HT6114 Help! OS X 10.9.2 not installing even after repeated restarts.

Hello, I am trying to update from OS X 10.9 to 10.9.2 but every time I click on the update option it asks for restart even after the restart and after every restart it gets added in the completed downloads list . Please help !
Thank you !!

I found a fix, or rather, a work around for this 513 permissions error issue. It doesn't require you to reinstall the OS, or boot from the recovery partition. Note that booting from my installation drive and repairing permissions didn't work for me. Neither did running combo update, or anything else, such as repairing ACL permissions, etc.
Simply Carbon Copy Clone your primary, non updateable drive to another drive. I used the last free version of Carbon Copy Cloner.
Then, boot from that other drive. Notice that you can now download and update to 10.9.2. Do all the updates, repair permissions if you'd like, then Carbone Copy Clone the now updated 10.9.2 drive to the formerly non updateable drive. Boot from the new primary drive.
Done Dizzle.
B

Similar Messages

Firmware 1.1 upgrade will not install - even after uninstalling Parallels

I was asked to upgrade my firmware (on many occasions, actually). I go through the process and it will not install. It asks me to shut down the computer and continuing holding the button until the light blinks. It then makes a noise (high pitch tone), this stops, the mac screen comes up gray and a bar comes up and disappears immediately. The computer boots and then the firmware page opens and asks me to go through this again. I cannot get to "OK". I called Apple and was told this happens with Parallels installed and I should uninstall this. I have tried this and it makes no difference. There may be some files I should delete - but I wasn't instructed to do this.
HELP!!!!
Mac Pro Mac OS X (10.4.9) Parallels virtualization for XPpro

Hi Tom,
very easy by booting up from a Non-RAID-Boot Volume.
This could be an internal or even an external Drive, doesn't matter.
One of the reasons I have two external drives for my tow Macs.
Regards
Stefan

I-tunes will not install. even after i used all of the help offers.

Okay so, My computer has JUST recovered from a huge virus that decided to completely demolish everything but the computer was still able to be fixed. So i reinstalled windows and most of my drivers. Now i am trying to install I-tunes and it keeps giving me the message: An error occurred during the installation of assembly 'Microsoft.VC80.CRT,publickeyToken="1fc8b3b9a1e18e3b",type="win32",Version=8.0. 50727.762",processorArchitecture="x86"'.Please refer to Help and Support For more information. HRESULT: 0x80070424.
so if anyone has ANY idea what that means i would love for you to tell me cause its starting to anger me tremendously.

An error occurred during the installation of assembly 'Microsoft.VC80.CRT,publickeyToken="1fc8b3b9a1e18e3b"
,type="win32",Version=8.0.50727.762",processorArchitecture="x86"'
.Please refer to Help and Support For more information. HRESULT: 0x80070424.
Not the most common of iTunes installation error messages. That one often seems to be a side effect of the same problem that causes error 8007000b when you try to install Windows Vista updates.
To doublecheck, try getting some Windows Updates. If they error out with an 8007000b, try the following Microsoft troubleshooting document:
http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-8007000b
If that fixes your 8007000b, does your iTunes installation also go through properly afterwards?

Airport Express Not Showing Up After Repeated Restarts

Have a first Gen Airport Express and still using the same Macbook we always have, but the Airport is just not working properly any more. Here are the things I have tried:
- Hard restart, and properly configured the airport express to join my wireless network. My internet router says it is connected and the light is green on the airport but will not show up in iTunes or through the airport utility. The only way I can get the airport utility to read it is when I do the hard restart, but once it restarts, no airport...
- I have made sure the passwords and security types are correct
It was working fine for YEARS and now it just won't show up at all!
Any helps would be appreciated!

Welcome to the discussions forum jmpstar.
If you disabled wireless, Airport Utility will have no way to find it, wirelessly. You'll have to reset it by holding in the reset button until the LED flashes rapidly. You'll then be able to configure it again using Airport Utility.
The Airport Express forum is http://discussions.apple.com/forum.jspa?forumID=1011

Flash plugin will not install even after installing the latest version Flash

When I go to a site that contains Flash content, it says "A plugin is needed to display this content" and there is a link to install the plugin. Additionally, there is a message at the top of the page that says "Additional plugins are required to display all the media on this page" with an option to "Install Missing Plugins." I click the link to install the missing plugin, and a dialog box pops up that says "The following plugins are available:" and lists "Adobe Flash Player 11.0.1.152" with a check box next to it. The box is checked, and I click "Next" to install. It goes through the motions, and then tells me that "No plugins were installed." There is a link to manually install the plugin, which takes me to Adobe's Flash download page. I unchecked the box to pair McAfee Security with the download, and downloaded the latest version of Flash (to be honest, I've actually downloaded this exact same version about 10 times today). The dialog box pops up, I save the file, and once it has downloaded, I open the containing folder (my downloads folder). I then close all programs (including Firefox) except for the Windows Explorer folder that I'm going to run the installer from. I double-click on the Flash installer to run the installation. The installation process completes, the installer tells me that the download is successful, and my browser opens back up with an "Installation Successful" message from the Adobe website. Yay! My installation is successful... Orrrrrr not. Navigating back to the page with the Flash media - still have a message saying I need the plugin. Attempt to download plugin again...no dice.
THEN, I go to "Manage my add-ons" thinking maybe I need to enable the plugin. There is no Flash (or Shockwave) plugin listed on any of the menus - it's like it doesn't exist.
I downloaded the latest version of Java because I read somewhere that Flash requires Java to work; I installed the "Add-On Compatibility Reporter" so I could force Java to be enabled. It made no difference whatsoever, as best I can tell.
I also went to Adobe's page where you can see what version of Flash you're running (http://www.adobe.com/software/flash/about/) and it doesn't even show that I have Flash installed. In Internet Explorer, it does show that I have Flash installed, but it's the previous version (but that is likely due to the fact that I downloaded Flash from Mozilla, not IE, and they use different modes in each browser - so an update that you download from one browser does not necessarily apply to the other browser).
So in summary: I do not know what on earth is wrong here, but I am about as frustrated as I have ever been in my life. I don't know why the Adobe Flash installation is saying it is successful (is it lying to me??), but there is no plugin showing up in my Manage Add-Ons menu, and I have googled every possible combination of the content in this post and have not found a solution that works yet.

NOTE: Just discovered that Adobe is making a bigger mess than any previously.
They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
*32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
*64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe

Charter Security Suite will not install even after they removed my existing antivirus

This is important to me because I am a quadriplegic who relies on my laptop to connect me to the world outside my bed aND MY SMART TV for entertainment.I tried unsuccessfully to load Charter Security Suite, I then contacted Charter tech support on 7/30 who took me through gotoassist - He confirmed that I had no existing antivirus on my laptop. He took down my firewall and again was unsuccessful at downloading Charter Security Suite. After that time I get a warning my computer has no antivirus and my windows 7 computer is unable to get automatic updates. He told me he would report the problem and I could expect a call from 24 to 72 hours from F-SECURE.I did not receive the promised call. i don't know if he did something to my computer that made anything better, but my situation is definitely worse after uninstalluing the working version of macafee. But I am really worried after he said, "It is not a real big deal, just don't go to any weird websites!" Now that I am vulnerable, i AM VERY CONCERNED AND HAVE NOT HEARD FROM F-SECURE ABOUT RESOLVING MY ISSUES AND SUBSEQUENT CHARTER TECH SUPPORT CALLS HAVE NOT RESOLVED MY ISSUES. ps - I'm getting two red flag notices since 7/30 - one regarding my lack of antivirus, and one telling me windows could not automatically check for updates! HELPDaniel.

Hi Daniel, Sorry you're having hassle with this. I'm not familiar with the Charter Suite, but I assume from what you've said, it's a rebranding of F-Secure, so the advice I am suggesting below is based on that premise. The guy who said it's "not a big deal" having no anti virus was probably just trying to put your mind at rest, but in essence, he does have a point that if you stick to known safe websites, don't open any unexpected email attachments, and don't click on any popups, banner ads, or anything else which may look suspect, you should be fairly safe, as viruses don't tend to just appear out of nowhere, without any interaction from the user. That said, while this issue is ongoing, I would suggest that you download Malwarebytes and have that running as a backup. This is compatible with F-Secure so shouldn't cause any further installation issues, and will hopefully give you some piece of mind. The next thing I would suggest is to download and run the full McAfee uninstaller, which you should find linked to on this page of Uninstallation Tools. Once you have run the tool, then run the F-Secure Uninstallation Tool to fully remove any part installations of F-Secure, and try your installation again. As I said, the above is based on the assumption that Charter is the same as F-Secure in all but name - if this is incorrect, then I apologise in advance for any mis-information, but I don't think any of the above will do any additional harm to your computer. Let us know how you get on.

I have bought and downloaded the new iphoto but it is not installing. I have restarted my computer and the problem continues. Help!

I have bought and downloaded the new iphoto but it is not installing. I have restarted my computer and the problem continues. Help!

can you describe exactly what is happening? And give exact error messages
LN

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?

Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

Social App not working even after update from noki...

nokia n8 social loading feeds.
My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
Its now the 4th jan and the phones still will not work even after and update from a socail app,
nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds)

Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

In the middle of an update, it call closed. Itunes keeps saying that it's not installed, even though ive tried reinstalling multiple times. All my iphone is doing it showing the ituns symbol and a charger. How can I fix this???

In the middle of an update, it call closed. Itunes keeps saying that it's not installed, even though ive tried reinstalling multiple times. All my iphone is doing it showing the ituns symbol and a charger. How can I fix this???

Hi lepyykko,
If I understand your question, you are trying to update your iPhone, but you are seeing an error message that iTunes for Windows is not installed, is that right? The first step is to get iTunes successfully installed on your computer. Then backup the iPhone before updating the iOS software.
Are you seeing any error messages when you try to install iTunes for Windows?
If you can't install or update iTunes for Windows - Apple Support
https://support.apple.com/en-us/HT201668
Are you able to update your iPhone wirelessly?
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
https://support.apple.com/en-us/HT204204
Before you update
Back up your device to iCloud.
Update your device wirelessly
The easiest way to update your device is wirelessly, also called “over the air.” Here’s how:
Plug in your device to a power source.
Tap Settings > General > Software Update.
Tap Download and Install. Updates might download automatically while your device is connected to Wi-Fi and a power source.
Tap Install, or tap Later to install the update later. If you use a passcode, you'll need to enter it before installing the update.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/HT201263
I hope this information helps ....
- Judy

Hi tutor,my system preferences remains in hang and it does not respond even after force quit.May i have a advice la

my sytem preferences remains in hang and is not responding even after force quit,may i have suggestion la

Hello: Welcome to Apple Support Communities!
Could you specify the Mac OS X version and also what computer you
are using it on, with some detail? Some of these kinds of issues, while
they may seem the same across various years of OS X, can have
different causes and also different cures.
With that information, someone may be capable of researching a reply
most suited to try & see if it works in your computer + OS X system.
One idea, which may/may not help, would be to start the computer
from its most recent OS X DVD install disc, unless it has OS X 10.7
or Later, where there is a Recovery partition on the HDD to boot from.
Then use Disk Utility> repair disk, while there, also repair permissions.
Thanks.
Good luck & happy computing!

Permissions will not set, even after using terminal commands?

Hey,
I found a thread on here for using the terminal to type in commands for the user permissions and for the PSIX permissions on Leopard (10.5) server. These commands are supposed to clean the server of all underlying(hidden) permissions that you cant see and then you are supposed to be able to then set the permissions again and finally, to hit "Propagate Permissions" so that all the permissions set for the shared volume then get farmed out to all sub files/folders. This did not work when I tried it in the terminal, it said "Command not found" even after I typed in the admin password. Is there anyone out there who can tell me the actual way to fix the old permissions and get new ones set?
The story is: We had an old server on a G4 when i first took control of the server, I took the shared hard drive out of the G4 and inserted it into a G5 and started using it with the leopard server. the permissions did not really need to be set on that volume because they had carried over from the last time they were shared. But we recently just got a Drobo unit for our server and I recently transferred all the shared files and folders over to the new volume, but ever since I cant get the permissions to farm out to all the stations, it shows me that its done on the server. But when I go to access the files I am able to delete faculty folders where I had set the permissions to "read only" so I am wondering if there is a streamlined way of going about this or if I should just start from scratch and use all brand new HDD's?
Please Help!

Hi ..
Try the tips mentioned here > Mini-tutorial: Force-deleting stubborn or problematic files in Mac OS X

Error: Startup task doesn't exist. This is not a continuation after a restart

I want to try to install sharepoint 2013 on windows server 2008 r2 with sp1, but when I install the prerequistes, always restart again and again, I check the log file, found the below error:
2014-02-27 22:55:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-02-27 22:55:12 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-02-27 22:55:15 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-02-27 22:55:15 - Last return code (0X3EC=1004)
2014-02-28 03:27:05 - Error: A pending restart blocks the installation
2014-02-28 04:45:03 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-02-28 04:45:03 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-02-28 04:45:03 - Locating the following command line arguments file:
2014-02-28 04:45:03 - C:\SP2013_Chery\2Installation\Sharepoint\PrerequisiteInstaller.Arguments.txt
2014-02-28 04:45:03 - Error: This file does not exist
Awen

Hi Awen,
According to your description, my understanding is that you got an error when you installed prerequisities for SharePoint 2013.
Please run the following command, compare the result:
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable –i
Here is a similar post for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/37cc20db-6cc7-45e0-928c-9a1ddbdab2ae/the-tool-was-unable-to-install-application-server-role-web-server-iis-role?forum=sharepointadmin
In addition, there is a KB article about this issue, please take a look at:
http://support.microsoft.com/kb/2765260/en-us
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

HT6114 Help! OS X 10.9.2 not installing even after repeated restarts.

Similar Messages

Maybe you are looking for