HT6114 I cannot log in to my AOL after installing OSX Mavericks
Why can I cannot log into to my AOL account after installing OSX Mavericks?
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
Similar Messages
-
Newbie Question - Cannot log onto htmldb admin user after new v2 install
Hi
Cannot log onto admin user.
htmldb v2 - installed fine on db
Oracle Server - 9.2.0.5
9i Application Server (httpd 1.0.2.2.2). This part of the ebso 11.5.10 stack. Many
reasons why i had to do this but i could not see a compat issue ? This is only
test bed as well, not a production configuration.
Followed all v2 post-install tasks - httpd.conf/wdbsvr.app .
DAD/modplsql config OK.
On connection to admin interface - host:port/pls/htmldb/htmldb_admin, gives what i would call the 'standard' browser logon page ? Not the htmldb logon template
Thought it may be issue with images alias but don't really know and cannot see issue with config files ?
Regards
ADo you have an alias setup for the images directory? For example -
Alias /i/ "....path to images directory..."If not, then that's probably the cause of your problem. If you do have that entry, then check that the path is correct, and check that the permissions on that directory are such that the user that the webserver is running as can access the directory. -
Can't log in as WebDB administrator after install
Can't log in as WebDB administrator after install. At http://mymachine.mydomain.com:7777/pls/htmldb/htmldb_admin/
username = admin
password = my password during the installation
and then the page just hangs.
I think I have a configuration problem with marvel.conf. Can anyone help?
Here are the relevant details that may help diagnosing the problem.
I can get to the HTTP Server page at http://mymachine.mydomain.com:7777/
Environment Fedora core 4 Linux on a x86 PC with 512m memory
Oracel Database version 10.2.0.1.0 -- runs fine considering there is only 512 of memory
Installed Companion CD (comes with WebDB 1.6)
Upgraded to WebDB 2.0
Installed patch bug4554072
-- All installs were semi painful but error free
my marvel.conf
Alias /i/ /u01/app/oracle/product/10.2.0/companion/htmldb/images/
<Location /pls/htmldb>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlDatabaseConnectString mymachine.mydomain.com:1522:devel ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDefaultPage htmldb
PlsqlDatabasePassword mypassword
Allow from all
</Location>
AddType text/xml xbl
AddType text/x-component htc
my dads.conf -- I added nothing here
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
my .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1; export ORACLE_HOME
ORACLE_SID=devel; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
#LD_ASSUME_KERNEL=2.4.1; export LD_ASSUME_KERNEL
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
-- I can connect to the database as HTMLDB_PUBLIC_USER
SQL> connect HTMLDB_PUBLIC_USER/mypassword@devel
Connected.
SQL>
-- the HTTP_Server seems to be working fine
$ /u01/app/oracle/product/10.2.0/companion/opmn/bin/opmnctl status
Processes in Instance: standalone
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
HTTP_Server | HTTP_Server | 2544 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
my error.log
[Tue Mar 7 18:46:53 2006] [notice] FastCGI: process manager initialized (pid 20766)
[Tue Mar 7 18:47:02 2006] [notice] Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server configured -- resuming normal operations
[Tue Mar 7 18:47:02 2006] [notice] Accept mutex: fcntl (Default: sysvsem)
[Tue Mar 7 18:52:42 2006] [error] [client 192.168.1.47] [ecid: 1141775562:192.168.1.46:27172:0:6,0] File does not exist: /u01/app/oracle/product/10.2.0/companion/htmldb/images/javascript/htmldb_get.js
[Tue Mar 7 18:52:42 2006] [error] [client 192.168.1.47] [ecid: 1141775562:192.168.1.46:27172:0:7,0] File does not exist: /u01/app/oracle/product/10.2.0/companion/htmldb/images/css/htmldb_V2.css
[Tue Mar 7 18:58:18 2006] [error] [client 192.168.1.47] [ecid: 1141775898:192.168.1.46:20917:0:9,0] File does not exist: /u01/app/oracle/product/10.2.0/companion/htmldb/images/javascript/htmldb_get.js
[Tue Mar 7 18:58:18 2006] [error] [client 192.168.1.47] [ecid: 1141775898:192.168.1.46:20917:0:10,0] File does not exist: /u01/app/oracle/product/10.2.0/companion/htmldb/images/css/htmldb_V2.css
my access.log
192.168.1.47 - - [07/Mar/2006:18:51:40 -0500] "GET /pls/htmldb HTTP/1.1" 302 5
192.168.1.47 - HTMLDB_PUBLIC_USER [07/Mar/2006:18:51:49 -0500] "GET /pls/htmldb/htmldb HTTP/1.1" 302 5
192.168.1.47 - - [07/Mar/2006:18:52:42 -0500] "GET /i/javascript/htmldb_html_elements.js HTTP/1.1" 200 15990
192.168.1.47 - HTMLDB_PUBLIC_USER [07/Mar/2006:18:52:42 -0500] "GET /pls/htmldb/f?p=4550:1:8908757969697315233 HTTP/1.1" 200 5078
192.168.1.47 - - [07/Mar/2006:18:52:42 -0500] "GET /i/javascript/htmldb_get.js HTTP/1.1" 404 366
192.168.1.47 - - [07/Mar/2006:18:52:42 -0500] "GET /i/css/core.css HTTP/1.1" 200 6032
192.168.1.47 - - [07/Mar/2006:18:52:42 -0500] "GET /i/css/htmldb_V2.css HTTP/1.1" 404 359
192.168.1.47 - - [07/Mar/2006:18:52:42 -0500] "GET /i/htmldb/oracle_htmldb_logo.gif HTTP/1.1" 200 3213
192.168.1.47 - - [07/Mar/2006:18:52:42 -0500] "GET /i/htmldb/builder/1px_trans.gif HTTP/1.1" 200 43
192.168.1.47 - HTMLDB_PUBLIC_USER [07/Mar/2006:18:58:13 -0500] "GET /pls/htmldb/htmldb_admin HTTP/1.1" 302 5
192.168.1.47 - HTMLDB_PUBLIC_USER [07/Mar/2006:18:58:18 -0500] "GET /pls/htmldb/f?p=4550:10:3783099702329307520 HTTP/1.1" 200 4081
192.168.1.47 - - [07/Mar/2006:18:58:18 -0500] "GET /i/javascript/htmldb_get.js HTTP/1.1" 404 366
192.168.1.47 - - [07/Mar/2006:18:58:18 -0500] "GET /i/css/htmldb_V2.css HTTP/1.1" 404 359rmelideo,
Firstly, you refer to "WebDB administrator" and "WebDB 1.6". This is not WebDB. You're confusing this with an entirely different product released in the late 90's.
You don't say what your specific error is. But the file does not exist errors in your Apache error log look suspicious. It looks like you have not copied the images directory from the HTML DB 2.0 distribution.
Joel -
After downloading OSX Mavericks, my AOL mailbox has disappeared and all AOL messages have been lumped in the inbox along with my gmail messages. What do I have to do to get my AOL mailbox back?
Linking AOL and gmail? I don't know what that means. But if it means what I think it does - that you have the AOL and gmail servers chatting directly with each other through some configuration, I'd definitely disable that.
In general, the messages either aren't deleted, or aren't correctly deleted, or there's a protocol or network error, or some sort of a mail server error.
First diagnostic is a mailbox repair. Mail.app > Mailbox > Rebuild
Then verify that the credentials are correct and the connection is reliable:
Mail.app > Window > Connection Doctor
And yes, if you have gmail and AOL chatting directly with each other, undo that. -
install OSX Maverick ...thereafter i cannot sycn my iCal with my iPhone. Any solutions, advice?
Hi
Yes got it resolved...looks like it got to be through iClouds. Can't do it any other way. -
I can't Log Out/ Restart/ Shut Down after updating to Mavericks
I can't Log Out/ Restart/ Shut Down after updating to Mavericks.
When I choose the above options nothing happens.
MBPr can only go to sleep.
When i force quit loginwindow from Activity Monitor nothing happens.I can sudo reboot /shutdown
I tried several solutions on other threads nothing worked. -
Cannot Log In to AT&T after update to Firefox 14.01. Chrome OK
After updating Firefox from 13.01 to 14.01, I cannot log into my AT&T account. The log in web page loads normally, but when I fill the name & password fields and enter, it returns to the entry page, no error message, blank fields.
13.01 worked as it should and so does Chrome.
Hope you can help me with this!
AlWhen you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
1. Clear Firefox's Cache
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
2. If needed, delete the site's cookies here (this will log you out)
While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
Then try reloading the page. Does that help? -
Cannot print to HP LaserJet 1020 after installing Reader XI 11.0.03
After installing the Acrobat Reader 11.0.3 update, I cannot print to my old, reliable HP LaserJet 1020 from Acrobat Reader and many other applications at all. Am using Win 7 64-bit. Also have Acrobat 7 Standard and PDF-Xchange 4.0, both of which have become semi-broken after installing the Acrobat Reader 11.0.3 update as well.
One of the things I have experienced in the past with printing PDFs is that it would hang in the print queue. There is a manual method of deleting the print documents in the print queue. But the issue is printing PDF documents that are scanned in and has maybe highlighted text or handwritten notes on the PDF. The printer driver can render it correctly if printing the PDF as a text document. What you have to do is change it so that it prints as a PDF image instead.
To print as an image, open the PDF then click File then click Print. Click the Advanced button on the following window that pops up and select the check box "Print as image".
Now to clear your print queue will be key prior to doing this if the print job is hung in the print queue.
Here is a Microsoft KB Article that explains how to do this. I think it has an available Microsoft Fixit tool you can use as well.
http://support.microsoft.com/kb/946737 -
Cannot enter text in Elements 11 after installing PS CC and LR 5
After downloading installing PhotoShop CC and LightRoom 5, I cannot enter text in PS Elements 11. I get the message that "something prevented the text engine from being initialized."
How do I correct this?Did you reboot the machine after installing the new applications? In windows 7 and Windows 8 it is almost always required to reboot the machine. sometimes it does it automatically but sometimes it doesn't but it is a good idea to manually RESTART the machine.
Hope this helps. -
Can't log in to many sites after installing 11.9
After installing 11.9, log in pages at various sites (thru Firefox 25) never go anywhere after submitting info, either get neverending loading circle or a reloaded blank log in page. In Safari (5.1), some sites will let me log in, some don't. It's very buggy when I do get 'in' a site; I usually have to click on a bookmark of website's home page for it to show I'm logged in (reloading sign in page doesn't do it). Using Mac, 10.7
Here's the thing. This is a screenshot from a login page:
Agreed?
Here's the source code from that same page:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<base href="https://cp.server302.com/"/>
<link href="favicon.ico" rel="icon" type="image/x-icon" />
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Control Panel :: Login Page</title>
<link rel="stylesheet" type="text/css" href="css/style.css" media="all" />
<!--[if IE 7]>
<link rel="stylesheet" type="text/css" href="css/ie7.css" />
<![endif]-->
<script type="text/javascript" src="js/jquery-1.6.4.min.js"></script>
</head>
<body class="login" onload="document.getElementById('user_login').focus()">
<div id="header"></div>
<br class="clearfloat" />
<div id="login">
<form name="form1" method="post" action="login.php?coming_from=&">
<input type="hidden" name="try" value="1" />
<input type="hidden" name="form1_submit" value="1" />
<ul class="input_list">
<li><span class="small_width">Username:</span><input type="text" id="user_login" name="myuser" class="medium_width" /></li>
<li><span class="small_width">Password:</span><input type="password" name="mypass" class="medium_width" /></li>
</ul>
<input type="submit" name="Submit" class="login_button" value="Login" />
</form>
<div id="form2_container" style="display: none;">
<br class="clearfloat" />
<form method="post" action="forgot.php" name="form2" >
<input type="hidden" name="form2_submit" value="1" />
<ul class="input_list" id="forgotpass">
<li><span class="small_width">Domain name:</span><input type="text" class="medium_width" name="domain" /></li>
<li class="hittext">If you have lost or forgotten your password, type your domain name and press Retrieve. You will receive instructions on how to regain access to your Control Panel at your e-mail address on file.</li>
</ul>
<input type="submit" name="Submit" class="login_button" value="Retrieve" />
</form>
</div>
</div>
<br class="clearfloat" />
<div class="login_footer">
<b class="lostpassword"><div><a onclick="if(getElementById('form2_container').style.display == 'none'){ $('#form2_container').show();} else {$('#form2_container').hide();} ">Forgot your password?</a></div></b>
</div>
</body>
</html>
There's NOTHING Flash in ANY of that. It uses HTML and PHP. Nearly every login page in existence uses similar code unless... the entire page is built into a Flash container. -
Cannot publish a webtemplate to portal after installing Bw700SP10_1000-1000
After installing SP 10 for frontend, the menu option in the WeB Application Designer: Publish to portal does not work anymore.
I have encountered a similar problem after applying SP 10 and Kennel 83. For publishing from BEx Web Application Designer: In the menu bar, choose WEB Template >> Publish >> to the Portal. I expect to see the portal content folders . Instead I get the following error:
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object(s): portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex3x).
Exception id: 05:45_11/12/06_0001_107772150
See the details for the exception ID in the log file
Any suggestions on resolving this is appreciated
Regards,
Andrew -
Cannot log in to SQL*Plus after initial login
Hi all,
I have an irritating problem that I am hoping that you can help with. I installed Oracle 10g on RedHat Linux ES 3. Everything seems to be working fine as long as I do not log out my oracle user. If I leave the user logged in everything works as expected. Once I log out, when I log back in I cannot access SQL*Plus normally.
I enter: sqlplus my_user/my_password
I get this:
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Sep 27 11:59:01 2005
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27123: unable to attach to shared memory segment
Linux Error: 22: Invalid argument
Additional information: 1
Additional information: 360457
But, if I enter it with the connection string: sqlplus my_user/my_password@ora1 then it works fine.
I get the same behavior through VNC. As long as I never log out of VNC but just close the session, logging in to SQL*Plus works as normal.
Any thoughts? My ORACLE_BASE, ORACLE_HOME, and ORACLE_SID seem to be correct.
Thanks,
MikeHi,
Kill the shared memory process and restart your database.
Regards,
Umair -
Cannot log onto MySQL CMS Database after network installation
Post Author: matthewh
CA Forum: Authentication
I've just installed Crystal Server XI R2 on a brand new server running MySQL 5.0.45 but when the installation completes it says it can't log on to the CMS database. It's created the empty database and I have the db.opt file in there but nothing else - no tables or anything. I've re-run the installation and done a repair and Modify but with no change. The CMS user has full rights to the MySQL instance for now, so it shouldn't have been an issue. Is there a SQL script available I can run to build the initial db manually? Do I need to uninstall and go through it all again? took over 2 hours across the network and the server is in another part of the country.Post Author: TAZ
CA Forum: Authentication
Hi Matthew,
I'm not sure why you cannot access your mysql DB but you do not have to reinstall.
Launch the CCM(central configuration manager) If the CMS is not stopped then stop it.
double-click on the CMS choose configuration, choose specify, choose recreate the current data source.
This will reinitialize the CMS DB if the account configured has the proper permissions. It should be a DB owner
Regards,
Tim -
Cannot log into windows network account after Bootcamp install
Hi All,
I have a 27" Intel i3 iMac with Mountain Lion 10.8.7. Its connected to a windows server. To access my account on the Mac I log in with a username and password. Yesterday I had Bootcamp with a 32bit version of Windows installed. After the Windows was installed successfully, my 'Helpdesk' had to remote access in and run patches on the windows installation. All good so far.
I tried to log into my mac account this morning with username and password. There is a little red light beside your username. I had no luck what so ever. My account has vanished of my mac. I could 'locally' log in under the adminstrator account. There was no sign of my account in the users & groups.
I had back upped my files except for the download folder. I eventually found the download folder and was able to back that up.
please please can someone explain what has happened here.
My IT guy has no Apple trianing and wants to remove my mac and replace it with the a PC because they support them. I feel it was a bad bootcamp installtion done by the IT tech, he did mention that he installed a 32 bit windows instead of a 64 bit. Its lack of trainign and understanding that has caused this.
I am trying to make an argument to say that it was simplay a bad Bootcamp installtion and try and find simliar cases to back it up.
Please helpMac partition was still there as I was able to log into the Administrator account on the mac. But when I went into users and groups there was no sign of my account. I'll agree it was a bad install, jsut need to explain it and back it up so that I can make that argument.
thansk -
Cannot log in to Mobile Manager after abnormal shutdown (issue & solution)
After an abnormal shutdown of database, an attempt to log in to Mobile Manager as Administrator fails with the error "Please verify your username, password and try again!"
I had a power outage in our office and our development server shut down abruptly as a result. When power was restored, the database, listener and GlassFish Server started up automatically (init.d and rc.d), but when I attempt to log in as Administrator using Mobile Manager, I get an error "Please verify your username, password and try again!". I did some research and after some trial and error, figured out that the services must be started in this order (this may not be guaranteed in automatic startup scripts?):
1. Oracle Listener
2. Oracle Database
3. Oracle GlassFish Server with Domain
If you are seeing this error, please try the following:
1. Shutdown Glassfish domain
./asadmin stop-domain <domain>
2. Shutdown Oracle database
SQL> SHUTDOWN IMMEDIATE
3. Shutdown Listener
$ lsnrctl stop
and restart in this order
1. Oracle Listener
lsnrctl start
2. Oracle database
SQL> STARTUP
3. GlassFish domain
./asadmin start-domain <domain>
This should work!
My environment:
Redhat Enterprise Linux 5.4 with JDK 1.6
Oracle Database 11g Enterprise Edition 11.1.0.1.0
Oracle GlassFish Server 3.1.2
Oracle Database Mobile Server 11.1.0 for 64-bit LinuxHi mario,
FYI
This issue can occurs when the primary and secondary Cisco ISE nodes' database are out of sync. For out of sync issues, which most likely are due to time changes or NTP sync issues, you must correct the system time and perform a manual sync up through the UI.
•For certificate expiry issues, you must install a valid certificate and perform a manual sync up through the UI.
•For a node that has been down for more than six hours, you must restart the node, check for connectivity issues, and perform a manual sync up through the UI.
For more information regarding this issue, please go through this link:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/troubleshooting_guide/ise_tsg.html#wp192802
Maybe you are looking for
-
lorsque je demarre une application j'ai ce message d'erreur: # An unexpected error has been detected by Java Runtime Environment: # EXCEPTION_FLT_STACK_CHECK (0xc0000092) at pc=0x00a0d0a9, pid=244, tid=3768 # Java VM: Java HotSpot(TM) Client VM (1.6.
-
PowerMac G5 DP 1.8GHz/GeForce FX 5200 - DELL 2407WFP 24" LCD compatibility?
Hi all, I am running Mac OS 10.3.9 (up-to-date) and would like to ask if there's anyone using and/or knowing about the following compatibility: PowerMac G5 dual processor 1.8GHz with NVIDIA GeForce FX 5200 (64MB VRAM) and DELL UltraSharp 2407WFP 24-i
-
Hi RSZGLOBV is used to find all variable from this table? how can i get text for that variable? any t-code or table is there to get variable text also?
-
Hello all - I just purchased a Yamaha A/V receiver (RX-V373) on clearance from Best Buy and I'm having some issues. I have a 50-inch Panasonic plasma TV and a DirecTV receiver. If I run HDMI from the DirecTV reciver to the Yamaha and then connect t
-
How to save a layer as an alpha channel?
Is there a way to save a layer as an alpha channel? So later i can use it as a slection?