HT5891 When switching between applications on different displays, Microsoft Word (or Excel) "steals focus" and becomes the active window.

In Mission Control, Displays have separate Spaces is checked. This happens regardlesss of whether I'm switching using Command+Tab or a mouse. Any suggestions?

There is a workaround for this problem, which was posted by Highestwater on the Microsoft Community thread for this bug and worked for me as well:
Go to
System Preferences > Mission Control >
and UN-check the box labeled "Displays have separate Spaces" (see image below)
The original poster on this thread may already be aware of this workaround, because he/she mentioned that the "separate Spaces" option is checked. But if you can live without the extra Mavericks dual display features (like going full screen in 1 display only, switching spaces independently on each display, and having a menu bar on each display), then uncheck this option and the "stealing focus" bug seems to disappear. For me the bug is so annoying that it's worth it to lose the extra features. Just yesterday I closed a Word document I was working on by mistake because I clicked on a Finder window on my other display and immediately pressed command-w to close it, without realizing that the focus had switched to my word document which closed instead. It was saved, but this sort of stuff interrupted my work enough to be both an annoyance and a time drain.

Similar Messages

Flash CS3: Serious lag when Switching between Applications

I've got a serious problem with Flash CS 3 on my Macbook Pro,
which makes it almost unworkable.
When I'm working in flash, switch to another application
(Mail, Illustrator, any...) and then switch back to flash. the
program freezes for at least 9 to 10 seconds: The Menu's are all
transparant and greyed out, and the only thing I see is the beloved
"beachball" spinning.
Needless to say that this makes it very hard to work with the
program, since switching between apps is a big part of my workflow.
Is anyone experiencing the same problem?
I have re-installed the whole CS3 suite (twice) and even
cleaned up my computer and did a clean install of OS X!!
I'm running on a 15" mac book pro (2,33) with 2gig memory,
bought last may.
Any help is welcome,

I'm having the same problem as well. I was using Flash 8,
thought I would upgrade to Flash CS3 and solve the problem but that
was no good. There's still a long lag time when switching to Flash
from any other program. Not sure if it's a Memory problem or a Font
problem. Any word on a solution for this annoying problem?
I'm running a PowerPC G5 with dual 2.0ghz processors and 2.5
GB of ram.
Thanks!

Delay occurs when switching between applications

System worked fine before installing Mavericks. Now each time I switch been applications there is a 5-10 sec delay before the new application responds. The applications don't actually hang, the system does catch up, but it makes the system unusable.
For example, I wil have Outlook 2011 up on one monitor and Safari up on another monitor and each application will work fine and be responsive. But when I click between the two open applications, 5-10 sec delay occurs. During the delay, the first application continues to be responsive (will respond to mouse clicks, can type, can close, can move/resize, etc.) but the second application (the one that I'm clicking to) won't respond to anything. Evenuntaly, the system catches up and the second application becomes responsive, but the same thing occurs when switching back to the original application.
So far, it seems to impact all applications - Office 2011, evernote, safari, webex, adobe reader, system perferences, and finder.
Verified Disk Permissions and vefied disk - no improvement.
Rebooted the system - no improvement.
Ensured spotlight indexing wasn't running.
Any suggestions?

Apple was able to help fix this. From what I understood, they had me delete the Apple settings files and then the operating system would recreate them - sorry, didn't note the specific directories they said to delete. They said it was an issue caused by installing the new OS. Deleting the files fixed the issue.

Weird window behavior when switching between applications????

When I switch between two applications, the other window disappears. This is annoying if I am trying to copy text from say, textedit, to another application like mail or Excel. When I switch to the mail app, the textedit window disappears. And when I switch to textedit, the mail window disappears. I have to keep going to the Dock to get to the other window.
I did not think this was always the case. Is there a setting I am missing? I really think I was able to see both a textedit window AND an Excel or Mail window at the same time. Please help

Do you have any third-party extensions installed? I googled and found several that will perform this auto-hide action: Quitling, App Presto, AutoHide, and DragThing are some of them.

Line across screen when switching between applications?

2011 21.5" iMac OS X Mavericks (10.9)
AMD Radeon HD 6770M 512
Since upgrading to Mavericks I have noticed a line across the screen during the genie effect when you open, close or minimize applications. The line is most noticable when minimizing an application which is on top of my wallpaper. The wallpaper is the default Mavericks image.
The line does not appear when scrolling or sliding back through pages in safari etc. The above is the only thing that will trigger the issue.
Is anyone else experiencing this or have a solution for it?

Do you have any third-party extensions installed? I googled and found several that will perform this auto-hide action: Quitling, App Presto, AutoHide, and DragThing are some of them.

IE7 freezes when switching between applications

I have 2 production applications. If I open one of them and subsequently open the other one all is fine... The tab for the original app (at the bottom left of workspace) is replaced by the newly opened app (after the pop-up saying 'loading application' is displayed momentarily), as usual. However, if I then try to open the 1st application again the pop-up saying 'loading application' never goes away. At this time I am unable to select any other option except to close IE7 and re-open.
I would like to know if this is a workspace bug or an IE7 settings issue.

We've had conflicts with IE7, and IT eventually rolled us back to 6 to resolve. Not a formal indictment, but call this one vote for an IE7 issue.

Trouble switching between applications

When switching between applications I have a weird problem. Intermittently the menubar for the app I'm switching from will stay but the windows for the app I'm switching to will appear like they should. Most of the only way to fix this is to kill the apps.
Any thoughts?

No Not using any tricky keys to switch. Applications just "lock up" like the old days. After switching apps, can't get back to an app. It is locked up in a process that ultimately results in an entire hard reset. Any one else have this happen on an iMac 2.4 intel core 2 running 10.5.2? Really weird slow behavior lately as well. Maybe there are some prefs I could dump..
tried the disc utility thing a few times. Fonts seem to create havok so I often disable those as well.

Getting the spinning wheel when switching between accounts

Hi all,
I am getting the spinning wheel when switching between accounts on a mac mini. There are two accounts and quite often when we go from one to the other we get the spinning beachball after putting in the password to log in. I am finding the only real solution to be is to put the machine to sleep (button at the back for a sec or two) wait for it to go to sleep and then wake it up and it mostly will then log in and keep working.
It's an older intel dual core mac mini with an upgraded HDD. I previously had an iMac running snow leopard where the same problem occured and recently migrated over the account to the mini running Lion. It seems to be happening more often.
I also seem to remember that occasionally when using say Pages you would get the spinning beachball and then you would have to hit the desktop or go to another program and then back to pages to get it working again.

Does it occur no matter which way you're going say? i.e, both from
User 1 -> User 2
User 2 -> User 1
If its only one way, have a look at the 3rd party loginitems for the account your going to. If its both ways, see what 3rd party loginitems both accounts have in common. The best (though time consuming) way to eliminate the culprit is to remove all 3rd party apps from loginitems and add them in one at a time, testing for the problem each time.
If you get the BSOD while actually logged in (say, while using Pages), try running activity monitor (or use terminal.app with the command 'top -u' (without the quotation marks)), and see if you can notice any process running at more than 30%CPU.

Graphic distortion when switching between external and built-in display (rMBP)

Recently (within the past two weeks or so) I've noticed a strange issue when switching between my external display (Thunderbolt) and my built-in display on my 15" rMBP. The following issue seems to be specific to Photoshop CS6.
Typically, I'll have a PS document open on my external display and I'll wind up taking my to another location. If I close the PS document while on my built-in and then re-open it, I get all kinds of distortion and pixellation. Closing out PS and reopining, restarting, logging on/off; none of it seems to work. It seems like the issue is with the PSD itself, but it doesn't make any sense to me. Any ideas? Screenshot: http://i.imgur.com/iCipSc7.jpg

Do you have intel gpy as well as other graphic card? You may be viewing document on different gpu's. PS does not like multiple gpu's.

Forced to Close all open applications when switching between users.

I recently purchased a MacBook Pro 13 inch, and have 2 accounts set up on the computer.
When switching between users on the computer, I am always forced to close all open applications on the current user, in order to switch to another user.
I was wondering if there was ANY way to keep the pages (specifically Safari) open when switching to another user, so that I can go back to them when I log back in to the other account.
thanks for the help!

Enjoy!
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8672.html

When switching spaces application menu is not showing

I'm not sure the is a Snow Leopard specific problem, but I have certain applications assigned to certain spaces. When I switch to a space for that application and it has an open document, everything is fine. But if I close all of the document windows for the application and then switch away from that space and then back to that space, the Finder menu takes over. The application is still running, but I have to either click it's icon in the dock or cmd-tab to the application to get it's menu or toolbars to appear.
Is this normal behavior? It's kind of a pain to mak sure that I at least have one open document window so that when I switch back to that space I don't have to "reactivate" the app. Just so I make sure i'm explaining this correctly...
I have Photoshop in it's own space and then open the program and then don't open a document window and then switch to another space and then switch back to the Photoshop space, I now have the Finder's menu displayed and a blank desktop showing. I then have to click on the Photoshop icon or cmd-tab to the running application to get it's menus and toolbars to show.
Thanks for your help.
Mark

First off, I meant to title this "When switching spaces application window is not showing."
Just in case anyone else runs into this problem or any other weirdness with switching between spaces, the answer seems to be trashing the com.apple.dock.plist file and then restarting the dock. The preferences file can evidentially get corrupted and create some problems. Spaces does not have it's own plist file but stores it's data in the dock's plist file. Be warned that this will reset all of your dock preferences including which apps you have on the dock.
Mark

FaceTime camera turns off when switching between spaces

I will have the Facetime app on, have a conversation with a person. I have Mail opened up full screen in another "space." When I switch to that space, the camera turns off. I have to go back to the "space" that FaceTime is in in order to turn the camera back on. Is there a way to keep the camera on all the time when switching between different spaces and the Dashboard?

Having the same problem - In Snow Leopard, when I was on a FaceTime chat with a friend, I was able to navigate away from the FaceTime and surf, check the calendar and other stuff without pausing my video feed. In LION, for whatever reason, FaceTime pauses itself whenever I navigate away from the app. It's as if the application is FORCING me to stay in the conversation when, sometimes, I use FaceTime for TALKING, not VIDEO CONFERENCING.

Enforcing commit when switching between windows

Today our OracleForms application is built using the call_form built-in. The end user can navigate from FormA to FormB but he must close formB in order to continue work in FormA. This is the expected behavior of the call_form built in. We also ensured that all changes are committed when navigating between forms; posting is not used. This architure/technique ensures that end-users commit frequently; with 400concurrent users we must ensures locking is kept to a minimum. Consequence of this architecture is that we do not have a full MDI application.
In order to have a full MDI application I have to use the open_form built-in but if possible i want to keep 1 session for each application user, not 1 session for each form opened. This in order to prevent an explosion of database sessions. Oke lets use the no_session parameter.
Now what's my problem ? I order to keep locking to a minimum I want to enforce the end user to commit changes when switching between windows. Does somebody has an advice which trigger(s) would be the most appropriate one ?
Note : that the "raise form_trigger_failure" has no effect in the "when-window-deactivated" trigger.
Note : post-form does not fire since I'am not actually leaving the calling form
Note : if possible I would like to program the validation in the calling form instead of the called form; this in order to prevent switching between windows - can cause screen flikkering.
chris

note the when-window-deactivate does not always fire when switching between windows of different forms !!!
I simply want to keep the focus on the calling form when there are pending changes and throw a message to the enduser saying 'please commit before continuing...'
I tried to program the when-form-navigate trigger but in this trigger I'am not able to retrieve the form_status of the called form.
any other help would be appreciated.

Dreamweaver 6.1 - JavaScript error when switching between open tabs

When switching between open tabs a sequence of javascript
errors occurs. I had not used Dreamweaver for about 2 weeks, and
last time I used it with no problems.
I have tried uninstalling it, OKing removal of all files when
asked, re-installing it and updating with dwmx61_updater.exe, but I
still get the same errors.
This has rendered the software virtually unuseable, so any
help would be greatly appreciated, as I'm working to a
rapidly-approaching deadline.
"While executing Browse_Back enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Forward enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error occurred"
The relevant code seems to be :

<toolbar id="Browser_Toolbar" platform="win"
label="Browser Navigation" container="document"
initiallyVisible="false">
<button id="Browse_Back"
image="Toolbars/images/MM/back.gif"
disabledImage="Toolbars/images/MM/back_dis.gif"
tooltip="Back"
label="Back"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
command="dw.getDocumentDOM().browser.backPage()"
update="onEveryIdle"/>
<button id="Browse_Forward"
image="Toolbars/images/MM/forward.gif"
disabledImage="Toolbars/images/MM/forward_dis.gif"
tooltip="Forward"
label="Forward"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
command="dw.getDocumentDOM().browser.forwardPage()"
update="onEveryIdle"/>
<button id="Browse_Stop"
image="Toolbars/images/MM/stop.gif"
disabledImage="Toolbars/images/MM/stop_dis.gif"
tooltip="Stop"
label="Stop"
enabled="dw.getDocumentDOM().browser.getPageBusy()"
command="dw.getDocumentDOM().browser.stopPage()"
update="onBrowserPageBusyChange"/>
<button id="Browse_Refresh"
image="Toolbars/images/MM/browserRefresh.gif"
tooltip="Refresh"
label="Refresh"
enabled="true"
command="dw.getDocumentDOM().browser.refreshPage()"/>
presumably the next error is caused by the previous ones
failing :
"While executing getCurrentValue in AddressURL.htm, a
JavaScript error occurred"
the relevan tcode :
function getCurrentValue()
var dom = dw.getDocumentDOM();
var value = dom.browser.getURL();
if (value && value.length)
//check if is it not a temp file
//extract the tail of the url
var filename = value;
var slashIndex = filename.lastIndexOf("/");
filename = filename.substring(slashIndex+1);
var tempIndex = filename.indexOf("TMP");
if (tempIndex != 0)
addRecentAddress(value);
return value;

You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"earthdoctor" <[email protected]> wrote in
message
news:[email protected]...
> When switching between open tabs a sequence of
javascript errors occurs. I
> had
> not used Dreamweaver for about 2 weeks, and last time I
used it with no
> problems.
>
> I have tried uninstalling it, OKing removal of all files
when asked,
> re-installing it and updating with dwmx61_updater.exe,
but I still get the
> same
> errors.
>
> This has rendered the software virtually unuseable, so
any help would be
> greatly appreciated, as I'm working to a
rapidly-approaching deadline.
>
>
> "While executing Browse_Back enabled in toolbars.xml, a
JavaScript error
> occurred"
> followed by
> "While executing Browse_Forward enabled in toolbars.xml,
a JavaScript
> error
> occurred"
> followed by
> "While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error
> occurred"
>
> The relevant code seems to be :
>
> 
>
> <toolbar id="Browser_Toolbar" platform="win"
label="Browser
> Navigation"
> container="document" initiallyVisible="false">
>
> <button id="Browse_Back"
> image="Toolbars/images/MM/back.gif"
> disabledImage="Toolbars/images/MM/back_dis.gif"
> tooltip="Back"
> label="Back"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
> command="dw.getDocumentDOM().browser.backPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Forward"
> image="Toolbars/images/MM/forward.gif"
> disabledImage="Toolbars/images/MM/forward_dis.gif"
> tooltip="Forward"
> label="Forward"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
> command="dw.getDocumentDOM().browser.forwardPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Stop"
> image="Toolbars/images/MM/stop.gif"
> disabledImage="Toolbars/images/MM/stop_dis.gif"
> tooltip="Stop"
> label="Stop"
> enabled="dw.getDocumentDOM().browser.getPageBusy()"
> command="dw.getDocumentDOM().browser.stopPage()"
> update="onBrowserPageBusyChange"/>
>
> <button id="Browse_Refresh"
> image="Toolbars/images/MM/browserRefresh.gif"
> tooltip="Refresh"
> label="Refresh"
> enabled="true"
> command="dw.getDocumentDOM().browser.refreshPage()"/>
>
>
>
> presumably the next error is caused by the previous ones
failing :
>
> "While executing getCurrentValue in AddressURL.htm, a
JavaScript error
> occurred"
> the relevan tcode :
>
>
> function getCurrentValue()
> {
> var dom = dw.getDocumentDOM();
> var value = dom.browser.getURL();
> if (value && value.length)
> {
> //check if is it not a temp file
> //extract the tail of the url
> var filename = value;
> var slashIndex = filename.lastIndexOf("/");
> filename = filename.substring(slashIndex+1);
> var tempIndex = filename.indexOf("TMP");
> if (tempIndex != 0)
> {
> addRecentAddress(value);
> }
> }
> return value;
> }
>
>

Error when switching between drafts: "The instruction at "0x009f6487" ...

Running Contribute CS3 and get this error frequently when switching between documents in the Draft Console:
The instruction at "0x009f6487" referenced memory at "0x06bd7a24". The memory could not be "read".
Click on OK to terminate the program
Click on Cancel to debug the program
I do not get this error any other time. Only when editing multiple documents and switching between them. Clicking Save for Later on the toolbar, instead of clicking directly on the document in the Draft Console does not help.
Any help or suggestions are much appreciated.

Can you please try clearning the Contribute preferences?
To Clear the preference, quit Contribute, and then delete the Contribute CS3 folder in C:\Documents and Settings\<user>\Local Settings\Application Data\Adobe\ and also run the following command " reg delete "HKCU\Software\Adobe\Contribute 4.1" /f " if you are using Contribute CS3. Reconnect to the site and try the same scenario.
Note that, if you clear the preferences then no connection will be listed in Contribute, you need to recreate the connections. It will be like a fresh installation.

HT5891 When switching between applications on different displays, Microsoft Word (or Excel) "steals focus" and becomes the active window.

Similar Messages

Maybe you are looking for