HT6114 my current system is 10.6.7 and won't upgrade. Need help

Can't access itunes because my system will not update on it's own

Which Mac do you have ?
If you are trying to upgrade to v10.9 Mavericks, check the requirements here > OS X Mavericks: System Requirements

Similar Messages

My Iphone 4s is not being recognized by itunes at all. There is no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

My Ihone 4s is not being recognized by Itunes.There seems to be no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?

My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

I currently own Elements 10 for PC and want to upgrade to Elements 12 for MAC. Is there a MAC version?

I currently own Elements 10 for PC and want to upgrade to Elements 12 for MAC. Is there a MAC version?

mommag
Yes there is a Premiere Elements 12 Mac.
Premiere Elements versions are standalone programs. So you would be purchasing a new program with its serial number.
Upgrade typically goes to a price break if you have a prior version of Premiere Elements and you purchase from Adobe Sales direct.
Years ago, a user could purchase at a local retailer and get "rebate from Adobe" based on having an earlier version. I have not seen that anymore (for years).
Remember Premiere Elements 10 Windows projects do not work in Premiere Elements Mac (any version) and the other way around also.
Also Premiere Elements Mac does not have all the attributes that Premiere Elements Windows has. One example, if you work with green screen, know that Premiere Elements Mac does not have the Green Screen Key, Blue Screen Key, or Chroma Key Effects.
Please let us know if we have targeted your question.
Thank you.
ATR

HT6114 Hi, I can not open the Work and Excel now, can you help me?

I can not open Work and Excel now.. I have this computer for 3 years, Can you help me.
Eva

What ver of Excel? You need 2011 or 2008

Svchost.exe - System error - "xul.dll is missing from your computer" need help resolving, I have uninstalled software 5 times, deleted folders, cleaned Mozilla entries out of registry and still get same message - aghhhhhhh!

get the message every time I login - when firefox is installed and even after it has been uninstalled

Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
tt2

Currently have FCE 3.5--cost and benefit of upgrading to FCP, or FCE 4?

Hi
I'm getting ready to do some video production in earnest (youtube music videos mostly, some sketch comedy as well perhaps) and am wondering if upgrading to 4 is worthwhile, or even going to FCP.
I've got some footage already and am considering buying a Sony SR12 for further shooting...
Thanks!

Well, on a Mac that's running 10.5.2 and probably QuickTime 7.4.5 or later, I would lean toward FCE 4 for stability into the future. I'd remove all vestiges of FCE 3.5 from the machine and then install FCE4. (ps You don't have to remove SoundTrack if you are using it and want to keep it). And you only need to purchase the FCE4 upgrade; you will enter both the v3.5 and v4 serial numbers when you install FCE4.
The basic editing capabilities are the same and FCE 4 added support for AVCHD on Intel Macs plus some FXPlug filters.
As for FCP, if your target is YouTube videos, I can't imagine what you would need FCP for.

Charm implementation: No maintenance cycle is open for the current system

Gurus,
I'm in implementation project to use charm.
I've created SDCR using charm_create, and choose transaction type subject "Development (implementation)"
After approving the change request, so that the status become "Approved", I re-open the request to set into "in development", but there's error:
"No maintenance cycle is open for the current system"
I've checked notes and search the forum but not relevant to my subject.
Please help.
Regards,

Hi Cesar,
I'm facing this issue now. I have followed Dolores blog
- The IBase is wrong: The IBase/component must represent the production system in the project landscape. RP1 is my production
- Lack of authorizations: Assign role "SAP_SOCM_ADMIN" or "SAP_CM_ADMINISTRATOR_COMP" (or equivalent) to the user who would like to approve the change request. I have updated all roles and given the users SAP_ALL
- Project is locked in table /TMWFLOW/PROJMAP: If an error is detected during the processing, then the project might be locked in this table. The customer can unlock it by pressing the refresh button under tab "System Landscape" -> "Change Requests". If there are other error messages shown during the refresh process, the customer must fix those errors beforehand. Refreshed it many times without errors
I'm on the latest level of Solman 7.1 SP8, I have implemented all the new notes as well.
I have attached a screenshot
To me it seems like a bug, but haven't found anything on marketplace. Any help is much appreciated.
Cheers
Jimmy

Hi, I am running CC in 32 bits and planning to upgrade to Windows 8.1. Will I be able to upgrade CC to 64bit within my current membership ?

Dear all
I read that LR 6 will not work on my current Windows 7 32 bits installation. So I am thinking about upgrading to Windows 8.1 (64 bits). I guess it will also be very beneficial for PS.
My question is: am I entitled to upgrade my CC to 64 bits with my current membership ?
Thank you very much
Michel

CC doesn't care for "bit-ness" as a licensing criteria. Users who already run 64 bit systems have access to all versions, including native 64bit as well as 32bit. thus you will simply install the programs just like on your current system with no extra hocuspocus and they will default to the 64bit versions where available. That being so, the bigger concern should be to have compatible versions of your plug-ins or any device drivers e.g. for printers.
Mylenium

System error in program CL_RSR_RRK0_SELECTION and form COLLECT_CHAFIX-02

Hi All,
I'm getting this error while running my Query, after executing the selection screen.
System error in program CL_RSR_RRK0_SELECTION and form COLLECT_CHAFIX-02
Please help .
Thank you,
Ketan Zare

Hi All,
Re-generating the query is not helping.
I think i'll have to go with applying notes.
Lets see, if notes solve my problem.
Thank you,
Ketan Zare

System error in program CL_RSR_RRK0_PARTITION and form BROWSE_02-03-

Guys,
I'm getting an error when i filter something in BEX Analyzer.
For Eg, I have an Material Free Characterisitics, executed the Query Successfully. After that in Workbook i'm trying to filter Material Values.
It Shows the error as " System error in program CL_RSR_RRK0_PARTITION and form BROWSE_02-03- "
Plz help its urgent ...
Regards,
SK

Hi Chetan,
Thanx for your reply.
But we already applied the Notes : 983354.
Have a problem only with ~BROWSE_02-03-
Still its showing error....
Regards,
Sathish

How to load a class dynamically in the current/system class loader

I need to dynamically load a new jdbc driver jar to the current/system class loader... Please note that creating a new classloader will not help since the DriverManager refers to the systemclassloader itself.
Restarting the application by appending the jar to its classpath will solve the problem but I want to avoid doing this.

Did you then create a ClassLoader to load the JDBC
driver and then install it into the system as
directed by the JDBC specification (ie
Class.forName(someClassName))?
And then try to use it from a class loaded fromsome
other ClassLoader (i.e. the system class loader)?
If you did not try this please explain why not.O.K. I just looked at the source to
java.sql.DriverManager. I did not know what I was
talking about, as what I suggested above will not
work.
This is my new Idea:
Create a URLClassLoader to load the JDBC driver also
in this ClassLoader you need to place a helper class
that does the following:
public class Helper {
public Driver getJDBCDriver(String driverClassName,
String url) {
try {
Class.forName(driverClassName);
Driver d = DriverManager.getDriver(url);
return d;
catch(Exception ex) {
ex.printStackTrace();
return null;
}Now create an instance of the Helper class in the new
ClassLoader, and call its getJDBCDriver method to get
an instance of the driver (you will probably have to
create an interface in the root class loader that the
Helper implements so that you can easily call it).
Now from the root classloader you can make calls
directly to the returned Driver and bypass the
DriverManager and its restrictions on cross
ClassLoader access.
The only catch here is that you would have to call to
the returned Driver directly and not use the Driver
Manager.This sounds like will work but I did not want to load DriverManager in a new classloader.. I did a hack
I unzip the jar dynamically in a previously known location (which I included in my classpath when launching the app). The classLoader finds the class now though it did not exist when the app was launched !
A hack of-course but works eh ..

How do I copy over files from "Previous System 1" to my current system

Hello.
I was having trouble with starting up my computer. I used a friend's computer to check Apple's Knowledge Base. The suggestion was to perform an Arhive and Install and to select the option of preserving my user and network settings.
I could not locate my Panther Install disc (my previous OS was 10.3.9). However, I did find my Jaguar 10.2 Install disc so I decided to use that instead (my disorganization is truly exasperating).
I thought once my system was again accessible (which it now is) I'd be able to reinstall Panther from the Archive even though I still can't locate my Panther Install disc. Is that possible?
I am, of course, having trouble using many of my 10.3.9 applications as they are incompatible with my currently loaded Jaguar 10.2 OS. I am unable to print, get my email, or use countless applications.
I'd sure appreciate help and suggestions as to how I might reaccess my 10.3.9 OS from the Archive so that I can avoid having to repurchase and reload Panther to get my original system back.
Is there a simple way to copy/move my previous system from "Previous System 1" back to my current system?
Thanks in advance for any suggestions.
Luna Monte
P.S. I foolishly neglected to maintain a back-up of my data onto an external disk. If I can get things back to where they were, I've learned my lesson.
iMac Flat Panel Mac OS X (10.2.x)

Lona:
Welcome to Apple Discussions.
As Kappy pointed out, you need Panther install disks to install Panther. However, you may be able to recover your data files from the Previous System Folder.
You can purchase Panther disks from applerescue. Your computer will support Tiger if it meets the minimum system requirements for Tiger.
Please don't hesitate to post back should you have further questions.
Good luck.
cornelius

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/

BSP: Use of dynpro services is not possible in the current system status

Hello,
in the component SRQM_INCIDENT_H i created a own button and eventhandler on the overview view.
Here in this eventhandler i´m calling an own method from an own class. This method is doing a RFC in our ERP system.
If i test the method this works fine.
If i call this method in my eventhandler i get BSP error:
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program ZCL_CRM_CS_DATA_SERVICES======CP
Include ZCL_CRM_CS_DATA_SERVICES======CM001
ABAP Class ZCL_CRM_CS_DATA_SERVICES
Method CREATE_CS_ORDER
Line 54
Long text -
Error type: Exception
Any ideas?
thank you
Best regards

Hi,
Web-UI cannot handle MESSAGE statements. if it's your own program, you should use the web-ui( view_manager->get_message_container or cl_crm_bol_core's global message container) alternatives to display the messages. If the message statement is being issued by a standard program, it's most usually deliberate attempt to fail on unrecoverable error. You can catch it by usin the try...catch CX_SY_MESSAGE_IN_PLUGIN_MODE ..where you call the standard functions.
Regards,
Arun Prakash

HT6114 my current system is 10.6.7 and won't upgrade. Need help

Similar Messages

Maybe you are looking for