HT5868 Update software for the Mac and now my phone keeps asking the Trust Computer question. I tap trust and nothing. It asks me repeatedly
My phone will not allow me to connect to my computer. It asks me repeatedly if I "trust" the computer and I tap trust each time; and nothing. I did upgrade the computer to Snow Leopard yesterday and was able to connect the Ipad mini, but not the phone.
I finally was able to solve my problem. I'm not sure why it happened but after updating my iPad to the most recent iOS, it works just fine. I had iOS 8 before, but it was the first release, not the update. I have the latest iTunes on my computer so maybe they weren't compatible. Anyway, if anyone else is having this problem, make sure everything is up to date.
Similar Messages
-
i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on
Did you try to connect in recovery mode to your computer, explained in this article?
iOS: Unable to update or restore -
I tried to update and now my phones frozen with the itunes symbol and wont restore. What do i do?
I tried to update and now my phones frozen with the itunes symbol and wont restore. What do i do?
Did you try to connect in recovery mode again? iOS: Unable to restore
-
Like a fool I tried to download the new software for my 3GS. Now oI can't get the dam thing activated. I'm in Portugal but my phone originates from the UK. Help.
I actually interpreted this as a carrier lock issue. If that is the case the OP needs to contact the UK carrier who owns the rights to lock the iPhone. Only that carrier can unlock it.
Was the iPhone unlocked by means of jailbreak software? If that is the case, then the reply from Phil McCafrey would apply to this as well. -
I have just updated my iPhone4s to ios6 but now my phone keeps freezing and my apps freeze and close why is this
try a reset hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
-
I downloaded the ios7 and now my phone keeps freezing why?
i downloaded the ios7 and now my phonw keeps freezing and powering off, why? how do i fix this?
see if this link helps http://support.apple.com/kb/HT1808
-
i upgraded my iphone 4 ios and now my phone will not restore -
I have run into the same problem.
1. I was sharing the same itunes account with my wife for both of our iPhones 4s. She upgraded her phone to IOS7 two weeks before I did. After I did we ran into problems with messaging. Because we shared itunes account, both iphones were linked. When I sent text messages to someone, she got a copy. When they replied, she got a copy. I tried several ways to remove her phone from my profile, but would not work with new IOS7. I had to create a seperate itunes account for my phone in oirder to do so, as recommended on several help forums.
2. I backed up my phone onto itunes before setting up seperate itunes account. It showed that all the photos, contacts, notes, apps, etc. were synced and backed up.
3. I logged off itunes (former shared account- now wife's account), logged into new itunes account, and proceeded to restore my phone, while logged into my new itunes account, thinking this would delete my wife's phone from the profile as shared devices.
4. Phone would not restore by automatically syncing with itunes, by selecting back up recovery file to recover, or even by deleting everything and starting fresh as if it were a new phone, then trying to restore the data file as if it were recovering the backup info onto the new phone.
5. I get the same **** initialization loop sequence on the iphone every time, even after itunes goes through the recovery process, syncing all data, etc., multiple times. The iPhone loops through the grey screen "Welcome" in different languages, then asks which wireless server I want to connect to, enter passcode, then asks if I want to set up phone as a new device, backup from iCloud, or from iTunes backup. It does not matter which I select. It prompts me to connect to iTunes again. The point is, I have already been through these procedures and the iPhone cannot get past this point and enter run mode, showing me a screen with all my recovered settings.
For time being, just to have a functional phone, I have had to delete everything off the phone and set it up as a new device, back to factory settings. Then the phone will get past this and enter into run mode showing screen and apps with factory settings, no contacts, no email ( have to set up again), no voice mail ( have to reset).
Any ideas on how to over ride this reset mode in the iPhone, when all I want to do is download and recover settings from a backup in iTunes to the device? -
Although in my System information it lists my Mac as running OS X 10.9.5, it was not the case. My system was running browsers in an older version. When I asked for support, I was pointed to Recommended Articles about updating and installing software and firmware for my Intel-based Mac, however the pages say that they are out of date and no longer updated by Apple. Any suggestions? I have a Mac 20" Fall 2007 model.
When using the About this Mac selection from the Finder menu below the Apple icon,
in the little window of that name, when you click the information immediately below
the OS X, that should say Version 10.9.5, then click the same place again, and Build
number (may vary) should appear; click a third time and your product Serial number
appears. You can use this information to help correctly identify the OS X & build series.
Also, the total of memory RAM installed, appears; so does the processor specification.
•How to Know Which version of Mac OS X my computer is running:
https://it.uoregon.edu/node/3320
•How to identify iMac models - Apple Support
•Identify your Mac - Lookup by serial number:
https://www.powerbookmedic.com/identify-mac-serial.php
There are other places to look in the running system, to tell if you may have a second
system, a different partition, or other questionable action going on. There is a way to
use the command line in Terminal to see what is going on, and other less complex ways
for a lay-person who is not experienced, to look at some information reports that can be
generated. One of them is the etrecheck report. It will show what is in the computer. But
not an entire complement of information that a inquiry via Terminal utility can.
•About Etrecheck (story + how it can be used + download product)
http://www.etresoft.com/etrecheck_story
Not sure exactly what the issue is you are facing, the computer may or may not have
a problem; what made you try to update software? If it has Mavericks, what does the
App Store or Software Update page show you? Do not upgrade to try & solve an issue.
Hopefully some information gained will be of help.
If the computer says it has Mavericks 10.9.5, it
probably does. However, what you need or hope
it to accomplish may require a different direction.
It may have older applications, or other problem.
Good luck & happy computing! -
Can I buy 1 update software for 2 Macs?
I have two Macs, one with Lion and One with Snow Leopard, Can I buy just one software update for the two Macs? or Do I have to buy one for each one?
You only need to purchase Mountain Lion once per Apple ID. Create a copy of the installer after downloading it but before starting the actual installation.
(70450) -
I was trying to update my iphone 4s and it came up an error. Now my phone only shows a charger and the itunes app.
You might need to do a few times
http://support.apple.com/kb/HT1808 -
I just recently tried to update my ipad from ios 4 to 5 and now I am getting an error message when I try to connect it to the computer so that I can download all of my apps, etc. please help! Error message says iTunes could not connect to this iPad. An unknown error occurred (oxE8000000A).
Help!Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.apple.com/nz/itunes/download) -
I have an iPhone 4 . Just last night it was asking me to update my system. So I did now my phone won't turn on or do anything all it does is show a picture of the charger and a iTunes . Please help
Hi Alljays2002,
Thanks for visiting Apple Support Communities.
If you only see the "connect to iTunes" screen on your iPhone, first try to reset it:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If you are not able to reset the iPhone or it returns to the "connect to iTunes" screen, you may need to restore your iPhone using the steps found here:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Best Regards,
Jeremy -
i turn on switch option and now i cant enter my passscode how i enter now and turn of switch control
Well, two thoughts.
The battery has completely discharged and will take overnight to recharge, so don't expect much in an hour.
The battery has deep discharged and is now dead. It will never recharge and should be replaced.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.
The flat fee for a battery exchange is, I believe, $99.00 USD. -
I have a iphone 4 running the newest os7 now my phone reboots all the time
Is anyone with a iphone 4 have a rebootint prob running the new os?
Pretty stale, but none the less...
I have an iPhone 4 (iOS 5.1.1) + Apple Official HDMI Out adapter. It does not work for my iPhone 4. Still trying to find a solution... -
Hi there
Hope someone can help me here. I am currently on holidays and my
Kids have disabled my iPad so I now have to sync with my computer.
I don't have my computer handy and want to use my device over the next few weeks
if possible so can anyone help me please
Thanks
DarrenYou will have to use a third party utility to extract your iPad and iPhone's music.
Read turingtest2's User Tip:
https://discussions.apple.com/docs/DOC-3991
Maybe you are looking for
-
Migration from Flex 3.3 to Flash Builder 4 problems.
So, I've been working on a Flex Builder 3.3 project for some time now. One of the things I had expected from Flash Builder 4 would be the ability to simply import a fully operational (bug free) 3.3 project. Wrong. My 3.3 project uses an imported FLVP
-
Release Strategies not works - When multiple material group in a single P.O
Hai, This related to Release Strategies in SAP- IS -Retail. The Material group was one of the character in the Rel Strgy. 1) If i create a P.O for the item which is related to " X" material group , Rel Strgy been set to P.O 2) If i create a P.O for
-
HT201210 When I Restore My iPhone with itunes gives error -1 will end of the Installing firmware
When I Restore My iPhone with itunes gives error -1 will end of the Installing firmware what is the problem ?
-
User and role permissions getting reset on managed server
Hi.. I am not sure whether this is really a clusteing problem. I have a clusted server with one admin server and one managed server. I have deployed the some of my own applications alongwith the Weblogic Integr
-
Hi, Can any body explain me what is IT0002 in HR Module Regards, Ramesh