HT5996 Mail service on the OS X Server 4.0 works only locally

I updated my server to Yosemite and bought the next version of OS X SERVER 4.0.
At first glance, everything was as it should, until I noticed that I have new messages until the time when the server is updated. Then I myself sent a letter from the mailbox iCloud, but has not received a new mail.
Went into the mail settings on the server and see a message:
"Available on your local network at Server.local"
I once again set up e-mail in the section "Domains", but the service is still only available locally.
Messages from these mailboxes can I send. I get a letter, if it is sent to a mailbox that is configured on the same server, but if I send a letter from another server, it does not come any letters.
maping ports configured correctly.
How to make sure that the service has been available on the Internet and was able to receive emails from any servers?

These values are important:
mail:postfix:host_whitelist:_array_index:0 = "ns.100greenwood.net"
mail:postfix:host_whitelist:_array_index:1 = "mail.100greenwood.net"
mail:postfix:domains:_array_index:0:name = "100greenwood.net"
mail:postfix:mydomain = "100greenwood.net"
mail:postfix:enable_list_server = yes
mail:postfix:mydestination:_array_index:0 = "localhost"
mail:postfix:mydestination:_array_index:1 = "$mydomain"
Also in Terminal, type: hostname
That should show you the name of your host. Then type this command: sudo changeip -checkhostname
It should give you a result of: dirserv:success = "success"
If it doesn't then you have a hostname issue. The section above that refers to mail:postfix:mydestination:_array_index:0 = "localhost" uses the variable localhost to find your local server. If there is a name mismatch between them, bad things will happen. Make sure you change everything to the Internet (not the *.local) address so it routes properly.

Similar Messages

Filesharing service on the OS X Server 4.0 works only locally

Hi, the last years i used filesharing only in my local network. but now i would like to use it via internet. I did the port setup in my fritzbox but i can´t get the server via internet. Server 4 status for internet is green, wiki works but no filesharing.
Thanks.
Mac mini
OS 10.10.3
Server 4.1

Which ports did you forward through the firewall? On the FileShare tab, what is listed next to Permissions? All user, All Networks? Something different?
That being asked, as you sure you want to expose your file services ports to the world? If you are opening the SMB ports, you will likely get hit with a scanner within a few hours. Have you considered using VPN first, then connect to file services through the VPN tunnel?
Reid
Apple Consultants Network
Author "Yosemite Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store

How to setup the FTP Service by the OS X Server? Thanks~

Dear All,
OS X 10.8.2
I want to setup a FTP Service by the "OS X Server".
When I start the FTP Service, I can't login by my account.
FTP Service and FTP Client run at the same computer,
I think it's not the network problem.
Do you have the documents about the FTP Setting or "OS X Server" User Guide?
Thanks
Austin

service generally manages the lower level services on the system.
High level services such as Apache are managed via serveradmin:
serveradmin status web
serveradmin start web

Attempting to select Adobe E-mail service in the "preferences",am not receiving email with verification code to continue

I am trying to select Adobe e-mail service in the "preferences", but am not getting an email with verification code that allows me to continue. Anyone else with this problem? Probably need to contact Adobe directly, but so far not find that option.

I hope you receive some replies as I have a very similiar situation. I wish I could help but obviously I cannot.
\Good luck!

Using Web Services on the Crystal Report Server XI to return reports

Hi,I'm trying to setup for the first time a Crystal Reports Server XI R2 and put a couple of reports onto the server. This is so I can access the reports on the crystal reports server using using the crystal web services and finally display the reports in an ASP.NET web application.So far I have installed the server, created a couple of reports, put them on the server, and tested to see that I can access the reports using the Central Management Console. This all works fine and the reports are returned. Ok, now for the bit that's not working. I've got a C# ASP.NET web application, and I've followed a couple of <a href="http://support.businessobjects.com/documentation/product_guides/cr_net/vs_2005/html/crtsktutorialsotherdynamicpulldownwebservicehelpermethod.htm" target="_blank" title="Adding a Helper Method to Access Crystal Reports Web Services">tutorials</a> to give me an idea of what I should be doing to use the Web Services that are provided: <ul><li>ServerFileReportManager.asmx</li><li>ServerFileReportService.asmx </li></ul>However, it appears that when I list the child objects on the crystal server:<blockquote>serverFileReport = new ServerFileReport(); serverFileReport.ReportPath = ""; reportManagerRequest = new ReportManagerRequest(); reportManagerRequest.ExtraData = serverFileReport.GetExtraData(); reportManagerRequest.ParentUri = serverFileReport.ToUri(); ReportManagerResponse reportManagerResponse = new ReportManagerResponse(); reportManagerResponse = serverFileReportManagerProxy.ListChildObjects(reportManagerRequest);</blockquote>I always get a reportManagerResponse.ReportUris with a count of 0. Now the thing is I know that I have a couple of reports on the Crystal Server, but for some reason they're not been picked up. I must be missing something.Does anyone have any ideas??? Please!Many thanks in advance, ChrisCurrent Set-up:<ul><li>Crystal Reports Server XI R2 (11.5)</li><li>Virtual Directory of the web services: crystalreportviewers115 </li><ul><li>(Physical Path - C:\Program Files\Business Objects\common\3.5\crystalreportviewers115)</li></ul><li>Development Environment: Visual Studio 2005</li></ul>

I looks like your mixing technologies here. You are using Crystal Report Server and the Crystal Report Web Services that come with Visual Studio.I know that this might seem like they are the same product, and the naming does seem confusing but I'll try and make it easy for you to understand.Crystal Reports Server - This is a managed reporting solution which allows you to distribute your reports via the web. It has features like scheduling and built in security.It appears that you have a handle on what Crytal Report Server is from what you have been able to accomplish those far. You have created your report and published it to Crystal Report Server and viewed it via the Central Management Console. Crystal Reports Server has two methods for accessing the reports programatically.1. The Enterprise SDK2. The Web Services SDK<a href="/node/353">Check out this white paper that compares these two SDKs </a><a href="/node/256">This paper describes the Web Services SDK.</a>In the above paper there is a getting started section which points you to the Developer Library which shows you how to install the web services on your Crytal Reports Server machine.Crystal Reports Server does not have the Business Object web services installed by default so I would suggest following the directions in the <a href="http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/devsuite.htm">Developer Library.</a>The directions wont talk about Crystal Reports Server but these are the directions to get the Web Services installed. There is another web services technology which you are writing code for which is called Crystal Report Web Services. This technology comes with Visual Studio 2003. It provides un-managed reports via webservices. Un-managed means these reports are not published to Crystal Reports Server.So basically your problem is that your code is for Crystal Report Web Services but you are trying to view reports published to Crystal Reports Server. To take advantage of scheduling and security and web service access I would suggest using Crystal Reports Server and install the Business Objects Platform webservices to access the reports. I hope that's clear. Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

Several Mail Accounts with the same smtp server

Let’s assume, you have several accounts but however, you need to login to the same smtp server with different credentials (once with [email protected] and once with [email protected] – authentication on smtp servers is used to prevent spam): This works smooth on every mailbin on your apple/pc.
Try to import your settings with itunes to iphone and everything crashes. Iphone is unable to distinguish accounts on imported smtp servers – you can’t set individual passwords this way.
Work around: Create the accounts manually on iphone.

Ameya,
Have a look at your existing DAD configuration, it should be fairly obvious what you need to do to point at another instance.

Which sharepoint service applications & services are required for Project server 2013 to work fine.

HI,
Can any one help me,
I am planning to install project server 2013, what are the service applications and Services ( Manage services on server in central admin ) in sharepoint are required for project server 2013 to work fine, so that i will run only service
application and services to increase server performance..i don't want to configure all service applications when i am configuring.
Thanks in Advance..
vijay kommireddi

Hi Vijay,
If you are installing Project Server on SharePoint farm, You need to start the service Project Application Service which would be available after you install project Server 2013.
For Project Server Reporting you need to start Excel service and Secure Store service.
http://technet.microsoft.com/en-us/library/ee662106(v=office.15).aspx
Thanks,
Phani

Does any one know why the iCloud email server does not work?

I keep trying to send mail but it keeps telling me the server is not working and to create another. Help!?!

Either it ended up in a spam filter or it isn't being sent to that address. If you can't find it, use the link in the 'Additional Information' section of that article to contact the iTunes Store staff.
(88597)

'Not running in a hosted service or the Development Fabric' exception on deployed Worker role

We are getting this exception after a worker role has been operating fine in production for several weeks. Once this exception starts getting reported, it will keep getting it every time the worker role tries to access anything with the Diagnostics:
Not running in a hosted service or the Development Fabric
Note that the role is full trust, and as I mentioned this in in production on the Azure servers, NOT in debug. The worker role itself does some dynamic compilation, for which it needs to start a new AppDomain. It appears that the exception is
coming from the spawned AppDomain when it occurs. The exception itself is triggered on a simple Trace.TraceInformation call.
What could cause this?
What can we do to recover from this?

We are getting this exception after a worker role has been operating fine in production for several weeks. Once this exception starts getting reported, it will keep getting it every time the worker role tries to access anything with the Diagnostics:
Not running in a hosted service or the Development Fabric
Note that the role is full trust, and as I mentioned this in in production on the Azure servers, NOT in debug. The worker role itself does some dynamic compilation, for which it needs to start a new AppDomain. It appears that the exception is
coming from the spawned AppDomain when it occurs. The exception itself is triggered on a simple Trace.TraceInformation call.
What could cause this?
What can we do to recover from this?
Hi,
I have tested this situation in Windows Azure platform and i can not reproduce your exception message, my test code in follwoing MSDN samples and i deploy it in Production status.
The MSDN article (include Appdomain code snippets)
http://msdn.microsoft.com/en-us/library/system.appdomain.aspx .
Base on my understand, the "Not running in a hosted service or the Development Fabric" error message occur when Azure Emulator or Azure development fabirc, because you create a new appdomain in WorkRole, and it may cause permission errors, a similar
posts by my research:
https://social.msdn.microsoft.com/Forums/en-US/windowsazuretroubleshooting/thread/50987285-58ac-484e-b604-725fe01a3325
If you still have some problems, please inform me. Thank you.
Please mark the replies as answers if they help or unmark if not. If you have any feedback about my replies, please contact
[email protected]
Microsoft One Code Framework

Since the update my password no longer works only on apple tv

Since the update my password no longer works on apple tv

Cute. I redid my apple password last nite and made it real simple. It worked fine signing in to the forum just now. When I use it to sign in on Apple TV I keep getting message. ' server not available'. I had gotten it to sign in earlier but netflix wouldn't play the movie. Just the previews. So I reset everything and tried to start over and I can't log on at all. So if you have any helpful suggestions I would be interested in hearing them. Thank you

How Do I Increase The Speed Of Sending Emails Using The Mail Service on my Mac Mini Server?

Note: This is the first time I have set up a mail server.
I have a Ruby on Rails application where I am currently sending approx. 240 individual emails with the potential of more being sent each week as more people add themselves to our mailing list. I am sending them invidually in order to personalize the emails and to hopefully prevent my emails being falsely identified as spam.
The GoDaddy email address I was using in my Rails application has a daily limit of sending 250 emails each day. With our mailing list fastly approaching 250 I decided to set up an email address on my Mac Mini Server using Mountain Lion (OS X Server). The email address was set up to be stored locally at the advice of Apple Enterprise Support. This email address will not be used in an email program. It will only be used in all my Rails applications.
My emails send properly but take almost 10 seconds an email. When I use the same software with GoDaddy's email address the emails take about eight minutes to send. With the email address I created it takes about 41 minutes. The difference seems to have to do with the sacl_check being done. Here is an example of what I see for each email in mail.log.
Mar 14 11:06:50 hostname.domain1.com postfix/qmgr[45322]: 4B2C5603D25: removed
Mar 14 11:06:59 hostname.domain1.com postfix/smtpd[99464]: sacl_check: mbr_user_name_to_uuid([email protected]) failed: No such file or directory
There is 9-10 seconds that elapses when the sacl_check. If I subtract this difference the remaining time is almost the time that the GoDaddy email takes to send the same number of emails.
The link below is a post about the sacl_check. I was looking at the comments by powercore from Germany at the comments where settings in /etc/postfix/main.cf are discussed.
https://discussions.apple.com/thread/3241121?start=0&tstart=0
Will making these setting changes speed up the sending of the emails from my Mail Server or is there something else I can check?

http://en.wikipedia.org/wiki/Intel_Quick_Sync_Video
OS X [edit]
Apple added Quick Sync support in OS X Mountain Lion for AirPlay Mirroring and QuickTime X.[9]

Mail bouncing from the Microsoft Exchange Server.

Hi All,
This is Brajesh from Mobinius Technologies. When ever we are sending mails to our client those who are using Microsoft exchange server. Our mail are getting rejected as spam content . How to resolve this
issue. Please help us.

Hi,
According to your description, I understand that failed to send message to recipient and rejected as a spam.
If I misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether all account or some special account contain this domain experience this question, how about internal and external mail flow?
If this issue only occur on some special recipient, it indicate that target domain may be configured to reject your message, I recommend to contact its administrator to change the setting.
Otherwise, please try to enable protocol log to get more details about this issue. More details about Protocol logging, for your reference:
https://technet.microsoft.com/en-us/library/aa997624(v=exchg.150).aspx
Best Regards,
Allen Wang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

How can I configure Mac Mail to use the correct SMTP server?

I have successfully set up Mac Mail to use a new e-mail account. Inbound and outbound mail is working just fine. However, I am seeing something odd when I create a new message or reply to an existing message. The outbound account that shows is not that which has been configured for the account. I can manually select the correct outbound account.
What are my troubleshooting steps?

One of the first things to check in Mail Preferences, Composing:

I have problem to connect iChat. Sometime work and some time not working. When it was not working, there was a message on screen and said the mobile be server was not working. I needed to turn off computer and restarted the computer. Then it might. work

To whom it may help,
I use my iChat to do video chat with my granddaughter. I used to do iChat without any problem to connect with her in New York. However, After Mobil Me account closed, I accounted connection problems frequently. Sometime, I had to turn-off my computer then re-started the computer to make it work again. . When I had this problem to connect on iChat (the Mac did not allow me to choose "available"), the poped out window message said that " the iChat lost the Mobil Me account [email protected]" "The server connection was unexplected disconnect". Do you know what is my problem? My Apple ID for iCloud and previous Mobil Me account should be [email protected] I am no longer using [email protected] for Mobil Me e-mail address. My current iCloud e-mail address is [email protected] is no longer of using [email protected] account for my e-mail. If this is the problem, please let me know how to remove the [email protected] account from your system. Thanks!
David

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

Sip communicater - bridge - the server application is using only local ip..

Hi all,
I want to use the open source jvoicebridge sip communicater for my application development. but Iam testing it first if its working or not. My problem is that the bridge i.e. the server application is only using the local ip address like 192.168.1.2 but not the external ip like 122.161.153.97. Becoz of this the softphone running on client is not able to detect the server so not able to connect.
I want the server application i.e. the bridge to use the external ip address, so please guide me how to change the settings for that......................please help me .................

This sounds like an application specific problem. I suggest you contact jvoicebridge support groups [https://jvoicebridge.dev.java.net/contribute.html]

HT5996 Mail service on the OS X Server 4.0 works only locally

Similar Messages

Maybe you are looking for