HT5957 hello, Im trying to update my device without loosing my pic

Hello, Im trying to update to IOS7 without loosing my pics

Transfer them to your computer.
iOS: Importing personal photos and videos from iOS devices to your ...
Unless there is a problem (and they do happen) you should not lose anything.
Backup your device before updating
iOS: How to back up and restore your content - Support - Apple

Similar Messages

Hello, i tried to update the to the ios 7.04 and the iphone just stuck and he is not turning on anymore and my computer didnt recugnize him, what should i do?

hello, i tried to update the to the ios 7.04 and the iphone just stuck and he is not turning on anymore and my computer didnt recugnize him, what should i do?

hopefully you have a backup to either icloud or itunes because you need to but the device into recovery and then restore

Hello, i tried to update my iPhone 3GS and it work and my phone switched back on but it says insert a valid SIM with no PIN lock, what do i do?

hello, i tried to update my iPhone 3GS and it work and my phone switched back on but it says insert a valid SIM with no PIN lock, what do i do?

http://support.apple.com/kb/ts3694#error29
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)

Hello, I trying to update Adobe Creative Cloud Desktop but there is an error after instalation (error code: 50)
Uninstalling and installing again - nothing change.

Hi slawek,
Please refer to the thread below where this issue has been discussed:
Error code 50
Regards,
Sheena

Trying to update my device software

I'm trying to update my device software.
There is new software that's available for my BB 8900
but my wireless provider has the older version v4.6.1.250
I've tried to download from the BB website but fails to do so.
Has anybody updated their curve 8900????

This is what need to do -
1. Check the available software is specifically designed for your device or not
2. If it's for your device, then check is it released for your carrier or not
3. If it's for your carrier, then download and install in your PC and use Desktop Manager to load the new device OS in your 8900
4. If it's not released for your carrier, after installation look for vendor.xml file from c:\program files\common files\research in motion\apploader
5. Connect your device and install the new OS via desktop manager.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Hello im trying to update my apps and its keep asking me for my bank details can u help me please

Hello im trying to update my apps and its keep asking me for my bank details can u help me please

You need to update your credit card info before you can update your apps.
Accepted form of payment
http://support.apple.com/kb/HT5552

HT5567 how do i update my 3gs iphone to ios6 without loosing my pics or apps? through wifi? itunes?

how do i update my 3gs iphone to ios6 without loosing my pics or apps?

These items should be on the computer you usually Sync with... Are they not...?
To Update... See Here... http://support.apple.com/kb/HT4972

Updating iphone OS without loosing my apps

Hello!
A newbie wants to know;
I am currently trying to update to the new OS on my iphone 3gs. The problem is that when i press the update button in itunes, it says that i have paid items on my phone that i have to transfer to the phone before updating.. i am guessing this is the apps i paid for?..
But i cant syncronise my apps from the phone to the computer.. only the other way around..
What to do??

Choose Transfer Purchases from the File menu in iTunes.
(52367)

HT4972 I got a new mac because my old computer crashed. How do I update my phone without loosing all my old songs saved on my iphone?

I got a new mac because my old computer crashed. How do I update my phone to my itunes library without loosing all my old songs saved only on my phone?

Restore the backup of your old computer to your new Mac.

Hello Im trying to update my macbook pro from itunes version 10.5 to the latest version. can anyone tell me why I'm unable to update?

Hello
My macbook pro is version MAC OS X V.10.5.8 and I'm trying to udate my itunes from10.6.3 to the most current version. However, when I try to do this I cant seem to be able to find the newest version of itunes- I'm receiving the message that I'm up to date with the latest version.
Any help would be greatly appreciated.

You are for Leopard. To upgrade iTunes you first need to upgrade OS X. Start with Snow Leopard. You can upgrade further should you want to. But Snow Leopard will allow you to install the latest version of iTunes 11.1.5.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Get error 8018830f when trying to update my device

Hello everyone!
I develop Windows app as an hobby. I also try to learn the whole Windows ecosystem with C# as a base. I have bought myself a Nokia Lumia 520 and a Microsoft Surface RT first generation for the purpose of this developing. The OS on the Lumia 520 is now 8.10.14176.243.
Now, when I try to update the phone, I get error 8018830f. I have done following:
Let the phone reach 100% charge
Reset the phone
Double-checked that all accounts are correct and all dev. tools are installed
Checked this forum
Did an Internet search
I have not found a solution for my device, the 520, but I found some interesting threads about the 900-series. Links will come.
If anyone has a thought, please, share? =)

Hey, please See this
http://www.microsoft.com/en-us/mobile/support/faq/?action=singleTopic&topic=FA143712
If your phone was enrolled in the Windows Phone Developer Preview Program but was reset or otherwise removed from the program, the Lumia Denim update will not be available, or reports an error 8018830f. To recover this, first check your phone for any of the
updates for the Developer Preview and then install the Lumia Denim update.
You may also use the Software Recovery Tool to return your phone to the latest approved version of the software. You can download the tool at www.microsoft.com/mobile/support/recovery-tool.
"Solution suggested is enrolling back to dev preview and updating to latest OS version available, after which you should be able to update to Lumia Denim, if it is available for your device. This sort of confirms that if you are on developers preview
already and updated to latest version, you will get Lumia Denim automatically."
-N
Thanks N

HT5957 I have tried this update 15 times on my iPad 2. It always says it can't upload it due to error. It doesn't tell me what the error is. Can you help me update?

HOw to update 7.0.2 without an error message on mi ipad2?

Hello Mimilynn444,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Best of luck,
Mario

Hello all trying to update a table with utl input file

Hi all
please kindly help me with the below :
i have a table having 100 rows ,where i have to update the vxxx_DESC column from teh input file ,when the xxx_CODE is equal to vxxx_CODE from teh input file which is 3 didgit numeric format like the below :
exmp csv nput fie: where i have some duplicate records in it.
238,FKP
208,DKK
242,FJD
978,EUR
978,EUR
978,EUR
953,XPF
978,EUR
950,XAF
from the below script, in the log file its writing for me like -
Total Records present in Input file : 275
Total Records updated sucessfully in table : 186
But the update count is wrong whihc is more than the existing records. how do i get the exact update count avoiding the duplicates from the input file.
Please kindly help.
DECLARE
finfile UTL_FILE.file_type;
flogfile UTL_FILE.file_type;
vglobal_name VARCHAR2 (300) := NULL;
vlogfile_PATH VARCHAR2 (500) := NULL;
vINFILE_PATH VARCHAR2(100) := NULL;
vinfile_name VARCHAR2 (400) := 'INPUTFILE.csv';
vlogfile_name VARCHAR2 (500) := 'INPUTFILE.log';
vxxx_CODE CUN_CODE.xxx_CODE%TYPE :=NULL;
vxxx_DESC CUN_CODE.xxx_DESC%TYPE :=NULL;
vinput_rec VARCHAR2 (500) := NULL;
ntotal_rec NUMBER (20) := 0;
nUPD_rec NUMBER (20) := 0;
BEGIN
DBMS_OUTPUT.ENABLE (50000);
IF INSTR(vGlobal_name,'RAMAN') > 0
THEN
vLOGFILE_PATH := '/home/log/';
vINFILE_PATH := '/home/rpts/';
ELSE
DBMS_OUTPUT.PUT_LINE('Incorrect DB instance, so exiting from: ' || vGlobal_name);
RETURN;
END IF;
BEGIN
flogfile := UTL_FILE.fopen (vlogfile_PATH, vlogfile_name, 'W');
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ( 'ERROR WHILE OPENENING LOG FILE : '
|| SUBSTR (SQLERRM, 1, 200)
END;
BEGIN
finfile := UTL_FILE.fopen (vINFILE_PATH ,vinfile_name, 'R');
LOOP
vxxx_CODE :=null;
vxxx_DESC :=null;
BEGIN
UTL_FILE.get_line (finfile, vinput_rec);
vinput_rec:=TRIM(vinput_rec);
ntotal_rec := ntotal_rec + 1;
vxxx_CODE := SUBSTR(vinput_rec,1,INSTR(vinput_rec,',',1,1)-1);
vxxx_DESC := SUBSTR(vinput_rec, INSTR(vinput_rec,',',1,1)+1);
BEGIN
UPDATE CUN_CODE
SET xxx_CODE= vxxx_CODE
WHERE xxx_DESC= vxxx_DESC ;
nUPD_rec := nUPD_rec+SQL%ROWCOUNT;
EXCEPTION
WHEN OTHERS
THEN
UTL_FILE.put_line
(flogfile,
'ERROR FOR WHILE UPDATING : '
|| vxxx_CODE
|| SUBSTR (SQLERRM, 1, 250)
END;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
UTL_FILE.put_line
(flogfile,
'No more records in the input file.So Exiting the update :'
EXIT;
WHEN OTHERS
THEN
UTL_FILE.put_line
(flogfile,
'ERROR WHILE READING FROM INFILE. '
|| SUBSTR (SQLERRM, 1, 250)
EXIT;
END;
END LOOP;
UTL_FILE.put_line (flogfile,
'Total Records present in Input file : ' || ntotal_rec
UTL_FILE.put_line (flogfile,
'Total Records updated sucessfully in table : ' || nUPD_rec
DBMS_OUTPUT.PUT_LINE('Total Records updated in table : ' || nUPD_rec);
DBMS_OUTPUT.PUT_LINE('Total Records present in Input file : ' || ntotal_rec);
EXCEPTION
WHEN OTHERS
THEN
UTL_FILE.put_line (flogfile,
'ERROR WHILE OPENING INFILE '
|| vinfile_name
END;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ( 'ERROR WHILE GETTING GLOBAL NAME'
|| SUBSTR (SQLERRM, 1, 250)
END;
<<skip_loop>>
IF UTL_FILE.is_open (finfile)
THEN
UTL_FILE.fclose (finfile);
END IF;
IF UTL_FILE.is_open (flogfile)
THEN
UTL_FILE.fclose (flogfile);
END IF;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ( 'ERROR WHILE ACCESSING DB '
|| SUBSTR (SQLERRM, 1, 250)
END;
/

975482 wrote:
i have a table having 100 rows ,where i have to update the vxxx_DESC column from teh input file ,when the xxx_CODE is equal to vxxx_CODE from teh input file which is 3 didgit numeric format Looks like your code does exactly the opposite :
UPDATE CUN_CODE
SET xxx_CODE= vxxx_CODE
WHERE xxx_DESC= vxxx_DESC ;Additional suggestions :
1) create a directory object pointing to the location of your input file
2) create an external table to read the file
3) use a single UPDATE or MERGE statement to do the job, instead of this mess

HT5957 i am trying to update my apple products and am having a great deal of difficulty, is there something wrong with apple today?

I am having difficulties upgrading my iphone, ipad, does anyone know if they are difficulties on the site today..or am I not doing it correctly

You're not doing it correctly.

Hello, Im trying to update apple tv and on the screen it appears that I have to connect the box to a computer. I did but automatically offers me to restore setting, and even doing that it says it cannot be restore, the light still flashes fast. please

help

You have encounter Activation Lock, the antitheft feature of the iPhone. The previous owner did not remove the phone from their account. The phone cannot be used until they do. Return to the store and let them sort this out. It is very unusual for someone to "forget" to disable activation lock, as it is necessary to do so to erase personal information on the phone. So it is quite likely you bought a stolen phone.

HT5957 hello, Im trying to update my device without loosing my pic

Similar Messages

Maybe you are looking for