HT5848 How do I listen to iTunes Radio and play other game/apps at the same time? On an iPad.

Just got an iPad air and last night was able to listen to iTunes Radio and play some apps at the same time. Now today a software update, and no go on doing radio and apps at the same time....help!!!

Anytime you open an app that has a persistant sound stream - a movie, a podcast, some games - it will overide the music app's stream. nothiong you can do to change it.

Similar Messages

  • How to input/output a digital signal and acquire an analog signal at the same time?

    Dasylab, version: 8.0.04
    Acquirement Card: PCI1002L
    When I use DasyLab to acquire the analog signals is no problem without digital inputs and outputs,
    and when I use DasyLab to input or output a digital signal is no problem also, but when I do that at the
     same time, DasyLab tell me the rate is too high and stop.
    so, I searched the manual book1 (user guide) for that, it showed me :
    To internally equalize measurement time and system time in the analog input, digital input and counter
    hardware modules, use the following settings:
       Synchronization: PC Clock
       Sampling rate: <= 5Hz
       Block size: =1
    the problem is, if I set the Sampling rate to 5Hz, the speed of the acquirement datas is not enough for my
    application.
    so, how to improve it? who can give me a example programm for me. thanks!
    by the way, I come from China, my English isn't good, I'm sorry.
    Allen, China.

    Hi,
    Have things changed over the years?
    I need to syncronise a digital output (Modul NI9474) and an analoge input (AI-Modul NI9203) module. I need to measure time intervals from a flank in signal A to a flank in signal B. I would like accuracies of the order of 1 ms. Currently, the signals are not synchronised, with errors of the order of 2 times the block length (block size x sample rate), sometimes much higher. The best I got so far was a block size of around 20 with a sample rate of 1 kHz.
    If I use the master and slave settings on the RTSL settings, my program doesn't run properly.
    If I use digital signals for input and output, I can syncronise them with RTSL settings and everything is good, but I can't always do that.
    Also, if I do anything in the GUI (such as scrollowing something or going to another window), my output gets screwed up properly.
    1. What can be done to synchronise AI with DO?
    2. Is there something that can be done to avoid messing up the output when something happens in the user interface? (I know that I am messing up the outputs as they make some valves switch and that is loud).
    Thanks in advance!

  • How can I listen to itunes and play a game at the same time on my ipad 4?

    How can I listen to itunes and play a game at the same time on my ipad 4? This means I need to run 2 apps at the same time itunes and my game.  The game has its own sound control so I can turn off its sound while i listen to itunes tracks.  But I don't know how to set it up so the ipad does both.

    Anytime you open an app that has a persistant sound stream - a movie, a podcast, some games - it will overide the music app's stream. nothiong you can do to change it.

  • HT3291 Does this work when listening to radio direct on apple TV? I would like to able to play the radio on apple TV & airport express at the same time.

    Does this work when listening to radio direct on apple TV? I would like to able to play the radio on apple TV & airport express at the same time.

    Welcome to the Apple community.
    No, this doesn't work directly from the Apple TV. However if you play the radio station from your computer you can send it via airplay to both devices, thereby achieving what you require.

  • Can i listen to i tunes and use another app at the same time on ipad 4 ?

    I've been trying to figure out how to listen i tunes, or listen to music on a web music site, and play a game at the same time, is that possible to do on an iPad 4 ?

    I can listen to Tunein Radio and play Coin Dozer and Burst Bubble at the same time.
    I can also play music on iTune an play Coin Doser and Bubble Burst at the same Time.

  • When in i-tunes 11 mac, how do i search for a song as well as a genre at the same time?

    when in i-tunes 11 mac, how do i search for a song as well as a genre at the same time?

    If you mean searching for a song that you already have in your Library, then you can select "Music" first. Then, go across horizontally to Genres and select that; then by using the drop-down menu found under "View" & (of course) select "View Options"-- you will be presented with a limited # of choices to sort by.
    My iTunes 11.0.5 shows 4 parameters to choose from: Title, Artist, Year and Rating. Then you can sort & finally...
    Enjoy,
    mm~

  • Hello good morning ....how can I have all my PDF files  in Ibooks at the same time in my iPad and my iPhone, Thanks.

    hello good morning ....how can I have all my PDF files  in Ibooks at the same time in my iPad and my iPhone, Thanks.

    That's exactly how it's going to work. Unless you've set up separate iTunes playlists for your devices, the books will be deposited the books section on iTunes, and will appear as PDFs.
    As Gus2259 said, you can use iCloud or Dropbox, or transport it through iTunes via an attached computer, or even use a cable.

  • I was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ?

    i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

    I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

    I asked same question
    Any answers

  • Phone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    Both my iphone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    This post has already been answered. Why are you plugging your own site with an answer that has already been given? Not to mention that the information you are handing out is incorrect. There is no bug, there is no patch, and no one needs to delete any email addresses. If you take the time to read the posts with the correct answers, you will see that the solution is totally different than the erroneous one you have posted.
    GB

  • I can't find itunes radio in itunes 11 unlike itunes 10, how do i listen to itunes radio in itunes 11? Thanks

    Hi guys,
    I've just installed itunes 11.3, and I was wondering how do i access itunes radio like the one itunes 10 had (my old laptop had itunes 10 but it broke so I'm using a different one). I'm in australia if that matters.

    Hi kieranhoare,
    Thanks for using Apple Support Communities.
    For iTunes Radio, see this article:
    iTunes 11 for Windows: Listen to iTunes Radio
    http://support.apple.com/kb/PH13699
    For streaming internet radio as in previous versions of iTunes, see this article:
    iTunes 11 for Windows: Listen to Internet broadcasts
    http://support.apple.com/kb/PH12332
    Cheers,
    - Ari

  • HT4914 I still hear ads when listening to iTunes Radio and I subscribed to iTunes Match .  How can I stop hearing ads?

    I subscribed to iTunes Match and I still hear ads when listening to iTunes radio.  How can I stop hearing ads?

    Also I'm listening to this from my iPhone 5 with update ios7

  • How do I import an iTunes library stored by a different user on the same macbook?

    My husband and I are used to share the same Library and we just have our own playlists. I finally was able to import the my libary from my old Windows computer, but now I face another challenge:
    Now I can only see the music files when logged in as user B (me), but user A (my husband) cannot see any of my music files.
    I feel like I need to move my files to a shareable location, but don't know how to do that on a Mac.
    Then I want to know how I can make sure we do not copy all our music to be twice on the same computer.
    Any suggestions how I can resolve this the easiest way?
    Thanks in advance!
    A hopeless not used to mac-user.

    When I have done this, all I did was network the two machines and copy the contents of the iTunes folder to the other machine, and that's it.
    My understanding (which may not be 100% correct) is that the one file that is absolutely necessary is iTunes Library, and that the XML file is actually a copy auto-generated from the iTunes Library, appearing in a different format only for non-iTunes apps that take advantage of the iTunes Library data.
    As far as I know, if you simply have the Library (database) file and all your original music files, iTunes on that computer should operate as it did on your old computer. I believe that the Album Artwork, Genius Data, and XML files can be regenerated from the Library file. Not sure about the Extras file.

  • Possibility of Apple TV playing one Itunes Library while the computer plays a different library at the same time (Mac)

    The Apple TV is for my son's room to watch his videos, listen to music, etc. off his iTunes library I made for him on my Mac.  I want to be able to listen to my own library at the same time he has his. Apple TV only recognizes the current library open; unless I'm doing something wrong or the stars haven't aligned for me yet, is there a way to do this? I can't run two iTunes at the same time (wish I could). 
    *Note- to teach my son about computers, I bought an old green iMac which will be for his learning venture.  The iMac however does not have wifi (at least not yet).  Perhaps something for you Mac professionals can use to help me whip up a good setup, unfortunately the iMac is slow, not enough HD space, so I don't have the funds right now to open it up and do what can be done.  (If this helps)

    Hi All,
    Same issue here. Just upgraded (?) from the previous version of Apple TV, to the new Apple TV2. Like others here, my main problems seem to be with unreliable streaming from iTunes 10 on my PowerMac (Quad G5, Leopard OSX).
    My original AppleTV had no issues w/the wireless network, or synching w/my PowerMac.
    The network connection from the ATV2 are fine, and have no issues accessing the Apple Store (for movies, TV shows), or accessing Netflix. The access to the internet from my ATV2 is quite robust.
    My problems are with keeping a constant, reliable wireless connection to my PowerMac, via an Airport Extreme wireless router.
    I have tried multiple restarts, reboots, reset ATV2 to original settings, tried different wireless channels on the Airport Extreme, verified I have Home Sharing properly enabled in iTunes,etc, but no luck so far.
    What I'm seeing is when I access my iTunes on my computer, I can see my library, and then if I start to "shuffle songs" I may get 1 to 3 songs to play fine, but then the music stops, and I can no longer access the music/movies/etc in iTunes any longer. When I then go to my PowerMac, it has lost most bars of signal strength on the wireless network (although all other devices show strong signal strength), and I have to Turn AirPort Off, then Turn AirPort On and I then am reconnected to the wireless network with good signal.
    I then go back to the ATV2, connect to my iTunes, start my music, and then 1-2 songs later it again stops playing, and I go through this all over again.
    It seems as though there is something on the wireless network between the ATV2 and my PowerMac that causes it to lose connection, and I have to manually start again. The problem is that the connection is not robust, and only lasts a few minutes.
    Hope this gets solved soon.
    Regards
    Tom

  • HT4437 Can't get iTunes and monitor mirroring to work at the same time.

    When I turn on my airplay on itunes it turns off the airplay from my monitor. I don't know how I've done it before but I sometimes can't play itunes and have it mirror my screen at the same time so I can use the visualizer. Whenever I turn one on, the other shuts off. I've done it before. Is there a specific sequence you need to run itunes and have the mirroring work too?
    Ak

    You might try a simple headphone splitter like this:
    http://www.amazon.com/Belkin-F8V234-WHT-APL-Headphone-Splitter/dp/B0000UV2AW

Maybe you are looking for