HT6114 10.9.2 update internet sharing issue

Hi, is there an issue with the internet sharing after the os x 10.9.2 update cause my internet sharing

Thanks for the response....
Yes it did restart and showed the progress bar....down to "1 minute remaining" ....then the message disappeared...the progress bar wa app 90 blue...I got excited....but to no avail...I restarted via power off button about 5 minutes ago as I cannot wait any longer....
The installation went smooth and quick on my ols MBA 11" 64G...
I checked now : the current verson on the new MBA is OX 10.9 ....could that be the problem ...should I first do the 10.9.1 update?
Also : yestersday I purchased and downloaded (via internet) Mac Office 2011 Home & Student from MS...thus a 3rd party app...could that be the problem?
Although : I also have that app on my old MBA (installed via CD)....cuased no problem...
Thanks for your time!

Similar Messages

Nokia 520- Internet Sharing Issue After WinPhone 8...

I recently updated my Lumia 520 (AT&T) to WinPhone 8.1 OS. Since the update was installed, I am unable to turn on my internet sharing (mobile hotspot). I receive the following message on the screen, "Connect not shared. To enable tethering on this device, go to att.com/mywireless or dial 611." I have spoken with AT&T technical support on several occasions and they do not see an issue with my plan. I also have a second device (another Lumia 520) on my plan that was currently running WinPhone 8.0 and successfully sharing internet as a mobile hotspot. Today, I manually updated the OS on that device to WinPhone 8.1 and as expected, the internet sharing functionality stopped working after the update.
I have looked through various message boards and posts related to similar issues, however I cannot find one that is directly attributed to the WinPhone 8.1 update.
Any ideas or assistance would be greatly appreciated.

Thanks Abi99
After I pulled the battery to get the product code, the error message when I try to start ICS changed to: Connection not Shared. Internet sharing isn't currently available
I am still on AT&T. However, I ported the number (not the device) out to T-mob and then back to AT&T 3 weeks later. I used the 520 on WiFi in the interim 3 weeks, and during this time, it received the 8.1 update notification, and I installed 8.1.
Which connection profile is choosen in Lumia » menu » settings » celluar+SIM » SIM settings?
Active network: AT&T
Data Connection: On
Don't Roam
SIM Settings: SIM
No data under APN settings (all fields empty)
add internet APN » APN wap.cingular » save » power off » power on: Does it work?
Tried, doesn't work
add internet APN » APN phone » save » power off » power on: Does it work?
Tried, doesn't work. But after this change, the error messgae goes back to the original one:
Connection not shared. To enabled tethering on this device go to ; http ~ or dila 611

Internet sharing issue on Mac os version 10.9.1

Hello,
I am facing problem with internet sharing(WI-FI) , previously it was worrking fine till yesterday(09 March 2014) , but i deleted one file"com.apple.mDNSResponder.plist " from location" /System/Library/LaunchDaemons/com.apple.mDNSResponder.plist" because i can not see the home sharing option in my connected ipad and iphone.
after that internet was completely stopped in iMac. since i had a backup of this file in my time machine ,i took that file and place into the correct location (note : it was old file). Now the problem starts internet sharing was completely stopped even i can not browse in my ipad(i use to connect ipad with shaing network) ,After reading an artical to solve this issue i delete another file from "/Library/Preferences/SystemConfiguration/com.apple.nat.plist" then i restart the system ,now internet sharing is not working at all , devices are connected with shared network but its not working (please excuse for my english). please help me to solve this issue. please see the attachned log for more detail:
10/03/14 3:18:32.125 am configd[17]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en1) failed: Device not configured (6)
10/03/14 3:18:32.125 am configd[17]: DHCP en1: INIT transmit failed
10/03/14 3:18:37.060 am configd[17]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en1) failed: Device not configured (6)
10/03/14 3:18:37.060 am configd[17]: DHCP en1: INIT transmit failed
10/03/14 3:18:43.000 am kernel[0]: 1002.576646: osif_connect_event: sta: 4c:b1:99:28:ad:aa arrive message posted
10/03/14 3:18:43.000 am kernel[0]: 1002.596315: Invoking setSTA_AUTHORIZE
10/03/14 3:18:43.670 am bootpd[518]: DHCP REQUEST [bridge100]: 1,4c:b1:99:28:ad:aa <Raghus-iPad>
10/03/14 3:18:43.670 am bootpd[518]: ACK sent Raghus-iPad 192.168.2.5 pktsize 300
10/03/14 3:18:43.671 am bootpd[518]: service time 0.000865 seconds
10/03/14 3:18:45.180 am configd[17]: [bootp_transmit.c:213] bootp_transmit(): bpf_write(en1) failed: Device not configured (6)
10/03/14 3:18:45.180 am configd[17]: DHCP en1: INIT transmit failed
10/03/14 3:18:47.091 am configd[17]: set_arp_linklocal(en1) SIOCARPIPLL 1 failed, Resource busy
10/03/14 3:18:47.096 am configd[17]: network changed: v4(ppp0:100.84.93.66) DNS Proxy SMB
10/03/14 3:19:15.034 am configd[17]: PPPController: readn, retry 10, errno 35.
10/03/14 3:20:17.408 am apsd[79]: Unrecognized leaf certificate
10/03/14 3:20:37.695 am configd[17]: inet_set_autoaddr(en1, 1) failed, Resource busy (16)
10/03/14 3:22:45.640 am configd[17]: inet_set_autoaddr(en1, 1) failed, Resource busy (16)
10/03/14 3:22:56.922 am TATA DOCOMO 3G[270]: addCSQWithModuleId:mQueue count = 0
10/03/14 3:22:56.922 am TATA DOCOMO 3G[270]: addZPASWithModuleId:mQueue count = 1
10/03/14 3:22:56.922 am TATA DOCOMO 3G[270]: addZDONWithModuleId:mQueue count = 2
10/03/14 3:23:28.000 am kernel[0]: 1286.952006: Invoking getKEY_RSC
10/03/14 3:23:28.043 am configd[17]: PPPController: readn, retry 10, errno 35.
10/03/14 3:24:00.028 am configd[17]: PPPController: readn, retry 10, errno 35.
10/03/14 3:24:53.894 am configd[17]: inet_set_autoaddr(en1, 1) failed, Resource busy (16)
10/03/14 3:26:00.980 am login[544]: USER_PROCESS: 544 ttys000
10/03/14 3:27:00.028 am configd[17]: PPPController: readn, retry 10, errno 35.
10/03/14 3:27:02.277 am configd[17]: inet_set_autoaddr(en1, 1) failed, Resource busy (16)
10/03/14 3:28:00.027 am configd[17]: PPPController: readn, retry 10, errno 35.
10/03/14 3:28:28.000 am kernel[0]: 1586.952441: Invoking getKEY_RSC
10/03/14 3:29:11.804 am configd[17]: inet_set_autoaddr(en1, 1) failed, Resource busy (16)
10/03/14 3:30:57.684 am TATA DOCOMO 3G[270]: addCSQWithModuleId:mQueue count = 0
10/03/14 3:30:57.685 am TATA DOCOMO 3G[270]: addZPASWithModuleId:mQueue count = 1
10/03/14 3:30:57.685 am TATA DOCOMO 3G[270]: addZDONWithModuleId:mQueue count = 2

Hello All ,
I have solved this issue by replace the file "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist". i took this file form one of my friend and place to the original location and restart the system and it works perfectly.
Here i have also solved the internet home sharing , I just provided the DSN IP in WIFI and start the internet sharing all the devices get connected properly.
Thank you All for your support.

IMac and internet sharing issue

Under System Preferences_Internet & Sharing_Sharing, I have the internet sharing box checked, along with screen sharing. Whenever I turn on my computer, the internet sharing is disabled, although the box is still checked. Once I re-check the box, it starts up again. What gives?

Everyone I found the answer after I posted my own comment re localhost...got me thinking.
I checked /etc/hosts file and in there was a loopback to localhost
127.0.0.1 somewebsite.com
WOW...how the heck did that get entered as I never edited this file??
Now all works fine.
Thanks everyone for your assistance.
Here is a link to where I originally found the clue

AD HOC Internet Sharing Issues

I was delighted when i found out that my MBP could put out a wireless signal for the touch to use as im not in the location for one in my university halls. However although i can access some websites, the majority being search engines, google, yahoo, wikipedia, etc. i cannot go further than that, for example i can go to google, search IPod, look at the results, but not access any of them. The youtube application never loads videos even though sometimes it will find search results. Also i cant get on to the apple website, one of the default bookmarks. Is this due to the integrity of an ad hoc network? Or is there something odd?
I ask this mainly on the basis that it loads the search engines up in a matter of seconds, but then completely times out on the next step of accessing results.
Help for a noob would be much appreciated.
Tim

To elaborate a bit, a more Mac kinda guy than I am confirmed that internet sharing makes the mini act as a gateway, but not a router, which is obviously what I need. Is there a convenient way to get it to act as a router, or do I need to spend some quality time with ipfw?

Sudden Internet Sharing Issue From Laptop to Tower

I have a laptop ibook G4 running 10.5.7 that is connected successfully to wifi.
Until yesterday, I was sharing successfully with my G5 tower running 10.4.11.
I restarted my laptop last night and it wouldn't connect. I checked my settings under 'network/airport' and light was green and I got an IP address. I also saw 'network/ethernet' showed green and had a different IP address (not sure it is supposed to do that, but I'd assumed it was the IP address for my tower)
Anyway, I unplugged the ethernet going to the tower and my laptop started working.
Now, as soon as I plug the ethernet cable up, the laptop acts like its not connected.
I turned 'network/ethernet' to off and that makes my laptop work again...
Does this sound normal?
My tower's prefs arent identical since its 10.4.
I'd had both set to sharing/internet/ethernet and it's worked for weeks. I'm not sure what the current problem is a result of. Should my laptop 'network' settings be set for airport only? Or do I need to monkey with the 'ethernet' too? Should both computers be set for 'sharing' with built-in ethernet, or just the laptop?

First update your Mac OS. This issue may have been solve in one of the recent updates.
Second, be sure that the router firmware is up-to-date. This sleeping issue was common when Leopard first came out. Many of us had it and it was resolved by updating router firmware, or replacing old routers. I include myself in that group. The problem disappeared after updating both my routers.
I would also ignore WEP encryption. It takes a few minutes for anyone in range to hack it.
If your router does not support WPA2, then it's too old and you should replace it, killing two birds with one stone, so to speak.
Any router sans WPA2 is simply too old for today's OSs, and Leopard is very demanding when it comes to router security.

Bluetooth Network and Internet sharing issue

I'm trying to set up a network through Bluetooth between two computers having the latest Toshiba Stack installed, and to share the Internet connection with the second computer.
On the firs computer I've set the Internet Connection Sharing, and because of this it automatically sets the TCP/IP adresses for the Bluetooth Personal Area network (192.168.0.1).
On the 2nd computer, i've set everything to obtain it automatically. Firewalls (Kaspersky) disabled.
When I connect the 2 Bluetooth devices, everything looks fine, the 2nd automatically obtains the IP adress, I can ping both computers, and the Internet also works on the 2nd computer, for a few seconds! After that, it appears like the 2nd computer is disconnected from the network... what could be the problem?
In the event viewer under the System tab, I've found Informations like these:
2nd comp:
The system detected that network adapter \DEVICE\TCPIP_{E44D18EB-91F5-4... was connected to the network, and has initiated normal operation over the network adapter.
The browser has forced an election on network \Device\NetBT_Tcpip_{E44D18EB-... because a master browser was stopped.
and at 1st comp also appeares this:
The system detected that network adapter Bluetooth...Area Network - Packet Scheduler Miniport was disconnected from the network, and the adapter's network configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.

================================================== =========================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 17 31 27 e6 10 ...... Intel(R) PRO/1000 PL Network Connection - Packet Scheduler Miniport
0x20004 ...00 60 52 0b 53 e3 ...... Realtek RTL8029(AS) PCI Ethernet Adapter - Packet Scheduler Miniport
================================================== =========================
================================================== =========================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 195.222.104.193 195.222.104.219 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.0.0 255.255.255.0 192.168.0.1 192.168.0.1 30
192.168.0.1 255.255.255.255 127.0.0.1 127.0.0.1 30
192.168.0.255 255.255.255.255 192.168.0.1 192.168.0.1 30
195.222.104.192 255.255.255.224 195.222.104.219 195.222.104.219 20
195.222.104.219 255.255.255.255 127.0.0.1 127.0.0.1 20
195.222.104.255 255.255.255.255 195.222.104.219 195.222.104.219 20
224.0.0.0 240.0.0.0 192.168.0.1 192.168.0.1 30
224.0.0.0 240.0.0.0 195.222.104.219 195.222.104.219 20
255.255.255.255 255.255.255.255 192.168.0.1 192.168.0.1 1
255.255.255.255 255.255.255.255 195.222.104.219 195.222.104.219 1
Default Gateway: 195.222.104.193
================================================== =========================
Persistent Routes:
None

Windows 7 Update Internet Connection Issue with Router

I updated two of four toshiba laptops with Windows 7 and installed Toshiba's wireless adapter driver for Windows 7. The adapter connects to the router and I can access all resources on my home network, however, Internet service is not available on the two laptops with the Windows 7 update. After disconnecting and reconnecting 7-10 times, the Internet Service connection does not drop. The other two laptops and two desktops that are not running Windows 7 do not have this problem. Is there any known issues with lynksys wireless routers and Windows 7?

When your Windows 7 machine is having problems, can it ping the following IP addresses:
127.0.0.1 (local loopback)
192.168.1.x - the DHCP IP address it was issued by the router
192.168.1.254 - your router
8.8.8.8 - Google DNS out on the internet
-- Dan Meyer
http://www.linkedin.com/in/danielrmeyer

10.7.1 update doesn't fix my internet sharing problem

I've updated my Macbook (late 2008) to 10.7.1 today. I'm disappointed to find that the internet sharing issue still exists. I can ping websites through it, but wget never work. Google.com is accessible while other sites don't load on my iPod touch and Palm Pre Plus. But it did work fine within seconds after internet sharing was started. And internet sharing on my iMac with 10.6.8 works perfectly.
I'm using PPPoE to connect to the internet. I guess there are some problems with MTU (maximum transmission unit).
Don't tell me to change wifi channel or set password, it doesn't help.

m4sheikh wrote:
Internet sharing worked on 10.7 after doing 1 tweak, that is by changing my Computer Name in internet sharing to something else other than the default one... however after upgrading to 10.7.1, the upgrade would mess up with the same tweaks again. It brought my Computer Name to its default, however when I clicked on edit it would give the changed name... I noticed that it has something to do with the IP Address but in any case I did the following and it works again for me on 10.7.1:
1) Go to System Preferences>Sharing and click on Internet Sharing (don't 'tick' it yet!)
2) After upgrading to 10.7.1, the Computer Name displayed on the Internet Sharing Screen would revert to the original, i.e. YourName's MacBook Pro. However, upon click edit next to the space where you can enter your Computer Name, it would give the name I had given while I was on 10.7.
3) Now you just have to make sure that both names are identical (do not use the default name YourName's MacBook Pro). Please see snapshot below (yes, my Computer Name is 'Network-Error', so don't be surprised:))!
4) Once you have confirmed that both names are identical, you are set to go and you may 'tick' the Internet Sharing option
5) An arrow facing upwards will appear instead of the wireless icon on the top tray and your device such as an iPhone should connect without any issues (an IP address will be given).
Note: the other options that I have kept in the Wi-Fi Options tab are as follows:
1) Network Name: should be identical to the one you have entered above
2) Channel: 11
3) Security: 40-bit WEP
4) Password: I've entered a five-digit password that contains numbers
To confirm that its working for me, I've added a screenshot from my iPhone below:
It doesn't work for me. Thanks anyway.

Internet sharing has stopped working after 10.8.2 upgrade

Hi. So, for the past year, I've been receiving WiFi internet on my iMac, and sharing it via ethernet and sometimes FW800. Lately, mostly just ethernet. As of 10.8.2, this has stopped functioning. I have heard many rumors about internet sharing issues in the update, but it seems I am in the extreme minority in terms of sharing internet via ethernet rather than sharing it via WiFi.
For the record, what I have tried so far is, enabling and disabling all options, trashing preferences, creating a second administrator account on the iMac and trying from that one, switching multiple ethernet cables just in case, and even switching to a different wireless network (we have two in my home on different wavelengths). It's always the same: devices recognize that they're connected to the ethernet port on the iMac. The iMac recognizes it's connected to them. They can obtain their own IP addresses through DHCP, but they cannot, under any circumstances, actually connect to the internet.
Please help! I'm tearing my hair out over here, as this was crucial to my setup. Updates shouldn't work this way.

As with other situations where a window is not visible, it is likely just off-screen where you can't see it. If your main "Final Cut Pro" window becomes inactive (close, minimize, and zoom buttons turn grey) when you attempt to open the "Background Tasks" window, this indicates that the window is definitely opened, it's just offscreen somewhere.
You can solve this problem by forcing FCPX to gather up all of its windows without having to delete your preferences:
1. Attempt to open the Background Tasks window in FCPX,
2. Switch to System Preferences->Displays and change your display resolution,
3. Switch back to FCPX and verify that you now have your missing window back,
4. Switch back to System Preferences and change your resolution back to its previous setting (likely the "Best for display" radio button).
Andrew
Talking Animals Channel - YouTube
youtube.com/talkinganimals

Unstable internet sharing

Ever since this last update internet sharing has been unstable on my phone. After a few minutes it seems to stop working and I have to turn off then back on the internet sharing to work.
Does anyone else have this issue?
Is this intentional by Verizon? If so, then it's time to look for another carrier.

hotdog777, I wasn't jacking you around, I replied and directed my comment to Verizon Wireless Customer Support. I know you are angry about what has happened to your phone, but your language seems like you are angry at me. My post was directed towards Verizon Wireless Customer Support for Furuta and your benefit, because I am not happy with the, for lack of a kinder word, the incompetence of Verizon Wireless Customer Support. They do not understand the Windows Phone platform so when they post in these forums they first act like they care, then they say something sympathetic, then they try to sound up beat like they are going to fix your problem, but it is a façade because they never provide any real help.
So to answer your question: because issues like this are very difficult to troubleshoot, and most likely you will never get to the bottom of it, I would unfortunately recommend the drastic measure of resetting or restoring your phone FAQ - How can I recover/reset/restore my phone software? - Microsoft - USA If the issue persist after wiping the phone, then check Microsoft: Nokia Lumia 928 - Troubleshooter - Microsoft - USA or contact Microsoft: Nokia Lumia 928 - Warranty and repair - Microsoft - USA .
I think I am coming to the conclusion that it is sort of useless to post in the Verizon Wireless Community Forums. Verizon Wireless Customer Support doesn't help on here. The best thing I have seen to do here seems like complain with other people who are in the same boat about firmware updates not being released, but even then Verizon Wireless doesn't listen to us on these forums. It is probably best if we all just started posting over in Windows Central Forums and Windows Phone - Microsoft Community. Also, those sites get a lot of media attention in the internet news aggregators.

Lumia 920, Black update, and Internet sharing not ...

I have a pair of Lumia 920s, both the developer edition given out at Microsoft Build 2012. Both updated to Lumia Black/gddr3 yesterday without any issues, both running on AT&T.
however, on one of them, the Internet Sharing no longer works, while on the other, it still works fine. I have swapped sim cards, and the problem stays with the one specific phone, and is not tied to the line.
I have reset and wiped the phone, and tried to reconfigure it (including reinstalling the spanish/mexico keyboard, which has solved this problem in the past).
I have checked access point configuration, and both match. Both are running on LTE. I'm at a loss how to get it working again, as I've been through everything that I know of to make it work.
Any thoughts?

I have the same problem only on mobile. Keeps asking to upgrade. Its like the phone doesn't know I have this service. Or the tmo,servers do not know that my account has paid for this. Funny part is,the customer services people say they can see I,have this feature on my acct. Pls jeep me,posted if you get a fix for this

Touble with Internet Sharing since latest Aiport Update

Up to yesterday I was able to share seamlessly my internet connection on my iMac using built in airport as a router. Since the last update, every time I open internet sharing is running on my iMac while connected to the internet, sharing my connection from ethernet using Airport within 30 second of my iPod been connected to my Wireless signal my internet connection die, and can no longer access the internet with my iMac or iPod. The only way to get back my internet connection is to disable internet sharing in system preference.
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x14E4, 0x87)
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (5.10.38.27)
Current Wireless Network: Airport
Wireless Channel: 11
Help

Just to be clear,
1. You are connecting fine on your iPhone (meaning that you have the 3 bars next to your Carrier in the top left of the screen)
2. you can't access the internet on you iPhone
Correct?

Internet sharing no longer works after Lion 10.7.4 update

Internet sharing no longer works after Lion 10.7.4 update. Hopefully Apple will fix this shortly. Little excuse for this kind of screw-up.

so here is da answer
1. go to finder>(computer name)>macintosh HD>library>preferences
2. copy the entire systemconfiguration folder and systemconfiguration.old folder to your desktop
3. restart mac and device which you share intenet to
then you have internet that is about 3x slower than the da 10.7.3 intenet sharing, but works
then, just wait for apple to release da 10.7.4 fixed
please use da steps!

Internet Sharing not working after updated to 10.9.2

I am using internet sharing from my broadband. But my ipad and other devices unable to join the network after updating to 10.9.2 just now.

the same one is here after update from 10.6.8 where i've ancountered no probs with wi-fi whatsoever! and also lack of flv / avo quick previev is irritating!

HT6114 10.9.2 update internet sharing issue

Similar Messages

Maybe you are looking for