HT5858 I just recieved a new Iphone 5 and I have somehow deactivated the swipe action and now have to double tap every thing. I can not page down to see the complete page. And my phone will not turn off either. Please help me I have just had it for a few
I can not swipe and when i go into general i can not page down to refresh. I have to tap once the tap twice to open up any apps on my phone or the make calls.
Help me please
Tap the Home button three times to disengage VoiceOver.
Turn it Off at Settings > General > Accessibility > VoiceOver
Similar Messages
-
I tried resisting my phone it didnt work. Please help? This is the first time it has ever happens and has been doing it for a week. The sound will only play without headphones or speakers is when I'm listening to my ringtone. And my phone won't turn off. It turns off then just turns back on.
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
Ipod nano firewire error and will not turn off! PLEASE help
I am having the exact same problem as I see may of you unfortunate Apple users are. I am receiving the error message about firewires and I have never used one. The nano will not turn off and I have to let the battery run out. The play/pause function works perfectly fine, but not to turn off the nano. The sleep function does not do anything either. I am so disappointed with Apple because they would not help me on the phonbe since it is well past my first 90 days of ownership. I may have gotten a single drop of water on it, but that was about 2 weeks ago, and still having the same problems. I don't know what to do, but I see that Apple has gotten mighty rich off of their JUNK products! Anyone out there, help me please!
Do a reset. You will not lose any data: Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If this does not help resore from a backup. See http://support.apple.com/kb/HT1414
Lastly try restoring to factory settings.
If none of this works, it's probably a hardware problem. Make an appointment at the Genius Bar of your Apple store. You are under warranty and they will fix or replace it on the spot. -
PC Will Not Turn Off ! Please Help P6N Platinum Mobo
Hey Guys,
I just recently finished building a new PC. Well its not complete yet I used some parts from my Older Dell which I plan on Changing in the near future. My problem is that I got everything set up and the System Runs GREAT! its just when I go to shut down the monitor and peripherals turn off but the case fans and cpu cooler keep on running. Am i missing a driver or is there something in the Bios that I am missing? please help!
System.
Vista Ultimate 32bit
Antec 900 Case
P4 3.4HT processor
80gig Seagate HDD
800xPro ATI graphics
2gig OCZ SLI RAM PC-6400
P6N SLI 650i Platinum MOBO
thanks!
D.Quote
Are you pushing the power button on the case or shutting down via Windows? It may be going into S1 standby.
Quote
Well I get the same Result weather I push the power button or shut down in Vista it turns the screen and keyboard off ( i have g15 keyboard with lcd display) and the case fans still run.
The question is, what your case power-button and the Vista Shutdown function are configured to do.
Make sure the Vista-shutdown-function is really configured to shut down/turn off your computer and not just to suspend it to S1 standby state.
Also, enter BIOS Setup and check that the option "Power Button Function" is really set to "On/Off" and not to "Suspend".
If both settings are configured correctly already, try to set ACPI Standby State to S3 in BIOS and see if the FANs keep running, when you try to turn off your system.
Post your results here.
Also, What BIOS Version are you using? -
Can not turn on touchsmart please help.
I just bought a hp touchsmart laptop to later find out the touch screen isnt working. Touchsmart isnt so smart after all, I looked up touchsmart drivers and installed then and I don't know nothing helped. If someone can help I would really apreciate it.
i looked over this a hundred times before putting the question in.
says:
Tablet PC Settings
(I have no such thing on my laptop)
Activate Windows
(I have no such thing on my laptop)
but the part where it says to disable the graphics card Im scared to mess up the computer is that safe?
But I think I just need the right driver to install tell me if you find a good one I tryed alot already. -
IPOD NANO WONT TURN OFF! PLEASE HELP
my ipod is 3 days old and wont turn off! i bought it in singapore and i downloaded itunes on the computer in singapore and put songs and pictures on it, and it would turn off. the next day i was on the plane and i was listening to it and i went to turn it off and it wouldnt, i got it off by putting sleep timer on so it automatically went off but i couldnt turn it off by pressing play pause button or menu button. i have tried resetting it but wen you reset it you have to turn it off and i couldnt turn it off. everything else workd fine but it will not turn off!please help me its only 3 days old!!
iPod nano 2GB Windows XPThe iPod does not need to be turned off to reset it. Here are the instructions for resetting the ipod. If this fails to do the trick you may want to try and do a restore.
http://docs.info.apple.com/article.html?artnum=61705
Hope this helps -
I can not turn off connect securely. How do i do so and your help page sucks cant find anything
I can not turn off connect
securely. How do i do so it was working fine then i reset fiefox and now i can get on pagesWhich problems did you have that you decided to reset Firefox?
Note that if you have visited pages before on a server via a secure connection then Firefox will prefer to using a secure connection (a reset imports the history).
You can set the Boolean browser.urlbar.autoFill pref to false to disable auto-fill on the location bar.
See "Prevent Firefox from automatically completing URLs":
*https://support.mozilla.org/kb/search-your-bookmarks-history-and-tabs-awesome-bar -
My screen is locked on my 4S and I can not turn off phone
My screen is locked on my 4S I PHone. I can not turn off the phone and everytime I touch the screen Siri reports the action.
Have you tried resetting your iPhone?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks
As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.
-
I am residing in Doha, Qatar (Middle East) and I wanted to buy the unlock iPhone 4S but not sure if the phone will work here... please help... thanks
It does not. It has listed :ATX Connector 24 (20+4) Pin X 1 PC, P4-12V 4 Pin X 1 PC, SATA 15 Pin X 2PC, IDE/Molex 4 Pin X 6
You need something with 2x PCI Express 6 pin connectors.
If you have enough 4 pin connectors left over after hooking up the rest of your computer this might still work though, if you use some adapters. They require two 4 pin connectors to power one 6 pin. I recommend looking inside your computer and figuring out which connectors you will need.
I work on behalf of HP (But this isn't my job)
Mark my post as “Accept as Solution" if you feel my post solved your issue, so that others with the same question can find the answer.
Please give me Kudos if I wrote something that helped you. -
My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off.
Please if anyone has any idea that I do, let me know.
thanksReset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: You have to hold 2 buttons down together. -
I set up Keychain and do not have access to the telephone I gave. Now I can no longer connect my ipad to my windows computer, itunes does not automatically open when I plug in the USB. I can not turn off Keychain in my ipad since authorization is pending awaiting the code sent by SMS, which I can not get. Can someone advise how to get rid of Keychain. Should I cancel my icloud account?
I appreciate your help.
Have reset the ipad, but that changed nothing. I can not turn off Keychain, iit remains "pending approval". Probably, the only thing to do is to close my icloud account...which I hate to do since there is a lot of data saved there. But, I am unable to back the ipad up on my Windows 8 computer because itunes no longer opens when the ipad is attached.
Oh well...computers are computers and it is impossible to cover 100% of the situations.
Keychain iss not the best app for someone who lives in 3 different countries.
Thanks -
trying to veiw videos from a website that requires me to download firefox and silverlight.My imac osx 10.5.8 will now download firefox. firfx tells me my mac is not compatible with ffox Please help me ? Thank you
There is a version of Firefox 4 available for PPC Macs:
TenFourFox 4.0.1 Firefox 4 For PowerPC Browser Released
Version 4.0.1 of TenFour Fox, FloodGap's port of Firefox 4 for Power PC
Macs that supports both Mac oS X 10.4 and 10.5. has been released.
Mozilla.org dropped support for OS 10.5 after Firefox 3.6 and for Power
PC with the fourth beta of Firefox 4.
TenFourFox uses almost all the same code as Firefox 4 and has nearly all
the same features, including faster JavaScript, WebM video, and HTML 5
and CSS 3 support, as well as new and emerging Web features, but with
the code needed to keep your Power Mac functional and fast. Out of beta
and it's ready for action, versiob 4.0.1 is a performance, security and
stability update incorporating Mozilla's Firefox 4.0.1 plus AltiVec acceler
-ation for WebM and browser graphics, and G5 JavaScript acceleration.
For more information, visit:
http://www.floodgap.com/software/tenfourfox/
Source: from http://www.applelinks.com - posted April 25, 2011)
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
With SilverLight, Microsoft attempted to create their own version of what a replacement for Flash could be - but not to universal acclaim. You can read more about it here:
http://silverlight.net/
So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards) if you are using a PPC Mac, but even this will not work with Safari 4. Version 2 only works with Intel Macs and does work with Safari 4/5. The solution is to download and install the latest version of Flip4Mac, which now includes a Silverlight component:
http://dynamic.telestream.net/downloads/download-flip4macwmv.htm
But the latest news is that Microsoft will probably abandon Silverlight in favour of HTML5:
http://www.appleinsider.com/articles/10/10/29/apples_ios_pushes_microsoft_to_dia l_down_silverlight_for_html5.html and
http://www.bbc.co.uk/news/technology-11673384 -
i just changed my iphone 4s and received another one as i was still under my one year warranty, and now when i play music via headphones there is a volume limit on it, i have tried to turn it off but it wont turn off someone please help>>>
Hi kingminjing,
Have you checked your Control Panel to make sure you don't have the flashlight turned on?
Swipe up from the bottom of the screen and make sure the flashlight icon (bottom left-hand corner) is not white. If it is, tap on it to turn it off.
Cheers,
GB -
iphone 4s screen black but is still on. Tried reset, can not turn off Find my phone because i have a passcode
dont you know your apple ID password ?
IF you know that, try restart your iPhone if it doesnt work try restoring your device. If it doesnt work again, you have hardware problem. Try changing your screen. -
That did not help me find out needy iPhone will break Icloud account for Iphone his serial number (DN******TTN) for I am I can not activate buy user please help
<Personal Information Edited by Host>Your question isn't at all clear. Is this a second-hand phone which has been locked by the previous user? In that case only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
If you unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all.
You should if possible return it to wherever you bought it and ask for a refund as in this event the device is completely useless.
You should not post serial numbers or any other personal data here; I've asked the Hosts to remove it.
Maybe you are looking for
-
I can't see my pictures in teh finder using Quick look or Cover flow
I have iPhoto8 installed and it works fine, but I cannot get a look at my library of photos without opening iPhoto. I thought I was supposed to be able to use the finder and cover flow to see my pictures quickly to find the one I wanted without openi
-
Requesting help with using "doc.newPage" ...
Hi, I am using Acrobat Professional 8.1.2 and I would like to add a blank page to an open document. Is there anything wrong with the following Javascript code: // Insert Blank Page app.addMenuItem({ cName: "Insert Blank Page", cParent: "Tools", cExec
-
CF8 string replacement of \ with ' generates errors ?
Hello, I have been banging my head on this CF8 issue for too long now. I have a string that is of the form [~]'trespes[~] where I need to replace [~] with the escaped backslash \ I have tried coldfusion replace, and java ReplaceAll but whenever I
-
2 gb datafile vs 16 gb datafile
Hi, We are considering to move one of the databases from 2gb datafiles to 16 gb datafiles like other database. All the datafiles are on the same location so there is not load balancing. The size of the tablespaces are from 10gb to 35gb. What's better
-
I am a photographer who's been asked by a client to construct a live video feed through the camera that does not impair my ability to shoot at the same time. So I'm mounting a small pen sized camera to the ground glass( or eye piece ) on my camera fe