HT5868 Windows XP Trust/Don't Trust

Everytime I connect my iPhone to my Windows XP laptop, I'm asked if I want to trust/not trust my computer. I select "trust" everytime, but only half the time does my device show up on my laptop. The other half, the device is recognized.
I had understood that once the laptop was trusted, it would be trusted indefinitely. However, the phone prompts me every single time I plug it into the USB port. It doesn't matter if the laptop trusted it on the last instance or not.
Anybody having a similar problem?

Hello andogigi,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: 'Trust This Computer' alert
http://support.apple.com/kb/HT5868?viewlocale=en_US&locale=en_US
Note: If you select Trust, the computer will be trusted indefinitely. If you select Don't Trust, you will be asked if you want to trust that computer each time you connect your device to that computer.
Have a nice day,
Mario

Similar Messages

Please Wait While Windows Configures Trusted Drive Manager

Sometimes when I get an email with an attachment and try to open it I get a message that says "Please wait while Windows configures Trusted Drive Manager". It is annoying to see this and I'm not sure how to get rid of the message. Thank you for
your help.

Thanks for the link. Software that comes with this computer doesn't have the Dell Protection since it is a work computer.
Hi,
Both the error message and the event log were all pointing to Trust Drive Manger.
Consider it happened to certain attachments, I suspected that there might be some feature of those attachment triggered this alert, like file type or something. So could please check what
these attachments had in common.
Meanwhile check if your PC is one of the models below:
Dell
ControlPoint (DCP) Security Manager Versions 1.X installed on:
Latitude 13, E4200, E4300, E5400, E5410, E5500, E5510, E6400 (ATG, XFR), E6410
(ATG), E6500, E6510, XT2, XT2_XFR, Z600
OptiPlex 380, 580, 760, 780, 960, 980, XE
Precision Mobile M2400, M4400, M4500, M6400, M6500
Precision WorkStation T3500, T5500, T7500
Reference to:
this URL

How do I manually transfer music with the new itunes update for Windows? I don't want to sync my library and lose all of my music for what I have in my current library.

How do I manually transfer music with the new itunes update for Windows? I don't want to sync my library and lose all of my music for what I have in my current library.

The same way it was done in every previous version.
Connect the device to the computer.
Right click on the device in iTunes and select Transfer Purchases.
Why would you lose any content by syncing with iTunes?
Is this not the computer that the device is normally synced with?

HT4689 In the video: mission control in action,we see many open windows which I don't have. How do they get there?,

In the video: mission control in action in Mac 101,we see many open windows which I don't have. How do they get there?

On modern MBairs, the F3 key will take you to Mission control. Once there, hold the Option key down and you'll see a tab with the "+" sign on it. Pressing this will add another desktop. You can assign apps to desktops or just drag them there. Switching between desktops is done by swiping either 3 or 4 fingers across the trackpad. (depend on the option chosen in System Preferences > Trackpad).

How can I find itunes 10.1 for windows. I don't want the cloud in newer version.

How can I find iTunes 10.1 for windows. I don't want the cloud, and my iPod touch won't go back to prior versions.

Had the same problem. Also worked fine on my MacBook, but not on my new iMac. Here's what I did to fix it:
Archive and Reinstall Mac OS (takes about 40 minutes). This reverted my system back to 10.6.2. Just pop in your Mac OS disc that came with your computer. Mine had 10.6.2 on it, and "Archive and Install" is the default option. When it's done, run software update and update everything. Now it all works fine.
Somewhere along the way, some file got corrupted somehow. But doing an "archive and install" of your OS undoes whatever file damage was incurred, and allows everything to update normally via Software Update as it should.

HT3986 Windows wants to restart several times during initial installation. How do I restart it in windows, so I don't lose my installation progress?

Windows wants to restart several times during initial installation. How do I restart it in windows, so I don't lose my installation progress?

It would normally restart in to Windows but if you need to do it manually you can hold the Alt key as the chime sounds and then pick the Windows hard drive icon.

I LOST MY CD 'MACBOOK ,NOW INSTALL WINDOWS BUT I DON,T HAVE DRIVER ?, I LOST MY CD 'MACBOOK ,NOW INSTALL WINDOWS BUT I DON,T HAVE DRIVER ?

I LOST MY CD 'MACBOOK ,NOW INSTALL WINDOWS BUT I DON,T HAVE DRIVER ?, I LOST MY CD 'MACBOOK ,NOW INSTALL WINDOWS BUT I DON,T HAVE DRIVER ?

If you don't have your install disks you can get the gray disks by calling Apple Store Customer Service at 1-800-676-2775 They can send them to you for about $16 per disk plus S & H. Just give them your serial number and they'll know which ones you need.
Or you can get a Snow Leopard retail disk for $29. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY

I have a 2008 macbook that I originally set up as a dual platform (mac and windows). I don't use the pc side. Can I reconfigure?

I have a 2008 macbook that I originally set up as a dual platform (mac and windows). I don't use the pc side. Can I reconfigure it? If so, how?

Hi Niel,
I tried but I get this message: I am trying to remove it not install it. I don't think I have the installer disc anymore. What now?

I downloaded firefox 6, and restarted computer, but the message under the search window says I don't have the latest firefox. I tried twice. thank you

I downloaded Firefox 6 and restarted computer, but the message under the search window says I don't have the latest Firefox. I tried twice. Thank you.

I have a similar problem; but I think the cause of the "already running" message is that my computer crashed.
I rebooted before I learned to look for the parent lock file, but even when I knew to look for it, I found my original profile folder to be empty.
So I created another profile folder, and FF works, but I cannot access my old profile folder. When I open the location where it should be, nothing's there. But if I go to profile manager, I see my original profile is still there (and it has a location, it's where it should be - and where it's invisible, but even if I type in this location, nothing comes up).
I tried making all folders visible (I run Windows 7), but this did not make my old profile visible.
I want to find it because of the bookmarks I bookmarked recently.

When i do the download of adobe reader 11 there is only a black window and it don't start

when i do the download of adobe reader 11 there is only a black window and it don't start
excuse for my bad english but i'm italian

Please don't post the same question multiple times!

HT2102 These Windows registry setting don't seem to apply to iTunes 11.x.

These windows registry settings don't seem to apply to iTunes 11.x. Are there any documents with updated registry settings? I tested the registry setting on Windows 7 with iTunes 10 and iTunes 11. There was different behavior from iTunes 11. Specifically parental controls are not locked and grayed out.

hayley7070 wrote:
How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply
What instructions?
In the source list click devices (so far so good) then click the entry for your iphone or ipod. that doesn't exist. HELP asap
You don't import photos from the iPhone to your computer using iTunes.
See this -> iOS: Importing personal photos and videos from iOS devices to your computer
Note this only applies to photos taken with the iPhone. Any photos you previously added to your iPhone using iTunes should be copied from old computer to new computer.

HT5868 i accidentally hit don't trust and no matter what i do it will never ask me again

I accidentally hit don't trust when i connected to my mac and know it won't ever give me the option to select trust again. What should I do??

Ok, this just happened to me and none of the above seemed to work. But, I have found a solution that worked for me:
go to settings > general > reset > then click 'reset all settings' (only click if you happy to reset all settings)
Obviously, this will reset all your settings but not lose content.
My iphone 5S was attached to the computer and itunes throughout this process .... it will power down, restart and you will notice the sync icon start to whirr!
Obviously once redone you will have to reset security thumb/passcode - but your sync should now be working!!!

HT5868 I accidentally selected [don't trust]

I acidentally selected [don't trust] but I want to change that and it's not prompting me anymore to selct [trust] or [don't trust]. Is there another way to change it?
Thanks,
Lee

According to Apple:
"If you select Don't Trust, you will be asked if you want to trust that computer each time you connect your device to that computer."
Are you using a Passcode? If so, try unlocking the phone before connecting to your computer.

HT5868 I accidentally hit "Don't Trust" and now my iPhone won't sync to my computer. It won't ask me to trust it again even when I restart everything. Now what?

When I connected my phone to my computer I accidentally clicked "don't trust" and now I can't change the setting to allow my phone to "trust" my computer even though it has trusted it before I downloaded the new update. What do I need to do to be able to connect my phone to my computer again?

Ok, this just happened to me and none of the above seemed to work. But, I have found a solution that worked for me:
go to settings > general > reset > then click 'reset all settings' (only click if you happy to reset all settings)
Obviously, this will reset all your settings but not lose content.
My iphone 5S was attached to the computer and itunes throughout this process .... it will power down, restart and you will notice the sync icon start to whirr!
Obviously once redone you will have to reset security thumb/passcode - but your sync should now be working!!!

HT5868 I tap "trust", but my device does not sync to my computer. Why?

I'm trying to sync my iPhone to my computer, and it keeps asking me if I trust the computer. It shouldn't because I've used the same computer to sync my iPhone before. Anyway, when I tap trust, it won't sync with my computer, what I don't understand is why?

This is happening to me on my iPhone 4S. I have uninstalled iTunes as well and still asking the whole trust thing. My iPod Nano 7th gen. isn't even "authorized" on iTunes and it's been connected before and won't show again, won't even charge when plugged in to my computer...I have a Windows laptop if that matters...is there anything I can do besides uninstalling iTunes AGAIN? Thanks for the question, Tommasso431...

HT5868 Windows XP Trust/Don't Trust

Similar Messages

Maybe you are looking for