HT6114 After OS X Mavericks v10.9.2 Update I cannot use my Apple TV anymore.

After OS X Mavericks v10.9.2 Update I cannot use my Apple TV anymore. There is a black screen. I cannot switch to the mirror option. I can use the apple tv from my iPad - so APTV  is working. I have restart the computer and the apple TV.

These commands from the Terminal worked for me -
1. Open Terminal in /Applications/Utilities.
2. Run these commands respectively:
sudo rm -rf /System/Library/Extensions/APExtFramebuffer.kext
sudo rm -rf /System/Library/Extensions/AirParrotDriver.kext
sudo rm -rf /Library/Extensions/APExtFramebuffer.kext
sudo rm -rf /Library/Extensions/AirParrotDriver.kext
I found it on Intenret. I had AirParrot Intalled before.

Similar Messages

  • Did OS X Mavericks v10.9.4 update break bluetooth audio for anyone else?

    Did OS X Mavericks v10.9.4 update break bluetooth audio for anyone else?
    I have a 2.4GHz Intel Core 2 duo MacMini from 2010, and I just updated to the latest OSX (10.9.4 (13E28)) and now bluetooth audio is broken. 
    I can pair my device (LG Tone+) to the mac, but no audio will play though it.  I've rebooted the machine, reconnected the device after the update, restarted the browser, all with no results.
    Typically, when I connect to the system I will get audio acknowledgements through the headset, "Power On" "Battery High" "Connected"
    I still get those audio queues through the device.  However when I open up a video on YouTube, or attempt to stream music on Spotify...nothing happens.
    I've plugged wired headphones into the system and that works just fine.  When I connect my Bluetooth headset, the audio to the wired headphones disconnects, so it seems like everything is behaving normally, except that no audio plays through the bluetooth headset.
    Any ideas on where to go from here would be greatly appreciated.  So, what do we think?

    Try resetting the SMC.
    Barry

  • Is OS X Mavericks v10.9.5 Update fixed?

    Has the OS X Mavericks v10.9.5 Update been fixed yet or should I continue to wait for upgrade? Where will Apple announce when the upgrade is fixed and ready to install without all the problems I am hearing about?

    There is nothing new for 10.9.5. It did not require fixing. With Yosemite only weeks away from release there will likely be no more updates for Mavericks.
    If you have some sort of problem, then if you tell us what it is perhaps it can be fixed. You do not want to update your system unless it is pristine and free from any issues. But if you don't wish to update to 10.9.5, then you can wait to upgrade to Yosemite. It won't fix any problems that you think you now have.

  • About the OS X Mavericks v10.9.5 Update i am trying to update this since yesterday but its saying there is an error in server "Can't connect to the Apple Software Update server.(-1003)" please help

    About the OS X Mavericks v10.9.5 Update i am trying to update this since yesterday but its saying there is an error in server "Can't connect to the Apple Software Update server.(-1003)" please advise with instructions how to update it...
    why i am not allowed

    Try running the combo update.
    10.9.5 Combo Update

  • OS X Mavericks v10.9.4 Update still does not fix the wifi shut off in sleep mode problem

    OS X Mavericks v10.9.4 Update was supposed to fix the wifi connectivity problem with my iMac. Wifi disconnects in sleep mode and does not connect when awakened.  Must reconnect manually every time. PITA.

    Your observation is correct about wifi disconnection in sleep mode. That is normal, you may want to check to see if your Mac supports Power Nap/is enabled- OS X: About Power Nap
    The reconnect should be automatic within a few seconds.
    Does it happen with multiple wifi networks or just one?
    Have you tried deleting and re-adding the wifi network?

  • OS X Mavericks v10.9.3 update monitor philips

    The OS X Mavericks v10.9.3-update created a problem. The Philips Displayport Monitor 272C4Q doesn't show any image anymore. What left is a black screen. My iMac and MacBook Pro has the same problem. The computer sees the monitor, act like normal, but there is no image.
    I haven't updated my MacBook Air: this one is still working properly. Help ...

    Hi PierkePitt,
    Sorry to see this, strange question, as the monitor still works on a Mac which hasn't updated to 10.9.3 there could be a problem with that particular OS update and the driver used for the monitor. You mention that it shows up under Displays in System Preferences, are you able to Click on the Arrange tab and click the Gather all windows button to bring over the display settings for the Phillips Monitor and see if it recognises the model and type of monitor?
    I'd also try changing the resolution on that display temporarily to Scaled and see if a lower resolution does anything?

  • After the iOS6 update I cannot use messages on my iPad

    After the iOS6 update I cannot use messages on my iPad2 anymore. To not any person on my contact list. The message will not send.

    On your phone. Go to itunes, find the tone and it should have a little download sign next to it, not a money amount sign. Just re-download it. On your iTunes on your computer, check to make sure you have the "Sync tones" box checked.

  • After installing Acrobat X pro as a trial, I cannot use the software and Im required to enter the serial number to continue

    After installing Acrobat X pro as a trial, I cannot use the software and Im required to enter the serial number to continue
    Under Continue to use as a trial it shows 0 days remaining.

    Trial mode expires prematurely
    http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html

  • When updating OS X Mavericks v10.9.5 Update it downloads twice why?

    After updating why does OS X Mavericks v10.9.5 Software Update Records show that it has installed itself and all other updates twice? Is this a error in the new update?

    Double-entry usually occurs if you paused the DL and installation. That's all I have. For more info, contact http://www.apple.com/support/mac/app-store/contact/ which runs this service.

  • HT6065 OS X Mavericks v10.9.1 Update - Issues

    Hi All
    Since I have updated to Mavericks v10.9.1, on my Macbook Pro with retina, it has been acting up hectically. Everything would just freeze, and then the spinning beach ball of doom would appear and it would be spinning for about 10-20min. If nothing happens I have to restart my machine, and then everything would be back to normal, but after awhile the same issues would happen again. Please help.
    Regards,
    Gary454

    Hi John,
    So I have used Activity Monitor, and I have noticed there was a lot Google Chrome Notify helper activity. I am not sure if this has caused my MacbookPro Retina to freeze. But i have stopped using Google Chrome and started using Safari. Since I have started using Safari, my mac doesn't freeze any more. I hope this has fixed the problem.
    I have read a tons of other discussion, regarding the mac's freezing after the 10.9.1 update and I see a lot of people have the same problem.
    I have repaired my drive and fixed all my permissions via disk utility in safe mode. This should appreantly fix the problem. And then I tried to reinstall the offline update, but this gave me alert stating that the software is not supported on my system. Screen shot below:
    I will have not had any problems after doing the above, but I will let you know if anything else come's up.
    Thanks your time, much appreciate.
    Gary

  • After I used the migration tool to transfer contents of my previous MacBook Pro I cannot log in to my new MacBook Pro. I have tried using old and new passwords but to no effect. I cannot use my Apple ID. How can I re-set my MBook to factory setting pls?

    I have been a proud owner of Apple products for many years. However, this problem is very frustrating! Any help will be appreciated. I used the migration tool to transfer the contents of my old MacBook Pro to my new shiny MacBook Pro Retina! After migration finished I tried to access my new MacBook Pro retina. However, when asking me to log in it refuses to accept the passwords from either the new MacBook or the old one! I do not have the option of using my Apple ID either.... Please help! Unfortunately, I am past my 90 day Apple Support!!

    Restart holding down the CMD+R keys, launch Disk Utility and erase the HD, quit DU, and restore the OS. On first boot, use the Setup Assistant to do the migration. Details in Pondini's Setup New Mac guide.

  • HT6114 OS X Mavericks v10.9.2 Update will not install after restart

    My iMac continues to say I need to restart in order to install 10.9.2 but after restart it freezes up on the restart and then I have to shut down with power button. It always restarts after power shut down but then continues to say it needs to be restarted in order for install. This as been going on for weeks. I contacted Apple support - they want me to pay $ 19.99 so they can tell me how to fix their update! This is the first dissatisfied call to Apple I have had, hope it's not a trend!

    I suggest you backup your data to an external drive as a clone. If your drive has issues you want to be sure your data is safely backed up.
    Both of these applications are free to clone. You will need to purchase an external drive.
    SuperDuper! http://www.shirt-pocket.com/
    CCC http://www.bombich.com/download.html
    If the Safe boot fails to help, I would boot into the Recovery Drive and run Repair Drive using Disk Utility. You cannot repair your drive while you are booted from the drive.
    If this still fails, boot back into the Recovery Drive and re-install Mavericks.
    Boot into Recovery Drive.
    Hold down Command R key when restarting.
    http://support.apple.com/kb/HT4718

  • HT6114 OS X Mavericks v10.9.2 Update - How do you block incoming iMessages from individual senders?

    Just trying to figured out how to block individual senders on iMessage (blocking feature added to 10.9.2). I thought that an option would exist in the application by going to the "Buddies" menu but alas, the option is greyed out on both my systems after the 10.9.2 update.
    The help file associated says to
    Select a conversation in the sidebar, or a buddy in your buddy list, then choose Buddies > Block.

    A quick summary.
    In Messages menu > Preferences > Accounts > iMessages account which now has a Blocked tab.
    The Messages > Buddies Menu > Block only applies to AIM Accounts
    You can also block them by name in Messages > Preferences > Accounts > AIM accounts Privacy tab > Block Specific People List button (Block by Screen Name)
    Jabber Buddies are effectively "blocked" if they are not Authorised (to be a Buddy).
    See also the Buddies Menu.
    Many of the Menu items refer to iChat Actions which is the backbone of the app.
    8:59 pm      Thursday; February 27, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Login fails for a user after OS X Mavericks 10.9.4 update

    I just updated my Mac Book Pro last night with the latest OS X Mavericks 10.9.4. The Mac Book Pro is not letting one of the users to login. I have two users on the Mac Book Pro and the second user is able to login without any problems.
    The password is correct and after entering it the screen flickers as if it is going to login and then returns back to the login challenge.
    Anyone else experience this problem or know a solution?

    I solved my own problem by deleting /var/folders

  • HT6065 Cannot connect to home wifi automatically despite upgrading to OS X Mavericks v10.9.1 Update

    My MacBook Pro is unable to connect to my home wifi although there were no problems in the past.  I realized that the problem was intermittent and then it became permanent.  Each time I have to manually connect to my home wifi.  This is despite having upgraded to the latest OS version Maverick v 0.9.1.

    See if anything here helps - no guarantees, but sometimes any one of the suggestions has been known to work:
    WiFi Problems:
    Wifi problems seem to crop up a lot on here and unfortunately there doesn't seem to be a 'one fix' solution.
    However, sometimes any one of the following can help although, unfortunately, not always. In no particular order:
    Check wifi security - if it's WEP change it to WPA or WPA2 (preferably, as it's more secure)
    Change the wifi channel on the router
    Create a new Network Location: http://support.apple.com/kb/HT5289
    Reboot the router
    Also take a look at this link and the links within the article for other ideas. They mainly reference Lion, but still seem to be relevant to Mountain Lion and possibly Mavericks:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conte n t=FaceBook
    ...and this link:
    http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/
    Getting WiFi to automatically join the correct network:
    System Preferences>Network>WiFi>Advanced Button
    Delete all networks you don’t want to join
    Tick the box ‘Remember networks this computer has joined’
    Tick the box ‘Change networks’ under ‘Require administrator authorisation to…’
    OK the changes
    Tick the box ‘Ask to join new networks’
    Apply the changes

Maybe you are looking for

  • Need help getting music purchased with one apple id to my new phone that has a new apple id

    I used to have an ipod nano under one apple id.  I stopped using the nano and let my daughter use that apple id when she purchased an ipod touch.  I recently got an iphone and would like my music library on my phone.  I created a new apple id for my

  • Vendor / Customer as Main Ledger

    Hi Frnds, Can the Vendor and Customer be maintained as Main Ledgers. When they can be maintained so, why the sub ledger concept is introduced & what are its advantages. Help me on this. Regards, Venkata.

  • Weblogic.servlet.security.ServletAuthentication.logout() doesnot work

    Hi,           In WLS6.1, i have a webapplication.           User logs into this by Form based authentication. When user clicks logoff, I tried calling ServletAuthentication.logout()/ invalidateall()/ killcookie() along with calling session.invalidate

  • Auto import problem

    Hi all, I am a professional photographer and have recently upgraded my digital workflow so that I can offer tethered shooting from my Nikon D700 to my macbook pro laptop. I recently purchased and loaded LR2 (version 2.4) so I am very new to it. I did

  • Last Use Date for iViews/Pages/Workset - Portal clean up of old items

    Is there any scripts that SAP has created that shows the Portal Admin which iViews have been recently used by the users and which ones have not. We would like to go through our environments and Clean Up/Remove old none used code in the PCD. I am hopi