HT6030 Sound output issue with Mavericks

There is a sound output issue with Mavericks and Firewire800 Audio devices. I am using a MIO 2882 but now people are having issues with other devices as well. Is this something that will be addressed in an update? If not I will need to downgrade my OS.

maybe the adapter went bad.....fast. try getting one thats made by sony. or apple. i have had bad luck with some cheap products i bought.
or maybe thats the brand you have ad luck with. i remember when i use to get some quantom fireball drives, and they just died on me the next week. im down to two and keeping a good eye on them. especially fujitsu. the only ones i have GREAT LUCK with are Seagate and Western digitals drives.

Similar Messages

Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

Take each of the following steps that you haven't already tried.
1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
2. From the menu bar, select
 ▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
8. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

I use an older Macbook Pro from 2007 with OS X 10.7 – had issues with Mavericks, so I uninstalled it. I want to get a trial version of AE CS6 but I need to know the specs for it.

I use an older Macbook Pro from 2007 with OS X 10.7 – had issues with Mavericks, so I uninstalled it. I want to get a trial version of AE CS6 but I need to know the specs for it.

System requirements | After Effects

Any fix for the PC based network printer communication issue with Mavericks?

Any fix for the PC based network printer communication issue with Mavericks?

I just signed up for FIOS and am not experiencing your problem (had enough other ones instead).
Go to mail preferences ~ click on a mail account ~ click on the advanced tab. The only settings that worked for me were: port 110 SSL OFF, authentication: Authenticated POP (APOP). If I remember correctly when I first set this up another window opened and I typed in my password and never had to do that again.
Hope this helps.

Canon pixma mx922 compatibility issues with Mavericks?

Thinking of getting canon pixma mx922. Any body had compatibility issues with Mavericks?

Go to http://support.apple.com/kb/HT3669 for a list of printers that are still supported.
If you don't see the printer, check Printer software no longer available through Software Update.

Weird sound output issue

Hi everyone,
my main problem this time is that I hear no sound coming from the internal speaker of my G4 MDD 1.25 dual.
I have read some othe topics and I have trash the prefs and did the trick with the mini jack.
I have also install 10.4.11 over my old 10.4.11 using a combo update.
No results at all.
In sound prefs "choose a device for sound output" I see only Headphones.
If I plug a mini jack on headphones then I see the Line Out option!
If I plug in headphones they work normally, except I see the Line out option and I can hear sound including the startup chime.
Thank you!!
Message was edited by: Yiannis

I dont have a front headphone jack because I have remove the FPB due to a problem that we have talked here.Still no solution to that too
http://discussions.apple.com/thread.jspa?messageID=12900293&#12900293
In the AudioMidi Setup I have the followings:
http://img408.imageshack.us/img408/3544/picture1xnn.png
Message was edited by: Yiannis

Fix for WebHelp output issues with IE 11 breaks Search function

I use RoboHelp HTML 9 and have been having issues with generated WebHelp in IE 11. The TOC was totally blank and the Search tab looked fine but did not function. Everything worked fine in Firefox. After much experimenting and online research in these forums and elsewhere, I have been able to get the TOC to display properly in IE 11 (and Firefox) but the fix has caused the Search tab to stop functioning as per this other forum post RH9 Webhelp Search function is not working properly.
I need to have BOTH TOC and Search displayed and functioning properly but in order to get the TOC displayed properly I had to change the Preferred Format setting to "Pure HTML" and, according to the post mentioned above, that is what messes up the Search function. Is there a solution that will allow both TOC and Search to function properly?
Here is a summary of the steps I have taken to get to this point:
Tested WebHelp output from two different projects of my own as well as the Salesbuilder starter project - all would display/function properly in Firefox but not in IE 11 (blank TOC and non-functioning Search).
Found a "patch" for RH10 for the exact problem I was having with RH9 but was not able to find a version for RH9. Since the patch included 2 files (whutils.js and whver.js) only, I backed up these files in the RoboHTML\WebHelp5Ext\template_stock directory and replaced them with the new ones.
Regenerated one of my RoboHelp projects - still didn't work in IE 11 and now didn't work in Firefox either!
Tried turning on Mark of the Web but this did not help and would not allow opening PDF's which is necessary to one of the projects so I turned it off again.
Changed Preferred Format setting to "Pure HTML" instead of "DHTML" and the TOC displayed and functioned properly in IE 11 and Firefox! Hurray!!
Celebrated for 10 seconds until I clicked on Search tab and saw the input box filled with letters of the alphabet with other random letters, words, numbers below. It looks almost like an index but neither of my projects uses an index and I have not generated one in either project.
Found the post mentioned above which states that the solution is to change the Preferred Format setting back to DHTML but when I do that I am back to blank TOC and proper-looking but non-functioning Search!!!
I have now removed the Search tab from the output of one of the projects since it is not really necessary but I need to find a fix for this for my other project.
Both of my projects are run locally - one is release documentation that is distributed on a CD and the other is CSH which is loaded on the local server with the software for which it was created.
Dorothy
Note to Administrators: Sorry, but I originally posted this as a reply to a previous post - Contents, Index, & Search do not display in generated help... - so perhaps it should be removed from that thread to avoid confusion.

The "preliminary" fix provided has worked perfectly! All versions of my WebHelp project now display TOC properly and I was able to change the Preferred Format setting back to DHTML so the Search tab both displays and functions as it should. I am very grateful to William for providing this fix which works in both IE 11 and Firefox. Someday I will pursue the fixes to make it work in Chrome as well.

Scanning Issue with Maverick and Office Jet Pro 8600

Just wanted to add my voice to the numerous problem reports. Specifically:
1) I could scan just fine until I upgraded to Maverick (Mac OS 10.9)
2) to address the problem, I downloaded the latest HP drivers for 10.9-didn't help
3) Tried to use the separate HP Scan application-no luck; couldn't fine the computer (even though I have been printing regularly)
4) Based on the HP problem solution posting (which seems a bit out of date), tried to uninstall the software and reinstall; the uninstall would not complete, although it did delete all of my printers.
It appears that it is finally time to abandon HP for printers, if they can't keep up with Apple's releases.

Hi amaltz,
I understand you are having an issue with the scan software working with Mavericks. I can't help you with this. My suggestion is to completely remove all HP software from the computer and reinstall. Follow the instructions below to resolve the issue.
Scrub
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
Hold down Control, Option and Command
While holding the three buttons down, Click uninstall.
Reset Printing System
Click the Apple icon ( ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions (I know many of you have done this but because we have now done a scrub it is good measure to ensure non of your permissions differ)
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
Restart the computer.
Now you will have a fresh start and be able to reinstall the software. Please let me know if this resolves the issue you are experiencing. If it does not, I will gladly follow up.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Are there any compatibility issues with Mavericks and EMC Celerra File shares, particularly with the SMB protocols?

Our company uses a EMC Celerra file share, but most of our users are Windows based. We have a small production department of 7 macs. Starting with Snow Leopard, we noticed some issues with SMB. We were able to resolve those issues, but had to wait to upgrade to Lion because there were additional SMB or permissions concerns with the Celerra file share and Lion. Now, we are again waiting to upgrade to Mavricks because of the way it handles user permissions. Does anyone using Mavericks now also connect to a EMC Celerra file share? Thanks!

Our company uses a EMC Celerra file share, but most of our users are Windows based. We have a small production department of 7 macs. Starting with Snow Leopard, we noticed some issues with SMB. We were able to resolve those issues, but had to wait to upgrade to Lion because there were additional SMB or permissions concerns with the Celerra file share and Lion. Now, we are again waiting to upgrade to Mavricks because of the way it handles user permissions. Does anyone using Mavericks now also connect to a EMC Celerra file share? Thanks!

HDMI sound output problem with gtx670

Hello again!
I have recently purchased a brand new Samsung TA550 LED monitor to use with my Mac Pro desktop. My Pro posesses a GTX 670 graphics card with (obviously) an HDMI output channel. The thing is, when i plug the hdmi cable on the card and on the monitor and configure the monitor for the appropriate video settings, there is no audio. Then I go to the system preferences ----- sound------ output, and there are no options for hdmi or my tv/monitor.
Does anyone know whats goin on?
Thanks

It is flashed? or it is a straight PC card. And while there is support (you probably want to check other threads and sites and wait a day to upgrade to 10.8.3) some PC cards will not act and behave the same as say under Windows.
I would contact MacVidCards (ebay and MacRumors forum) and see if he can flash it or knows more.

Adobe Premiere Pro Issues with Maverick

Hello Apple friends, photographers, and video editors
Since I installed Maverick, I have the following issues with Adobe Premiere Pro CS6:
Why in **** did I update before waiting 6 months...
- browser window flashes on then disapears when importing new files.
- browser window sometimes shows all items gryed out when importing files.
- cannot "Link Media" by example multiple TIFF and one EDL file for subtitles. 1st time menu quickly appears then disapears, then all is greyed out.
I have a mid 2012 Macbook PRo Retina with SSD @ 50% capacity. All else is extremely fast.
All my Adobe Master Collection CS6 is up to date.

Suggest you post on the Adobe forums since it's their software you're having issues with.

Are there any issues with Maverick and Canon Pro10 printers

Are there any issues with Canon Pro10 printers, Dymo 450 LaserWriter and Epson SX400 with the new Maverick?

Try searching these forums and "Googleing" those devices on the web.....
Barry

USB drive issues with Maverick

Good day Apple friends,
Since I installed Maverick I have numerous issues with my Macbook Pro-Retina mid 2012.
When I connect my usual USB drives they don't react the first time. I always have to deconnect and immediately reconnect to make it work.
It is not a question of delay, it is a question of 1st or 2nd time. I basically go: connect, disconnect, reconnect and voilà!
It happens with many 2-4-8 GB USB sticks which were fine before Maverick. It does NOT happen with SD cards though.
Why?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Sound / Audio issues with Google Chrome

Hi guys,
I have this audio issue with a new Macbook Air (2013 base model).
When I stream audio / video (eg podcast, YouTube, NBATV) via Google Chrome, there is the static or clicking sound which you could hear both through the built in speakers and through the headset.
Brought it in to the Apple Store yesterday and they acknowledged the sound on Chrome. HOWEVER when using Safari, this clicking / static sound is no longer audible. I can probably record an audio clip to demo this further. The genius concoluded that this is probably an issues with Chrome or codecs that its using rather than the actual laptop. No replacements at this stage.
I have an old MBA 11” where this issue does NOT occur.
The hesitation in using Safari is Flash. Some video streams such as NBATV, which I watch quite frequently use Flash. Chrome handles this quite well, with no separate installs required.
Has anyone else encountered this? Not sure if I can pursue this issue further with Apple.

Chrome shockwave flash plugin issue causing sound problems on the macbook:
Shockwave Flash 11.5 r31 (old version)
Shockwave Flash 11.5 r502
disabling r31 solved it.
Many people have checked their chrome plugins and found they had two plugins enabled. They disabled the older one and audio is perfect.
-Go to chrome://plugins
-Click and expand +Details in the Upper Right
-Check over the flash files.
-One is version 11.3.31.222
-Disable the odd version and reload the flash content
For some reason, CHROME has allowed two flash plugins to be enabled at the same time, and clearly the older version is the one causing the problems.
go to "Chrome://plugins" tab. Click “Details” at the upper-right corner of the page.
Find “Shockwave Flash” listing for the integrated plug-in on the page and click the corresponding “Disable” button. To identify the integrated plug-in, see the table of plug-in filenames above.
Find the “Flash” (or “Shockwave Flash”) listing for the system plug-in on the page and click the corresponding “Enable” button. To identify the system plug-in, see the table of plug-in filenames above.
disabling Shockwave Flash 11.4 r31 resolved the problem for most people.
When people double checked: if they re-enable Shockwave Flash 11.4 r31, ....the distorted / broken audio happens again.
Hope that solves it for you

Mail issues with Mavericks

I have just installed Mavericks on my MacBook Pro running OSX version 10.9. I am now unable to view and open incoming mail. From the menu I can create a new message.The icon indicates that mail has arrived into the mailbox. When I click on the 'Mail' icon it brings up the menu bar only.

Hello Tom
Start with the article below for troubleshooting issues with Mail and your outgoing server.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Regards,
-Norm G.

HT6030 Sound output issue with Mavericks

Similar Messages

Maybe you are looking for