HT6114 computer gives restart message with error report, follows update 10.9.2

following update to 10.9.2 get restart message with error report

Hi g4towerman,
Thanks for visiting Apple Support Communities.
You may find the information in this article helpful with diagnosing and resolving the error you are seeing:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
http://support.apple.com/kb/TS4636
Best Regards,
Jeremy

Similar Messages

I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

summarizing:
iPod nano (what version iOS BEFORE update?)
downloaded music
updated iPod to iOS 8.1.2
Windows 7 PC
plug-in iPod to PC
error message from iTunes on the PC "Ipod detected but can't be identified properly" ⬅[quoted from your original post] (+ suggested troubleshooting steps)
un-plug > re-plug iPod (how many times?)
iTunes un-installed from PC (?)
iTunes RE-installed to PC (?)
error message repeats(?)
searched "Ipod detected but can't be identified properly" site:support.apple.com with ZERO results - pretty strange that the support site wouldn;t know an iTunes generated error message (?) EDIT - had an "aha! moment when using a fresh Google search page and 'suggested' CANNOT
then "Ipod detected but can't be identified properly" site:discussions.apple.com had ONE result = Can't connect to iTunes with ipod touch (-50 error) - NO REPLIES
CANNOT instead of can't [ tsk tsk ]
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
follow all the instructions in order and let us know

Cancel message with errors - How to automate this?

XI / PI SDN Community
I think that because of basis team settings every time a message fails to pass through the pipeline (for example a mapping error) XI tries to process this message over and over again for days!
Assuming that basis is not going to change any configuration on their end: Is therer a way to create a job (TCODE sm36) to do this cancel for me? - I mean I have access to go and manually cancel the message with errors tru the moni.
Regards,
José Francisco

Dear Jose,
Hi this is Tarang ...
For cancelling messages on Java engine ( ones that you see on RWB )
1. There is no standard program which would allow you to cancel the messages here
2. you can only set a maxim retry interval...i.e how many times a meesage in error should be retried foe sending...this setting can be done in transaction sxmb_adm....there is a parameter called IS_RETRY for this..
For cancelling the messages on ABAP engine ( ones that you see in MONI)
1. You can cancel them using the report rsxmb_cancel_messages ...but dont use this report independently...
coz there are some chances ..due to which you are getting a message in error in moni ..but the message is restartable......then if you directly cancel it , it is not correct
2. you cna club the above report with rsxmb_restart_messages...i.e you can create a job sequence where 1 step would be scheduling thee program rsxmb_restart_messages and then the ones that are not restarted properly ...yu can cancle using the second step in the sequence ....i.e rsxmb_cancel_messages
But be it ABAP / JAVA engine every XI landscape has many of the EOIO interfaces where in the concept is that if the first message in the queue gets stuck ...the message behind that should also get stuck....if you cancel message automatically (say using the above report), there are chances that particular message was configured for EOIO and the message behind that is actuaaly not meant to move ahead..but once you cancel the first message3 the other will go.....which is wrong and against the laws of EOIO...
hence SAP suggests " no automatic cancellation of message neither at ABAP nor at JAVA level should be done"
SAP says that manual cancellation of messages is included in the daily maintenance task of XI
you can obviously play with the number of retries using entry IS_retry
Hope this helps
Edited by: Tarang Shah on Mar 6, 2009 11:07 AM

Monitoring SAPconnect message with error into RZ20

Hello,
I would like to send an alert by e-mail every time a message aimed at being sent outside SAP (through SAPconnect layer) fails.
I have customized using standard help and OSS notes 546493 and 683974.
Into RZ20, I have customized the INT node with the following data:
maximum of alerts kept = 1
the newest alerts are kept
set "value obsolete" after 0 seconds
Performance attributes
last reported value
threshold values : 0 for the 4 fields
alert is triggered if the comparative value exceeds the treshold value
Methods attributes
start the data collection every 300 seconds
data collection method = SAPconnect
auto-reaction method = ZCCMS_Send_Alert_to_ALM_V2 (duplicated from CCMS_Send_Alert_to_ALM_V2)
With this customizing, I expected to trigger an alert at every message with error.
Unfortunately, it triggers the alerts only at the first message in error.
I have to complete the alert manually to expect an alert trigged for the following message with error.
Is there a way to complete the alert automatically (as soon as it is triggered) ?
Or how can I do to achieve what I would like to do ?
Thank you very much for your help.
Regards,
Fabrice

Hello Alexander,
yes, I have tried to set the "value obsolete" to 1 seconde.
Indeed, the value becomes obsolete but the alert is not completed.
Then, for the following error, I get a new value but no new alert is triggered.
Thank you.
Regards,
Fabrice

Messages with errors canceled

What is the meaning of this below message status in SXMB_MONI ?? What is the cause of this status ?? What is the meaning of message can be deleted with the next delete job ??
Messages with errors canceled
Processing of a message with errors was canceled. The message can therefore be deleted with the next delete job.
Thanks
Kumar

This status signifies the following:
1. The message has errors and was canceled manually.
2. The status is final, i.e., it cannot be restarted now.
3. The message can be deleted.
Regards,
Prateek

Session completed successfully with errors reported in error tables.

Which table would contain the errors for this error message?
"Session completed successfully with errors reported in error tables."
The Snp_Exp_Txt table?
Edited by: user8702914 on Mar 2, 2011 11:28 AM

Sutirtha,
The FLOW_CONTROL option must be set to 'Yes', as it is the CKM that creates and populates the E$ table. If it was set to 'No' there would not be any 'errors reported in error table' as the error table would not exist.
Cheers
Bos

HT5639 After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do? i have using bootcamp 5

After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do? i have using bootcamp 5

if it's restarting directly into an error, you can try troubleshooting (might be painful) or re-install windows with boot camp

When authorize my computer, gives me message "please review your account information"

when authorize my computer, gives me message "please review your account information"

And have you reviewed your account information?

HT1222 i can not open my i pad-1 and the device gave me message connect to iTunes and when connect the computer give me message type the password firstly i do not know what can i do ?

i can not open my i pad-1 and the device gave me message connect to iTunes and when connect the computer give me message type the password firstly i do not know what can i do ?

Is it disabled due to too many incorrect passcode attempts ? If it is then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it.

COMPUTER DISPLAYING BDOS SCREEN WITH ERROR IN DRIVER NETIO.SYS (DRIVER NOT LESS OR EQUAL)

Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 11-11-2014 21:28:32
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: hp
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-11-11T15:58:32.143554400Z" />
<EventRecordID>23255</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>hp</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">0</Data>
<Data Name="PowerButtonTimestamp">0</Data>
<Data Name="BootAppStatus">0</Data>
</EventData>
</Event>

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
-- %systemroot% is the environment variable for your Windows directory. For example, C:\Windows.
2. Copy any and all .DMP files in the Minidump folder to your Desktop, create a new folder on the Desktop to put these .DMP files in, and then zip the folder. You can then either use a 3rd party tool such as 7-Zip/Winrar, or you can use Windows'
default method of zipping folders.
Compress and uncompress files (zip files).
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, and your Minidump folder is empty, you will need
to allow the system to crash once again to generate a crash dump.
3. Upload the .ZIP containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply.
Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel Memory Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel Memory Dumps in the simplest definition is a Kernel Memory Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel Memory Dump is
the best choice. Do note that Kernel Memory Dumps are much larger
in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for
all drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the
system log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

"This Computer Requires Restart" Message

Lately my G4 12" has started giving me a message "you need to restart this computer". The only way to restart is to hold the power button down till shutoff. Everything else is unusable. When I restart using the power button the G4 starts back up and I get the message that the computer shut down unexpectedly and do I wish to ignore, or report the problem? Sometimes I get the restart message as I am restarting. It is very random and happens on battery, or plugged in. I can sometimes go a whole session and not see it, or it happens two or three times in a session.
Any ideas?? (I am a new mac user, former PC so I try to make everything as difficult as possible...)
Rick

Rick, welcome to Apple Discussions & the Mac community.
You are getting what's known as a kernel panic. Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. When trying to troubleshoot problems, disconnect all external devices Do you experience the same problems?
You said you maxed out the RAM. Was this done recently & did the KPs start soon thereafter. OS X is "picky" about RAM quality. I suspect your added RAM may be the culprit. Look at this link: *Testing RAM* @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Also look at these links.
Mac OS X Kernel Panic FAQ
Mac OS X Kernel Panic FAQ
Resolving Kernel Panics
Avoiding and eliminating Kernel panics
12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

Message with error in SMQ2

Hi,
Does anyone know why some messages with message mapping failures shows up in SMQ2 and some messages with message mapping failures won't show up in SMQ2?
Thanks,
Jay

Hi Jung,
If there is a mapping problem then you should be able to see the error messages in SXMB_MONI.
SMQ2 will show errors in case there are problems with inbound queue.
The various problems can be queue getting stuck, queues not registered, etc.. incase of mapping error you cannot see error in inbound queue (SMQ2).
Regards,
Gautam Purohit

SQLDeveloper tool script execution aborts with Error report: No more data to read from socket

Hello,
Strange behaviour of the SQLdeveloper tool while executing script with typical DDLs like:
Create Table,
Alter Table
Create Trigger ( use of :new and : old attributes in tehe body of trigger ).
Insert Into....
Scripts works ok from time to time.
But sometimes coincidentally aborts with the error :
Error report:
No more data to read from socket
Do not understand where is the problem.
Scripts works ok when executed in SQL*Plus on server ( where Oracle RDBMS resides ).
The version of SQLDeveloper is
Version 3.2.20.09 Build MAIN-09.87
The version of RDBMS is 11.2.0.2.0 .
Thanx for any reference or direction or hint for upgrade or experience.
Greetings,

Welcome to the forum!
Please provide the 4 digit Oracle version (result of SELECT * FROM V$VERSION) for the source and target servers; 10g and 11g are not versions. You also mention sql developer so what is the exact version you are using?
>
If delete the "OF out_a.ALLOCATION_ID" of the for update clause of CURSOR exist_allocation, this prolbem will not happen, and the code is comple succesfully on sql developer for oracle 10g.
>
Please clarify what works and what doesn't work because your statements are both incorrect and misleading.
You can't delete the "OF out_a.ALLOCATION_ID" of the for update clause or you would get a syntax error by leaving FOR UPDATE OF with nothing specified after it.
Also you original statement said
>
But when compile a package which is fine on oracle 10g
>
But now you say that if you delete the "OF..." the problem doesn't happen and the code compiles on 10g.
Does the original code compile on 10g or not? Does it compile on 11g or not? After the original code is migrated to 11g does it compile? That is, the code is there can you manually compile it?

Sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT

Good Evening,
we want to build an alert-report, which is fed by the table sxmspmast. in fact we want to do an alert, when messages are being logged which have the little red ball (ICON_LED_RED) in TA sxmb_moni. I tried to focus on the field msgstate without success - in fact messages with same msgstate value 003 have different icons! I also tried to find "red" messages with their IDs in table sxmsperror, but it wasn't there, although the table was not empty.
any ideas appreciated.
thx. a lot,
matthias

Hi Matthias,
The table SXMXPMAST is the master table for the messages(in each pipeline ..one entry i think..), you might want to look at another table - SXMXPVERS.
This has the version of the messages in different pipelines & at different stages. There the statuses are different and not '003'.
For example a message coming in would have at 3/4 entries in SXMPSVERS, because it hase to go through "Recorded", "Recorded for Outbound Processing", "Processed Successfully" status and each status will have an entry here and the statuses would be different.
So this can be your source table instead of the SXMXPMAST..
hope this helps.....
btw...my naticve place is called KERALA in INDIA which means the "LAND of COCONUT TREES" ...
Thanks,
Renjith.

Resend cancelled messages with errors

Hi! I cancelled some messages then i need to resend them. however it show an error: "Unable to schedule n of n messages for processing; update the status". what are the steps to resend them back?
Thanks!

Hi Ronald - If the messages are cancelled, you should get them republished from source..
have a look at the below thread -
How to resend Message from RWB With status "Canceled with Errors"
If you can download the payload, may be you send it from RWB..
modified...

HT6114 computer gives restart message with error report, follows update 10.9.2

Similar Messages

Maybe you are looking for