's Real-time protection, it's services and also my ZoneAlarm Pro from starting up the next time I reboot Windows.
    6. Powered down the PC again, took the power cable out, made sure there was no power whatsoever left and carefull inserted the Audigy 4 Pro card in an empty PCI slot.
    7. Connected the larger AD_Link to the card, then to the hub
    8. Connected the smaller AD_Link to the card, then to the hub
    9. Finally connected the power convertor cable to a free systems power unit
    0. Double-checked the entire hardware setup a few times and power the PC back on
    . Windows XP detected and installed the OHCI Compliant IEEE 394 Host Controller and the 394 Net Adapter
    2. Canceled to proceed looking for a driver when it found the Audigy 4 Pro card
    3. Installed the drivers and applications that came with the Audigy 4 Pro. Everything went smooth - no error messages during the installation.
    4. Rebooted PC after prompting to do so.
    5. With ZoneAlarm and my Norton Antivirus de-activated, all drivers and programs installed properly the external I/O hub does NOT get any power. I also made sure to check this with the remote control.
    I have ofcourse no sound coming out that hub when plugging in my headphone and also cannot use my microphone.
    6. I ran the Diagnostics program that was installed automatically with the other Creative applications: It claims there aren't any problems.
    7. Powered down the PC again, checked all connectors, powered the PC up again: Same problem... no power.
    8. Installed the latest 4-in- drivers found on viaarena.com: Same problem
    9. Uninstalled and reinstalled the drivers and applications: Same problem
    20. Uninstalled and reinstalled the drivers and applications after taking out all other PCI cards and placing the Audigy 4 Pro card into an other PCI slot: Same problem
    2. Set my BIOS to factory defaults: Same problem
    22. Formatted the PC and reinstalled Windows XP (SP) with every update thinkable... Same problem
    23. Formatted the PC AGAIN ( ! ) and reinstalled Windows (SP2) with updates .... Same problem
    Another problem: Sent a detailed e-mail to Creative Support Europe.... Still NO respons after 48+ hours.
    Anyone else should have a solution I would appreciate trying out, or if all fails I'll go for a Terratec model.
    Thanks in advance!
    PC Stats: Asus A7V266 - VIA KT266 Chipset (VT8366 North Bridge with VT8233 South Bridge) / BIOS version: 0 / AMD Athlon .4GHz / 52Mb
    Message Edited by HilTek on 07-05-2005 :04 PM

    Amazing, I got mine about 3 days ago and have been pulling my hair out trying to resolve the same problem. I have checked power connections, reinstalled drivers. I think something is wrong with the box. I tried to call support yesterday, which was a Saturday, but they aren't available til Monday. I guess I will call them Monday. Let me know if you find anything out in the mean time.
    Thanks
    John
    AMD Athlon(tm) 64 FX-57 Processor
    A8N-SLI Premium
    NVIDIA GeForce 7800 GTX
    GB RAM
    WIN Pro x64

Maybe you are looking for

  • Is there a way to delete an email on my computer and have the same message disappear on my phone and tablet ?

    Please can someone explain how to configure my messages to delete from my Samsung laptop, and at the same time have them disappear from my Samsung Galaxy Tab 2 and my Samsung Galaxy 111 Phone. I am using Windows 7 64 Bit and can't keep up with the hu

  • Include file

    Hi, I have say 4 jsp pages. One page (A.jsp) is sort of a controller. It defines different kinds of variables. The other 3 jsp pages (say B, C, D) are included in between the code in A.jsp (using @include file..) depending upon some kind of condition

  • Macbook screen fades

    HI All, I have a new unibody macbook. Periodically the screen fades to almost black (like it goes before starting front row). It doesn't seem to be related to key combinations or whether powered/ on battery. It is still awake and some period later (u

  • Ca I stop TM from formatting external drive prior to backup?

    I bought an external drive to backup my Mac and my Pc. It is formatted as Fat32, acceptable both to Mac and Pc. When I tried to use Time Machine it asks to format the external drive -- which means it will be formatted for Mac only. Is there a way to

  • Smartforms: vertical lines

    Hi How can i do to have vertical lines between columns in a table node for all main even if i have just one record in the table data? The same problem how can i solve using loop and template instead of table? Thanks lot. Matteo Vernile.