HT6114 10.9.2 upgrade "breaks" the camera
After upgrading to 10.9.2, FaceTime, PhotoBooth, and Skype no longer can find the built in iSight camera on my iMac. They all ask me to install a camera.
Hei [email protected]
PROBLEM =========
After upgrading to maverick 10.9.2 my camera stopped working on my iMac and on my MacBookPro.
First I suspected that it was the maverick upgrade, which was the problem.
After spending several days with searching on the internet and trying all the different suggestions.
Which included re-format hard disk, re-install Maverick again, safe boot, removing old *.kext files, repair disk, check disk with permissions etc. etc. (waste of time)
I phoned apple support, but supporter said that it was a non apple App which caused the problem.
Then I say somebody saying that the AirDisplay was the problem.
SOLUTION
==========
I finally found out that:
By uninstalling the AirDisplay solved the problem, and now the camera works again.
Here is the link how to uninstall AirDisplay:
http://www.avatron.com/support/faq-air-display/#toggle-id-24
PLEASE Avatron
==============
When do Avatron have a fix for this particular problem. No update was available today when I tried.
Are Avatron working on the problem?
A lot of people have this problem with AirDisplay and Maverick Update 10.9.2 !!!!!
search google
maverick 10.9.2 facetime camera air display not working
Regards
Finn Rosenkilde Rasmussen / (+45) 48 24 60 30
http://www.linkedin.com/in/hvepseeksperten
HvepseEksperten.dk ApS
Kongens Vænge 79
3400 Hillerød
Denmark
Similar Messages
-
Ipad mini users only. Did the ios 7 upgrade diminish the camera and picture quality?
I recently upgraded my ipad mini from ios 6 to ios 7 and I still trying to get used to the new interface. However my confidence was shaken when i stumbled upon several internet posts claiming a diminishing in the quality of the pictures taken with the ipad mini especially in outside conditions. My plans to get buy an ipad with ios 6 on it were about to get scrapped but the post and complains i read online are making me reconsider them again. I would appreciate if a fellow ipad mini user share his or her upgrading experience with me so i can make an intelligent decision. Please i would truly appreciate non partial, thoughtful opinions, not fan boy/girl type of advice. Thanks
I haven't noticed any deterioration on ipad mini's at all. In fact i think it's almost seems better on ios 7 due to software enhancements.
In all fairness though, why are you using an ipad mini for taking photos.
Its not bad camera it's just there are much better out there. -
I just got an iPhone 4 as an upgrade from the original iPhone 3. I came home and tried to sync it with my iTunes and it says I need to upgrade my iTunes to work with the 4. The current version of iTunes isn't compatible with my G5 mac????? Help
Return it.
The requirements are on the box and on the website:
Mac system requirements
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.1 or later (free download fromwww.itunes.com/download)
iTunes Store account
Internet access
http://www.apple.com/iphone/specs.html -
HT4528 after upgrading to IOS 7.1 the camera on my 5s no longer works
after upgrading to IOS 7.1 the camera on my 5s no longer works. Prior to the upgrade, I had no issues with the camera
Hi JoieC,
If you are having issues with the camera on your iPhone after a recent update, you may find the Camera troubleshooting portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden -
I thought I would be able to scan bar codes with my iPad 2 but cannot because it only has a fixed-lens camera. Bar code scanning apps require auto-focus cameras. Can I upgrade the camera within the iPad2 to auto-focus? If not, can I add a peripheral auto-focus camera and plug it in the the usb port?
Your not able to upgrade the camera, it's not really there for photos . Also there is no USB port on the iPad just a cable that connects to you computer.
-
I just upgraded my camera - and the Camera Raw support in PSE 11 is not able to support it. Can I upgrade the Camera Raw plugin, or is Adobe going to force me to buy an upgrade to PSE 12 or another of their products?
You'd better complain to Nikon... Just like other camera manufacturers who issue new raw formats for each and every new camera. Adobe and all other software companies have to reverse engineer each new format. Those manufacturers could use the open and public DNG format (a few do).
Adobe answer to that problem is to provide a free software, the DNGconverter which can batch convert a folder of raw files to the universal DNG raw format which your old Elements version can read.
http://forums.adobe.com/thread/1030798?tstart=0 -
FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ?
Any solution * Advance ThanksFCP X will import into separate clips every time it detects a scene change (as when you stopped and started recording in the camera). There is no option to avoid this, as far as I known.
You may try importing from camera using Quicktime Player X and then bringing the imported file into FCP X. -
hello guys i face a problem when i upgrade from iOS 4.2.1 to iOS 5.1.1 on ipad 3 .when i upgrade i don' t found the camera app from the built in apps.when i try to install from the app store i don't found the correct camera app .please help me .please give any suitable link where i find the correct camera app
It's a built-in app, so it can't be deleted nor downloaded from the store. If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > Camera being set 'off' ?
If not then have you tried a reset to see if you can find it after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I have a MacBook Pro running 10.7.2. I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade. iPhoto does not see the camera nor does Image Capture. IC says there is not a camera connected. Cable is known good. Has something changed? Thanks!
If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
Try reformat the card, change the ports and/or use a USB Card Reader. -
Hello, I IPAD3 to upgrade 6.0 system, rear camera can not open up, open the camera stuck in the rotating screen
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank. Be patient, the device will power ON again in the normal way. It is app and data safe!]
-
I have upgraded my iPhone 4S to iOS 5.1 and now cannot access the camera from a locked screen. Anyone have any suggestions?
From the lock screen, to access the camera you touch the camera icon and slide in an upward motion. It no longer takes a tap to get it to open.
-
After upgrading the iPhone 4 to iOS5, the camera icon doesn't appear on the lock screen. How do I get that? I've already tried restoring...
My photostream doesn't sync to my Mac Air either...And to continue the help:
The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook. -
I have an iPhone 4. I upgraded to ios5. I don't have the camera icon on the lock screen next to the unlock slide. Why not?
Probably because you haven't double-clicked the home button.
-
After Upgrade to lollipop, the camera stopped working
Hi, I have upgraded from two days my Z3 Dual software to lollipop 5.0.2 After completion, the camera stopped working. I have applied repare through PC companion and it is still shows the following error: Error
Camera not available. I have restarted in safe mode but the same problem. I tried many option like factory reset but no use. Can any one help in this matter? Regards
BakrTry Clearings the camera app data.
How to clear data on apps.
From your Home screen
1. Tap the Application screen icon.
2. Find and tap Settings > Apps.
3. Swipe to the All tab.
4. Find and tap on the camera app.
5. Tap Force stop > Clear data.
6. Restart the phone -
I want to show pictures from my iphone 4 on my television. I have the cables but it will only show a few pics stored online, none of those on the camera roll. Would it make a difference if I upgraded the ios to ios 7?
1, iOS only works on iPhone, iPads or iPods. These drives were probably made with an operating system that preceeded OS X such as OS 7, OS 8 or OS9.
2, No, the data on the Zip Drives is formatted for the Mac.
3, If your reformat them then all of the data is wiped
4, The problem would be that the PC can not read the files as formatted on the zip drive by the Mac
5, There are services that might be able to migrate the data for you but I seriously doubt that Staples or Office Max can do it for you. The services that migrate data charge big bucks so be prepared to pay for it.
Allan
Maybe you are looking for
-
How do I delete a row in Microsoft Access from a vi using the database toolkit
Using the database toolkit 1.01 how can I delete a row from my vi
-
Ever since updating to OSX Mountain Lion, I can't access my FCPX files
When I went into FCPX after updating to OSX Mountain Lion, I was told I needed to update my FCP files or they wouldn't play. I clicked update and left it running all night (I have a lot of large files). The next day, after rebooting, I tried to acces
-
Hi nokia my phone in a same condition no store, no sotial net plz help me. After hard resetting by three buttons (home,volume,camera) everything gone like ovi store, social, After hard reset went to s/w update and download the Ovi Store which was not
-
Printing in 2.0 with epson r380
I have an epson r380 that I am trying to get to print accurately in 2.0. I am having the same problem I had in 1.5. Colors are not rendered (purple tinge to all photos). Screen color is accurate. When printing in CS3 photoshop there isn't a problem.
-
First Row with $s n below w/o $s
For a hierarchy is it poss to show the amounts with $ sign in the first row & without the $ signs below ?? Something like say for a country Hierarchy : <b>-Month-- Year to date</b> 2007|2006|INC ( Diff ) |%________________2007|2006|INC ( Diff ) |% US