HT5858 Assistance needed with iPad question.

I know there are certain businesses that don't allow you to save their passwords on the iPad but this question refers to the ones that I have always saved in the past........Although I have always saved them in the past, for some reason I am no longer able to 'save' certain passwords etc. Does anyone know how I can change this so that I am not wasting time re entering information? Is it just something simple that I have to change under the 'settings'? Thanks!

Disable Private Browsing in Safari.
When top is white Private Browsing is off.
When top is black, Private Browsing is on.

Similar Messages

Assistance needed with new monitor and printing from LR3

I just purchased a new IPS monitor. I have calibrated it using the HP Display assistant that came with it. It is an HP ZR 22w. I saved my calibration as a preset - however - this is not appearing as a profile when I try to select it in the print module. the checkbox for "include display profiles" is ticked. If I allow the printer to manage - the pictures are much warmer than on the IPS display. My printer is a canon mg6120 and I am running windows 7. I would appreciate any assistance that anyone can provide. Thank you

I think the "HP Display assistant" is a software tool, is that right?
Ideally with Lightroom, you should use a hardware calibration/profiling tool (Spyder, Eye One, Color Munki etc). In particular, you need a monitor profile that contains colour space information. I had a look through the HP Display Assistant user manual, and it appears the software does calibration but it probably doesn't put colour space info in the profile. It'll be better than nothing, but a hardware tool is better.
However:
I saved my calibration as a preset - however - this is not appearing as a profile when I try to select it in the print module. the checkbox for "include display profiles" is ticked. If I allow the printer to manage - the pictures are much warmer than on the IPS display. My printer is a canon mg6120 and I am running windows 7
This is not what you want to do! The profile that the HP Display Assistant creates is for the monitor, and only for the monitor. It gets the right white point and tone curve for the monitor. What you need in the profile drop-down in LR print module is a printer profile, not a monitor profile (except on very special circumstances).
I'm not familiar with the MG6120, but when I googled "profiles for canon mg6120" I got a lot of hits, so I assume profiles are available. It's quite likely that some came with the printer driver, and were installed with the printer software. When you select "profile" in LR print module (you may well have to go to "Other..." to see them all) then there should be profiles for the printer - possible lots of them - one or more for each paper type. If they're not there, see the Canon documentation (or google it) to find out how to load them.
If you can't find any profiles for the printer, then try using sRGB (or probably it's "sRGB IEC..."). Without colour management, your printer will probably expect sRGB images, so this should be roughly right, but a specific profile for the printer is better. This is one of those very special circumstances when something other than a printer profile (and sRGB isn't a printer profile) may be better than nothing.

Help needed with Ipad (ios7) wifi direct print to Samsung m2070fw

I downloaded the app to the ipad and ran into the snag that the ipad when it tries to connect to the printer via wifi with the provided password when entered fails. It seems to not work due to the wifi not connecting direct from the ipad to the printer (no router used in this setting). I called the Samsung support folks and they had no ready solution but to ask here on the Apple commmunity. Any ideas or key steps I might be missing

Hi there and welcome to the forum. The feature you're referring to is called "Wireless Direct" and both the Envy 4500 and Envy 5530 have this feature. When a printer has wireless direct printing capability it means your WiFi capable devices (smartphone, tablet, laptop) can make a wireless network connection directly to your printer without using a wireless router or access point. This sounds like it would work perfectly in the case of your friend who currently has no ISP. Here is a link to a web page that explains wireless direct printing in more detail http://www.hp.com/global/us/en/wireless/wireless-direct.html
I hope this information proves useful and feel free to post back on the Forum with any other questions.
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Help needed with these questions., plz

Hello Gurus,
1.     In bw 3.5, we have only u201CIntialyze delta without data Transferu201D, u201CEarly delta Intialyzationu201D & u201C Full uploadu201D. How can I do regular DELTA loads using infopackage?
2.     In BI 7.0, we have only u201Cdelta DTPu201D, u201C Full DTPu201D. How can I do initialization of Delta, since we do only full load using infopackage till PSA?
3.      How do we decide if we have to create secondary indexes?
4.         How do you decide on which info object we have to create aggregate. What r the conditions?
Regards,
PNK

Hi Pnk,
1 . Create infopack with Intialyze delta with data Transfer , once this load is done . If you create another infopak then Delta
     will be enabled . Same as the case for 'Intialyze delta without data Transfer' this load will set delta in the source system and the next new infopack will be delta enabled.
2 . Set ur DTP as Delta and execute , the first load will bring all the data which is reciding in the PSA , I mean the first load will
act as Initialization . from second load it will act as Delta .
3. If you have any DSO which is reportable , need to chk hw users are looking at the data , I mean drill downs if they drill
    down other than key fields then inorder to get data faster we need to create secondary indexes
4. try to analyse hw the users are drilling down on data ( In queries/work books), take those inputs and create aggregates on those .
Regards
Santosh
Edited by: santosh on Feb 23, 2010 12:48 AM

HELP NEEDED WITH SOME QUESTIONS

Could ye guys help, I have some questions and I dont know the answers of them! any solutions would be great
Distinguish between composition and inheritance as used in object-oriented programming. As part of your answer, provide examples of different situations in which each would be more appropriate.
What is meant by recursion as an algorithmic strategy in working with abstract data structures, and why is such an approach considered worthwhile? Illustrate your answer with an example sorting algorithm in Java that can be sorted linearly and recursively.
Given an alphabet of {x,y,z} possessing the following frequency distributions {1/8, 1/4, 5/8}, show how this information may be used to construct a prefix code binary tree. Given the code 11000111100, show how this is decoded using this construct.
Any ideas??

086kerry wrote:
lad if you had seen what I had to do already, its not as if I want the answers, just help. I cant find anything satisfactory on the web.Not to quick are ye?
If you can't do more than post your assignment and cry for help then you might as well give up now. Nobody is going to do your work for you. You have done NOTHING yet so start working on it and if you run into problems come back with your code and ask questions about it.

Assistance needed with Substitution customisation

I am currently working on a workflow approval migration Project on SAP ECC 6.0 ,trying to customize substitution process.
I need to enforce end validity date while users are assigning substitutes and based on activity groups/roles , I need to restrict substitution assignment.
End users would use : SBWP and IT team would use RH_SUBSTITUTES_LIST program to maintain substitutes.
I am not able to find a relevant BADI/user exit for the same .I tried WF_SUBSTITUTE ,but its only for UWL.
Please advice.
thanks
Raghu V

I thought my request was rejected, I know i was posting a similar question which was asked earlier , But nobody had confirmed whether standard code modification was the only option .
However , I am proceeding to modify the standard code now .
Solution : I am modifying the Include : LRHW2I01 ( part of the RHW2 function group) to restrict validity end date for a particular substitution profile and a check to ensure the substitute has enough authorizations.

Assistance needed with SG300-10 and QNAP TS-459 Pro II Link Aggregation

All,
As the subject specifies, I have a pair of devices on a local network that I would like to play nicely together.
My problem:
If the TS-459 is configured for standalone (No Link Aggregation), then I can access the NAS via Ping, web interface, NFS, etc.. however, If I try enabling Link Aggregation, then I lose TCP/IP connectivity to it and must use QNAP's Finder utility to change Link Aggregation mode back to Standalone.
What I'm asking is - has anyone here configured a QNAP NAS appliance with Link Aggregation enabled with an SG300 or similar?? If so, could you kindly provide a walk-through on the appropriate settings for each?
My first attempts on the NAS side were to choose the "Balance-alb" (automatic load balance) and "Balance-tlb" (adaptive transmit load balance) - The QNAP_Turbo_NAS_User_manual_V3.4_ENG.pdf states that these two modes are for "General Switches", so I assumed they should work.. unfortunately, no luck for me..
Next up, I tried the IEEE 802.3ad / Link Aggregation setting on the NAS, while the device was rebooting, I configured the two GB ports on the SG300 to be a LAG with LACP enabled. Unfortunately, this too did not work as I had hoped.
I called QNAP support and of course they don't have an Sg300-10 to test with, but will test their TS-459 Pro II to confirm the Link Aggregation settings function as advertised. I hope to hear back from them later this evening. In the meantime, if anyone here has insight, it would be very much appreciated. The NAS and SG300 are for a home lab consisting of a pair of Dual-six core systems with 48GB of mem each for vSphere.
NAS Details:
Model: QNAP TS-459 Pro II
Firmware: 3.4.4 (0718T)
Drives: Seagate 2TB x4
Switch Details:
Model: Cisco SG300-10
Firmware version active image: 1.1.0.73
Thank you,
Burke

Hi Burke,
You can use link-aggregation 802.3AD with the sg-300. Try to make the trunk in the sg-300 with LACP enabled (before you make the trunk, otherwise LACP is disabled and you will only be able to do so by deleting the trunk and add it again). Flow control is enabled in the sg-300 (altough i'm not sure if this is needed). I've got the sg-300 and the QNAP TS 439 pro II+.

Assistance needed with small program for non-profit

Energy Cycle is a small non-profit based in Virginia. We are using labview for a project that monitors 20 dc generators. Looking for someone who might be able to donate a modest amount of time and help us out.

I have 20 years of LabVIEW Experience and I have developed a LabVIEW based HTML5 WebSockets Server that works with simple JavaScript HTML5 WebSockets Clients on Mobile Devices like iPhone/iPod/iPad and Android Phone/Tablet devices. I would be willing to help you out.
I keep a LabVIEW Demo WebSockets Server I have developed running on my desktop online and here is a link to a JavaScript iPhone Simulator I wrote that runs a WebSocket Client Demo I wrote that can be checked out: http://invbapp.com/iPhoneSimulator
Note: Run this in the Chrome Browser because it fully supports HTML5 WebSockets! Also, this demo is a single client version and if a new client connects while you are on, it will knock you off, I am working on a multi-client version.
I bring this up because this sort of technology could be integrated into products or systems to allow control and monitoring from devices like their iPhone.
Best Regards,
George Miles
INVENTEERING, Inc.
317 South 4th Street, Unit 329
La Crosse, WI 54601
Tel: 608-498-4982 or 858-926-5927
Skype:skype.gmiles (Free Internet Video Phone requires Skype™ Software)
Email: [email protected]
Website: http://www.inventeering.com

Help needed with ipad

I have my brothers computer and ipad. Unfortunately he passed away suddenly Jan 3/14 and I am trying to get information from his ipad, but someone has tried the code to many times and it is disabled. I have tried everything to recover the ipad and it does not show up in his itunes. Any advise would be apreciated.
Jeanne

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

Assistance Needed With Creating a Dynamic Query

I am attempting to rename several of my primary key/foreign key constraints from the default "SYS" names to something actually meaningful. I have several "semi-dynamic" queries that look something like this:
SELECT 'ALTER TABLE L_ROLE RENAME CONSTRAINT ' || CONSTRAINT_NAME || ' TO NN_ROLE_ID; ' FROM USER_CONSTRAINTS WHERE CONSTRAINT_TYPE ='C' AND TABLE_NAME='L_ROLE' AND search_cond(constraint_name)='"ID" IS NOT NULL';
Unfortunately, I have to capture the output of this script and run THOSE statements to get anything done.
I would like to convert this to simply use EXECUTE IMMEDIATE or if necessary a stored procedure. Unfortunately, I'm a bit confused on what the end result would look like. Any assistance would be appreciated.
Jason
p.s."search_cond" is a custom function defined as follows:
create function search_cond( p_cons_name in varchar2 ) return varchar2
as
l_search_condition varchar2(4000);
begin
     select SEARCH_CONDITION into l_search_condition
     from user_constraints
     where constraint_name = p_cons_name;
return l_search_condition;
end;
For some reason, just running the query outside the function doesn't work.

OK, try this. Please note that I commented out the actual exec immediate line and instead just dbms_output the commands that will get executed. This way you can try this first to make sure it produces what you expect. Then just put the exec immediate back in when you are ready.
DECLARE
    TYPE cur_typ IS REF CURSOR;
    v_cursor cur_typ;
    v_query VARCHAR2(1000);
    v_exec VARCHAR2(1000);
BEGIN
    v_query := 'SELECT ''ALTER TABLE ''||uc.table_name||'' RENAME CONSTRAINT '' || uc.constraint_name ||
                      '' TO NN_''||ucc.column_name||'' '' thequery
                FROM user_constraints uc,
                      user_cons_columns ucc
                WHERE uc.constraint_name = ucc.constraint_name
                AND   uc.constraint_type =''C''
                AND   search_cond(uc.constraint_name)=''"ID" IS NOT NULL''
                AND   uc.constraint_name LIKE ''SYS%'' ';
    DBMS_OUTPUT.PUT_LINE(v_query);
    OPEN v_cursor FOR v_query;
    LOOP
        FETCH v_cursor INTO v_exec;
        EXIT WHEN v_cursor%NOTFOUND;
        --EXECUTE IMMEDIATE (v_exec);
        dbms_output.put_line(v_exec);
    END LOOP;
    CLOSE v_cursor;
END;
/Greg

Assistance needed with simple java vocabulary program

I need to construct a java program that can read in text documents. The program must then display an image and prompt the user to input the word that best-describes the image. If the user is incorrect, however, the program must tell the user how many letters the word has and what the first letter is.

* @(#)words.java
* @author
* @version 1.00 2010/6/8
import javax.swing.*; //class necessary for GUI
import java.awt.*; //class necessary for GUI
import java.awt.event.*; //class necessary for GUI
import java.util.ArrayList; //import ArrayList class
public class Words implements ActionListener { //ActionListener is required for the button to function
//initialize values that will be used in other methods
int noLetters = 0; //number of letters
String[] words; //words
JTextField textNL; //inputs number of letters
ArrayList<JLabel> list;
public static void main (String[] args) {
     Word s = new Word(); //this is so you are not referencing non-static methods from a static context (main must be static, but the constructor is not)
     s.go();} //runs following method as a method of the object Words s
public void go() {
     //build GUI
          JFrame frame = new JFrame(); //intializes frame, this is essentially the GUI
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); //sets program to stop when frame is exited
          JTabbedPane pane = new JTabbedPane(); //creates a new tabbed panel
          JPanel panel1 = new JPanel(); //creates input panel
          JPanel panel2 = new JPanel(); //creates output panel
          textNL = new JTextField("", 15); //initializes the text field of the same name from the beginning of the program
          JButton button = new JButton("Enter"); //This button will input the data you have entered into the text fields
          button.addActionListener(this); //tells the button to do stuff when it is clicked (see actionPerformed())
          panel1.setLayout(new BoxLayout(panel1, BoxLayout.Y_AXIS)); //Sets frame to display labels and text fields arranged vertically
          panel1.add(new JLabel("Number of Letters")); //this label tells you what the text field is prompting for
          panel1.add(textND); //adds text field to input panel
          panel1.add(BorderLayout.SOUTH, button); //adds button to input panel
          pane.add("Enter Data", panel1); //adds input panel to tabbed panel
          pane.add("Words", panel2); //adds output panel to tabbed panel
          frame.getContentPane().add(pane); //adds tabbed panel to frame
          frame.setSize(400, 400); //sets GUI intial dimensions
          frame.setVisible(true); //displays GUI
          //end of GUI build
}

Assistance needed with hovers

Hi there,
In my project, I have several squares. When the mouse is hovered over these squares, I want them to change colour and when the mouse is taken away, I want them to change back. I managed to achieve this by creating copies of the squares with a different colour, and then showing and hiding appropriately with simple show and hide code, but this caused some problems. Therefore, I am wondering if this can be done via code, perhaps with the :hover CSS selector, or some other means. If so, I would be deeply gratified to know how this could be done.
Many thanks,
Dee Roberts

Hi there, hopefully this will help you out, note that the object who's color we're changing btn.RectangleShape in my example below) has to be a simple shape div in Edge, it can't be a symbol.
Example:
www.timjaramillo.com/code/edge/rollover3_gsap_colorChange
Source:
www.timjaramillo.com/code/edge/_source/rollover3_gsap_colorChange.zip
// code on Stage.document.compositionReady:
// load GSAP anim library
yepnope(
nope:[
          'greensock/TweenMax.min.js',
          'greensock/easing/EasePack.min.js',
          'greensock/plugins/CSSPlugin.min.js',
          'greensock/plugins/ColorPropsPlugin.min.js'
complete: init
//when yepnope has loaded everything execute init();
function init (){
          var coloredSquare = sym.getSymbol("btn").$("RectangleShape");
           sym.$("btn").mouseenter(function(){
                          TweenMax.to(coloredSquare, 1, {backgroundColor:"#938461", ease:Power2.easeIn});
sym.$("btn").mouseleave(function(){
               TweenMax.to(coloredSquare, 1, {backgroundColor:"#000000", ease:Power2.easeIn});

Help needed with iPad pass code

Just bought a new iPad and backed up from my old one.
Now being asked for a pass code but its not accepting the code from my previous iPad
Can anyone help?

If you can't remember the pass code you will have to wipe and restore as new.
http://support.apple.com/kb/ht1212

Urgent help needed with cookie question

Hi guys,
my question is:
if any servlet generate a cookie object ( during http connection, of course ), so it will always store this cookie on the client side ( the user' browser) , which called the servlet ( of course). Is it right? If yes, what happens if the browser doesnt accept cookies?
Thanks in advance, Euclides.

Hi
According to me The values will not store if Cookies are disabled by client untill and unless u do,nt use any other mechanism to store it e.g Session , UrlRedirection
Regards
Saurabh Singhal

Assistance needed with migration from OSMF 1.0 to OSMF 2.0

I am using a third party plug-in for HTTP Live Streaming playback, http://code.google.com/p/apple-http-osmf/
Porting the plug-in from OSMF 1.0 to OSMF 2.0 did not go as smoothly as I had hoped.
A change in behaviour between OSMF 1.0 and OSMF 2.0 is causing us trouble when seeking in Apple HLS streams.
*** The problem ***
Playing a stream where the first segment has a non-zero timestamp, if one seeks for example 10 minutes into the file, the seek will complete instantly and in some cases a single frame from the new time is rendered but the scrub bar and time indicator will reset to zero and count up at a normal rate as if it was playing, then after up to 20 seconds, playback will resume at the new location and scrub bar and time indicator will return to the right value.
*** How to Reproduce ***
Build OSMFPlayer using at.matthew.httpstreaming.HTTPStreamingM3U8NetLoader to provide the video element and modify org.osmf.net.httpstreaming.HTTPNetStream to ignore _initialTime in the seek function.
1) Using OSMF 1.0, the result is a player that plays and seeks normally.
2) Using OSMF 2.0, the result is a player that does not behave right when seeking in streams that have a non-zero _initialTime.
Example of a stream that exhibits this problem: http://fastly.zenzuz.com/streaming/GUSGUS/prog_index.m3u8
*** Codebase / Libraries Involved ***
- OSMF 2.0
- apple-http-osmf svn r11
- OSMFPlayer from the OSMF framework samples
*** Our Observations ***
Immediately after seeking, the buffer level in HTTPNetStream will go far above the configured maximum buffer level, by the seek amount, so seeking 10 minutes into the file will result in a buffer level of a tad over 600 seconds. When playback resumes, the buffer level will return to normal. One of the changes in OSMF 2.0 from version 1.0 is a difference in how the NetStream class is used, OSMF 2.0 uses an extra instance of NetStream for buffering.
*** References ***
Live document on this issue in open Google Docs:
https://docs.google.com/document/d/1TO9oyg8cK5ezSLNkeyCTKdtFA__fDY8g7te2PWt-UTw/edit
Where exactly are the NetStream time codes derived from?

Hello,
You can see following doc id for detailed procedure and instructions
Doc ID: 730365.1 Oracle Database Upgrade Path Reference List
Regards

HT5858 Assistance needed with iPad question.

Similar Messages

Maybe you are looking for