HT6114 hi all, my cisco Router link sys E2000 stop working need to up date Mac OS 10.4.9 or 10.5.8 or 10.6.1later how do i find this program please help
hi all, my cisco router linksys E2000 stop working need to up date Mac OS 10.5.8 later or 10.5.8 or later or 10.6.1 or later where do i find this up date im new on mac computer please help
I just visited the Linksys e2000 page, I think you need 10.6. You can buy it here:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Similar Messages
-
I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
Please help me..Accidental damage is not covered under Apple warranty. And it seems there is much accidental damage. Only a Genius Bar tech looking at it can tell how much it will cost to repair.
Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs. -
I downloaded Itunes to my computer today to update my ipod's ios (4.2.1 yes i know im way behind) but when i click check for updates it tells me my ios is the current one. How can i fix this? please help!
and at the same time....
I guess you can be glad that you at least aren't "way behind"!
Cheers,
GB -
I have all my itunes on one computer and have brought another and need to transfer all my music etc to new one, how do i do this? please help its doing my head in!
Hey allen72,
Thanks for the question. I understand you wish to transfer your iTunes library to a new computer. There are a few different options for doing so, the following article provides more information:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Thanks,
Matt M. -
Safari won't work. It flashes an alert. Alert says that a Suspicious Activity Might Have been Detected. Major Security Issue. How do i fix this? Please help. Thanks!
You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
com.something.daemon.plist
and
com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?
Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you... -
Why can't I buy any app ? Iv tried creating a new Appel account ect but it says the same thing everytime . Sorry your payment was declined . How can I sort this ? Please help
- Try another payment method.
- Contact iTunes
Apple - Support - iTunes - Contact Us
- Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me
Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
I am trying to download a DAW (Cubase Elements 7) it downloads almost completely 1.02GB out of 2.41GB then the download stops ...... I try to resume it but Apple tells me I don't have permission to do this..PLEASE HELP ME!!!
If this is an App Store issue, contact http://www.apple.com/support/mac/app-store/contact/
You can try repair permissions with Disk Utility.
Also make sure your hard drive isn't over 85% full after a full installation of Cubase Elements looking up its system requirements. -
Im Using iPhone 4 factory Unlocked device iOS 7, but device was feels slow, so i want to restore to iOS 6.1.3. how can i do this? please help me anyone itz urgent.
As has always been the case, you cannot go back.
Sorry -
Hi! My friend offer me a iphone 4s upgraded to ios7. The phone need and icloud account. and my friend didn't remember his email address and password. How can i bypass this. Please help.
Sorry, there's no way around Activation Lock. So, give the phone back to your "friend", as you will never be able to use it.
Apple can't/won't help you. -
Hi, in my IMac I, have not install a softwear call Motrorola and is asking for update, so my queestion is how do i find this program and delete and other that I have not install in my IMac. And how do I, maintenance on my computer running good and keep it free from any virus.
Thank You.rkaufmann87 wrote:
Regarding "install a softwear call Motrorola" please provide additional information such as where you got this app and why you want to install it. It sounds like it's for some type of Motorola device so please provide additional information.
The quote was "I have not install a softwear call Motrorola" (my emphasis).
But something with that name is asking to update.
gabrielneron
As Motorola's primary product line is mobile phones, could you have put some 'phone syncing software on your Mac? -
the sound on my ipad 3 suddenly stopped working i dont know why i tried the last two days to fix it and also restored it and the sound never came back, please help.....
Do you get sound on any apps e.g. Music and Videos but not others ? If you do then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
HT1443 I need to upgrade my MAC Os X 10.4.11 TO be 10.6 or greater. How can I do this?
I need to upgrade my MAC OS X 10.4.11 to be 10.6 or greater. How do I do this?
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help
Hey nocillado,
Thanks for using Apple Support Communities.
It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using the same Apple ID for Store purchases and iCloud (recommended)
Have a nice day,
Mario
Maybe you are looking for
-
What is the definition of 'item' in Elements 6?
I am about to convert to Elements 7 and have noticed a small issue that I can't find the answer to. It is probably trivial but before I go on to Elements 7, I would like to understand the meaning of the word 'item'. At the bottom of the Organizer sc
-
How to generate Excel files in Oracle Reports
Hi, I've already built a JSP using oracle reports and Deploy on the report service. I also add a button to the left of the JSP.The next thing I want to do is:when user click on the button, the system will prompt a excel file contains the same content
-
I have added anchors to a page in DW CS3 and they work in all browsers except IE. Is that just one of those IE things? Is there a workaround?
-
hi , Actually i am an MM Guy and i am newly assigned for QM field and i already maintained SAP QM and MM integration , please suggest what the thing i mantained, edit and add so that i done the QM with PP module integration too Your suggestion is ver
-
Using BASIS data for system monitoring.
Hi, We are looking for some BASIS transactions data(ex ST02,SM21) to be captured and send out of SAP. is there any existing functionality via which the output of the transactions can be captured from the output screen. Is any way using ABAP program b