HT5886 Switch control use for hardware control

The switch control description in support says the menu provides you hardware control including "Press the Sleep/Wake button to lock the device" I do not see that anywhere on the menu? What am I missing?

Hi Eyal,
Thanks a lot for your answer it has been very helpfull so far, but what I is happening now is as follows:
- I have a text type ZUZZ which contains some text on the original activity.
- I also have text type ZINT which should then contain the info from the the text type ZUZZ from the original activity. (That is the text from ZUZZ in the original activity should be copied into ZINT in the follow up activity).
I did as you told me and the text from ZUZZ was copied into ZINT but not on the follow up activity but on the original activity. I think that I might just be missing something on the customization but I don't know what it could be.
May I also clarify that the text ZUZZ is being filled up as a log (It takes the texts from another text and appends them with user name and time).
Type    Desc               Seq     Changes Transf     Access
ZUZZ     Clico Log          200     R     A     ZCLILOG
ZINT     Clico Internal Note     250     R     A     ZCLIINT
Access ZCLIINT has this:
Ref. Object     CRM_ORDERH             
Ref. Object     Transaction header     
Ref. Text Type  ZUZZ                   
Ref. Text Type  Clico Log              
Function        CRM_REFERENCE_TEXT_GET 
Do you know if there is something else I am missing so the field text get copied to the follow up instead of being copied to itself?
Best Regards,
Felipe.

Similar Messages

  • HT1586 What's the best HDMI switcher to use for Apple TV?

    What's the best HDMI switcher to use for Apple TV?  My widescreen TV has only one HDMI outlet and it is in use. 
    Thanks,
    Joanna

    Anyone sold by MONOPRICE.COM are really worth buying!

  • HT5886 Switch Control "freehand drawing"?

    "Use any of several methods to perform actions such as selecting, tapping, dragging, typing, and even freehand drawing."  How can switch controls be used for freehand drawing?

    Hi Hermant0010
    We have seen this behaviour too and we are trying to track down what causes it to occur. (I manage a number of idevices for use with persons with tetraplegia - hence my keen interest in switch control)
    What switch devices are you using? I see you have two switches attached?
    Also you are using an iphone with iOS7. We have upgraded to 8.
    I am not sure how we get this case out of the iPod section - maybe start a new one in an iOS stream?
    Andrew

  • Best Switch to use for Link Aggregation

    Looking to buy a new switch and was hoping that someone is already doing link aggregation on a current switch. Looking for 48 ports, I have a lot of Xserves.
    What model have you had the best luck with? THX

    Switches are like so many other things in life - you get what you pay for.
    Sometimes you can pay less and get enough (i.e. it works well enough)
    Sometimes you can pay less and not know what you're missing (you don't know what some of those advanced features are anyway, even though they could be useful)
    Sometimes you pay more and get features you don't need/want/understand
    Sometimes you find just the right option.
    Start off by determining the importance to your business. If the switch blows out and all your servers go dark, how much will that cost you if it takes an hour to get it back up? 4 hours? a minute?
    Look also at how much traffic you're pushing through your network. If you just need ports but aren't pushing many packets then a cheaper switch may suffice, but if you need every port to run at full line rate with no packet drops then you need something bigger.
    Do you need the switch to just pass traffic, or do you want statistics (e.g. SNMP, RMON, etc.) so you can track which ports are busiest?
    Then, of course, there's a budget. It could be $100. It could be $10,000. Your options are limited at $100, but $10K will cover a lot of options.
    While you're doing this, consider expansion room. Are you likely to need more ports soon? Are 48 ports enough? Maybe a chassis-based switch that's expandable would be a better option.
    At the high end you might consider anything from Cisco. Their Catalyst range of switches are the workhorses of many networks. They also come with a matching price tag.
    Other options worth considering at the higher end would be Force 10's. Force 10 is known for their 10-gigabit network equipment, but their S Series switches are a powerful play.
    Then there's Juniper's EX range. Juniper are known more for their routing platform (I guarantee most of your internet traffic goes through a Juniper router at some point), but their switches are a natural progression.
    Coming down the line a little, look at Brocade's FastIron switches. Formerly Foundry Networks (before they got bought out), I" ve used (and continue to use) their switches in my network. If all those are above your price bracket then HP ProCurve switches are worth a look.
    All of the above still may do more than you need, though. If all you really, really want is link aggregation and don't care about the rest then I'd probably go for a NetGear over the other lower-end players such as D-Link or LinkSys (even though LinkSys is now owned by Cisco).

  • HT6027 What the heck is switch control for and why would I use it?

    This doesn't begin to explain what this function is or why I would want to use it. What would it do for me exactly? "Switch Control helps you navigate your Mac using switches to enter text, interact with various items on the screen, play games, and ..."

    Switch Control is a feature that enables users with fine motor impairments to access their iPhone, iPod touch, or iPad through the use of one or more switches. Switch Control highlights items and item groups one by one on the device screen. To make a selection, the user activates a switch when the desired item or item group is highlighted.
    iOS: Using Switch Control - Support - Apple

  • Need recommendations for hardware and software - Current control

    Hi all,
    I am doing a project related to current control.
    The purpose is to keep the current at constant. So I measure the current and get the value; and send a analog signal to tell our machine to discharge or to charge in order to keep the current at constant. I need to write the program to give analog signal to machine based on the current input.
    Also, the machine can communicate with user. User can monitor the machine operation statuse and current level, etc.
    I want to use LabView to program, since it doesn't cost a lot of time. I saw there is LabView RT LabView FPGA, etc. I am confused whether all of these are just diffrent function for LabView or different software. Which one I should use?
    For hardware, I have no idea what is compactible with LabVeiw. What I should use?
    I am totally new to this. I'll appreciate a lot if anyone can give suggestions.
    Thanks

    Depending on your budget, operating constraints, timeframe and the transducers you're using a wide variety of equipment might suit your needs. I'd suggest calling the sales department. From NI.com, follow the Contact NI link in the top right corner of the screen. From there you can find information about getting in contact with sales. They help spec out systems all the time.
    Verne D. // LabVIEW & SignalExpress Product Support Engineer // National Instruments

  • Whats a good mac to use for a home flight simulator with flight controls and foot pedals?

    whats a good mac to use for a home flight simulator with flight controls and foot pedals?
    My old 6100 AV worked great on A10 ATTACK, back in 1993.
    whats a good set up now a days?
    I havent seen any MAC set ups as a lot of the after market accessories are on  Windows platform.
    Is there a way or should I get a dedicated simulator on PC?

    The fact that USB flight input devices appear to Windows only is not a limitation; for Mac most are programmed through the sim itself. I know X-Plane does that.
    I've simmed a lot and know that good sims need a lot of processor and video hardware horsepower, and you'll also need a lot of RAM. They also run up the internal temps. A Mac Pro has better cooling than an iMac. You can get a program like SMCFanControl to manually set up the fans speeds before starting the sim.
    I know of no sims today that will still run on a PowerPC Mac (2005 and earlier) so you need to look to an Intel Mac with top specs. If looking at iMacs, start by looking for the quad-core i7 processor. Those models usually came with an up-rated video card. Thing 12 to 16GB RAM.
    My 2010 iMac has the 2.93gHz i7 processor, video hardware (ATI 5750) with 1TB VRAM, and 12 GB of RAM. It runs the x-Plane 10 demo fine but I've not bought the full version because v10 seems to make foot pedals darned near mandatory, and I don't want $100 worth of pedals under my regular work desk at the moment.

  • What is the use of switch control ?

    when i go to switch control and add a new switch as screen tap. then i enable the switch control. what is the use of that? every time i tap i get the app switcher(multi task) which is good but to go to a certain app i have to tap home button 3 times. i dont know if im wrong. but in switch control i can add gestures but cannot find a way to use it. (simply if i can add special gesture like a swipe with 3 fingures and if  i can get multitasker or siri or any other program it will be very use ful isn't it?)

    Read these:
    http://support.apple.com/kb/HT5886
    User guide:
    iOS 7 Switch Control - Technical Solutions Australia
    http://bdmtech.blogspot.com.au/2013/09/new-in-ios-7-detailed-look-at-switch.html

  • Has anyone used switch control and siri at the same time?

    Has anyone used accessibility switch control and siri at the same time?

    Using Xmarks and Sync simultaneously will create a mess.
    You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
    The flip side is, bookmarks from your main profile would not get synced with your new profile.
    Alternatively, Xmarks is also available for Android.
    https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

  • I can not use  camera switch control of accessibility. Ios8.1

    hi, i have iPad Air with Ios 8.1  but i want to use my camera for siri or something...
    unfortunately the Button of switch control is Inactive totally.
    i don't know how can i use it.
    Regards
    M.oMMshi

    When you open your camera app, does it say "HDR on" at the top?
    HDR photos are better quality but take up much more space.
    Also, go to Settings>photos and camera.  Scroll down to "keep normal photo".  Is it on?  This feature saves a normal copy and an HDR copy of every photo you take.
    I bet your friend has this feature turned off along with the HDR as well.

  • Switch control settings - prevented from using touch screen

    I have turned on switch control and now managed to lock myself out of usdiong the screen all together.
    Heres what i set: Settings > general > accessibility > switch control > switches > add new switch > full screen > scanner select item.
    with switch control turned on i cannot use the screen at all.
    i have tried asking sir to turn it off but he keeps saying "which setting" and triple clicking the home button brings up the switch contol header up but i am still unable to use the screen.
    i have read that i can turn on voice control by asking siri, but that brings up a screen where i need to again use the screen.
    occasionally i see a blue box travel oer the screen but i dont know how to use this or how to bring it up again.
    has anybody got any ideas???

    Found it.
    For anyone who has this problem::
    check this video  http://youtu.be/2W3Z0kSiL7o
    If you somehow turn on "Screen" select item, it renders any touch useless.
    Here's what you can do, even if you have your phone password protected.
    Use Siri to turn on Assistive Touch.
    1. Hold down home button and ask siri: Turn on Assistive Touch
    2. May have to send a second command: on.
    Now your screen should be accessible.
    [email protected]
    posted by: ihshan

  • HT204053 Enter the Apple ID you want to use for iCloud in Control Panel Network Internet iCloud.  Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes iTunes Store.

    Enter the Apple ID you want to use for iCloud in Control Panel > Network > Internet > iCloud. 
    Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes > iTunes Store.

    Welcome to the Apple community.
    iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
    For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

  • Software for Power Switch Control and One Key Recovery for Windows 8?

    Hi. I have recently upgraded to windows 8 with a clean install. I was wondering if there is software to get the power switch control software back so I can set it to auto, turbo or cool because without it I think using the switch is useless. I also would like to know if there is a way to get one key recovery back.

    I can't use the One Key Recovery of my Y2P anymore, as I decreased the size of the C partition in favour of increasing D:\Data
    OKR won't even start anymore...
    Any chance to get OKR working again if I make these partitions the same sizes?
    Who has the exact partition sizes in MB of the Y2P 20266 with Samsung PM851 256 GB SSD?
    0 1 MB  NO_NAME unallocated
    1 1000 MB  WINRE_DRV NTFS  
    2 260 MB  SYSTEM_DRV  FAT32 (EFI)
    3 1000 MB  LRS_ESP FAT32
    4 128 MB  NO_NAME Other
    5 ? GB  C:\Windows8 NTFS
    6 ? GB  D:\Data NTFS
    7 14135 MB  PBR_DRV NTFS Recovery
    8 327 kB  NO_NAME Unallocated
    Data is backupped daily and I already have a full system backup together with a bootable USB stick that has been tested.
    But I like to make sure I can reinstall Windows in the future..
    Freedom of Speech has just left the building

  • Controlling area already used for org. unit problem

    Hi people,
    can you please help me with one problem, my customer is upgrading SAP HR from 4.6 to 6.0 and now we are testing QAS system.
    When I create new or. unit in PPOME, I have Cost-centre inherited from the org.unit above, but when I want to put another Cost-centre it gives me the next error "Controlling area HR01 already used for organizational unit XXXXXXXX".
    The same procedure worksin PRD system which is on version 4. 6. Could you please help me what is wrong because i am not able to change cost centre in the QAS system.
    Thank you.
    Romano
    Edited by: Romano Cinotti on Oct 13, 2009 11:25 AM

    Hi,
    To which object u are going to change the cost center i.e, position, job, org.unit.
    If you are changing the cost center to position, If it is not allowing to change the cost center then u have to check the parameters:
    May be u already assigned cost center
    May be u already assigned cost center to ur org, unit, which u assigned to ur position. If u already assigned diffrent cost center to ur org.unit, you may not change the cost center to ur position or job.
    Regards
    Devi.

  • Is it possible to use software limits on 7354 board when switching control modes from open to closed or closed to open loop?

    Is it possible to use software limits on 7354 board when switching control modes from open to closed or closed to open loop?

    Hello Richard,
    When you say 'open loop' and 'closed loop', are you referring to running the application in position and torque mode? If not, how exactly are your controlling a servo motor in open loop? 
    In closed loop mode, the encoder values will be used as reference and the motion VIs can be used to configure the software limit as required. Are you currently losing the software limits? If so, how exactly are you losing these values? I am not sure I understood what exactly is happening with software limits in your program, so any more information on this would be useful. 
    Vivek Nath
    National Instruments
    Applications Engineer
    Machine Vision

Maybe you are looking for