HT6114 external display cutting out

since the new update every few minutes my external display keeps cutting out and have to unplug and re plug the hdmi cable back in

Hey there jamie0105,
It sounds like your external monitor is not funcitoning correctly with the computer after updating to Mavericks even after reseating your HDMI cable. I recommend these troubleshooting steps from the article named:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Similar Messages

13" 2012 Non-Retina display cuts out

Like the title says, I'm having an issue with my 2012 non-retina 13" display cutting out when the bottom cover is installed. Without the bottom cover, the computer is perfectly fine and the display is normal. However, once I put the bottom cover on and begin tightening the screws or put any pressure (metal to board contact?) the display cuts out, displays lines or begins or distorts.
What is the issue causing this? I'm pulling my hair out at this moment

If I were you, I would take the machine into your local Apple Store and compare it with similar models on display. My late 2011 15" has a bright, vibrant screen and so should your new 13".
If you see that your display is simply not up to par, exchange your computer for another - you have 14 days from date of purchase to exchange or return for a full refund.
Good luck,
Clinton

ITunes Visualizer on External Display Blacks Out Main Display

Is it possible to have the iTunes Visualizer full screen on an external display while keeping the main display active?
In other words, I'd like to have my 2nd monitor display the iTunes Visualizer in full screen while I do work on my main screen. Every time I try this it forces the main screen to go black.
Does anyone have a solution, or is this just the limitations of iTunes and/or the Mac?
(By the way, the closest I've come is to put the iTunes window on the 2nd display, start the visualizer, and make its window as large as it will go. But, you still see the top of the iTunes chrome above and below the visualizer.)

I realise this is an old post, but have not yet seen an explanation of how I have solved this problem.
Its not a complete solution as it only works if you want to use iTunes, and does require an iPad or an iPhone.
First configure the Apple remote App on your iPhone, or iPad, or both iPad is best, but iPhone works almost as well.
Check that you can control the music from your i'Device'
Drag the iTunes window onto the external screen/projector. I am assuming external monitor with a different screen geometry to main screen, but if you can handle some gaps, you can mirror displays just as well.
Turn on the Visualiser - and put it into full screen.
If you can't see the external screen the following short cuts are useful.
⌘T - turn on Visualizer
^⌘F - turn on Full Screen
Your main screen will blank out, but you will still have full control of your music from the Remote App.
Very cool if you are having a party, and want the visualiser on the large LCD TV, or on a projector.
Steve

External Display Blacks Out

I have MacBook Pro 13" (early 2011) hooked up to an external display. With Snow Leopard this setu worked fine. But after upgrading to Lion the external screen constantly blacks out. I've seen some suggestions saying that it might be the adapter but, as I said, this setup worked fine in Snow Leopard so I find it unlikely to be an adapter issue.
Does anyone have any suggestions on how to fix this problem? It's extremely annoying.

This has been fixed in one of the latest OS updates.

Disconnect+reconnect external display = washed out image

hi guys
I need some expert help on this. Using a Dell E178 WFP external display on my 2010 Macbook Pro via mini-DVI-to-VGA adapter. This display has no EDID it seems so I use SwitchResX to create the necessary resolution override (1440x900). SwitchResX has nothing such as daemons or helpers installed on top, so this boils down to graphics drivers.
My problem: When I reboot the machine, the display has the necessary brightness, contrast, and colour balance. If I unplug the display, wait a sec, then plug it back in, the image comes up very bright and washed out, and I can't get a "true" black out of the display.
What this isn't: I have a ColorSync profile, and make sure it is successfullly loaded, i.e. I go through the trouble of opening up system preferences>displays>color to make sure it reloads. This is not a ColorSync problem. It is not the 2.2 vs 1.8 gamma problem either. Ctrl+shift+eject does not fix it. Creating a new colour profile does not fix it either. The usual SMC, permissions, safe boot, etc tricks don't work either.
Apple engineers have sent me a copy of TimingSnoop but were baffled by the display having a "fake" EDID (when run without SwitchResX TS detects no EDID at all). Since I refused to roll back my entire system to 10.6.4 or uninstall SwitchResX (it does not interfere??) they closed the bug stating "insufficient information".
10.6.4 did not have this problem, and my hardware is perfectly fine.
Rolling back the graphics to 10.6.4 fixes this issue (but creates other issues)
I'm looking for information on this. Has anyone had the same happen? Is it confined to sans-EDID displays?
Have googled a lot but I'm running out of search terms... Anything could be of help?
Thanks in advance.

Again, this is not the gamma problem that's fixed by just opening the display preferences and resetting the colour profile.
This seems to be somehow related to the display's EDID and the video adapter (Nvidia) not resetting properly when first unplugged and then plugged back in. My support request with Apple is more than a year old in total now and replies have been trickling but all of them add little (if anything at all) to a fix.
My particular problem is finding these "a lot of" people who are experiencing this problem. Everyone I've seen so far talks about the gamma/colours problem, never about the brightness and reboot. So yours is the first instance of someone having exactly the same problem. Hopefully we can find more people? Do you know where I should be looking?
Another idea I've had is to possibly talk to the OSX86 community? If Apple are not interesting in issuing a fix for this, maybe someone else has done some work? After reviewing Apple's code (at least that part which is made public) I'm pretty convinced this is in Nvidia's territory, and that gives me very little hope..
I'm interested to know if this has been fixed on Lion at all..? Ideas?

Single Beep, Display cuts out, then comes back

I've had my macbook for a little over a year. Recently the hard drive died. I replaced it, and figured I'd put new memory in it while I was at it (2GB, Samsung). For a while I ran 10.4 (I was on vacation and didn't have access to my external), and everything seemed to work fine. When I finally got back to my apartment and restored my system with Time Machine, things started off well, but then some weird things started happening. First, when I installed new updates, my computer restarted itself a couple times during the installation (after the initial restart), but then stopped, and installation was successful. I figured things had resolved themselves, but then I started getting these weird problems.
When I close my macbook, it goes into standby, but will sometimes start up randomly while still closed. Also, when I go to open it, it will sometimes load, only to cut out again, make a single loud beep, and then come back and boot up fine.
I've read that a single beep usually means a RAM issue, but I'm curious if the problem is maybe with my system, and I should reformat, since it seemed to run fine with 10.4.
Hopefully I've been detailed enough, but let me know if you need more info. Any help is greatly appreciated.

Not resolved!

Why is my HDMI-connected display cutting out periodically?

I have a Mac Mini hooked up to a 40" Phillips LCD LED 1080p television using an HDMI cable. This setup worked awesome for about six months, but it has started giving me problems this week. I never really used the television for anything besides as a display for the Mini until last week, when I plugged in a couple of different older video game consoles (N64 and a PS2) into the YPbPr ports and switched sources on the T.V. Not sure if this is related or not, but it seems like that's when I started having these probelms. From what I've read about HDMI handshaking, it makes sense that switching devices can mess with it?
Anyway, the visible problem is that periodically, the video AND audio will cut out and the display goes blue. Audio usually comes back a little before video does, and sometimes the Mini will try to play the audio in the interim.
It happens more often when I'm playing videos on Netflix, YouTube, etc., but it has happened when I'm just sitting on the Desktop, not doing a thing. It will sometimes not do it for up to an hour, and then it'll start doing it every five minutes so that you can't even watch video.
I've tried two different HDMI ports. Don't have another cable to try, but would rather not invest the money in a new, good one if that's not the problem. Any ideas?

Something to check first.
The Mac (all Macs) has an energy-save setting which will automatically power down the video connection if the Mac detects you have not used the mouse or keyboard for a defined period. This might be the cause. Similarly many TVs also have an energy saver setting, in the case of the TV it might trigger if you have not changed channel for a number of hours, or it might have an IR sensor to try and detect the heat of a human body. If it does not detect a person 'watching' it, it would then turn off.
In your case the former sounds more likely. Open System Preferences, then click on Energy-Saver and check the settings.
Note: If the Mac does disable the video output due to this setting, it will almost certainly result in sound being switched back to the built-in speaker instead of going via the HDMI.

External speakers cutting out internal speakers

I use my iMac for making music and have powered external studio monitors connected via the optical out jack. If I'm just browsing and don't switch the monitors on I get no sound from the iMac's internal speakers without unplugging the monitors. Obviously it's not the greatest problem in the world, but I was wondering if there is a simple tick box that I've missed or bit of software that would keep the internal speakers live even when there is a line out connected?

External speakers will generally be favoured as the primary line by default. I think this is because the system assumes you wouldn't connect speakers if you didn't want to send sound to them. The only way to play to another source while they are still connected is to go to System Preferences - Sound Preference Pane. In here you can select your output. You can select the internal speakers instead of the external. The problem is you have to go to the sound preference pane again later to switch it back. It is a bit of a pain.
I'm looking for a pair of Studio Monitors that have an optical connection myself. What monitors are you using? I am having a hard time finding a good pair. Everything has either XLR or RCA in and I would prefer a digital connection.
Take care.

Mac pro cinema display cuts out and can't access Mac with screen sharing

Hi
A weird thing has started happening to my Mac Pro today. After using it for a few minutes the cinema display it is attached to on the Mac Pro just goes black. The Mac Pro is clearly still on - the light is on and i can hear the fans. The Mac Pro shows up on my local network and i can connect to it and access files from my Macbook, but screen sharing doesn't work (i just get the message 'contacting mac pro' and nothing else) and i can't connect to shared iTunes library either, which makes me think it is not just a display issue. I cannot wake the computer with the mouse or keyboard, which makes me think it isn't just a sleep issue. All i can do is physically turn the Mac Pro off, start it up and it will start up successfully and then work for a few more minutes before i get the same problem. I have reset the PRAM and SMC and still have the same problems. Can anyone suggest anything else i can try?
I should mention that i have another problem with the Mac Pro in that it has been spontaneously waking up from sleep and starting up from shutdown, and i still haven't resolved this. I don't know if it is connected to the above issue.
thanks
nick

I have experienced almost the exact same thing with my new 2008 Mac Pro and my 30" Apple display. It has happened to me twice in the last few weeks. The first time I chalked it up to a fluke, but now that it's happened again I searched the forums. In both cases I've had music playing in iTunes which continues playing, goes on to the next track, and so on. So the machine has not crashed in full. I too can connect to the files via another computer on the network, but cannot share the screen.
I have not had the sleep issues you have had.
I'll look at the link you provided in your next post to see where that gets me, but I wanted to let you know you were not alone on this one.

OVMS - Local display cuts out after boot DMS 59 Video Card

Hey All -
We use OVM/OVS on what you might call 'desktop servers'. We have several setup. We recently purchased some more machines that I am installing OVS onto and will add them to the cluster.
However, these machines only video connection is DMS 59. As such, we are using a default DMS 59 to DVI splitter, and then just running a single connection from the splitter to a DVI capable monitor.
Using this, OVS can be installed. However, on each successive boot after installing the display will show GRUB, the boot, and then right before OVS loads its console the display ceases to function.
Now I assume this has to do with our DMS 59 connections - but I can't find any documentation about why this may not be supported or if I am missing a driver.
Thoughts?
Edited by: 1009782 on Jun 4, 2013 11:46 AM

The bug is known, and a patch has been submitted: https://bugs.freedesktop.org/show_bug.cgi?id=80151. There's been no update since friday, so I wonder what the current status is, or if it's up for review at all.
Does anyone know how we can be notified when this patch hits the kernel?

My rMBP HDMI display cuts out once per session

I have a rMBP (15 inch) that I use mostly with the lid closed and connected to dual monitors, (both identical ASUS monitors with HDMI and DVI-D connections). I use the Thunderbolt DVI-D adapter and a HDMI cable. When either running Windows 7 via Bootcamp or using Mountain Lion, the HDMI connection goes dark for about 3-5 seconds when I first start using the computer, then the picture reappears. The DVI-D connection is not affected.
All software updates are current and I've switched monitors and cables to no avail. Has anyone else encountered this issue?

Thanks. We are using the same setup the salesman sad he had at home: Mac Mini as media server with TV as monitor. We bought the server, not for the services, rather for the two 500GB drives. We let the default services run when we first set it up. I suppose I could shut everything non-essential down and see what happens.
I finally isolated the problem to today to either the HDMI cable, the miniDVI-to-HDMI adapter, or the Mac Mini itself. I would love for it to be just the adapter. Funny thing is the guy who sold us the system didn't know an adapter came with it so he sold us another one--which we promptly took back. Blergh!
This was supposed to be an easy migration. Imagine the naivete!
-starkravingchad

Sustained use of Cinema display audio results in noise, choppy audio, then cutting out

When I play a sustained audio stream through my 27" LED Cinema display – for example, listening to my music collection on iTunes – for a couple hours (since I powered on my computer), the audio suddenly gets very noisy and after a few seconds really choppy (+ noisy), and waiting another few seconds it's barely audible (just repeated hints of noise). After this happens, I can press Pause in iTunes, wait a few seconds, then press Play, and the audio is perfectly fine again.
Then, after only a half hour or less, the same thing happens, and I have to do the same thing to fix it. I am always able to fix the audio perfectly fine, but it inevitably craps out again after 5-30 minutes.
If I power off my computer or let it sleep overnight, then come back and play iTunes again, the audio will be fine for a few hours before this inevitably happens again.
I've followed the advice of an Apple support technician of resetting both my NVRAM and SMC, and that had no effect. The Cinema display audio continues to behave the same.
I have the USB for the Cinema display plugged directly into my MBP's USB port (no other USB hub in the way).
I have the latest version of OS X and thus the 27" Cinema Firmware 1.0 update has already been applied (I tried applying it by downloading the firmware update manually, but it refused, saying I do not need this update).
This should go without saying, but this never happens when I play music through my MBP's built-in speakers, or when I play music through external speakers plugged into the line-out port. It's behaviour that happens exclusively through the 27" Cinema display's audio interface.
Thoughts, anyone?
I'm especially curious whether anyone else has had precisely this kind of audio problem with their 27" Cinema display. I've seen many people post audio issues relating to their 27" Cinema display, but most of those problems were remedied by the 1.0 firmware update, and besides none of the problems were described quite like mine (specifically, audio that becomes noisy, then mostly cuts out - it never completely cuts out - and that can be reliably [temporarily] fixed by pausing and playing the audio again).

Can an MBP Sound preferences output to the display as opposed to through usb? I use a mac pro and have those two choices for my mini-displayport 27" apple display.
I am not suggesting this as a fix but only testing various other paths to try to diagnose the problem.
What first came to mind in your description was that you are having some kind of temperature problem. And I think the temp problem lies with the MBP and not the display. To that end you might consider adding one of the temp monitor utilities like iStat Pro, iStat Menus, Temperature Monitor, Temperature Monitor widget, Hardware Monitor, etc. See if there some correlation with the temps shown in some of the readings and your sound problem.

Why does my mini display port to hdmi adapter cut out intermittently?

I have a MacBook Air 2012. Using a bestbuy mini display port to hdmi adapter connecting to a sony led tv. The picture and sound transmits to the tv, but the signal would cut out after 10-15 seconds and it would last about 3-5 seconds and then the picture would come back again.

to me something happened similar to me but after removing the connector and put it back was solved, and now to use it with my TV I have to make sure both are well connected to both the Mac and plug the HDMI cable and adapter tv .
I hope that solves your problems resolved as mine
Blessings.
a me me a pasado algo similar pero luego de sacar el conector y volverlo a poner se soluciono, y ahora para poder usarlo con mi TV tengo que asegurarme que esten bien conectados ambos tanto el conector al mac como el cable hdmi al tv y al adaptador.
espero que eso resuelva tus problemas como resolvio los mios
Bendiciones.

Video out to external display

Hello, Is there a way to get video out to an external display? I currently have a T5, but am getting a TX. Should be the same for each, though. Rregards, Karl
Post relates to: Palm TX

Just a quick FYI...T5 and TX both have a "normal" 3.5mm audio jack.
Video will be a problem though. It's a shame my cheap little Insignia media player can output Audio and Video via a simple cable.
Wyrenut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Display issue coming out of sleep (w/ external display)

Hey everyone,
I've a MacBook Pro with Retina display. running 10.8.2 (and Win7 x64, via Bootcamp).
I somtimes experience trouble coming out of sleep with no external display connected, if the MacBook was connected to an external display when I sent it to sleep and the integrated display's brightness was turned all the way down. Basically, the MacBook's integrated display won't light up. I then need to hold down the power button until the machine powers off, and start it up again. Only then will the display come on, and the machine start normally.
I've been observing this with both an external Thunderbolt Display, and a TV connected through the HDMI port. I don't think this is a Mac OS issue, as I've seen similar behavior on this same machine, running Windows, under Bootcamp.
An example scenario: I'll be using the Thunderbolt Display, or watching a movie on my TV, with the integrated display's brightness turned all the way down, and then, while the display is still connected, I will close the lid - The machine will go to sleep. I will then come the next day, and while the computer is asleep, disconnect the external display, and open the lid. The MacBook's integrated display will not light up, the brightness keys will not respond, and I will need to force-shutdown the machine, and start it again - it will then start up, and usually fall back to the lowest display resolution setting (even though I always use much higher resolutions on both the integrated and external displays).
I'm guessing this is happening because the computer is expecting the external display that was connected to it, during its last operation, to still be available, and when it's not - it panics!
Also, I had times where this happened, and a force-shutdown would not do the trick. I had to actually connect back to the external display, wait for the machine to start normally, take the integrated display's brightness back up, and disconnect the external display. The machine would then resume normal operation, and I would be able to disconnect the external display and work on the integrated display.
Has anyone else experienced this, or anything similar?

There we go. Here's the complete Console report, up until the reboot, which fixed things. I can't make anything out of this, but perhaps someone else can.
13/10/12 8:37:29.010 AM loginwindow[535]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
13/10/12 8:37:29.041 AM com.apple.launchd[1]: (com.apple.emond.aslmanager[2845]) Exited with code: 255
13/10/12 8:37:29.468 AM hidd[540]: MultitouchHID: device bootloaded
13/10/12 8:37:29.000 AM kernel[0]: Wake reason: EC.LidOpen EHC1 (User)
13/10/12 8:37:29.000 AM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
13/10/12 8:37:29.000 AM kernel[0]: RTC: PowerByCalendarDate setting ignored
13/10/12 8:37:29.000 AM kernel[0]: Previous Sleep Cause: 5
13/10/12 8:37:29.000 AM kernel[0]: The USB device HubDevice (Port 1 of Hub at 0x1d000000) may have caused a wake by issuing a remote wakeup (2)
13/10/12 8:37:29.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
13/10/12 8:37:29.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
13/10/12 8:37:29.000 AM kernel[0]: The USB device HubDevice (Port 8 of Hub at 0x1d100000) may have caused a wake by issuing a remote wakeup (3)
13/10/12 8:37:29.000 AM kernel[0]: TBT W (2): 0x0100 [x]
13/10/12 8:37:29.000 AM kernel[0]: The USB device BRCM20702 Hub (Port 1 of Hub at 0x1d180000) may have caused a wake by issuing a remote wakeup (3)
13/10/12 8:37:29.000 AM kernel[0]: The USB device Bluetooth USB Host Controller (Port 3 of Hub at 0x1d181000) may have caused a wake by issuing a remote wakeup (3)
13/10/12 8:37:29.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
13/10/12 8:37:30.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96 MAC AUTH succeeded
13/10/12 8:37:30.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
13/10/12 8:37:30.000 AM kernel[0]: AirPort: Link Up on en0
13/10/12 8:37:30.000 AM kernel[0]: en0: BSSID changed to 68:7f:74:a1:24:96
13/10/12 8:37:30.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
13/10/12 8:37:31.000 AM kernel[0]: AirPort: RSN handshake complete on en0
13/10/12 8:37:31.982 AM airportd[2838]: _doAutoJoin: Already associated to “w00***”. Bailing on auto-join.
13/10/12 8:37:32.459 AM configd[17]: network changed: v4(en0+:192.168.1.104) DNS+ Proxy+ SMB
13/10/12 8:37:32.498 AM UserEventAgent[11]: Captive: en0: Not probing 'w00***' (protected network)
13/10/12 8:37:32.514 AM configd[17]: network changed: v4(en0!:192.168.1.104) DNS Proxy SMB
13/10/12 8:37:35.780 AM com.apple.usbmuxd[518]: SCEDeviceSocketCallback USBMuxRecvWithTimeout failed for 0x10020cb90-iTunes/com.apple.iTunes:0->0x3d-192.168.1.101:0:0: 54 - Connection reset by peer
13/10/12 8:37:35.781 AM iTunes[2272]: _receive_message (thread 0x117992000): Could not securely receive message size: SSL_ERROR_SYSCALL (Early EOF reached)
13/10/12 8:37:36.284 AM iTunes[2272]: _send_message (thread 0x117992000): Could not securely send message size 406: SSL_ERROR_SYSCALL errno (Broken pipe).
13/10/12 8:37:36.286 AM iTunes[2272]: AMDeviceStopSession (thread 0x117992000): Could not stop session with device 61: kAMDSendMessageError
13/10/12 8:37:57.165 AM com.apple.usbmuxd[518]: _handle_timer heartbeat detected detach for device 0x3d-192.168.1.101:0!
13/10/12 8:38:14.000 AM kernel[0]: NVDA::setPowerState(0xffffff8026183800, 0 -> 2) timed out after 45406 ms
13/10/12 8:39:25.000 AM bootlog[0]: BOOT_TIME 1350110365 0
13/10/12 8:39:30.000 AM kernel[0]: PMAP: PCID enabled
13/10/12 8:39:30.000 AM kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
13/10/12 8:39:30.000 AM kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
13/10/12 8:39:30.000 AM kernel[0]: vm_page_bootstrap: 4043614 free pages and 117922 wired pages
13/10/12 8:39:30.000 AM kernel[0]: kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
13/10/12 8:39:30.000 AM kernel[0]: zone leak detection enabled
13/10/12 8:39:30.000 AM kernel[0]: standard timeslicing quantum is 10000 us
13/10/12 8:39:30.000 AM kernel[0]: standard background quantum is 2500 us
13/10/12 8:39:30.000 AM kernel[0]: mig_table_max_displ = 74
13/10/12 8:39:30.000 AM kernel[0]: TSC Deadline Timer supported and enabled
13/10/12 8:39:30.000 AM kernel[0]: corecrypto kext started!
13/10/12 8:39:30.000 AM kernel[0]: Running kernel space in FIPS MODE
13/10/12 8:39:30.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
13/10/12 8:39:30.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
13/10/12 8:39:28.977 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for Sandbox
13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for Quarantine
13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
13/10/12 8:39:30.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
13/10/12 8:39:30.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
13/10/12 8:39:30.000 AM kernel[0]: MAC Framework successfully initialized
13/10/12 8:39:30.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
13/10/12 8:39:30.000 AM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
13/10/12 8:39:30.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 889A
13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
13/10/12 8:39:30.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
13/10/12 8:39:30.000 AM kernel[0]: [ PCI configuration begin ]
13/10/12 8:39:30.000 AM kernel[0]: Sleep failure code 0x00000002 0x27006c00
13/10/12 8:39:30.000 AM kernel[0]: console relocated to 0xfd0020000
13/10/12 8:39:30.000 AM kernel[0]: PCI configuration changed (bridge=17 device=5 cardbus=0)
13/10/12 8:39:30.000 AM kernel[0]: [ PCI configuration end, bridges 12 devices 16 ]
13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management
13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::start - type 2 sleep enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::start - SXFP method found
13/10/12 8:39:30.000 AM kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
13/10/12 8:39:30.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
13/10/12 8:39:30.000 AM kernel[0]: rooting via boot-uuid from /chosen: D6807041-7128-30C2-9A2D-BFEEC3331CEE
13/10/12 8:39:30.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
13/10/12 8:39:30.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE SSD SM768E Media/IOGUIDPartitionScheme/Customer@2
13/10/12 8:39:30.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 3
13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: replay_journal: from: 4020736 to: 10443264 (joffset 0x12ada000)
13/10/12 8:39:30.000 AM kernel[0]: BTCOEXIST off
13/10/12 8:39:30.000 AM kernel[0]: BRCM tunables:
13/10/12 8:39:30.000 AM kernel[0]: pullmode[1] txringsize[ 256] reapmin[   32] reapcount[ 128]
13/10/12 8:39:30.000 AM kernel[0]: highWaterMark: VO[ 192] VI[ 192] BE[ 192] BK[ 192]
13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: examining extra transactions starting @ 10443264 / 0x9f5a00
13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: Extra txn replay stopped @ 11364864 / 0xad6a00
13/10/12 8:39:30.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
13/10/12 8:39:30.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
13/10/12 8:39:30.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: journal replay done.
13/10/12 8:39:30.000 AM kernel[0]: Kernel is LP64
13/10/12 8:39:30.000 AM kernel[0]: hfs: Removed 27 orphaned / unlinked files and 2233 directories
13/10/12 8:39:28.977 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
13/10/12 8:39:30.783 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
13/10/12 8:39:31.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address 20:c9:d0:48:ea:41
13/10/12 8:39:31.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
13/10/12 8:39:31.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished():
13/10/12 8:39:32.037 AM airportd[25]: _processDLILEvent: en0 attached (down)
13/10/12 8:39:32.000 AM kernel[0]: createVirtIf(): ifRole = 1
13/10/12 8:39:32.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
13/10/12 8:39:32.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff802247e400
13/10/12 8:39:32.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
13/10/12 8:39:32.000 AM kernel[0]: Created virtif 0xffffff802247e400 p2p0
13/10/12 8:39:32.080 AM com.apple.SecurityServer[15]: Session 100000 created
13/10/12 8:39:32.000 AM kernel[0]: AirPort: Link Down on en0. Reason 1 (Unspecified).
13/10/12 8:39:32.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
13/10/12 8:39:32.101 AM configd[17]: network changed.
13/10/12 8:39:32.103 AM configd[17]: setting hostname to "w00fa.local"
13/10/12 8:39:32.112 AM com.apple.SecurityServer[15]: Entering service
13/10/12 8:39:32.193 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
13/10/12 8:39:32.000 AM kernel[0]: Previous Shutdown Cause: 3
13/10/12 8:39:32.000 AM kernel[0]: IOBluetoothUSBDFU::probe
13/10/12 8:39:32.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8286 FirmwareVersion - 0x0097
13/10/12 8:39:32.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
13/10/12 8:39:32.000 AM kernel[0]: AGC: 3.2.11, HW version=3.2.19 [3.2.8], flags:0, features:20600
13/10/12 8:39:32.000 AM kernel[0]: NVDAGK100HAL loaded and registered.
13/10/12 8:39:32.586 AM fseventsd[144]: event logs in /.fseventsd out of sync with volume. destroying old logs. (87566 7 87588)
13/10/12 8:39:32.586 AM fseventsd[144]: log dir: /.fseventsd getting new uuid: A93F6A97-D1D4-4728-9B86-3AB73E58340C
13/10/12 8:39:32.599 AM mDNSResponder[146]: mDNSResponder mDNSResponder-379.32.1 (Aug 31 2012 19:05:06) starting OSXVers 12
13/10/12 8:39:32.645 AM systemkeychain[148]: done file: /var/run/systemkeychaincheck.done
13/10/12 8:39:32.652 AM configd[17]: network changed: DNS*
13/10/12 8:39:32.654 AM mDNSResponder[146]: D2D_IPC: Loaded
13/10/12 8:39:32.654 AM mDNSResponder[146]: D2DInitialize succeeded
13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Version 2012.3.3 (Jul 26 2012 08:57:03) external FUSE 27
13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Mounted /dev/rdisk0s4 (Read-Write, label "BOOTCAMP", NTFS 3.1)
13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Cmdline options: recover,cbcio,sfmconv,streams_interface=openxattr,native_xattr,nfconv,aligned_i o,fstypename=txantfs,fssubtype=0,iosize=1048576,local,adaptiveuid,adaptivegid
13/10/12 8:39:33.246 AM tuxera_ntfs[509]: Mount options: native_xattr,fstypename=txantfs,fssubtype=0,iosize=1048576,local,allow_other,no nempty,relatime,fsname=/dev/disk0s4,volname=BOOTCAMP
13/10/12 8:39:33.000 AM kernel[0]: DSMOS has arrived
13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
13/10/12 8:39:33.000 AM kernel[0]: Universal Audio Apollo - 4.0.0.13440 (x86_64) Mar 12 2012 20:19:07
13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
13/10/12 8:39:33.000 AM kernel[0]: TUFS: starting (version 2012.4.17, x86_64 (10.6+), built Apr 17 2012, 11:40:41)
13/10/12 8:39:33.246 AM tuxera_ntfs[509]: License: Valid.
13/10/12 8:39:33.246 AM tuxera_ntfs[509]: Ownership and permissions disabled, configuration type 1
13/10/12 8:39:33.301 AM fseventsd[144]: check_vol_last_mod_time:XXX failed to get mount time (22; &mount_time == 0x10ee45528)
13/10/12 8:39:33.301 AM fseventsd[144]: log dir: /Volumes/BOOTCAMP/.fseventsd getting new uuid: C0009105-8F61-43E9-8563-1BB388632E71
13/10/12 8:39:33.393 AM hidd[540]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
13/10/12 8:39:33.409 AM kdc[538]: label: default
13/10/12 8:39:33.409 AM kdc[538]:           dbname: od:/Local/Default
13/10/12 8:39:33.409 AM kdc[538]:           mkey_file: /var/db/krb5kdc/m-key
13/10/12 8:39:33.409 AM kdc[538]:           acl_file: /var/db/krb5kdc/kadmind.acl
13/10/12 8:39:33.432 AM appleeventsd[545]: main: Starting up
13/10/12 8:39:33.435 AM kdc[538]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
13/10/12 8:39:33.451 AM com.apple.usbmuxd[518]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
13/10/12 8:39:33.507 AM loginwindow[535]: Login Window Application Started
13/10/12 8:39:33.508 AM kdc[538]: KDC started
13/10/12 8:39:33.510 AM awacsd[549]: Starting awacsd connectivity-78 (Jul 26 2012 14:37:46)
13/10/12 8:39:33.512 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
13/10/12 8:39:33.513 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
13/10/12 8:39:33.000 AM kernel[0]: macx_swapon SUCCESS
13/10/12 8:39:33.513 AM awacsd[549]: InnerStore CopyAllZones: no info in Dynamic Store
13/10/12 8:39:33.520 AM aosnotifyd[552]: bootstrap_look_up failed (44e)
13/10/12 8:39:33.539 AM locationd[536]: NOTICE,Location icon should now be in state 0
13/10/12 8:39:33.539 AM locationd[536]: locationd was started after an unclean shutdown
13/10/12 8:39:33.611 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
13/10/12 8:39:33.613 AM coreservicesd[27]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
13/10/12 8:39:33.615 AM mds[532]: (Normal) FMW: FMW 0 0
13/10/12 8:39:33.619 AM WindowServer[567]: Server is starting up
13/10/12 8:39:33.624 AM WindowServer[567]: Session 256 retained (2 references)
13/10/12 8:39:33.624 AM WindowServer[567]: Session 256 released (1 references)
13/10/12 8:39:33.635 AM WindowServer[567]: Session 256 retained (2 references)
13/10/12 8:39:33.636 AM WindowServer[567]: init_page_flip: page flip mode is on
13/10/12 8:39:33.000 AM kernel[0]: en0: 802.11d country code set to 'US'.
13/10/12 8:39:33.000 AM kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
13/10/12 8:39:33.898 AM fseventsd[144]: Logging disabled completely for device:1: /Volumes/Recovery HD
13/10/12 8:39:34.000 AM kernel[0]: nspace-handler-set-snapshot-time: 1350110375
13/10/12 8:39:34.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96 MAC AUTH succeeded
13/10/12 8:39:34.831 AM WindowServer[567]: mux_initialize: Mode is dynamic
13/10/12 8:39:34.847 AM WindowServer[567]: GLCompositor enabled for tile size [256 x 256]
13/10/12 8:39:34.847 AM WindowServer[567]: CGXGLInitMipMap: mip map mode is on
13/10/12 8:39:34.933 AM WindowServer[567]: WSMachineUsesNewStyleMirroring: true
13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[840 x 525], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x5 for display 0x042803c0
13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x6 for display 0x003f003f
13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x7 for display 0x003f003e
13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x8 for display 0x003f003d
13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[840 x 525], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003f: GL mask 0x8; bounds (1864, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003e: GL mask 0x4; bounds (1865, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003d: GL mask 0x2; bounds (1866, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
13/10/12 8:39:34.936 AM WindowServer[567]: CGXPerformInitialDisplayConfiguration
13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x042803c0: MappedDisplay Unit 0; Alias(0, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[840 x 525], Rotation 0, Resolution 2
13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1864,0)[1 x 1], Rotation 0, Resolution 1
13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1865,0)[1 x 1], Rotation 0, Resolution 1
13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1866,0)[1 x 1], Rotation 0, Resolution 1
13/10/12 8:39:34.936 AM WindowServer[567]: CGXMuxBoot: Boot normal
13/10/12 8:39:34.998 AM WindowServer[567]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x00004733, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
13/10/12 8:39:35.001 AM WindowServer[567]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
13/10/12 8:39:35.001 AM WindowServer[567]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004d23, unit 4, caps QEX|QGL|MIPMAP, vram 580 MB
13/10/12 8:39:35.003 AM WindowServer[567]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
13/10/12 8:39:35.006 AM loginwindow[535]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
13/10/12 8:39:35.014 AM hidd[540]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
13/10/12 8:39:35.050 AM WindowServer[567]: Unable to open IOHIDSystem (e00002bd)
13/10/12 8:39:35.092 AM WindowServer[567]: Created shield window 0x9 for display 0x042803c0
13/10/12 8:39:35.092 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
13/10/12 8:39:35.108 AM launchctl[585]: com.apple.findmymacmessenger: Already loaded
13/10/12 8:39:35.124 AM com.apple.SecurityServer[15]: Session 100005 created
13/10/12 8:39:35.146 AM hidd[540]: CGSShutdownServerConnections: Detaching application from window server
13/10/12 8:39:35.146 AM hidd[540]: CGSDisplayServerShutdown: Detaching display subsystem from window server
13/10/12 8:39:35.163 AM loginwindow[535]: Login Window Started Security Agent
13/10/12 8:39:35.223 AM SecurityAgent[594]: This is the first run
13/10/12 8:39:35.223 AM SecurityAgent[594]: MacBuddy was run = 0
13/10/12 8:39:35.249 AM WindowServer[567]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x10158a320 isBackBuffered: 1 numComp: 3 numDisp: 3
13/10/12 8:39:35.281 AM coreaudiod[592]: 2012-10-13 08:39:35.280987 AM [AirPlay] Started browsing for _airplay._tcp.
13/10/12 8:39:35.281 AM coreaudiod[592]: 2012-10-13 08:39:35.281405 AM [AirPlay] Started browsing for _raop._tcp.
13/10/12 8:39:35.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
13/10/12 8:39:35.965 AM UserEventAgent[587]: cannot find useragent 1102
13/10/12 8:39:36.935 AM WindowServer[567]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
13/10/12 8:39:36.955 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
13/10/12 8:39:36.965 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
13/10/12 8:39:37.000 AM kernel[0]: directed SSID scan fail
13/10/12 8:39:39.274 AM SecurityAgent[594]: User info context values set for w00fa
13/10/12 8:39:39.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96 MAC AUTH succeeded
13/10/12 8:39:39.432 AM SecurityAgent[594]: Login Window login proceeding
13/10/12 8:39:39.618 AM loginwindow[535]: Login Window - Returned from Security Agent
13/10/12 8:39:39.631 AM loginwindow[535]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
13/10/12 8:39:39.657 AM loginwindow[535]: USER_PROCESS: 535 console
13/10/12 8:39:39.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
13/10/12 8:39:39.000 AM kernel[0]: AirPort: Link Up on en0
13/10/12 8:39:39.000 AM kernel[0]: en0: BSSID changed to 68:7f:74:a1:24:96
13/10/12 8:39:39.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
13/10/12 8:39:39.706 AM com.apple.launchd.peruser.501[610]: (com.apple.gamed) Ignored this key: UserName
13/10/12 8:39:39.706 AM com.apple.launchd.peruser.501[610]: (com.apple.gamed) Ignored this key: GroupName
13/10/12 8:39:39.708 AM com.apple.launchd.peruser.501[610]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
13/10/12 8:39:39.712 AM loginwindow[535]: Connection with distnoted server was invalidated
13/10/12 8:39:39.717 AM distnoted[615]: # distnote server agent absolute time: 15.385943220   civil time: Sat Oct 13 08:39:39 2012   pid: 615 uid: 501 root: no
13/10/12 8:39:39.000 AM kernel[0]: AirPort: RSN handshake complete on en0
13/10/12 8:39:39.967 AM WindowServer[567]: Received display connect changed for display 0x42803c0
13/10/12 8:39:39.998 AM WindowServer[567]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x10158a320 isBackBuffered: 1 numComp: 3 numDisp: 3
Thanks!
-w00f

HT6114 external display cutting out

Similar Messages

Maybe you are looking for