HT5824 my ipad disabled after I closed it. I turned it on said ipad is disabled? Since 10S7 this has been an ongoing problem. I have not even touched the password it just disables on its own
My Ipad was disabled after I turned it off. I turned it back on 'ipad is disabled' connect to ITunes!
Why would it disable afer turning it off. I did not have a password issue. Not even once.
I have not synced on Itunes on my system sincen this Ipad was synced at the Apple Store.
Is there a way to connect on my pc to my Ipad from Icloud and restore my Ipad without loosing
everything? Or do I need to reset yet again. This would be the fourth time starting from scratch!
I had been Ipad replaced recently due to numerous problems with IOS7 including bluetooth problems
with my keyboard, freezing - crazy making issues and most importantly I lost all data on my pages
app and all contacts etc. and my ipad disabled itself after begin turned off!
Now with the new one, my same problem! What is going on? What am I not getting.
Prior to I0s& my Ipad performed beautifully. Now I do not feel I can trust this technology.
Any ideas?
Read this Apple Discussion Thread and possible solutions. The audio jack has been the main culprit, also certain sync and automation settings including connected remotes.
Similar Messages
-
My ipad has stopped updating apps. It doesn't even ask for password, it just oges to the apps screen showing empty progress bars. I've re-synced account and restarted but with no luck. Other than deleting the apps is there anyway around this?
OK. I will work backwards.
You certainly don't want to have to delete apps every time that they need an update, for any number of reasons. Losing data first and foremost would be a drag, but the overall hassle would be absurd. All things being equal, you should be able to update apps in the future after you delete them and reinstall them. I delete and reinstall apps all the time and I am also able to update them when updates are available for the apps. I just wanted to know if you had any success in any fashion installing apps.
Resyncing/refreshing the Apple ID/iTunes account wouldn't seem to be the issue either if you can download apps or other content from the iStores. Your ID is being accepted.
That leaves us with I'm not sure what. But I think I would try this trick fix and see if it helps.
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again. -
Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
Does Premier Elements 13 work with Windows 7?
Thanks
TerryPremiere Elements 13 absolutely works with Windows 7!
In fact, I'd highly recommend you download the free trial and give it a test run.
Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements. -
I have iPhone4. It has been working fine. I have not rebooted my phone lately, so I just deleted a few apps and thought I would do a soft reboot. I held down sleep button and home button. It shut down and apple logo came up as it has before, but it has been about 25 minutes and phone has not come back up. What's going on? Help!
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
i need help and i have the new itunes thing ready to be installed but it just doesn't install. it says that it encounters problems so it stops. what can i do?'
You'll need to contact iTunes support then as it says.
http://www.apple.com/support/itunes/contact/
B-rock -
So it has been a couple months now since I last cleaned up my bookmarks toolbar. And I could remember a couple of bookmarks tabs I wish I did not delete. I found some articles saying I could try restoring previous versions of my bookmarks from the dates of recent system restore points. But the earliest date I found was of only last week's. I've checked everywhere in my Firefox profile for anything that I could restore to date back into that time, but they too only tracked back as early as last week. I believe the automatic backups Firefox had made during that time has now long been deleted from the system in order to make room for my most current ones. How am I going to be able to retrieve those bookmarks when their aren't any backups available now to restore from?
If you do not have backups of your bookmarks, either in the bookmarkbackups folder or saved elsewhere, then you can't restore your bookmarks.
For future prevention: http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox -
This has been happening when I'm on Facebook and playing games. It just freezes up and not even the cursor moves. I have to hit Ctrl Alt Del in order to disconnect and reload. Every time it happens I have sent report , but nothing seems to help. Yesterday I went and I cleared out all my cookies to see if it would help; but today it's impossible.
Gilunick
the behavior you are reporting can be many things...so lets start asking a few questions. Did you remove or add anything to your computer before all this started ?...can you temporarily disable your anti virus and try again? is IE ( internet explorer ) working fine? -
After the app would not download I tried to reinstall several times. I keep getting a popup that says to go to iTunes and synch to install but this has been no help.
Do you have enough room on your iPad for the app?
Has the app downloaded to your computer/in iTunes?
In iTunes, is the app selected as one to be synced to your iPad?
MotionMan -
The iPad says disabled connect to iTunes. When connected to iTunes it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
When I use the keyboard on my iphone 5, the keyboard takes a mind of its own. If I press a letter sometimes it puts the letter twice. It puts periods when I don't want it to and if I hesitate, the keyboard starts erasing everything I just typed. Is there a setting I need to change to make this go away?
What user troubleshooting have you tried? The user troubleshooting steps are restart, reset, restore from backup and restore as new. Usually a reset will fix most of the unusual actions by the device.
-
Ipad frozen after itunes closed during download....any suggestions
ipad frozen after itunes closed during download..........any suggestions?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
-
My iPad says it's disabled. I have not entered a wrong password let alone many times. It turns on this way. I need my iPad ASAP I am a college student and this is how I take notes. I don't have iTunes to plug into right now, any suggestions?
If it's showing the disabled screen then it will need to be connected to a computer's iTunes in order to reset it back to factory defaults (you can then restore to your last backup) : iOS: Forgot passcode or device disabled
-
The Character Pallett repeatedly opens on its own and crashes
Starting this morning I am being driven crazy by the Character Pallett launching unexpectedly on its own and then crashing almost immediately. Then it attempts to launch again, flashes briefly on screen, and crashes again. My crash log shows the same repeated process.[Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Invalid parameter not satisfying: (index >= 0) && (index < [_itemArray count])']
It's pretty impossible to get anything done. I tried reinstalling OSX combo 1.6.8, but the installer would not see my startup drive as being eligable; I then reinstalled Snow Leopard 10.6 and attempted to update to 10.6.8 that way. But this attempt lead to an error that cancled the install. So now I am running 10,6, but with many apps that require 10.6.8. And the Character Pallett keeps poping up and then crashing even with 10.6. I'm beginning to think it may be a hardware problem, either ram or logic board issue; but I lack the diagnostic skills to figure it out.
I thought of trying to launch the Character Pallett on purpose, but when I open the System Preferences and click the box that would place the Keybaord icon in the menu bar (which is the only way I know to get to the Character Pallett) the icon doesn't appear. The check mark doesn't even stick.
And help would be greatly appreciated.Where I am so far:
1. First I should correct the term I was using. It's tje "Character Viewer" and not the Character Pallett. To access the viewer one normally opens System Prefs>Keyboard and clicks on the box saying Show Keyboard and Character Viewer in Menu Bar. Once in the menu bar, one can access the viewer via a pop down menue item. But I did not have the Keyboard in the menu bar and the viedwer was poping open on its own. I couldn't even get the keyboard menu to appear in the menu.
2. I took the advice received so far and booted into Safe Mode, trashed the plist item. The viewer popped open on its own still, but did not immediately crash. I could click on the red window controller and close the window. In safe mode I could get the keyboard menu to appear and could select the Character Viewer.
3. I removed off all my log in items—the only odd thing I noticed was the duplication of iTunes helper. At this point I still could not upgrade from 10.6 to 10.6.8 via the combo updater. So I rebooted normally, but with no log in items. The System Pref for showing the keyboard menu item still did not work. Nor could I upgrade to 10.6.8 with the combo updater. I also tried update just to 10.6.1, but got the same Installer error. But the Character Viewer popup/crash is gone, but so to is access to all the iLife apps that require 10.6.8. iTunes, for example cannot see my iPhone or iPad when they are plugged in via usb.
So I guess I should thank yuou guys for your help andnow post a new question about not being able to upgrade Snow Leopard. Perhaps there's already been a similar problem posted. -
My MacBook Pro 10.6.8 prompted me of a new itunes update this morning, so i downloaded it. Since then itunes has been starting up randomly on its own, and starts playing the first song on the list. I pause the song, and it resumes it on its own again. I'm not joking. So, I end up quiting out of itunes; but, it starts right back up again on its own. After quiting out of the app a few times, it eventually stops reopening; however, about an hour later (or less) it opens again. HOW DO I MAKE IT STOP? I'm just about to delete itunes, because I've had enough of this crap. I hope someone can help. I've restarted the laptop, and it seemed like that fixed it, then itunes started up doing the same thing again an hour later. ituneshelper is unchecked; bluetooth is off; i only have speakers and a mouse plugged in (also charger).
Read this Apple Discussion Thread and possible solutions. The audio jack has been the main culprit, also certain sync and automation settings including connected remotes.
-
Can anyone from APPLE help us? Just recently the ipad 2 has been disconnecting itself. WE have had NO issues for 1 year. All other Apple products in the house are running fine from same router/wifi. Did Apple suddenly do something to ipad that is causing this disruption??
You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
Can't send text messages (can only recieve). How do I change Service Center Number
Hello. As my subject states, i can't seem to send text messages (but i can receive them). I'm told by my carrier that i need to change my service center number (and they provided it). I've been looking all over the phone for this option, and can't se
-
Post Creation/Installation Document.
Hello, Is there any formal template for a document, Post Creation/Installation of Oracle Database? As in Control File Locations, Log File location, Environment settings, etc. etc. that is required to be maintained after installing the Oracle Server o
-
X220 DP++ port to multiiple DVI-D monitors?
Hi all, Would be grateful for your advice. I want to use my DP++ port on the Lenovo x220 to 'drive' two 24" DVI-D LCD monitors showing separate images. It's not for gaming, only for boring office apps. I can't work out from the displayport.org websi
-
Package javax.servlet not found in sdk 1.4.0_01
Hi, Please correct me if i'm wrong. I was using j2sdk 1.3.1 (standard edition) and have recently upgraded to j2sdk1.4.0_01. I can't find the javax.servlet package in the API. I referred to the j2ee sdk and found the package there. Does it mean that I
-
Reason in Goods Movement Screen
Hi all, I want to Enter some fixec reasons in the goods Movements Screen(mb1a). The Reasons One reason for Over Issue , another one Good Material Return to W/H, and last one from Return of Defect Material Is it Possible to alter SAP Standa