HT6030 I am still having issues with GMAIL not syncing or moving it's duplicating items as I move them to folders and my inbox is overflowing now..... help?

according to the last update it was supposed to fix the gmail issue in apple mail with syncing/archiving/etc. now it is not only duplicating but still not syncing properly and moving emails once I've moved them/ My inbox is overflowing and this is NOT acceptable.

as rediculous as this is, I enabled "all mail" under the labels, then went into the actual apple mail settings and checked some box about updateing immediately (for deleted items) . then I had to quit mail then open it back up  - it "appears" to have synced properly. I'll let you know if it all comes back, but this is really a pain in the butt, I swapped from Entourage a few months back because it started acting weird with gmail.
anyone have any other mail options if this continues to not work? I don't want to have to pull gmail in my browser to move read items each day.
thanks for all the help.

Similar Messages

  • Having issues with itunes not syncing correctly

    ive been running into issues of itunes not wanting to sync my movies.When i try to sync movies, all of my music i imported from cds or files that were not purchased off of itunes gets deleted off of my phone.Im running itunes 12,and ios 8 on my 5s.Been happening alot recently and its frustrating!!!!! Ive tried managing my music and movies and that doesnt help out at all.Im having to download movies from icloud from my phone which at times is hard due to the lack of reliable wifi.Any help or ideas would be greatly appreciated

    as rediculous as this is, I enabled "all mail" under the labels, then went into the actual apple mail settings and checked some box about updateing immediately (for deleted items) . then I had to quit mail then open it back up  - it "appears" to have synced properly. I'll let you know if it all comes back, but this is really a pain in the butt, I swapped from Entourage a few months back because it started acting weird with gmail.
    anyone have any other mail options if this continues to not work? I don't want to have to pull gmail in my browser to move read items each day.
    thanks for all the help.

  • I am still having issues with the TOC. I finally got several chapters and sections to show different pictures in the TOC, but have spent hours trying to figure out how to repeat it. This should be so simple. Is there an update? Please help us Apple.

    I am still having issues with the TOC pictures. I got several chapter/section photos to show up, but can't seem to repeat this success. It is some mystery that happened during a time that I had practically given up. This should be such a simple thing. Drag and place a picture into the placeholder and it shows up in the TOC....right? Help, help help! want to get this thing done and it's taken two days of work just get some of the photos to show up. I am going to have to publish this ibook with no photos in several sections.....why can't this be simple? I have even had someone else spend hours trying to figure this out. This software is such a GREAT idea....come on...help with this little part of it.

    I had the same problem myself. I got to the point where I couldn't replace the photo, of a new chapter, in the TOC. What I did was to duplicate an existing chapter that was working and was able to replace it's TOC's photo. I also found that if you try different areas of the photo you can sometimes get it to replace correctly. For example, instead of dragging the new photo to the middle of an existing photo, try dragging it to the right top corner.

  • Mac Pro 6,1 STILL having issues with Open CL (4K scaling and SpeedGrade direct link grades)

    I've seen the staff responses to the issues of the new Mac Pro GPU saying that 10.9.4 fixes everything. For me, it has fixed my export issues, so I'm glad. I'm no longer getting lines and artifacts on my renders.
    That's great.
    However, I'm still having several issues, and they seem to be linked to Adobe and Open CL.
    Here's a video that shows what's going on:
    mac pro issues july 7 - YouTube
    Issue #1
    Like most of you probably, I'm doing 1080p exports of most things I'm working on. The first project shows a 1080p timeline with a mix of 4k, 5k, and 720p footage. Because zooming in so much on a 720p file in a 4k timeline looks so crappy, I'm doing 1080p timelines and scaling everything to the size it needs to be. I started in a 4k timeline then switched to 1080p because the 720p footage looked so terrible. However, in the 4k timeline, I didn't have any of the issues I'm showing in this first part of the video.
    When I switched to the 1080p timeline, I discovered a weird quirk: When I resize the 4k (or 5k) footage to the size it needs to be (which varies based on the frame I want), it goes back to the 100% view when I'm scrubbing through it. When I pause, the size of the video goes back to the way I set it. I show this in the video. Then I show what was my working solution for the time being: "scale to frame size", which brings all the videos to the size of the sequence frame size and works fine. Later, I turn off OpenCL in premiere and when I scrub through the video, it doesn't zoom back in or only stay at the size I set when stopped. For some reason all of these issues only happen at 50% scale or smaller. It doesn't happen at, say, 60%.
    I've tested this with raw R3D files and other 4K (or 5K) clips (even clips exported from After Effects) and the same thing happens. It doesn't seem to happen with 2.5k footage or 1080p footage.
    Issue #2
    This is the second project you'll see in the video.
    After grading in speedgrade (through direct link) I open my project back up in premiere and start playing it back. The video plays back with delays and frame drops. Now normally, this would be expected. But this is 1080p pro res footage, and this is just an effect added, and the yellow bar appears indicating that open CL should be accelerating the playback and it should do so smoothly.
    Maybe I was just wrong in assuming that a simple grade from speedgrade would be able to playback smoothly. I turn off the grade, and it plays normally.
    But then, when I turn off open cl and leave the grade on, the video plays back without ANY issues.
    So to me, it seems I'm still having issues with Open CL and adobe. I've found fixes that make it work temporarily, I don't need that kind of answer. However, I would like this to work. Is there something I'm doing wrong? Something I need to do to get this to work?
    Here are my specs:
    Mac Pro 6,1 (Late 2013)
    3 GHz 8-Core Intel Xeon E5
    64 GB 1867 MHz DDR3 ECC
    AMD FirePro D700 6144 MB (x2)
    OSX 10.9.4
    Firmware: 2.20f18
    What you're seeing is latest version of Premiere (CC 2014, v8.0.0 [169] Build)
    Everything here is ProRes 422, running from a Promise Pegasus2 R4 RAID (drives: 4x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST4000DM000) (that's thunderbolt 2).
    I've done everything: I've restarted my computer hundreds of times, I've reset NVRAM and PRAM and done power cycles.
    This isn't just some issue that started with 10.9.3 of OSX, the 4k issues happened when I first switched to a 1080p sequence back in February (2014) or so, which means it was an issue even with 10.9.2 and the previous firmware release.
    I've reported this issue to adobe.

    That crash appears to be casued by the Facebook plug-in.
    Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

  • Still having issues with my podcast feed in iTunes

    I am still having issues with my podcast feed. The podcast is not updating in iTunes yet I can see some of the new episodes through an alternative RSS.
    My podcast feed is
    http://feeds.feedburner.com/SosChurchStockholm.
    Not sure what I am doign wrong.
    Thankful for any help in this regard.
    Thanks

    I'm afraid I can't give you an easy answer. The Store has not updated since the episode of 10th November, but the later episodes appear when subscribing and there doesn't appear to be any problem with the feed.
    The Store does appear to go through sticky patches sometimes and take a long time to update some podcasts; it will probably catech up eventually and I'm afraid that there isn't really much you can do about it. You could try emailing Support ad podcasts 'at' apple.com, but I suspect you will get a form answer telling you how to add episodes (which you already know).

  • HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

    I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

    Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
    MacBook Pro
    (13-inch, Mid 2010)
    4
    4
    DVD
    DVD
    DVD
    MacBook Pro
    (15-inch, Mid 2010)
    5
    5
    4
    DVD
    DVD
    DVD
    MacBook Pro
    (17-inch, Mid 2010)
    5
    5
    4
    DVD
    DVD
    DVD
    Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

  • I m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help. i have told them nuumerous times that for better understanding i have made a video of it but no response.. really disspoint

    i m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help.
    i have told them nuumerous times that for better understanding i have made a video of it but no response..
    really disspointed with your customer support.
    i have uploaded them in google docs..links below.. t
    he first one happened on 30th of april 2014   https://docs.google.com/file/d/0B6z0lUXVGPGrc0tXNnZFaDQ3WDg/edit
    the second happened today. i called customer care but no satisfactory respose either.  https://docs.google.com/file/d/0B6z0lUXVGPGrSldEeWQ3aGFhaDA/edit
    who is going to help me out and atleast pay attention to what my problem is. apple seems to ignore my attempts to show them what is the problem... the dont even want to see the videos.. !! disgusting.
    its still under warrenty. please help.

    Take your iPhone to an Apple Store or authorized service center in the country where you purchased the iPhone and they will look at it and replace it under warranty if applicable.
    If you cannot take it person contact them to determine how to send them your phone.
    You can't expect them to replace your iPhone without first examining it.

  • Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second

    ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second page of icons,  black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

    I had this problem as well.  This is what I found by searching online.  I tried the fix on my nano 7th gen and it worked.  I hope this helps you.  Make sure to use two fingers for sliding and double-click the icons to get into settings.  Good luck.
    It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
    iPod nano (6th generation and later): How to use VoiceOver
    http://support.apple.com/kb/HT4317
    To turn off VoiceOver on iPod nano using VoiceOver gestures
    From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
    If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
    Slide one finger around the screen until you hear Settings. 
    Double-tap to open Settings. 
    Slide your finger up or down the screen until you see or hear General, then double- tap. 
    Slide your finger up or down the screen until you see or hear Accessibility, then double-tap. 
    Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap. 
    Double-tap when you hear "VoiceOver switch button on." 
    You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
    Note: You can also turn off VoiceOver by resetting your iPod.

  • I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

    I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

    I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
    If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail.

  • Issue with Calendar not syncing with iPhone 3g

    Issue with Calendar not syncing with iPhone 3g.
    Solution
    Create backup of your entire mailbox before starting (THIS IS IMPORTANT)
    Create offline folder (.pst file) Check windows help on how to do this for your version.
    Open folders view on Outlook
    Right click on Calendar in tree view and 'copy to' offline .pst folder
    Go back to main calendar view and delete all entries in your calendar.
    Create simple cal entry and sync test with iphone
    If this works then start dragging cal entries back from the offline folder into the main calendar then sync after each step....
    I moved events in this order
    -Yearly recurrences (ie Birthdays)
    - Monthly recurrences
    - weekly recurrences
    - Daily recurrences
    All appointments from the beginning of this year >> to the end of time!
    If all these sync then the issue is with an older cal item and you have to decide if you actually need these in you current calendar.
    I chose to leave these in the offline cal and if i need access them from there.
    If at any point the sync fails then you know you have a corrupt cal entry in the block you just transferred. Move the offending items back into the offline folder and try again in smaller chunks until you identify the offending items and delete them and manually recreate them in your real calendar.
    Also smart to run the inbox (.pst /.ost ) repair tools for your OS/Outlook version.
    Fixed so far
    XP Pro / Outlook 2008
    XP Pro /Outlook 2003

    I just updated the firmware to iPhone 2.0.1 and the syncing works great both ways.

  • HT4628 Still having issues with Lion os X and wi-fi

    I am still havign issues with Lion os X and wi-fi.   I have 3 domputers in my house including the new macbook pro that has lion os x installed.    The wifi drops out all the time (every 2 minutes).   I have followed all the instructions on how to fix this but I am still having issues.    The other two computers work fine,  one of the is Lion os X that has been updated but I managed to play with the setting and fix this one.   This computer worked fine on Snow leapard and then a soon as I installed Lion the wifi started having issues.
    When will apple make an update that is going to fix this problem.     You want to buy a new computer that works,  I took it into apple and they told me that it is my router,  but I know it is the software as there are 100's of blogs and threads about this exact issue occuring only when their computer was updated to Lion.
    Is there anything else I can do to fix this issue other then un-installing Lion and buying Snow Leapard?

    Does this problem happen with just your airport base station?  Do you have a 3rd party wireless router?  Can you duplicate the problem using any wifi access point?  Did your computer come with 10.7 preinstalled?  Did you purchase the applecare with your computer?

  • TS1569 iphone ios5.1 still having issues with Bluetooth

    Iphone Ios5.1 still having issues on Bluetooth connectivity.

    I lost The Bluetooth function completely two weeks ago. iPHONE IOS 5.1 .
    This is not a pairing issue, or wrong usage. Suddenly it didn't work in my car any longer. Resetting didn't help. I have tested against two other iPhones, my PC, my headset and my iPAD. (all this units have had BT connections with my iPHONE earlier)
    My iPhone Bluerooth is simply not working anylonger, not detectable and cannot "see" or find any other BT devices.
    Is this a software bug? Or simply a hardware error requiring physical repair?
    Cheers Rolf

  • STILL HAVING ISSUES WITH FLASH PLUG-INS & CRASHES

    I updated to the new 11.6 Adobe Flash and I am still having issues. I had the same issues, with the previous version of Flash Player. This issue occurs, multiple times daily. When I play a game on Zynga.com or Facebook (Daily), I either receive the message that the "Plug-in is not responding," or it Crashes. This then effects other websites, I have open in other tabs ie; Verizon.net, Adobe, etc. I have posted numerous Bug Reports on Google Chrome and one Bug Report on Adobe, without any results? It is EXTREMELY FRUSTRATING! It happens multiple times during a game, sometimes the plug-in issue resolves itself (only for a very short time) or it Crashes, or it doesn't do anything and I have to close the tab and re-load (refreshing does not work) or it just Crashes without warning and I usually lose data. I am not the only person, who has this issue RE: Game play on Zynga & Facebook. Any advice would be GREATLY appreciated. Thanks

    This seems to be an issue with Zynga games and the DEBUG version of Flash Player exclusively. I have always had to use the non-debug version of Flash Player when playing Zynga games. As such, this seems to be a problem on Zynga's end and therefore need to take it up with them.

  • Still having issues with animate composition showing in chrome

    I created a wonderful childrens activity page using animate.  For some reason everything shows up in the local preview, but once put onto a live host for public consumption, the animate portion of the paqe does not show up in Chrome.  It takes a few seconds in Firefox, IE, and Safari due to 4 Audio files but the composition is displayed once they are done loading.  It won't show period in Chrome. 
    When I first starting having the issue I noticed two 404 errors related to min.map files for jquery and edge.  I had a friend tell me that it had something to do with Chrome's unwillingness to work with local jquery hosted libraries.  I changed the publish settings so that the runtime files would refer to CDNs.  Even with this I'm still having issues.
    the 404 still exists for the edge file, but the jquery file is returning a 304 error now.  What is the deal with this and why isn't my work being displayed in Chrome?  Is this a bug? Or is there some kind of workaround for Chrome's inconcsistancy with this?  I really need this page viewable yesterday, so any and all assistance with this will be supererbly appreciated.
    The page in referenece is http://steamcurriculum.com/whatsmissing/index.html  and as you will see, only Chrome does not display the edge composition.

    Have you removed the page as i get redirected to http://steamcurriculum.blogspot.in/p/home.html/whatsmissing/index.html
    I do not see any edge realted content even in the source of this page

  • Mail 6.2 having issues with Gmail Imap

    I have issues with Gmail IMAP online on mail 6. Restarting Mail helps getting new messages but soon become offline and cannot be reset. Read may post and tried what was discussed but yet could not find any firm answer. The problem seems started new after upgrade to osX10.8.3

    Hey hikari07,
    If your Gmail account cannot be added to the iPhone, it might be locked, try unlocking it.
    https://www.google.com/accounts/DisplayUnlockCaptcha
    -Jason

Maybe you are looking for

  • Unable to load icm printer profiles in Lightroom 5

    I am unable to access correctly loaded RGB printer profiles in Lightroom 5.  In the print module when color management profile "Other" is selected no loaded profiles appear; and Lightroom usually freezes. Using Photoshop v6 on same computer I can acc

  • Reconstitute Component Tree

    How component tree was reconstituted? From jsp that have JSF tags or somehow else? I was read specification but nothing in detail about that. Is it define by specification or every JSF implementation can do it differently? For example page like this.

  • Oracle ODBC as user works but fails as 'SYS'

    Windows 7 Oracle XE 11gR2 From Windows, I can successfully create and connect with a system data source using an user Oracle account. But when doing then same configuration process I can not create or connect using the 'SYS' account. Understandably,

  • Lightroom 3 Slideshow Export

    I recently upgraded to Lightroom 3.6 from PhotoShop Elements. I tried to create my first slide show in Lightroom.  It took me a while to figure out that I needed a collection.  I finally got the preview to look like I wanted and tried to export this

  • Knowledge Warehouse Workflow problem

    Hello Experts, I have a deal with Internal Knowledge Warehouse in Solution Manager. My task is to make work 2 workflows "Approval" and "Copy Edit" for creation documents in 2 main project management transactions RMMAIN and SOLAR01 (document areas IWB