HT6114 my audio midi setup is not working correctly since the install of maverick os

my audio midi setup is not working correctly since the install of maverick os

The upgrade may have reset to default settings ..
Check System Preferences > Sounds > Output
Make sure the correct device is selected and the Mute box is not checked.

Similar Messages

Audio MIDI Setup does not save connetion between Traveler and Nord

I have audio MIDI setup on 10.5.4, Mac G5 dual and a MOTU Traveler, with a Nord Stage connected to the MIDI port. Audio MIDI setup is on version 2.2.2. I am on the latest version of the Nord 4.0 (though that shouldn't matter), and the latest MOTU drivers as well.
Audio works fine. The problem is Audio MIDI setup refuses to save or remember the MIDI connection between the Traveler and the Nord. I have to reconnect it in the application every time I restart the Mac.
If I make the little connection and duplicate the configuration, the new duplicated configuration does not show the connection.
Everything else works fine. I have a Virus and a Remote 25 SL connected over USB MIDI, and the Novation works fine even with its 3 separate in/out ports. IAC drivers work fine; the PodXT occasionally gets a USB MIDI connection and it works fine as well.
The only thing not working is remembering the plain old vanilla MIDI cable connection on the Traveler.
This problem came in when I updated to 10.5.4 a few months ago (as a heavy user of Pro Tools and Digital Performer I've had to stay a little behind the curve for compatibility reasons).
Anyone seen this? Any ideas how to fix it?

You could muck around with permissions, you wouldn't have to boot from anothr system it's just a property list file. You can run disk utility now, or you could chmod it in terminal.
But it's far more likely that it has just become corrupt rather than aquired incorrect permissions. So just delete the ******* and have done with it:
/Users/Name/Library/Preferences/com.apple.audio.AudioMIDISetup.plist
(The app will make a new fresh one when you next run it)

When I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected the install then rolls back I have tried rein

when I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected the install then rolls back I have tried reinstall deleting files signing on with another account etc nothing works I have read this is an apple programing problem if so is there a fix I need iclouds thanks

This other discussion may help: Re: how do I install icloud

My pc has a virus I just downloaded song from pc to kids ipods now both ipods are not working correctly could the virus be in the ipods, if not why are both not working doing the same thing right after unplugging from pc.

Can an ipod get a virus from a pc that has a virus. After connecting two different ipods to my pc to download music they both are not working correctly, could the virus have transferred to the ipod, if not why would both ipods not work and be doing the same thing? When trying to click on a game it just stays on the main screen.

- I have not heard of a virus that can cause problem with an iDvice that has not been jailbroken.
- Try resetting the iPods. nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Do you hve problems with one game? The same game on both iPods?
Other apps?

Iphoto 9.2.1 leopard scrapbook theme not working correctly. THe opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there. It works fine in LION "only 1 image" on opening slide.

Hi.
iphoto 9.2.1 on iMac Leopard "scrapbook theme" not working correctly.
The opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there.
It works fine in LION "only 1 image" on opening slide.
All updated. Any suggestions
Thanks in Advance

Hi.
iphoto 9.2.1 on iMac Leopard "scrapbook theme" not working correctly.
The opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there.
It works fine in LION "only 1 image" on opening slide.
All updated. Any suggestions
Thanks in Advance

Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anyth

Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything. I have taken my car to my local dealer but they say the Radiosat is working ok?

Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling

SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
It is working correctly in the report manager.
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
           <Name Language="en-US">TAB delimited</Name>
       </OverrideNames>
       <Configuration>
           <DeviceInfo>
               <FieldDelimiter xml:space="preserve">	</FieldDelimiter>
               <Encoding>ASCII</Encoding>
               <UseFormattedValues>False</UseFormattedValues>
               <NoHeader>False</NoHeader>
               <FileExtension>TXT</FileExtension>
           </DeviceInfo>
       </Configuration>
      </Extension>

Hi Dave0323,
According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
file like below:
The result looks like below:
Reference:
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Browser not working correctly since I updated, help!

back and refresh button don't work since the last update, they do not show up as if I have not been to any other websites. Also the first tab will not close out, if I hit the X, it stays there, but if I close out the other tabs, it closes the entire browser. Also when I click a link and it is loading, it does not show that it is loading, it is as if I have not hit anything, then 30 or so seconds later it changes sites. What is wrong with my awesome browser, never had problems with it before?

Make sure Siri is On...
Settings > General > Siri > Siri On.
Troubleshooting Siri
http://support.apple.com/kb/TS4079

Group contacts did not work correctly since IOS 6

Hi Guys,
since update from IOS 5.1.1 to IOS 6.0 it isn't possible to show groups in Contact seperatly.
Neither on my IPHONE 4 and now on my IPHONE 5.
In IOS 5.x.x it was possible to list seperate groups.
I tried this with my ICLOUD Account and also with my GMAIL Account.
I need to have different group lists for my work - e.g "Private", "Work", ...
In IOS 5.x.x it was possible to list the contact folder, than click on "groups" and there it was possible to select the group i wanted.
Than I've only seen the contacts from the selected group.
Now since update to IOS 6 it doesen't work like this. There is only the opportunity to mark or unmark a contact group to list it seperately.
Can You explain how this is going to work on IOS6 ??
Or do You know an application to group contacts seperatly.
I set up my GMAIL Account as "Exchange Account" to see the contact groups.
It's nessecary that it syncronises correctly with my GMAIL Account, because I also use an IPAD.
I've over 250 contacts, so it has to work correctly.
I can't understand, why apple removed this feature in IOS 6.
I hope you know what I mean.
Very nice greetings
Roland

Do you really have them all? I created a group I wanted and synced the phone. Now my phone contacts has 2 groups, all contacts and phone contacts. However, when I scroll to the bottom of the contacts list, both show the same 164 contacts, not all the 470 contacts in my address book. I have just the contacts I wanted, but it is confusing by having the "all contacts" list on the phone. They are really just the same lists.

Usb hotspot is not working anymore since i installed itunes 10.6.3

USB hotspot is not working anymore... since i installed itunes 10.6.3
Please help me... how can i fix it.
I have wondows 7.

1.- Thanks for answering.
2.- I think I did not explain myself properly: The iPod is detected by both Windows and iTunes 10.5.3 64bit version.
The problem lies in that now after all the failures and the loss of my music (imagine I have to rip my entire CD collection again) whenever I try to sync my iTunes collection to my iPad (either on a single batch or album by album) a -50 o -69 error appears.
UPDATE: Now whenever I connect my iPod to the computer, it is recognized by Windows, but iTunes tells me that I have to restore it.
I cannot but commend Apple Inc. on his efforts to make a 9 months iPod unsuable. Sincerely this has brought me back to the worst of the 90s with MS.
UPDATE 2: Please let me add that with the previous iTunes version everything was ok. But, as soon as I installed the new Itunes (10.5.3 64bit) version the misery began. Unfortunately when I try to install the previous version I'm not allowed by the program and am referred to the newest buggy one.
Message was edited by: jesuslpgc

Photos app and Calendar not working correctly since upgrade.

I was trying to insert a photo into a Word document. When I go to the finder the photos app is grey. I cannot chose it or find my pics. Why? I tried dragging and dropping. That doesn't work either.
My calendar has been working fine since I upgraded, until today. I powered on today and my calendar is blank. I have TONS of stuff saved on there. I have gone through the preferences and checked all settings, everything looks fine. I even re-entered things just to let it refresh, to no avail. Any suggestions.
I am on a Macbook Pro (early 2013).l
Thank you

Do you have a backup? If so, try this for Calendar.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library/Calendars and restore from the backup.

Sound does not work correctly all the time, on youtube.

So I have been having this issue for a while now, and I have tried everything to fix it on my own.
My issue is sometimes you-tube videos will play about 1-2 sec of sound then stop, the video will buff all the way out and I can watch it but no sound will come from it. Once it happens if I try to watch another video they will all have no sound, but if i start up itunes it will still play music, so it's not my PC.
Once I close Firefox and reopen it 80% of the time it will play sound on the same video, the other 20% of times it will play 1-2secoinds of sound again and quit playing sound, if I restart fire fox again it will play just fine. Also I do not seem to get this issue with internet explore.
Stuff I have done.
Check for updates for my video/sound cards.
Uninstalled/installed flash 3 times even downloads the Adobe Flash player uninstaller, then reinstalled flash again.
Unchecked enable hardware acceleration, in the Adobe Flash setting.
My setup
Firefox 3.6.13
Windows 7 64bit
ATI HD radeon HD 4350 video card.
I have my PC connected to my TV, sound/video is carried with a HDMI cable from my video card.

Did you check the settings for Firefox in the Volume Mixer?
See also:
* [[No sound in Firefox]]
* [[Video or audio does not play]]
* http://kb.mozillazine.org/Video_or_audio_does_not_play
You can also try to clear the Flash cookies and settings.
Flash Website Storage Settings panel:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
See also Flash Local storage settings:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

ICal does not work properly since the last OS update

Hi everybody,
I run a Macbook 15 Retina RAM 16Gb with Mac OS 10.8.4. Over the past months (I think after updating the OS), iCal has not been working properly. TO make a long story short, as you can see on the screen cap, it is no longer possible to select the kind of calendar/color etc when right clicking. In order for example to create a "Meetings" event (see left column on the screen cap), what i need to do now, is to find a previous event (i.e. created before iCal stopped to work) then copy and paste it to the time when I want it to happen in the future and then modify it. Not convenient at all.
This is kind of surreal (that such a bug has not been fixed yet) to given the price of the Mac and that iCal is part of the core apps of the OS. I looked over the Internet and did not find a solution. But I must have missed things. Hence I would be very very grateful if anyone could help me.
Thanks a lot.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Customer Ext Variable is NOT working correctly in the Restricted Key Figure

Hi all,
   I have created a variable ZVCBLMTH (Period from 01/1996 to Last Month) with reference to
    0CALMONTH and it will be populated through Customer Exit and it works fine.
    In the selection for 0CALMONTH, I gave the range as '05/2008' to '08/2008' and this new
    variable passed the value of range as '01/1996' to '04/2008' in RSRT.
    The properties of the variable are:
          Type of Variable - Characteristic, Processing by - Customer Exit, Variable Represents - Interval
          and Variable is - Optional.
          No change in the result after changing the 'Variable is' from Optional to 'Mandatory'.
This variable is used in Restricted Key Figure to calculate the number of matching records between
   01/1996 & 04/2008 and somehow it is not recognizing this variable and NOT passing the results correctly.
   But, there are records with 0CALMONTH between 01/1996 & 04/2008.
   How could I test that which value is passed into the Restricted Key Figure for this variable, PLEASE ?
   Thanks in advance.
Regards,
Venkat.

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Javascript is not working correctly in the jsp

Hello experts,
i have problem with javascript. Actually i am written a javascript function isInteger(s) for checking wether
the entered string is numberic or not. But its not wroking(can't display alert message). Means it not calling the function. If i try this javascript in different html page its work but in jsp pages its not calling the javascript function.
This jsp page require some settings or anything, then help me.
Edited by: andy_surya on May 4, 2009 11:04 AM

<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Untitled Document</title>
<script language="javascript">
function isInteger(s)
    var i;
     s = s.toString();
     var o;
     o=s.length;
         for (i = 0; i < o; i++)
              var c = s.charAt(i);
                 if (isNaN(c))
                    alert("Given value is not a number.\n Remove It. \nAnd Try Again.");
                    return false;
         return true;
</script>
</head>
<body>
<input type="text" name="txtbx1" size="25" onkeyup="isInteger(this.value)" />
</body>
</html>

HT6114 my audio midi setup is not working correctly since the install of maverick os

Similar Messages

Maybe you are looking for