HT5961 Icloud security code issues--no access to device

My phone keeps sending the security code to a phone number I no longer have access to. I changed my phone number on my iCloud account to the correct one, but it still wants to use my old French number. HELP

You can change the number on a trusted device as follows:
Devices using iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Check that the phone number listed under Verification Number is correct. If not, enter another phone number.
Macs using OS X Mavericks v10.9 or later: Choose Apple () menu > System Preferences. Click iCloud, then click Account Details. Check that the phone number listed under Verification number is correct. If not, enter another phone number.

Similar Messages

What is my iCloud security code

what is and how do i find my icloud secirity code

My ImAc tells me i have to enter an iCloud security code but I do not know it, so was asking what it is and where can I find it.
Dragonre should be called "the blind leading the blind".
However I have found the answer (I think) In Trouble Shooting iCloud keychain in Support and only time will tell. If I am successful I will post the answer on the Forum.
Raymond

ICloud security code reset

I'm trying to reset my iCloud security code to enable keychain feature. Please share the procedure to reset my security code

Hello Balajirajah,
The following article provides steps for resetting your security code.
iCloud: About iCloud Security Code alert messages
http://support.apple.com/kb/HT5834
Cheers,
Allen

Change iCloud Security Code From A Mac

Hi,
Can I change my "iCloud Security Code(for my iPhone 6 Plus)" from a Mac?
How do I do that?
Thanks in advance.
Ed

It's okay.
I found the solution on the Net.
Thanks anyway.
Ed

My iCloud security code never works to verify my keychain,what am I doing wrong

ICloud is very confusing. I had a security code to unlock my keychain, sent to my cell phone. I then entered the 5 digit code, that was sent to my cell, into my mac. It says I entered it wrong. I tried two more times, and now it says I entered it incorrectly too many times, so I must verify my identity wt apple support, before continuing. I follow the link to this website. Unfortunately, I do not see any way to contact apple support, using this site http://www.apple.com/support/icloud/keychain/ What am I doing wrong? I have had Maverick installed for over 6 months, and my keychain is still not functioning even nearly well as it did in Snow Leopard.

Hey greenmind,
Thanks for the question. It sounds like you wish to contact Apple Support to verify your identity. The following resource should assist you in doing so:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thanks,
Matt M.

How can i retrieve my iCloud security code

I have a new iPhone6 with 8.1.2 and i get messages to authorize icloud using the security code from another device. I don't know that security code. How can i reset it without knowing it? I tried from an iPAd, tried to reset the security code. I don't know the status or the code. Can someone please help?

Hey deirdre99,
If you are being prompted for the security code and you do not remember it, take a look at the article to walk you through resetting it. It should be just a matter of going to Settings > iCloud > Keychain > Advanced > Change Security Code, then enter in your iCloud password and create a new one. Let me know if this helps or need further assistance.
Get help using iCloud Keychain
https://support.apple.com/en-us/HT203783
Take care,
-Norm G.

TS1646 Security Code issue, please HELP

I have verified ALL info with my credit card, entered ALL my info in EXACTLY the way it appears; still receive "Please enter valid Security Code" Is it possible to switch cards on my profile or do I need to "verify" the old card?

"Security code"? you seen to mean the iTunes Store password. "correct three number code" - the passworkd can't be "3 numbers" - This is the minimum requirments for an Apple ID password:
"Your password must be at least eight characters long. It must contain at least one number and two letters, one upper case and one lower case. It cannot include three consecutive and identical characters. It cannot be the same as your Apple ID or be any password you have used in the past year."
If you mean the "security code" of your credit card, make sure your address was entered correctly unsing USPS specifications

Security code issue in iTunes review in iPhone 5

Hi
When I'm reviewing my apple and billing information, I used a debit card information. After entering all the correct informations including security code, It's showing an error in security code. I tried so many times but no use. Please help me out

Not on that account if you don't have a credit card. There are instructions on this page for how to create a new account without giving credit card details : http://support.apple.com/kb/HT2534 - if you want to use the same email address on the new account then try changing it on the existing one via Settings > iTunes & App Store on your phone, Store > View Account on your computer's iTunes, or http://appleid.apple.com (you can create a new email address via http://gmail.com or http://hotmail.com to replace it with)

Security Code Issues!

So there has been nothing wrong with my account. Ever. I've been make occasional purchases everynkw and then, no problem right? Well today every time I try download an app or song (free or not) it sends me to my billing information where it tells me I need to put in my security code. It's never asked me to do this before but I put it in anyways and it tells me it's invalid. I try a few more times, still nothing. So I check my bank account and have plenty of money and I went back to my billing information and tried again and it still tells me it's an invalid security code. This all just came up out of the blue so I don't have any clue what to do.

This happened to me once. Turns out, my card had some problems. Check with the bank. Have you used your card to purchase anything in real life? Also, make sure the complete code is correct, not just the security code.

Cannot rent & buy a movie from Apple TV but no problem on MAC iTunes_ Security Code issue

I cannot rent or buy movies from Apple TV while my credit card details are correct and exactly the same as on iTunes. I am getting a security code request it's 3 digits but doesn't go further unless i insert 4 digits... as a result I get an invalid security code error...

When you view the main page on the Apple TV and select the movies option you should see the rental on the top shelf. There is also a rental section at the top of the page once you enter the movie section.

How to find icloud security code

i am trying to download content from i cloud but cant remember my security code.

What is the exact message that you are getting ? Error messages about security codes usually refer to the 3 or 4 digit code on the credit card on your account : How to find the security code on a credit card.

I forgot my iCloud security code.

I'm using iPhone 5s.
Serial Number: F97MQ0TEFRC9
IMEI: 35 198106 618996 6
How can I get it? Has it ever been sent to our email before? I can't seem to find it. Actually I don't even know that, please help :((
I already try choosing the Approve from Other Device too, but nothing happened.

Hi Florenciaibrachim,
If you know the correct mail of your iCloud go to https://iforgot.apple.com/password/verify/appleid and try to reset the password code. You have to ways for this the first way is to answer the security questions that you set before correct and the second easiest way is to reset via email if you have access to your email account . If with this ways you can't solve your problem you must go to your local apple store with the receipt of your i device and they will unblock your apple id and your device .

Can somebody please help me with this? Security code issue; very small code

Hi All, Iam a Unix admin and trying to learn Java/weblogic. I have a JSP and iam trying to run on my weblogic 81 Service Pack version 3.
My following code failed to work and giving me some security exceptions. Then in my weblogic console i saw
Domain Wide Security Settings > Anonymous Admin Lookup Enabled
The above checkbox is disabled. When i enabled, it worked. I talked to my company "Security" folks and they do not allow this checkbox to be enabled. they are saying fix your code problem......
if somebody can please let me know what a probable fix would, that be great and very helpful.
try{
Environment env = new Environment();
javax.naming.InitialContext ic = new InitialContext();
MBeanHome home = (MBeanHome) ic.lookup(MBeanHome.LOCAL_JNDI_NAME);
DomainMBean dom = home.getActiveDomain();
Set s = home.getMBeansByType("ServerRuntime");
ServerRuntimeMBean srmb = (ServerRuntimeMBean) s.iterator().next();
WebLogicObjectName on = new WebLogicObjectName(home.getDomainName()+":Location="+srmb.getName()+",Name="+srmb.getName()+",Type=ServerConfig");
//WebLogicObjectName on = new WebLogicObjectName(Name="+srmb.getName()+",Type="ServerConfig",Domain="+home.getDomainName()+",Location="+srmb.getName()+");
ServerMBean server = (ServerMBean) home.getMBean(on);
ClusterMBean cluster = null;
if( server != null)
cluster = server.getCluster();

did i asked such a dumb question? ... :)Well, yes, sort of. The problem description "My following code failed to work and giving me some security exceptions" doesn't have nearly enough details. Such as, what exceptions, what is it supposed to do, what did it do instead, that sort of thing.

How do i set up iCloud keychain if the security code was sent to a device i lost

So I lost my original ipone 5 while i was overseas. I locked it and wiped out the the information using Find My iPhone. Now i have a new ipone 5C but the verifivation code is being sent to my old phone number instead of my new one. I just want to keychain all my devices, those being an ipad mini, my mac book pro and my iphone 5C. Please help!

If you need to change the phone number associated with your account (from http://support.apple.com/kb/HT5834):
Devices using iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Check that the phone number listed under Verification Number is correct. If not, enter another phone number.
Macs using OS X Mavericks v10.9 or later: Choose Apple () menu > System Preferences. Click iCloud, then click Account Details. Check that the phone number listed under Verification number is correct. If not, enter another phone number.

*Security Error Issue while accessing youtube search method.

Hello All,
I am creating a flex aplication which has youtube videos search control. it works fine on local , but when I am trying to access this from any server its getting security error "[RPC Fault faultString="Security error accessing url" faultCode="Channel.Security.Error" faultDetail="Destination: DefaultHTTP"] " while accessing the search method url using httpservice. Can any one help me.
Thanks.

You may need to add the -use-network=true compiler argument. When in Flex Builder this does not matter as much:
From Flex Builder main menubar, Project - Properties - Flex Compiler - Additional compiler arguments: -use-network=true
If this post answers your question or helps, please mark it as such.

HT5961 Icloud security code issues--no access to device

Similar Messages

Maybe you are looking for