HT6067 How can I connect 5.1 surround sound speakers to my Mac Pro?

How to connect 5.1 surround sound speakers without a receiver to my Mac Pro, so I can test and hear surround sound files I am creating?

As far as I know, the only way to do that is with the digital out, toslink I believe(1). . Currently there are very few external usb soundcards that are known to work with Mac and produce 5.1 sound, perhaps Diamond Multimedia or Zalman?. Analog surround really doesn't work (green, yellow, black cords)*. So, maybe, Garage band/VLC? or the dvd player might be the only things I know that could produce 5.1 sound, but I could be wrong.......
(1) You will need a speaker set with an optical input...
* maybe try this--i think it's called an " HD audio rush " box and it converts digital to analog audio 5.1 supposedly-, you can look on ebay for similar things
sorry I couldn't be of more help
John B

Similar Messages

Optical audio and surround sound speakers for my Mac Pro

In the back of my Mac Pro there's an in and out for Optical Audio. What is this and are there any surround sound speaker systems out there that will plug into it? Most surround sound speakers seem to require a PC-style triple-input, with three jacks (Green to front, Orange to centre and Black to rear channels). Very few surround sound systems have the additional option for a single headphone socket-style jack, and I'm not sure if they will work terribly well with this single connection.
Can anyone recommend some speaker choices, particularly in the UK, that will give me good surround sound from the optical audio or single headphone jacks? Many thanks.

You might want to look at a device called the Griffin FireWave: [http://www.griffintechnology.com/products/firewave]
It connects to your MacPro via firewire, and has the green/orange/black jacks out to a standard 5.1 speaker system.
It comes with a software application that lets you customize the sound, and also synthesize surround from mono, stereo, etc., sources.
It would definitely open up your choices for speaker systems. I'm using one with a Klipsch 5.1 Promedia set of speakers. Works and sounds great.

HT3887 How can i connect my Dr Dre wireless headphones to my mac pro,

when i try connecting my headphones to my mac it keep saying that there was an error

Even thought it say WEP, it will also support WPA (but not WPA2).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can I tranfer a PDF file to Word on my mac pro?

how can I tranfer a PDF file to Word on my mac pro?

There are a number of pdf converts for the mac. Search macupdate.com or appstore for them. Here's two developers that make pdf tools:
Cycle Development
Wondershare

Hi I am new on the Mac, I need help, how can I run my apps from my library on my Mac Pro? All my apps I was used in my iPad, thanks guys!!!!

Hi I am new on the Mac, I need help, how can I run my apps from my library on my Mac Pro? All my apps I was used in my iPad, thanks guys!!!!

The Mac OS X and iOS versions are separate products

How can I connect my existing firewire drives to the "new" Macbook pro

I'm thinking about getting a new Macbook Pro, to take on the road.
I already have four external drives with firewire and USB 2.0 ports.
After I looked at the new machine I noticed it only had USB 3.0 and Thunderbolt ports.
I dont see any Firewire to Thunderbolt technology out there nor do I see any USB3.0 to anything technology. How can I connect my drives to the new system?

You can use the USB3 connections for USB2. That's downward compatible. Just runs at USB2 speed.
Just this week apple announced a couple of TB adapters, TB-to-ethernet and TB-to-firewire. But the FW adapter is not at the apple store as yet (at least at the time I am posting this).

How do I connect a Maverick imac and a snow leopard mac pro file sharing

I am trying to connect an imac running Maverick, and an older mac pro 1,1 running snow leopard. The mac pro does not have airport. I have tried connecting using my wireless router: mac pro ethernet conencted and wifi with imac, but I either cannot connect or it takes forever. I need a more reliable solution. I bought an airport card for the mac pro. I hurt my foot, and am laid up, and have to access the massive files on the mac pro and external drives with the imac. They are about 75 feet apart. The imac uses the wirteless router just fine, which is next to the mac pro. Which is the better solution, buying a long enough eitehrnet cable, and direct connect, or install the airport card and connect using airport? One more concern, I noticed my neighbor has a mac, and his mac keeps showing up on the network as a lockede but selectable mac. I am concerned about my security. Which is best, and what is the sequence to set it up? I can see that a step by step process with proper sequence and settings is critical to get tis to work. Thanks for any help.

How are you currently trying to connect? The easiest method for setting up across operating systems would be to connect using AFP, the standard protocol Macs use to share files over a network (though, SMB2 is now the default method in Mavericks). Are you attempting to simply transfer data from one machine to the other, or set up a local network between these machines? If it is the former, the easiest method may be to use an external HDD to copy data from one machine and then transfer it to the other.
See below for AFP:
Mac Basics: File Sharing - Support - Apple
And a youtube video:
Mac 10.6 OS X Tutorial - File Sharing -AFP FTP and SMBS - Video ...
One more concern, I noticed my neighbor has a mac, and his mac keeps showing up on the network as a lockede but selectable mac.
This is normal. You would need to explicitly grant your neighbor access to your machine for him to access anything on the machine, just as you need to do the same with your own computer you are attempting to connect.

How can I boot from USB 3.0 disc on a Mac Pro 2013

I am just setting up a 2013 Mac Pro with a 4TB USB 3.0 external drive. I have cloned my boot disc over to it but have problems being able to boot from the USB drive.
It shows up in the startup disc in system preferences, but when selected as the boot disc and restarted it just boots from the internal SSD. Also have checked booting and holding the ALT key to see what happens but I am just shown the SSD and Recovery disc as options to boot from.
So it appears I can not boot from a USB disc on my new Mac Pro, is there a solution to this problem?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

How/Can I install WINDOWS 7 64BIT on a 1st Generation Mac Pro ?

Hi, Is it possible to install Windows 7 64 bit on a 1st Generation Mac Pro 2.66Ghz? Apple suggests that it's not possible and yet I've seen several Googled posts where the users have successfully installed 64 bit on a 1st Generation Mac Pro. The problem is that they've done this creating a bootable iso disk(whatever that is) using a Windows computer with imgburn and windows commands. I'm pretty good at following instructions but I haven't seen any instructions on how to install Windows 7 on this machine using a Mac based approach.
I'm using BootCamp and was able to partition the drive into NFTS and "proceed" with installation; however all te installations failed during setup and Windows would not boot; disk repair was not possible. Besides, from what I've gathered, 32 bit is problematic around memory issues.
When I try installing 64 bits, I never get past the "select cd rom 1or 2" message where the keyboard won't work. It is at this point where others say they have successfully proceeded with moving forward by creating a bootable iso disk.
Problem is it's all Windows based with exe files and presupposes I already have Windows running.
I'm not sure I really understand how to create an iso disk, but I do have ROXIO TOAST 10 which is capable of burning "ISO" disks.Does anyone know how to do this and/or can you point me to a place where there are instructions on how to proceed?? While I realize Apple says that some mid 2006 mac pros aren't supported, there are multiple posts of windows users successfully installing Windows 7 on a 1st Generation Mac Pro.
Thanks.

I have a March 2009 Mac Pro dual quad core running Win7 Pro 64 bit. I have Windows installed on a dedicated internal hard drive. There are no partitions, the entire drive is for Windows use.
Here's how I installed it, I did not start with BootCamp. Make sure the drive you're going to use for Windows doesn't have any important files on it because it will be formatted.
1. Update Snow Leopard
2. Place the Windows cd in the Super Drive
3. Shut down the computer
4. Remove all the hard drives except the one you want Windows installed on. Keep track of the order they are in and at the end replace them in the same order.
5. Boot the computer holding down the Option key
6. Boot to the Windows cd
7. Install Windows and format the drive to NTFS
8. When Windows needs to restart during installation you'll need to hold the Option key and boot to Windows, not the Windows cd.
9. After Windows installs, place your Snow Leopard disc in the Super Drive
10. The Drivers for Windows will be installed along with a Windows version of BootCamp.
11. Go to Start > All Programs > Apple Software Update
12. Update again until it's done.
13. You'll also find a BootCamp under Control Panel, check it out.
14. Shut down the computer and replace the hard drives in their original order
14. Now if you turn on the computer it will boot to Snow Leopard, but if you hold the Option key during boot you can select Windows or Mac.

How can I move my three SATA HDDs to the new Mac Pro without backing up?

Hello,
I am doing initial shopping for the new Mac Pro but have come to the frustrating realization that I cannot move my HDDs to the new computer for free. Sure, I can migrate my OS drive to the new one, but my other three disks inside my 2007 Mac Pro are in a pickle. I want an economically viable method of getting those three drives to the new Mac without backing them up, formatting or something like that. Also, I would prefer a transfer method that will rival the speed of it being internal. I don't think USB 3.0 can do this, but Thunderbolt 2 can? Everything I've seen online has been outrageiously expensive or requires me to reformat (RAID).
What I'm looking for:
Connect three or more HDDs of various capacities to new Mac Pro
Have the transfer speeds rival or exceed that of my current grandpa computer (Mac Pro 1,1)
Have it not be incredibly expensive (anything over $300 is ridiculous)
Have it be no more than two devices, one prefered unless they are individual enclosures that can either daisy chain and/or are inexpensive.
Safe for my drives.

> a 3 TB, a 1.5 TB and a 500 GB.
Most 3TB drives are going to be "green"
The 1.5TB may or may not
The 500GB is likely old, due for retirement if not worse.
A pair of two drives of 2TB likely would be enough for now and plenty of dual drive USB3 cases.
For a single drive and Thunderbolt docking adapter for using one drive at a time:
http://www.amazon.com/Seagate-Backup-Portable-Thunderbolt-Adapter/dp/B009HQCARY/
Under $300 case
http://eshop.macsales.com/item/OWC/METB7DK0GB/
Or this one is fine and USB3
http://www.amazon.com/StarTech-com-External-Enclosure-3-5-Inch-SAT3520U3SR/dp/B0 09C5VSFU/
NO backup? You DO have some backups I hope, or you are on thin ice or walking tight rope.
Some helpful guides on USB3 vs TB
http://www.macperformanceguide.com/topics/topic-USB3.html
http://www.macperformanceguide.com/index_topics.html#MacPro2013Transition
http://www.macperformanceguide.com/topics/topic-Thunderbolt.html
1TB WD Blue go for $60?

How can I save my media/data to alternate HD in Mac Pro?

Hi folks,
I have recently become the proud owner of a new Mac Pro. I'm really enjoying the Mac experience since buying a Macbook before Christmas to test the water.
I have a quick question that I hope someone may be able to help me with. I have a Mac Pro with two hard drives. My intention is to use one HD for system/applications and the other for media/data (with an external HD for backup).
I can't figure out how to tell OSX that I want to save all of my photos/videos/iTunes library on the "other" HD (i.e. not my system HD). I'm sure this is a "dumb" question but could someone please point me in the right direction?
Cheers,
Simon

Hi, Simon.
You can instruct iTunes and iPhoto to save their respective libraries to a different disk, e.g. your second hard drive. You can also move existing libraries for these apps to a drive other than your startup disk.
See the links concerning moving these libraries cited in the "More ways to save space if you have a spare partition or second hard drive" section of my "Freeing Space on your Mac OS X startup disk" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

How can I change the administrators original password on my new mac pro?

How can I change the administrators original password if I've forgotten it.

IflyDavie wrote:
I need help to delete my icloud account from my iPad. It has "Find my iPad" on it and won't let me delete without the old password. I don't want to reset password as it will require reset of Mac Book Pro and 2 iphones. Help appreciated.
Your description of the problem is a bit confusing. Do you have ONLY ONE Apple ID or do you have MORE THAN ONE?

How can I run my adobe cs 5.5 on a mac pro running 10.10.1 ? it keeps prompting me for java 6 but I have java 8...

I am trying to install my adobe 5.5 on my mac pro running 10.10.1 but it will not run unless it has java SE6 but I have java 8 and I dont want to downgrade. please advise me how I can resolve this. I do not want to pay for a newer version of CS and I don't want to use the cloud .

Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium

HT4527 how can you move songs from your iphone 4 to a mac pro laptop??

My Itunes decided to update itself without my consent and while it updated it erased my songs. I have an Iphone 4 and I want to put the songs inside my Itunes in my Mac Pro how can I do that?? not all the songs I have on my phone are bought.

It has always been very basic to always maintain to always maintain a backup copy of your computer. Use your backup copy to put everything back.
The iphone is not a backup device. The music sync is one way - computer to iphone, The only exception is itunes purchases: File>Transfer Purchases

How can I load Numbers 2.3 or iWork from my mac pro to my new Mini??

Hi guys. I want to load numbers 2.3 onto my new mac mini running Mavericks. I want 2.3 and 3.0 to run side by side as I have seen others do here.
My Mini has only ever had 3.0. I copy and pasted iWorks over, however it did not work though comes up with compatibility error.
the app store did allow me to update from this method though.
My mac pro is running 10.6.4 with iWorks 09 running beautifully.
I was told about trying Migration Assistant, did not work either, My ex HDD has TM for both on there and when I open MA it only recognizes and asks about
importing from the mini backup only. It is not reading the mac pro backup.
Any ideas or suggestions are much appreciated.
I have attempted downloads from net with no avail, I am giving my cc numbers to pple when they say 'I will not charge you'....
one download was an issue because osx no longer supports ppc power pc games - claytons hard drives on computer.
Thanks and enjoy.
I see my other question on moving tables between sheets is stumping ppl, a few views no responses, Is it POSSIBLE???
Jason. Dream Big and achieve everyone.

Not sure it will work - it might have to do with the licensing requirements; any app downloaded through the app store can be run on as many Macs as you own and control. However, yours is still the old version of iWork which has an older, separate agreement. Applicable excerpt here:
Entire SLA here:
http://www.apple.com/legal/sla/docs/iwork.pdf

HT6067 How can I connect 5.1 surround sound speakers to my Mac Pro?

Similar Messages

Maybe you are looking for