HT5957 iOS 7.0.2 upgrade issue

After a failed attempt to upgrade to iOS 7.0.2 through iTunes, my iPad 2 is stuck on the screen with the iTunes logo and 30 pin adapter logo. I have tried to do a hard reset, but the device keeps coming back to the same screen. Any suggestions?

You are in Recovery Mode. Follow the instructions below to recover your iPad.
http://support.apple.com/kb/ht4097

Similar Messages

IOS 5.1.1 Upgrade Issue: Should Facetime work to older iOS versions?

Following the recent upgrade to iOS 5.1.1 I am now unable to communicate to a user of the previous iOS version. Is this expected ?

FB app is notoriously bad, try deleting the app and reinstalling it. Or contact the app developer.

IPhone 4 iOS 6.0.1 upgrade issues; back-up won't load and unable to sync with iTunes

I've just updated my iPhone4 to iOS 6.0.1 and went through the back-up routine. The back-up routine appeared to partially update, displaying an error, however has brought through my contacts, previous messages and has even maintained my bluetooth connection with the car. The phone appears to function ok although it will now not sync with my iTunes and so will not download music and Apps to the phone. I've tried to re-run the back-up however it just hangs with a message box advising that it is 'Estimating time remaining', a message that just hangs there for ages with no apparent actions (by ages I mean 15 minutes +).
Any advice would be much appreciated; to say this is extremely frustrating is an understatement.
Many thanks.

Hello, having the same problem, but the answer by KiltedTim is too simplistic. Butcher60, any news? I have tried removing everything, still the same. It is true that Vista fails loading the driver, but, in my case, I noticed that:
- if you reboot the sistem, the first time you connect any ios device, it is detected either by vista and by itunes. BUT if you disconnect it and connect it again, or connect another ios device, it is not detected enymore, neither by vista nor by i tunes, and you get the message, in managing resources, that the drivers of Apple mobile devices cannot be initialized (code 37)!!! This is so bad when you are doing an update (it is what happened to me), because, if you connect the device the first time, and then start the update, when reaching the point in which the device reboots, it is like connecting it for the second time, itunes does not detect it, and the device goes in recovery mode, so you must use another computer (with XP no such a problem, it seams) to complete it.
- BUT the problem is not only by vista, something happend with itunes 10.7, because I went back to a recovery point before itunes last version, and the driver are loaded by vista every time, only when using itunes 10.7 the same error occurs, and I did not find any solution (because downgrading itunes is not possible)
So, vista worked detecting ios devices before ios6 and itunes 10.7, it works without itunes 10.7 detecting every device, but it does not work with last i tunes. Can someone do something???

How can I fix the battery drain issue on my iPhone 5s? it started when an updated to iOS 8.2 and upgrading to iOS 8.3 still did not fix it.

how can I fix the battery drain issue on my iPhone 5s? it started when an updated to iOS 8.2 and upgrading to iOS 8.3 still did not fix it.

Search this forum. Your issue has already been addressed ad nauseum.
Best,
GDG

IOS 6.1.2 Upgrade- Battery Drainout, Apps Crashing, Battery Charging issue

After my iOS 6.1.2 upgrade Battery drains out very very fast and Apps Crashing on frequent basis. Called up apple but in vein... Any Workarounds here ?
Till iOS 6.1.1 it was perfectly fine.
The problem is more pathetic with the battery charging. Even though I chagre it for hours, it just drains out in the next couple of hours...

The same problem here.. its just goes on draing out and out...
I have tried several ways of downgrading it but failed..
Try contacting Apple Support in your country.... Else it seems we have no other way then to wait for the 6.1.3 upgrade..
Anyone with any workaround ?

Battery drying up after IOS 6.0.1 upgrade in iPad 3

Somebody please help...
My iPad 3 battery is drying up fast after the IOS 6.0.1 upgrade.
In a matter of half an hour the battery has gone down by 10% which is really surprising and sad. Mine is a wifi model and without even playing games or any other battery eating graphics, this is now acting crazy even if I do normal web browsing.
This iPad is just a day old...yes I took this one yesterday...and by now only Apple broke my heart...Apple should come up with a new update..
Is anyone out here got this same issues?

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

IOS 5.0.1 upgrade on iPhone 3GS,

Prior to iOS 5.0.1 upgrade on iPhone 3GS, I could readily connect to and use a variety of wireless networks at home, work, and on road.
Since installing the upgrade as prompted on device, I find WiFi is unstable to unusable.
Unless the device is sitting practically on top of a router, I cannot maintain connections.
If I am more than 2 ft out of direct line of sught of router, I lose my connection.
I have to date read and completed the following online suggestions with no success:
1-Restarted router - NO CHANGE
2-Reset Network Settings on device - NO CHANGE
3-Toggled in and out of Airplane mode - NO CHANGE
4-Completed various options for start/restart of device - NO CHANGE
5-Disabled all other services using battery at same time (Bluetooth/Location Services, Mail, Reduced Backlight even) - NO CHANGE
6-Forgotten prior networks - NO CHANGE
7-Attempted to assign Static IP to device on router side - NO CHANGE
8-Restored from backup - NO CHANGE
8a-Repeat 1-6 again - NO CHANGE
9-Restored to Factory state - NO CHANGE
9a-Repeat 1-6 again - NO CHANGE
10-Changed Router security from OPEN to most SECURE - NO CHANGE
10a-Repeat 1-6 again - NO CHANGE
11-Setup new router - NO CHANGE
11a-Repeat 1-6 and 10 again - NO CHANGE
During all of this multiple iOS 4.x devices and iOS 5.0 devices have been on the routers connecting as always.
The device in question functioned perfectly up to the point of iOS 5.0.1 so I know this is not a iPHONE hardware issue nor is it a ROUTER hardware issue.
I have seen this posted frequently and do not believe this to be an isolated state I am in.
Any thoughts and suggestions before moving to another manufacturer all together and get out of this Apple mindset.

Nothing personal (or maybe just a little personal), but simply copying my post from a day earlier as your own is not helpful to the Apple communities or people that coming here looking for support.
It does nothing more than add a duplicate post and decrease the chances that someone might actually include a reference to my original post, which came from MY OWN HARD WORK in troubleshooting my issues.
If you are having a similar issue, post the issue after doing your own leg work and describe in your own words. Don't simple steal someone else's hard work to troubleshoot the problem as your own effort.

I have an iphone 4 and i have upgraded to ios 5. but after upgrading all my apps disappeared and in the summary tab in itunes it jus shows as other data..! please help

i have an iphone 4 and i have upgraded to ios 5. but after upgrading all my apps disappeared and in the summary tab in itunes it jus shows as other data..! please help

When I went to reload my phone it gave the option of restoring with icloud or itunes so i chose itunes (assuming icloud would have many more bugs). Afterwards, I had no music and 6.6g of other.
What I did was go into itunes, clicked my iphone 4, and clicked on each of the top tabs (summery, info, apps, ringtones, music, etc.) and ensured I had them all clicked onto sync/selected playlist etc.As my phone restored, the 6.6g of other dropped to .99g of other.
Unfortunately, all my songs are gone but everything else seems to be in tact. I don't think there is any way around this issue for now with the new ios 5 update when syncing either an ipad or iphone. I have an ipad 2 but am going to hold off on updating it until apple gets the bugs sorted out because, I'm sure you will agree, getting the music back to where you want it to be is a total nightmare and takes ages to not only pick the right songs and artists to put on it, but also the ones that will fit correctly with the space, depending on the size you have.
I hope that helps.

After the latest iOS 5.0.1 upgrade I can't receive sms (only iMessage)

After the latest iOS 5.0.1 upgrade on my iPhone 4s (carrier is AT&T) I can't receive sms. I can send messages, I assume they are all going through iMessage, but unless someone is using iMessage, I dont' receive a reply. I spent 2 hours on the phone with AT&T and they said its an issue with the latest patch and that apple is working on it. Here is what we did:
1. Soft reset
2. Reset network connection
3. Deleted all messages and closed Messages app
4. Reactivated the phone
5. AT&T checked all the settings on their end
6. Restored the phone to factory settings and restored from back-up
Is anyone else having this problem? And more importantly has anyone been able to fix it? And if so, how?

Try this... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
http://support.apple.com/kb/ht1430

IOS 5 ACTIVATION AND SIM ISSUES

Good morning all from England!
Im on O2 (UK) and last night upgraded my iPhone from 4.3.3 to 5.0. The update went smoothly until it came to activating the phone.
All of the activation steps seemed to go smoothly, Language select, country select, location services, WiFi...then it switched to the "your iphone is being activated...this may take up to three minutes to complete"
All through this, the signal area was static on Searching... then eventually went to no service. iTunes also popped up at this point saying that there was no SIM card installed. Then i am greeted with the "unable to activate iPhone" and states that the activation server is temporarily unavailable. and asks to try again. I have done this countless times but im now under the impression that the issue of no signal is causing the issue.
From reading other posts on the interweb, there is speak of baseband upgrade issues where signals are no longer being registered.
I have tried my O2 sim in another phone and works fine, so i know it is not the sim.
Apple, are you aware of this issue? If so, how quickly do you plan to fix it.
Otherwise, has anyone else out there experienced the same issues as me? And has anyone found a fix for it?
I have the iPhone 3GS and i have been told its the new bootrom type - if that helps??
Any help will be appreciated.

Prior to the iOS 5 update, I could get 2.5 days out of a single charge based on my normal usage. Today I received one call and used the map to check traffic, once, and I went from 100% at 7am to ZERO by 7pm - auto shut off.
Can someone please explain to me what is running in the iOS 5 backround that is sucking this thing dry?
I have alread turned off PING, most of the location settings, and notifications to conserve battery. This is INSANE. I don't need trouble shooting on the device. 24 hours ago, with iOS 4.3.5 none of this was happening. The only change between now and then, is the installation of iOS 5.
Any other suggestions out there?
Maybe I should shut the phone off entirely until I actually need it - that should save the charge.
Does anyone at APPLE monitor these blogs? This is a SERIOUS issue - and I'm not the only one. There is dialog already bubbling up elsewhere regarding the same issue.

No 3G connection on sprint network after IOS 7.0.2 upgrade. Any fixes?

Are there any know fixes for no longer having 3G connectivity on the Sprint network after IOS 7.0.2 upgrade? Seems like the newest 7.0.3 update does not fix this issue. Any help would be appreciated.

Hi ernesto70,
If you are having a No Service issue with your iPhone after a recent update, you may find the following article helpful:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
Regards,
- Brenden

Since iOS 7.0.4 upgrade Mail freezes daily mid-sentence on my iPad Mini. Any ideas on how to fix?

Since iOS 7.0.4 upgrade Mail freezes daily mid-sentence on my iPad Mini. Any ideas on how to fix?

Hello henkeblomqvist,
Congratulations on youre new iPad mini, and thank you for the details of the issue you are experiencing with the iPad.
I recommend following these steps for an issue like this (you can skip 4 because it does not relate to the issue you are experiencing):
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on),reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
You can find the full article here:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If you get to step 5, I recommend backing up your iPhone before performing the restore:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M.

Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

Hi,
I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
1. OBIEE 10g to 11g upgrade issues??
2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
3. Informatica 8.6.1 to 9.0.1 upgrade issues??
4. DAC upgrade issues??
any response for my questions is appreciated.
Thanks
Jay.
Edited by: Jay on Apr 11, 2012 9:11 AM

HI Jay,
We cannot explained thread list here, If you get any errors plz post me,will try to help out.
This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
Award points it is useful.
Thanks,
satya

Report generation toolkit upgrade issues

I have created multiple vi's in that utilize the previous report generation toolkits specifically using the Generate Report Get Data to Modify.vi and the Generate Report Set Modified Data.vi. Obviously the report reference has now changed in 8.6's version of the report generation toolkit and these vi's do not exist in the 8.6 library anymore. What vi's do I need to replace these functions with to make this code work. Can anyone tell me what the work around is to solving this problem. This is a picture of the code.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor
Attachments:
code.JPG ‏92 KB

Hi BJD1613,
The Report Generation VIs on the LabVIEW Palettes mutate properly. However, you may run into upgrade issues if VIs distributed with LabVIEW, but not available in the Palettes are used in the code. Hence, I would caution against using them for the same reason.
In this case, the specific references do exist in the report generation classes; however, since they are private, they cannot be accessed by VIs outside the respective classes. A temporary workaround for now is mentioned in the following KB 4OOCSJ4M Getting References in Report Generation Toolkit 1.1.3 with LabVIEW 8.6.
This was reported to R&D (CAR# 123064) for further investigation

1st generation ipod and I need the ios 3.1.3 upgrade

I have a 1st generation Ipod touch that I bought from Craiglist for my son and I need the ios 3.1.3 upgrade to download games. Can anyone tell me where I can get that?

Click here and install the software.
(66670)

HT5957 iOS 7.0.2 upgrade issue

Similar Messages

Maybe you are looking for